Remote Site with its own CUCM Sub#2 and Router network failed and the site didnt keep its phones active, need some assistance
I have a Pub and 2 Sub's. Sub #1 is with the Pub, at the main site it is our TFTP server, Sub #2 is at a remote site with about 100 users along with a router and 2 PRI's for outbound calls. We had a network failure between the main site and the remote site and all phone lost their registration with the system until we were able to get the network back up. Currently the network is up in a crippled state on a 1 T-1 link while we troubleshoot the bigger issue with our 6mb pipe, however Sub #2 and its associated router arent talking with the PUB or other Sub. I'm still getting alerts every 30 minutes stating they are the server is down. I'm sure once the network is corrected this will bring everything back on line. My question is how can I prevent in this in the future. I need this site to be stand alone if the network goes down again. I was told by our vendor that if we had a subscriber at each site then we would need SRST licensing. I know something needs to be configured to make it all work, I'm just not sure what.
I already have a group at the site but it includes both the Pub and Sub from the main site as well as the Sub from the remote site. I would only have to remove the Sub from the main site, problem is I currently only have 1 TFTP server it runs on SUB #1, should I make SUB#2 a TFTP server as well and the phones are setup for DHCP at the main site, I'm going to need to have a DHCP server setup at the remote site as well. Correct?
Similar Messages
-
I shared my itunes account with my daughter for many years while she had only an ipod. She now has her own iphone with her own itunes account. Is it possible to transfer the purchases she made on my account over to her new itunes account?
No. Purchase always remain with the account they were purchased with.
-
my ipod & itunes are fully up-to-date with 4.2.1 for ipod and the itunes 11.0.1 and every app (ex facebook & ice cream jump says i need 4.3 version but when i click all updates say its all up to date. I have tryed restoring it 4 times to factory as well. Please help I have set-up over 10 ipods and differents generations and have never had this issue like this, I even have all ratings ristriction unchecked and payment info in itunes so i need help please
but i could download on others ipods in same gen, facebook and ice cream tower, everything i look up and try install always says that for apps so your saying that i can not ever download any apps to this ipod ever againÉ
-
help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?
There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. If not, the machine needs to be serviced. Inserting any kind of tool in the port may cause damage that won't be covered by the warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store. -
I have a Verzion iPhone 4s with iOS 7 installed on it and the friend my friends dose not seem like it is working, and it is when it is trying to find a certain person, it says location unavaiable, and the other person with the other iphone it friend my friend is on in locations service and on the verzion iPhone it is on
Little hard to understand what you are asking. Let me guess that this not an Iphone4S issue. Its a problem with your service provider. Contact them.
-
My grandson played with my 4th generation iPod touch and the phone icon and contacts icon are gone. I have gone to settings and done the "reset all settings" and "reset home screen layout" with no success. I also did a hard reset. No luck. I can get to my apps through the search screen but no icons.Help?
Try doing a Spotlight search for the Contacts app.
Read this for doing a search:
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/spotlight -search/
(Skip to the section for Spotlight on iOS)
(Note that my links to other pages may promote my organization, and this should not be taken as an endorsement by Apple) -
With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.
Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.
-
I just got a new iPhone 4 and the (-1) error keeps popping up on my screen as it is restoring filmware, what's wrong with it?
when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email
-
i didn't close my mac air down properly and when i tried to use it, the screen was frozen. I turned it off and restarted it, and the grey screen with the apple logo appear and the circle just keeps spinning. Can you advise?
Try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC) -
Updated my iphone with iOS7.0.3, still dont have the option to reject the call or reject the call with a message when someone call and the phone is in the lock screen? I was of the impression that this issue will be fixed with updates. Please see the screenshot.
Hello Beardsell,
This is when the phone is unlocked mode. My snapshot is when the phone is locked.
Remember when you get a call when the phone is locked and you used to have slide to answer in iOS 6 and if you slide up you would have options to reject, reject with a message and reject with a reminder. We dont have that in iOS 7. iOS 7 *****, I cannot get back to iOS6, apple needs to be user friendly. Screen shot 1 when the phone is locked, screenshot 2 when the phone is unlocked. -
i put a new sim card and a new number on this phone but for some reason it is paired with a Lady who can read all my texts how do i fix this?
You bought the phone from this lady right and she did not turn off imessage. Try turning off imessage and restart the phone. Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). Wait a few minutes and turn imessage back on
-
Currently using Photoshop CS5, but with a replacement computer and upgrade to Yosemite, keep being told I need to install the legacy Java 6. Currently, Photoshop won't even open. I absolutely do not want to subscribe, don't want to mess with the cloud, just want to buy an upgrade to something that will run for a while longer. I don't care about Lightroom, Bridge, Illustrator, etc.; most of those I've deleted over the years. But I do use Photoshop - or would if it would still run. What options do I have?
This is the java you need for photoshop cs5 to work on mac os x 10.10 Yosemite
https://support.apple.com/kb/DL1572?locale=en_US
It's also possible you may have to reinstall photoshop cs5 even after installing the above java, because sometimes the upgrade to mac os x 10.10 messes up the photoshop cs5 installation.
You can download photoshop cs5 from here if you don't already have the install media.
https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html -
I am Manually Deleting Songs from my Ipad2, but when I press Delete, it shows a Cloud with a Red Arrow pointing down, and the Song remains, how do I get rid of the Song completely?.
The cloud icon means that the songs are only in the cloud, they aren't stored on your iPad. You can turn off the showing of songs that are in the cloud via Settings > iTunes & App Store > Music (under the 'show all' heading) 'off'. If you want to some cloud songs to show but not all then you can hide the ones that you don't want via your computer's iTunes : iTunes Store: Hiding and unhiding purchases
-
my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best. -
has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?
Have you tried calling Apple tech support?
http://www.apple.com/contact/
Maybe you are looking for
-
when I install itunes i get error apple mobile device failed to start - verify that you have sufficient priveliges
-
Windows 8.1 Update 1 Enterprise Availability
My university offers Windows 8 Enterprise to students and staff. When 8.1 came out, Enterprise users couldn't get the update from the Windows Store and had to get it at the Volume Licensing Service Center (VLSC). Essentially, we had to wait on our IT
-
Cdparanoia 004: Unable to read table of contents header
Hi. I've been trying to rip wavs with grip but it was unable to locate any audio cd even though I could explore it from my desktop (xfce 4.10) and I am part of the optical group. Because of this, I tried running cdparanoia from the terminal. Running
-
Hi does anyone knows how to print just the wave form graph wit some sort of printVI? Thanks in advance, Best Regards, Thijs Boeree
-
Issues while starting soa_server1
Hi, I have installed SOA Suite 11g following instructions at this , but get big error stack when trying to launch soa_serve1. oracle.mds.lcm.exception.MDSLCMException: ORA-06550: line 1, column 12: PLS-00201: identifier 'MDS_INTERNAL_SHREDDED.GETREPO