Remote System and Remote Key Mapping at a glance
Hi,
I want to discuss the concept of Remote System and Remote Key Mapping.
Remote System is a logical system which is defined in MDM Console for a MDM Repository.
We can define key mapping enabled at each table level.
The key mapping is used to distinguish records at Data Manager after running the Data Import.
Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
Now, I have to look at Data Syndication and Remote key.
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
Regards
Kaushik Banerjee
You are right Kaushik,
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
Yes, but if they are duplicate, they needs to be merged.
But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
Pls refer to these links for better understanding.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
Hope this helps,
+ An
Similar Messages
-
Remote Control and Remote View Problem
Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Remote control and remote desktop client in sccm 2012 ?
What is the difference between remote control and remote desktop client in sccm 2012 ?
Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
Why you would use one over the other depends on your requirements.
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson -
Can i run remote profiling and remote debugging at the same time
can i run remote profiling and remote debugging at the same time .
i am using jdev9.0.5 and oc4j9.0.4 standalone server.i think i am wrong
-
SUSPEND and NOTIFY converted as remote hold and remote retrieval
The other side says that is sending SUSPEND and NOTIFY - SS7 messages which are converted as remote hold and remote retrieval on PRA.
It says those message are coming to my Cisco box (c5350-is-mz.123-18), but the IOS it is not able to interprete them correctly.
I am not seeing this messages in any debugs... Anyone have any idea about ?
Thanks
Robert
Attached is the debug i've got from the other sideWhat debugs are you getting on the access server? The remote side is trying to communicate with the access server but maybe the messages are getting dropped. Following link may help you
http://www.cisco.com/en/US/docs/routers/access/as5350/software/configuration/guide/54basic.html -
Create DB link between my local system and remote system
Hi,
I need help to create DB link between my local system Database and remote system database both the database are oracle.
Please check the script which i have written is correct or not. Its giving me error sql command not ended properly
create public database link MERU_PROD_LOCAL_PROD
CONNECT TO SUDHIR
identified by sudhir123
using (DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = 23.23.150.144)
(Port = 1521)
(CONNECT_DATA = (SERVICE_NAME = sudhir)
I am executing this command in my local system connecting to the remote database link. Please suggest me is this method correct.
Thanks
SudhirHi Hilton,
I fixed that issue. Now i am creating the DB link this ways please check is this proper or not
create or replace database link meru_prod_local_prod connect to portal identified by Oracle!123 using 'MERUPROD';
remote machine
User Name: portal
Password : Oracle!123
MERUPROD is the tnsora entry
It gives error as
Error starting at line 1 in command:
create or replace database link meru_prod_local_prod connect to portal identified by Oracle!123 using 'MERUPROD'
Error at Command Line:1 Column:18
Error report:
SQL Error: ORA-00922: missing or invalid option
00922. 00000 - "missing or invalid option"
*Cause:
*Action: -
Problem with childs nodes and automatic key mapping in a Data Object
Hi experts!
I'm doing the service order tutorial from the mobile help at [this link|http://help.sap.com/saphelp_nwmobile71/helpdata/en/21/9b5b924c3b434fba4767731794b029/frameset.htm] and I have a problem...
In the topic "Modeling the Equipment Data Object", says you have to mark the "Automatic Key Mapping" checkbox. So when I had to create a third child node ( the location node ) the system raised an exception with the message "Deselect automatic key mapping flag for more than two-level nodes". I'm trying deselecting the flag and creating the location node, but when I want mark again the automatic key mapping flag, this is disabled.
What can I do to solve this and create the three child nodes with the flag marked? It's a configuration thing?
Any help it's very welcome. Thanks in advance.
Best regards,
Simon.The thing is: Its not allowed to use automatic keymapping if you have more than two levels. This is why the message showed up, and this is why its been disabled.
What automatic keymapping does: Figures out automatically which child node belongs to which parent (by guessing from the field name and type, which fields in the child correspond to which key fields of the parent).
On three levels, this becomes more complicated => Its disabled.
How to do keymapping yourself instead of having the DOE do it automatically: Do 'Explicit keymapping' from each child to its parent. Explicit keymapping is done by clicking on the corresponding menu button in the child node. Here you need to associate child node fields (they need not be key fields of the child, but they are allowed to be that as well) to each of its parent nodes key fields (so that each child can be associated to its parent).
Cheers -
BRtools Two-Phase-Backup to remote disk and remote tape drive
Hello,
i want to two-phase-backup a SAP-System to a remote disk and from there to a tape drive.
Backup to remote disk works fine, but can i use brtools to write the backup-files from the remote machine to a tape drive that is connected to the remote machine?
I'm using SLES 10 on both machines.
I can't find anything on the SAP Documentation to this. It ist possible to backup to remote disk and to remote tape, but it is not clear that it works when in Phase 1 of the backup the files are written to a remote disk. It seems like i can only tell brtools to backup the files from a local disc to a remote tape-drive, is this right?
Thanks in advance for your help.
Regards
PhilHi Nirmal,
thanks for your answer.
But i can do disk to tape Backups, when i choose "Backup of Disk Backup" from BRtools, i see a list of all Backups i wrote to the local disk and can write them to remote tape by using pipe as backup device.
The only thing is, my Backups are stored on a remote disk, and from there it seems i have to write them to tape with cronjobs using a shell script. That's not my favourite solution, but it's ok.
Regards
Phil -
Remote Desktop and Remote Access
I am a very new Mac user but have extensive PC experience. I work in the IT industry and I find the use of Remote Desktop very useful. How can I setup my Mac to be able to access it when I am not at home?
What machine and operating system do you wish to access it from?
-
Remote Desktop and remote USB scanner
Hello, We currently use NeatWorks to scan our company receipts and docs. Several of our employees access the NeatWorks database remotely, via a locally installed NeatWorks application, the connection we use to the file is the simple Finder 'Connect to Server'. Because NeatWorks is not networkable, we access it one at a time.
The problem is the Neatworks database is huge, it can take 20 minutes to load remotely.
Our solution to this would be to use Remote Desktop to access our server that has the application and database for a quick load. The problem is scanning.
Can Remote Desktop connect to the users local USB scanner so that the scans go directly to the remote database? If not, is there any other elegant solution to this remote scan problem?
We were hoping to find a networkable program to replace NeatWorks that wouldn't load the entire database, just an index perhaps.
Thanks a million for any input!
JohnCan the NeatWorks application on the server, see, connect to the USB scanner device on the user end.
That would not be a function of Apple Remote Desktop. The NeatWorks software would need to have code to access a remote scanner, either natively or using the Scanner Sharing feature of Mac OS X 10.6 (if that will support the USB scanner you're using). -
Ethernet connection between remote computer and remote ax
My wireless system is Time capsule connected to the cable modem. Airport Express connects through the wireless network created by TC. My G5 is connected to the AX by ethernet. Initially the G5 was able to connect to the internet by the ethernet connection. I attempted to connect my MacBook but I was unsuccessful. Any help would be appreciated.
Thanks,
GordonSolved the problem. The wireless network has to be setup as a WDS network in order to connect a remote device by ethernet to a remote TC, AExp, or AExt.
-
Search for [Remote Key] and [Remote System] in Data Manager
Hello all
I would like to be able to search on the remote key and the remote system in the MDM Data Manager is that not possible? I thought I remembered seeing that possibility under the Free-Form Search but now I can't find it.
I have, however, found this in the Data Manager reference guide:
REMOTE SYSTEM AND REMOTE KEY FIELDS
MDM uses the remote systems defined in the Remote Systems table
within the MDM Console to store and maintain key mapping information
for each record or text attribute. It does this using a virtual key
mapping field that you never see in the MDM Client.
This virtual key mapping field is very much like a qualified lookup field
into a virtual key mapping qualified lookup table.
Key Mapping information stored in virtual lookup field
The Remote System and Remote Key fields are normally not visible;
however, they do appear in several places in the MDM Client.
Specifically, both fields: (1) appear in the File > Export dialogs in Record
mode for exporting value pairs; (2) are recognized by the File > Import
dialog in Record mode for importing value pairs; and (3) appear in the
Edit Key Mappings dialogs in both Record mode and Taxonomy mode,
for viewing and editing value pairs.
Is there any way to search on the value in the remote key from the Data Manager?Not sure search i think not possible.
But you can see keys as mentioned:
Enable Key mapping in Console.
MDM Client maens MDM Data Manager.
They do appear in several places in the MDM Client or Data Manager. Three different methods to see in DM are given already below:
Specifically, both fields: (1) appear in the File > Export dialogs in Record mode for exporting value pairs; (2) are recognized by the File > Import dialog in Record mode for importing value pairs; and (3) appear in the Edit Key Mappings dialogs in both Record mode and Taxonomy mode, for viewing and editing value pairs.
BR,
Alok -
Change remote system in sydnicator map
I have imported a syndication map from a remote system and want to duplicate the same map out to another remote system, how can i change the remote system value in the map properties?
Adam Sellers.Hi Adam,
When you are opening the MDM syndicator. Go to .. File>Connect to source
Here you can mention the Type and Remote system.The Remote system you select here gets reflected in your Map properties.
Now import The Exported Map.
Hope it helped
Thanks & Regards
Simona Pinto -
Syndication Search Using Remote System
Is there a way to use the Key Mapping's remote system as part of the search criteria for syndication?
I am not referring to the map property that allows you to suppress records that do not have a remote key.
For example, only send records when "remote system = DEV_100".
Thanks,
KeithHi,
When you create a map you have already defined the remote system for which is getting created and you have mapped key and name of that in the syndicator mapping.Suppose you craeted a map fro remote system DEV04
Now when you only want to syndicate the records for this remote system then you should define only this as a output remote systems and then if you have supressed records without key,then only records pertaining to the DEV04 system which have key will get syndicated and not others
Thanks
Vinay -
Remote system monitoring entry- data not relayed to Central system
Hello Folks,
I am trying to establish a central monitoring system for our client. I am trying to test it in the DEV environment first.
The central system is a Solution manager system (Dual stack- ABAPJAVA). I am trying to bring in monitoring data from the ECC development environment (ABAPJAVA).
First of, i created to RFC connections in Solution manager system, one for data collection and the other for analysis. I have maintained the host address of the ECC system as target.
Then i have created a remote system entry in Transaction RZ21--> technical infrastructure entered the 2 RFC names and have executed the function.
At this point i am only trying to bring in ABAP stack monitoring data form the ECC system so i have not generated the CSNCONF file.
Now when i look in Solution manager RZ20-->CCMS monitoring templates, i can't see any data for the the ECC system.
I guess i am doing something wrong. Am i looking in the wrong monitor set?
As additional information: Solution manager (SMD) and ECC (ECD) use different transport domains / transport groups. I dont know if this makes a difference.
Can some one please help.
Regards,
PrashantHi Prashant,
if I understand correctly your system shows only MTEs from R/3 Stack, not from the OS side, pls check your SAPOSCOL. Are the data in OS06 in your remote system correct and do you see the current data, refredhed all 10 seconds?
To check your environment, pls do the following:
in th efirst step check in RZ21 > in the Topology part the System Overview for your system connection to your back end system. Are the Read Destination Data RFC and the Destination Analysis RFC correct and works the authority chek fine?
In the second step pls check in RZ21 > in the Agents for Remotey SAP Systems part; are there registered your remote ccms agents correctly and works the connection test.
Stop the agents and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the read RFC destinations?
Start the agents and and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the CCMS Agent RFC destinations?
To rebuild the Monitor in the CEN system you could try to reset the node of your remote system in the warm up status > go in the remote system to RZ1 > go to local segments > change to edit > select your segments > reset segment in "WARMUP" status.
In the CEN system you coul try to go to the edit mode for the Agents for Remot SAP Systems > select your remote system and push the button Reinitialize Agents
In the back end system you can try to delete all MTEs in RZ21 > menu Technical Infrastructure > Reorgenize Segment Table > select the options with "ALL" in the CEN and the remote system to reorgenize all data.
Could you pls post for the missing MTEs a screenshot on the one side from the CEN system and on the other side from the remote system...
and last but not least you could try the following for missing OS MTEs
delete ALALERTS, ALMTTREE and ALPERFHI in /usr/sap/ccms/<SID>_<SNR> and check in the agents folder all trace and log files for errors.
Maybe you are looking for
-
MacPro Quad Core 32g Ram running slow Logic using only 9g in Activity Monitor
Well its taken a while, but this is my first foray into the world of forums! I'm so hacked off with this regular problem and havent been able to find anything anywhere to solve it i thought i'd see if anyone has any similiar issues and maybe even a s
-
REMOVING BLANK SPACE IN XML USING JDOM
<?xml version="1.0" encoding="UTF-8"?> <Person > <Employee1> </Employee1> <Employee2> </Employee2> <Employee3> </Employee3> </Person> I want to remove <Employee2> </Employee2> and my output should look like this <Person > <Employee1> </Empl
-
Xsan will not mount on clients
Xsan updated recently to 1.4. Problem started on 1.3 Working fine until reboot of one of the client computers. Now Xsan volume will not mount on any client. Updated to 1.4, ran cvfsck. Still no go. Volume is over 90%. I have read that this may cause
-
Increase 'archive_max_process' in oracle 10g
Dear Friends , I want to increase the value of 'archive_max_process' dynamically (i.e., alter system or alter database ) in my oracle 10g . Is it possible to do ?
-
After 1.1.1 can't move messages
After the 1.1.1 update, any message I try to move to another mailbox (move from trash to inbox etc.) just disappears! I've already done a complete restore through iTunes to no avail. Every other aspect of Mail, or the iPhone for that matter works fin