Remote update of a 1000 series LWAP

My company recently went from an old airspace 4024 with firmware 3-2-195-13 to a new 4402-50 running 4-1-185-0. Using Option 43 in DHCP allowed the new 4402 to see the AP's on different VLan's and Subnet's and issue IP addresses to the AP's and clients. It appears several of the AP's have not pulled down the new firmware and are stuck at 3.2. I have rebooted the AP's and tried multiple other tricks. Is there a Cisco utility that will allow me to update these LWAP's via mac or IP? Any suggestions would be appreciated. I'm sure I could go around, collect these AP's bring them back to the 4402's location throw it in layer 2, reboot and they would take the update but that is too time consuming of a process.

I know from experience that the 1131 and 1230 APs can't be upgraded from 3.2 to 4.1 because a 440x controller can't be upgraded from 3.2 to 4.1.
Check the release notes on the 4-1-185 software.
They state:
"Important Note: If you are running any lower version than 4.0.206.0 in 4.0 stream or if you are running lower version than 3.2.195.10 image in 3.0 stream , please upgrade the controller to 4.0.206.0 or higher for 4.0 stream and 3.2.195.10 or higher for 3.0 stream before loading 4.1.171.0 image."
They are suggesting that if you want your APs to upgrade from their current 3.2 software you must upgrade them to 4.0.x software first. Then you can upgrade to 4-1-185.
I would downgrade the controller software and see if the 1000 series APs will run the lower version. Then I would upgrade the controller to the latest software and verify that these APs are running 4-1-185 software.
Hope this helps.

Similar Messages

Remote update cs5 suites

We have about 15 clients with different cs5 suites and some lose photoshop/dreamweaver installs on the network. both microsoft and osx clients.
What is the best way to keep these clients updated without running around all the time?
Was looking for some console update options but can't find a thing about that.
Adobe has a nice deployment toolkit which was perfect for deployment.
Also read about hosting your own update server. But nothing in the docs about remotely updating the clients.
anyone some good advice for this?
thnx
Jerry

Hi Ashubijalwan1,
just to make sure there is no misunderstanding:
All Creative Suite Apps are updated except for the app with the name "Adobe Creative Cloud".
When I use the Creative Cloud Packager and select solely the core components, "Adobe Creative Cloud" is a part of them. The program itself shows a message saying that an update is necessary, but RUM won't update "Adobe Creative Cloud".
Best regards,
Tobias

Remote update manager and ausst

Hello,
I try to set up automatic updates for all creative cloud applications in our company. The AUSST is already working and a web-directory exists, but there are still some problems I cannot solve yet.
1. Does the remote udpate manager also use the AdobeUpdater.Overrides? If not, how can I use our internal AUSST Web Server for the remote updates?
2. Which option in the Creative Cloud Packager creates the folder \ProgramData\Adobe\AAMUpdater\1.0\ ?
3. Where does the Adobe Update Manager save the .overrides-file I chose in the Adobe Update Manager? Does this file also apply for the Remote Update Manager?
4. Is there any way to change the extended configuration parameters for a package after the installation
Thanks and regards,
Tobias

Hi Tobias,
Please find the answers outlined below.
1. Does the remote update manager also use the AdobeUpdater.Overrides? If not, how can I use our internal AUSST Web Server for the remote updates?
Ans: Setup RUM with AUSST : Creative Cloud Help | Using Adobe Remote Update Manager
2. Which option in the Creative Cloud Packager creates the folder \ProgramData\Adobe\AAMUpdater\1.0\ ?
Ans : Creative cloud packager doesn't create this folder. this is being created while deploying the update payloads.
3. Where does the Adobe Update Manager save the .overrides-file I chose in the Adobe Update Manager? Does this file also apply for the Remote Update Manager?
Ans: Override.xml is being generated manually using Adobe update server setup tool. In case you install the package without setting up an update sever under package configuration, it generates AdobeUpdaterAdminPrefs.dat.
4. Is there any way to change the extended configuration parameters for a package after the installation
Ans : Package configuration can't be changed once created once created.
Hope this helps.
Let me know in case you would need any further clarification.
Thanks,
Ashish

Remote update service on sony ericsson G502 does not work

I have a Sony Ericsson G502. The phone has a problem which causes it to restart when I am on a call. Sometimes it just restarts on its own. I searched on the net and found that other people have also seen the same issue and I believe a software upgrade will fix the problem.
I dont have the usb cable of the phone so I cannot do the upgrade using the 'Update Service' software from the pc. I tried doing a 'remote update service' from the phone in Menu-->Update Service-->Search for Update, but it just says that your phone is running the latest software. The current software version on my phone is 1203-8254 R1FA031 080512. Is this the latest software available? I have bought the phone 2 years back (but used it sparingly), and I am not convinced that there is no update to this software.
Please suggest a way I can upgrade this phone? I like the phone, but this restart problem makes the phone very unreliable for everyday use. Kindly help.

Your best bet is to get a USB cable and update the software with SEUS on your PC.If, as the remote update service tells you, you already have the latest software, you can only re-install the software via PC anyway.Alternatively, you can perform a master reset on the phone and see if that fixes the problem.Hope this helps.

Remote Update Manager on Yosemite doesn't start

Hi to all, I have recently updated my 15 iMac (year 2012) to Yosemite.
After the upgrade, the Adobe Remote Update Manager tool doesn't start, with an error 1.
In the console, I see these lines:
Any suggestions?
Many thanks

Same problem here on my wife's mid-2012 Macbook Air. Really annoying.

Remote Update Manager with AAMEE 2.1 deployments.

Hi,
I've noticed the AAMEE 3.1 Beta has some new options that integrate with Remote Update Manager and CS6 installation packages, that allows you disable updates, but still run them with Remote Update Manager. If I've deployed and Adobe CS5.5 package built with AAMEE 2.1, with the ability to install updates disabled, will I still be able to use Remote Update Manager to install updates to those deployments? Or will I need to continue to deploy them manually? If I want to deploy CS5.5 and use Remote Update Manager for updates, what settings should I be using in AAMEE 2.1 when I build my packages?
Thanks,
~Ted

Hi Ted,
RUM can also be used with CS5 & CS5.5 and by the sounds of it would fit in with your current configuration very well. If user's are non admins or you do not want each client pulling in there updates automatically then we would suggest turning off client updates in AAMEE and then using RUM.
Have you looked at setting up AUSST in your environment ? it is great to use in conjunction with RUM but you can of course just use RUM if you prefer.
Cheers
Karl
CS Enterprise Systems Engineer

Remote Update Server setup

Using the AUSST tool to set up a remote update server on Windows Server 2012R2 which is IIS 8.5.
Working through this document: http://helpx.adobe.com/creative-cloud/packager/update-server-setup-tool.html#Preparing a web server to use as the update server
Have reached the point where it says "Add the httpHandles for the zip, xml, crl, dmg, and sig extension in the web.config file as shown here:"
I have added the lines specified to the web.config file, here is the complete file:
configuration>
    <system.web>
        <compilation targetFramework="4.5" />
        <membership>
            <providers>
                <add name="WebAdminMembershipProvider" type="System.Web.Administration.WebAdminMembershipProvider" />
            </providers>
        </membership>
        <httpModules>
            <add name="WebAdminModule" type="System.Web.Administration.WebAdminModule"/>
        </httpModules>
        <authentication mode="Windows"/>
        <authorization>
            <deny users="?"/>
        </authorization>
        <identity impersonate="true"/>
       <trust level="Full"/>
       <pages validateRequest="true"/>
       <globalization uiCulture="auto:en-US" />
           <httphandlers>
             <add path="*.zip" verb="*" type="system.web.staticfilehandler" />
             <add path="*.xml" verb="*" type="system.web.staticfilehandler" />
             <add path="*.crl" verb="*" type="system.web.staticfilehandler" />
             <add path="*.dmg" verb="*" type="system.web.staticfilehandler" />
             <add path="*.sig" verb="*" type="system.web.staticfilehandler" />
           </httphandlers>
    </system.web>
    <system.webServer>
        <modules>
            <add name="WebAdminModule" type="System.Web.Administration.WebAdminModule" preCondition="managedHandler" />
        </modules>
        <validation validateIntegratedModeConfiguration="false" />
    </system.webServer>
</configuration>
But when I try to access the web site I get this: " The configuration section 'httphandlers' cannot be read because it is missing a section declaration "
Clearly I am a newbie in IIS (and indeed on Web Development of any sort).
Could someone please point out the no-doubt-obvious mistake?
Thanks.

I'm on 2012 R2 too.
ISAPI Module is not available by default. Choose to add ISAPI features (and Server Side Includes) using the Server Manager, Add Roles and Features, Web Server, Web Server, Application Development. I chose both ISAPI options as well as Server Side Includes - not sure which is needed.
Added Server Side Includes (as well as the ISAPI .xml .crl .zip .dmg .sig ) entries in Add Module Mappings (as per https://forums.adobe.com/thread/951308?tstart=0)
My HTTP Handlers section is as follows:
        <httpHandlers>
            <add path="*.xml" verb="*" type="System.Web.StaticFileHandler"/>
            <add path="*.crl" verb="*" type="System.Web.StaticFileHandler"/>
            <add path="*.zip" verb="*" type="System.Web.StaticFileHandler"/>
            <add path="*.dmg" verb="*" type="System.Web.StaticFileHandler"/>
            <add path="*.sig" verb="*" type="System.Web.StaticFileHandler"/>
      <add verb="*" path="*.rules" type="System.Web.HttpForbiddenHandler" validate="true"/>
      <add verb="*" path="*.xoml" type="System.ServiceModel.Activation.HttpHandler, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="false"/>
            <add path="*.svc" verb="*" type="System.ServiceModel.Activation.HttpHandler, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="false"/>
            <add path="trace.axd" verb="*" type="System.Web.Handlers.TraceHandler" validate="True"/>
            <add path="WebResource.axd" verb="GET" type="System.Web.Handlers.AssemblyResourceLoader" validate="True"/>
            <add path="*.axd" verb="*" type="System.Web.HttpNotFoundHandler" validate="True"/>
            <add path="*.aspx" verb="*" type="System.Web.UI.PageHandlerFactory" validate="True"/>
            <add path="*.ashx" verb="*" type="System.Web.UI.SimpleHandlerFactory" validate="True"/>
            <add path="*.asmx" verb="*" type="System.Web.Services.Protocols.WebServiceHandlerFactory, System.Web.Services, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" validate="False"/>
            <add path="*.rem" verb="*" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="False"/>
            <add path="*.soap" verb="*" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="False"/>
            <add path="*.asax" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.ascx" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.master" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.skin" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.browser" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.sitemap" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.dll.config" verb="GET,HEAD" type="System.Web.StaticFileHandler" validate="True"/>
            <add path="*.exe.config" verb="GET,HEAD" type="System.Web.StaticFileHandler" validate="True"/>
            <add path="*.config" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.cs" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.csproj" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.vb" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.vbproj" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.webinfo" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.licx" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.resx" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.resources" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.mdb" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.vjsproj" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.java" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.jsl" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.ldb" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.ad" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.dd" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.ldd" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.sd" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.cd" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.adprototype" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.lddprototype" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.sdm" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.sdmDocument" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.mdf" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.ldf" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.exclude" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*.refresh" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
            <add path="*" verb="GET,HEAD,POST" type="System.Web.DefaultHttpHandler" validate="True"/>
            <add path="*" verb="*" type="System.Web.HttpMethodNotAllowedHandler" validate="True"/>
        </httpHandlers>
You should be able to get a web page with "0001" printed on it when you access your servers website from another PC.
I used the default paths so this was my URL:
http://server.ucd.ie/Adobe/CS/webfeed/oobe/aam20/win/updaterfeed.xml

Remote Update Manager missing exception apps

Hi all,
Can anyone explain to me why remote update manager or even the Update GUI does not include any of the exception deployed apps like Lightroom or Acrobat? I get users asking us to update these for us when they open the app as the pop up appears.
We have automated all the standard apps' updates via remote update manager but the cannot include the other exception ones. Can anyone help me with this one? I want to automate all the updates.
If it isn't implemented yet then I'd like it to be since we lock admin rights from our users for security reasons.
Thanks,
Josh.

Hi all,
Can anyone explain to me why remote update manager or even the Update GUI does not include any of the exception deployed apps like Lightroom or Acrobat? I get users asking us to update these for us when they open the app as the pop up appears.
We have automated all the standard apps' updates via remote update manager but the cannot include the other exception ones. Can anyone help me with this one? I want to automate all the updates.
If it isn't implemented yet then I'd like it to be since we lock admin rights from our users for security reasons.
Thanks,
Josh.

Remote Update Manager doesn't recognize applicable updates

Hi,
We have a script scheduled to run Remote Update Manager on one of our client machines. This machine is currently running OSX 10.8.5 and Adobe Creative Cloud. When looking at Creative Cloud directly, we can clearly see that there are updates available for our Adobe products. Remote Update Manager, however, does not recognize these updates and will therefore not automatically update. This prevents the user from working as they do not have access to administrative credentials used to update these applications.
I have included an example of the returned messages by Remote Update Manager. These logs are pulled as of this morning but, as you can see, still reflect an outdated entry of 10/17/13.
| UpdaterCore library initialized successfully.
10/17/13 09:48:24:600 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
10/17/13 09:48:24:600 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Starting UpdaterCore CheckForUpdate...
10/17/13 09:48:25:186 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | CheckForUpdates completed successfully.
10/17/13 09:48:25:186 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
10/17/13 09:48:25:186 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Starting UpdaterCore DownloadUpdates...
10/17/13 09:48:25:188 | [WARN] | | AAMEE | Utilities | RemoteUpdateManager | | | No new applicable Updates. Seems like all products are up-to-date.
10/17/13 09:48:25:188 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
10/17/13 09:48:25:189 |
I was wondering if you had any advice on the next steps to resolve.
Thanks,
Evan

Some links that may help
-Team Installer http://forums.adobe.com/thread/1363686?tstart=0
-http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

Remote Update Manager - Acrobat Pro

Hello everyone,
Please review this snippit from the Remote Update Manager (RUM) documentation.
Note: Remote Update Manager is meant only for a subsection of Adobe Desktop products. It can not be used for browser plug-ins such as Flash Player and for Adobe Reader, Acrobat Professional, and Adobe AIR application updates.
I ask the question... WHY?
Why, at the very least isn't Acrobat Pro part of the Adobe Update Server Setup Tool (AUSST) and RUM configuration?
I've finally gotten my Adobe udate server working and created a Scheduled Task to run the incremental update everyday. Perfect.
Now I'm implementing the override files on my client machines and creating a Scheduled Tasks to run the RemoteUpdateManager so that my users (as well as myself) do not have to worry about updating the Adobe programs... BUT... one of the programs that we use quite a bit, Acrobat Pro, is not part of this automated update scenario.
So, I'm left still updating Acrobat manually which almost, but not quite, defeats the purpose of AUSST & RUM.
Can anyone from Adobe tell me whether there are plans to add Acrobat Pro to the automated updating procedure mentioned above?
Please say yes.
I'm so close to being at the point where the Adobe updates are completely automated. Adding Acrobat Pro to the list would be like hitting a grand slam in the 9th inning to win the game.
Thanks in advance.

Markus, thank you for the information.
First, If Acrobat is not a creative product then it shouldn't be offered in the CC collection of programs.
Second, Things being the way they are - Acrobat being deployable with the CC programs - it should be updated the same way as the CC programs. It would just make it nice and tidy and dare I say efficient.
I will check out the link to the tools. Great, more software to download, install and configure.

Remote Update Manager does not exit

I'm trying to use Remote Update Manager to update PCs in our domain, but RemoteUpdateManager.exe does not exit, it just hangs. The log looks like this
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | ##################################################
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | ##################################################
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | Launching the RemoteUpdateManager...
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | RemoteUpdateManager version is : 1.7.0.25 (BuildVersion: 1.6; BuildDate: Tue Sep 02 2014 07:02:05 )
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | **************************************************
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | Initializing UpdaterCore Library...
11/04/14 15:19:27:484 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | UpdaterCore library initialized successfully.
11/04/14 15:19:27:484 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | **************************************************
11/04/14 15:19:27:484 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | Starting UpdaterCore CheckForUpdate...
11/04/14 15:19:29:730 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | CheckForUpdates completed successfully.
11/04/14 15:19:29:730 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | **************************************************
11/04/14 15:19:29:730 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | Starting UpdaterCore DownloadUpdates...
11/04/14 15:19:29:730 | [WARN] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | No new applicable Updates. Seems like all products are up-to-date.
11/04/14 15:19:29:730 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | **************************************************
What I'm not getting is the "Ending the RemoteUpdateManager Return Code (0)" part.
I'm using the latest AAMEE.
Are there any further things I can do to see why this is happening?

It seems to be related to the new Creative Cloud Packager (version 1.7).
All the packs I had made with 1.5 exited correctectly.
All the packs I have make with 1.7 dont exit.
And it seems to be impossible to go back to 1.5 ....
I think the problem might be with this line (from uob_csis but I get the exact same):
RemoteUpdateManager version is : 1.7.0.25 (BuildVersion: 1.6; BuildDate: Tue Sep 02 2014 07:02:05 )
There seems to be an incoherence between the version and the buildversion.

Remote update manager creative cloud app

Hello,
remote update manager won't update the creative cloud app for windows. Is it intended, that we need a separate tool to update the CC-App? Are there any manuals describing how to automatically update it?
Since users in out company don't have admin privileges, i'd like to do it with a tool such as the remote update manager - but RUM will update all other adobe applications, just not the creative cloud app...
Thanks and regards,
Tobias

Hi Ashubijalwan1,
just to make sure there is no misunderstanding:
All Creative Suite Apps are updated except for the app with the name "Adobe Creative Cloud".
When I use the Creative Cloud Packager and select solely the core components, "Adobe Creative Cloud" is a part of them. The program itself shows a message saying that an update is necessary, but RUM won't update "Adobe Creative Cloud".
Best regards,
Tobias

Printer driver for an HP LaserJet 1000 series for use with Windows 7

The CD ROM HP LaserJet 1000 series printer driver is not recognized by my new Windows 7 PC. So the printer does not work. I've looked on the HP web site for compatible drives and get the hint that a Vista driver would work. Can someone please confirm if this possible and how this is accomplished? Thanks.

Where did you find a hint that Vista drivers would work? This page says:
Your LaserJet model is not supported in Windows 7.
For more information regarding upgrade programs and new product information, please visit the HP Trade-In/Trade Up website at www.hp.com/united-states/tradein/home_flash.html or directly from HP at www.hp.com .
Additionally, this page says the Laserjet 1000 is not supported in Vista.
If you are using the 32 bit version of Windows 7 it may be possible to download the XP drivers here and install them.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I need hp laserjet 1000 series driver for win 8 64 bit

i need hp laserjet 1000 series driver for win 8 64 bit
[Personal Information Removed]

Hi,
The printer is not supported on Windows 8 or Windows 8.1, a drevice is not available for the OS:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03450061
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

IOTECH DAQ PCI5501 1000 Series - ADC

I'm a student and new to Labview and DAQ cards, so this should be easy for most of you reading this...
I have an IOTECH 1000 series DAQ card. I am able to input a sine wave into one channel and get results of the A/D conversion; however, I cannot get more than one channel to work...
I have configured the channels I want and am getting data, but it isn't valid data. I have also configured for single-ended and am getting errors (invalid configuration error #5601).
Specifically, when I am configured for one input 0(1) and differential, I get what seems to be valid data (sine wave from signal generator on CH0 and SGND). When I configure for two channels 0(1),1(1) I get crap...moreoever, the second column of the array is nothing but ones and zeros, which led me to believe the DAQ is set for differential by default. So, I configured it for single-ended and I get the same data, but I also get an error for the single-ended configuration (invalid configuration error# 5601). Also, when I tie the same input to CH0 and CH1, I get ones and zeros in both columns of the array.
The documentation for IOTECH seems to be ok for initial setup, but they don't give any examples. They say that it's compatible with Labview and provide a pdf file for using the DAQ with Labview, but it's nothing more than basic setup/config info for the VI's. I've searched and searched and can't find a clear answer or any information that seems to help. I also ran across a comment about a HI and LO side for the analog inputs...but they say it has 16 single-ended inputs...and I have 16 analog inputs on my card...nothing about a HI and LO. Anyway...
I hope this was clear. If not, feel free to ask for clarification and additional information. I'm sure anyone who has used this DAQ card and Labview can answer this question. Any help/advice is greatly appreciated.
D.Norwood

Howdy norwood,
Unfortunately, I'm unfamiliar with IOTech DAQ devices, so I can't offer any personal experience to guide you in that regard. However, you might want to contact IOtech through their technical support page here for additional help with their LabVIEW driver package and hardware configuration. They would be best suited to answer your questions.
Sorry again that I could not be of more help!
Warm regards,
pBerg

Remote update of a 1000 series LWAP

Similar Messages

Maybe you are looking for