Remote volume control only goes all the way up/down

when i use my apple remote when im using itunes, or anything other than frontrow, the volume lowers but does not stop until it has reached the bottom or the top. therefore, to adjust my computers volume i must use the keyboard volume control.

Have you tried a reset first and if a reset does not resolve it, a restore with iTunes?
I don't know if you are the only one who has experienced this, but I don't recall seeing the same reported here and if it has, it has not been reported in large numbers or I probably would have seen it.

Similar Messages

The sound doesn't work. It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume. When we try to play songs, it acts like it's going to play and then goes back to the play list. Restored and still no

It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume. When we try to play songs, it acts like it's going to play and then goes back to the play list. Restored the device and still no sound.

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Can I upgrade only to 2.0... or 2.1 without going all the way to 2.2?

My Touch (my new one after the upgrade to 2.0 killed my first one) is not upgraded. Can I just upgrade to 2.1 without going all the way to 2.2 Do you think that would be safer anyway? And if so, how do you do that?

well, seemed like it did.. and Apple replaced it free and refunded me for the upgrade so it seems like they think it did too...but that's not my question....

My volume automatically turns itself all the way down whenever I start my ipod (even when I'm not playing music)

My volume automatically turns itself all the way down whenever I start my ipod (even when I'm not playing music). As soon as I slide my ipod into opening the volume goes all the way down. Even if it's already completely off, the audio icon comes on the screen, which tells me the ipod is still trying to lower the volume. As I said, I don't even have to be listening to music. I can be on the opening screen. When I turn the volume back up, it immediatley turns it back down. It only doesn't go down if I physically hold my finger to volume bar on the touch screen.
And yes, I've updated all my software (on my ipod and laptop). I've also entirely reset my ipod twice.
Tell me, is it time to ditch the ipod and find some other sort of mp3 player (this is one problem at the end of a long list of less debilitating but equally annoying issues I've had with my 2 ipod touches)

Yeah, I probably mean restore. Multiple times though!
Also, I forgot to mention that this issue persists regardless of whether or not my headphones are plugged in.

Ipad Volume keeps turning itself all the way down

ipad Volume keeps turning itself all the way down rendomly i`ve tryed everything from upgrading to V5 to rest the device what should i do

Is the switch above the volume set for mute? Accidentally bumping that would turn down the volume.
Try Settings > General > Lock Rotation to On and see if that eliminates the problem (although beware that the switch will now control screen rotation. If sound starts working corrcetly, but your screen lock keeps setting, then I think you are having a switch problem.

HT1369 my 3gs is stuck in restore mode and when i hook it to my computer to update it goes all the way thru till its to the part where its waiting for iphone and that's it it stays there no matter how long i leave it hooked up.. does anyone know how to fi

my 3gs is stuck in restore mode and when i hook it to my computer to update it goes all the way thru till its to the part where its waiting for iphone and that's it it stays there no matter how long i leave it hooked up.. does anyone know how to fix it??

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

IMac using OS 10.8.4 volume goes all the way down on restart

If my volume is halfway up and I restart my computer it automaticcally changes to all the way down. I want it to remain where I last set it on restart.

it didn't chime twice as the instructions said it would.
When you restarted, was the system clock still showing the correct time? If it was, you probably didn't reset the NVRAM.

When not touching any sound buttons, it goes all the way up to full on its own? please help!?

My iPhone is reasonably new. When just holding the phone (Not touching any buttons) It will turn the volume up all the way on its own and the "ringer" picture will not go away until I hold down the ( - ) button. about 5 seconds later it will re-appear and the ringer will be turned up all the way again. Someone please help! I'm going crazy!

- Try directly downloading/installing it on the iPod. As long as yu are signed into the same iTunes account that originally purchased it you will not be charged again.
- Reset the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Dimension hierarchy not going all the way down.

Hey everyone,
This is problem I've never seen before. I have a dimension hierarchy which won't let me drill all the way down to the bottom detail level.
I've got a FACT table called FACILITY_PERSON_F which relates dimensions FACILITY_D and PERSON_D. Each person has a another dimenion, ADDRESS_PERSON_D and facility has ADDRESS_FACILITY_D
The overall model looks like this
ADDRESS_PERSON_D -----> PERSON_D ----> FACILITY_PERSON_F <----- FACILITY_D <------ ADDRESS_FACILITY_D
The joins are defined as FKs in the physical and complex in the BMM layer.
In the BMM layer, to create the respective dimensions, I right clicked on PERSON_D and FACILITY_D and selected the "Create Dimensions" option.
For both newly created dimensions, I create additional levels in the hierarchy so that country drills to state which drills to city which then drills to the detail (PERSON_D or FACILITY_D respectively).
I restart my services, then I log in as admin to test out the drill.
When I go to facility, it works completely correct. I can go from Country all the way down to facility.
However, for the person data, I can only get down to the city information, which is one step above the person detail data. At this point to field is no longer clickable/drillable.
Both drills are setup identically, however, only one is working. When I do a consistency check, everything is fine.
Does anyone have an idea of what's going on here? Any recommendations? Is there a reason why a drill would not be available? Is there something I can do to test/troubleshoot?
-Joe
Edited by: Joe Bertram on Nov 12, 2008 10:47 AM
Edited by: Joe Bertram on Nov 12, 2008 10:49 AM

you must check that the lowest logical level from your dimension must have no more detailed data at your dimension table
i hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

HT204370 the volume is very low on downloaded movies from itunes, and my volume is turned up all the way, and my volume is fine all other times???

My volume is very low when I download a movie from itunes, and my sound is turn all the way up. The volume works fine on everything else. It's really hard to even watch the movie and enjoy it. Why is this happening?

Morning Al My issue has since been resolved after some advice from a friend. It was simple, push the optical cables in firmly until they click, however mine didnt click but there was definatley room for them to be pushed in further as if they are loose they "leak". in addition to this on the TV settings, make sure that the TV speakers are turned off

I can't get my ipod touch to slide all the way down on a docking station. The ends the stick up on the docking station seem to prevent it from going all the way down. What do I do?

I can't connect my ipod touch to a docking station. The ends stick up on the docking station connection piece. I believe that is what is preventing my ipod from sliding down all the way. What am I doing wrong?

Similar issues here.
I purchased five movies for download and having nothing but problems getting them downloaded. I keep receiving error messages and the download stops and I have to restart it, just to get another minute worth of download with each restart. Now Apple has my money and I have nothing.

I download the new flash player and it goes all the way through and says finish but it does nothing

I go to Adode's website and download the new flash player because I can't watch clips all the sudden and I go all the way through the download and click finish. But when I go to say youtube it says I need a newer flash player. It's a never ending thing, no matter what I do it's the same over and over. Please help

It seems to be a browser specific issue. Try a different browser like chrome or firefox, it should work.
For fixing IE or Safari, lets follow below suggestions :
Run the Flash Player Uninstaller as applicable for your machine(i.e.Windows or MAC) and remove flash player.
For MAC : http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
For Windows : http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
Restart the machine.
Download and Re-install Flash Player.
Restart the browser and check.
You might also wanna check the below articles ::
Enabling Flash Player in Internet Explorer 9 : http://forums.adobe.com/thread/885448
ActiveX Filtering in Internet Explorer 9 : http://forums.adobe.com/thread/867968
[Moving the discussion to Flash Player forum]

My iPad keeps showing the volume level and I can't make it go away or stay at a certain level of I turning down it goes all the way back up by itself and the thing that shows me the volume level only goes away if I restart my iPad what's wrong with it?

Hi

Do you have a case on it that is pushing the volume down button on the side, or is the button stuck?

L7780 scan bar goes all the way across, but the light is only on for the first 1/2 inch

If one does a scan/copy with the thing open, one can see a bar run from one side to the other, lit in one direction. On my L7780, that light is no longer lit for the entire trip across, resulting in a mostly black scan/copy. What do I do? Repair? Replace?
Officejet Pro L7700
OSX 10.9.4
MacBook Pro, mid-2010
Thanks in advance for your guidance!

Hi,
This seems to be an hardware issue.
You may follow the steps to try resolve the issue.
1) Connect the printer directly to the wall jack (Bypass any surge protectors)
2) Disconnect the power chord from the back of the printer and reconnect it after 30 seconds while you are holding down the power button.
If none of the above steps resove your issue call HP customer support at 1-800-474-6836.
Although I am an HP employee, I am speaking for myself and not for HP.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.

Firefox issue, backspace icon goes all the way back to the home page

Hello,
This behavior is consistent.
IE 8 browser - back icon goes back 1 screen
Firefox 3.0.3 - back icon goes back X number of pages to the home page. The only way I have found to go back 1 page is to click on the directory path:
ex.
Expert Forums » Community Discussions » Suggestions and Comments
To go back one level I would have to click on
Suggestions and Comments.
Thanks
Bruce

Hi Bruce;
I'm using the same FF version...But haven't got the related problem...
Greetings,
Blag.

Remote volume control only goes all the way up/down

Similar Messages

Maybe you are looking for