Remote vs Local mode - amount of data transfer

I have C# application which has all data in SQL database in Azure cloud. Now I am developing SSRS reports and they will be shown using report viewer component. Source data for these reports is in the same database in Azure. I would like to minimize amount
of data transfer between application and cloud. Are there any differences in amount of transferred data if I use remote processing mode or local processing mode in report viewer and what are main factors that affect it?

Hi Matevzg,
As per my understanding, the amount of data transfer between application and Azure cloud are the same. When we view report in remote processing mode, the report server processes the data and renders the report into an output format. The ReportViewer control
then displays the rendered output on the screen. When you configure the ReportViewer control for local processing, all report processing is performed on the computer that hosts the application. But the amount of data transfer between application and Azure
cloud is depended on the report data. So if we using the two processing mode to display the same report, the amount of transfer data should be same.
Besides, the following documents may help you make better choices:
When to use Local processing mode
When to use Remote processing mode
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Handling Huge Amount of data in Browser

Some information regarding large data handling in Web Browser. Browser data will be downloaded to the
cache of local machine. So when the browser needs data to be downloaded in terms of MBs and GBs, how can we
handle that ?
requirement is as mentioned below.
A performance monitoring application is collecting performance data of a system every 30 seconds.
The size of the data collected can be around 10 KB for each interval and it is logged to a database. If this application
runs for one day, the statistical data size will be around 30 MB (28.8 MB) . If it runs for one week, the data size will be
210 MB. There is no limitation on the number of days from the software perspective.
User needs to see this statistical data in the browser. We are not sure if this huge amount of data transfer to the
browser in one instance is feasible. The user should be able to get the overall picture of the logged data for a
particular period and if needed, should be able to drill down step by step to lesser ranges.
For e.g, if the user queries for data between the dates 10'th Nov to 20'th Nov, the user expects to get an overall idea of
the 11 days data. Note that it is not possible to show each 30 second data when showing 11 days data. So some logic
has to be applied to present the 11 days data in a reasonably acceptable form. Then the user can go and select a
particular date in the graph and the data for that day alone should be shown with a better granularity than the overall
graph.
Note: The applet may not be a signed applet.

How do you download gigabytes of data to a browser? The answer is simple. You don't. A data analysis package like the one you describe should run on the server and send the requested summary views to the browser.

How to increase AFP data transfer speed?

When I connect to our server from a WAN source outside of our facility the file data transfer rate is extremely slow. We just upgraded to a 10Mps fiber service and that has dematically increased our website data tranfer speed. I would like to find a way to access the file server from remote location and work, but the data transfer rate makes productivity impossible. I would appreciate hearing how other organizations are set-up and functioning with file transfer sizes at an average of 10 to 15 Mb.
Thanks,
Brian
OS10.6.8 Server,

If you don't have enough network bandwidth for your time requirements, you have little chance of success with the direct approach. Techniques such as file compression and such can only provide limited help. If you're transfering multiple copies of the files, then you can push one copy of the file to a hosted provider, and then serve additional copies from there.
As for your network, a ten million bits per second network connection is the speed of first-generation Ethernet. That Ethernet was a fast network, back in 1985. In the era of a one billion bits per second Gigabit Ethernet and increasingly commonly with the ten gigabit Ethernet links, a 10 Mb link is glacial.
A typical DSL network is asymmetric, meaning you'll have 10 Mb down (theoretically) and some fraction of that up. So you might not be getting that 10 Mb in the direction you're coppying files. And this is best case; various of the ISP network links around aren't providing their rated speeds.
AFP stinks on a network, and you're also opening up your file system to remote attackers.
As for WebDAV, read this. In addition to WebDAV, you can also try an sftp or other "simpler" copy command as a test, and see what you get for that. (sftp is also encrypted, which has benefits, though the encryption also requires more processing time.)
But beyond techniques such as data compression (and which may or may not be an option here) or incremental or "delta" changes to the data (which probably isn't an option here) or working locally and batching over the changes, there are few good ways to contend with a too-slow-for-your-needs link.

What is the correct command sequence code in Labview that will take an instrument out of Remote and put it in Local mode?

I am writing a routine in Labview 5.1 that will capture the screen data on a Network Analyzer after configuring the display. The routine to capture the data is working fine but when I try to send the equipment into local to allow me to manually make another change to the data I want to capture, the analyzer will go into a listen mode. The command I am sending to the analyzer using the 488 misc function is "loc". I've notice that is seems to put the anayzer into listen mode which will not respond to the commands to capture the screen data again.

Check the manual for the instrument. Some instruments do not have a specific command to go into local (or remote) mode. Tektronix oscilloscopes use the GTL command to Go To Local. HP and Agilent instruments do not have a command for this.
It's been a while since I used LV5.1, but in LV6, there is a VI under Instrument I/O->488->488.2 that allows you to set instruments into local mode. Hopefully, the same VIs exist in LV5.1.
Rob

N95 8Gb USB Data Transfer Mode not working

I have a bizarre problem with USB Data transfer.
a) I upgraded to the new 15.x firmware with the correct HKCSL package - 0557980
b) I connected PC #1 in data transfer mode with no issue and copied a bunch of installers onto the mass memory and went on to install them - to the PHONE memory.
c) Later in the day, connected PC #2 and did the same with the last few applications.
d) Next day tried to connect PC #1 and it didn't work
e) Thought I must have an application using the MASS storage but checked and not so - all apps on Phone memory.
f) Went to PC #2 and tried - Data transfer mode works - no problem.
g) Tried PC #1 again, and still not working. I get all the right messages (Mass storage cannot be used at this time etc) on the handset, and I get the "safely remove hardware" option appearing on the PC - but I don't get a drive letter assigned in the Windows Explorer.
h) I have tried it on PC #3 and this works as well - no problem.
1. The working PC's both have PC Suite 2-Beta installed, while the problem PC has no PC suite at all.
2. I have downloaded the Nokia-connectivity_cable_driver_rel_6_85_10_0 and it installs properly - giving all the expected wireless... options in Device Manager, but I still don't get a drive letter assigned with the basic data transfer mode on this problem PC #1
So the issue seems to be with a PC that has never seen any version of PC suite, but it worked straight after the firmware upgrade.
All PC's are XP SP2.
Any suggestions on anything else to try ?
Regards

SOLVED by:
- attaching N95, selecting USB Data Transfer Mode
- Going to Device Manager
- Selecting the USB Mass Storage Device for N95
- "Uninstall"
- Remove cable when N95 says its safe to
- Re-attach cable
The PC then re-discovered and reloaded the drivers including the mass storage which then worked normally.
No idea what messed it up in the first place though.

Not able to connect N82 to pc in data transfer mod...

I am not able to connect N82 in data transfer mode( other modes are working fine) though i installed latest connectivity cable driver for N82. It says that it could not find any suitable driver(after search cd provided and online).
My current firmware version of N82(RM-313) is 10.0.046. Operating system is Windows Vista. Will the firmware update fix the problem or I have to contact customer care center?
Thank you for your support.
mlhpr
Solved!
Go to Solution.

22-Mar-2008 02:51 PM
scoobyman wrote:
Hi mlhpr
If phone is set to 'data transfer" mode on user interface and USB plugged into PC N82 behaves as a Windows USB mass storage device and you are saying that Windows Vista can't recognize this?
Ya thats is what the problem is. As you said the phone was to behave like USB pendrive in data transfer mode but i am getting this error.
:I first connected the N82 with cable Nokia CA-101 provided with handset and selected the data transfer mode. Then the windows(Vista) icon would appear in task bar showing windows is installing the driver. Then a window pops up saying driver not found and requests permission to search online for driver. When I choose search online for suitable driver, it searches for a while and says no driver found. (net is working prefectly fine). The icon disappears from the bar and phone is inaccessible from windows explorer. But USB indicator on mobile screen is active until i disconnect using mobile connectivity settings.
Actually i wanted this mode for installing the Nokia Maps which requires the phone to be in data transfer mode.
mlhpr

N95-8GB - Not able to connect in Data Transfer Mod...

Hi all,
Recently I bought N95-8GB and installed PC Suite which comes along with the phone in my OS Windows Vista Home Premium. When I try to connect my phone in Data Transfer mode, I am getting message "Found new hardware - Windows needs to install driver software for your unknown device" and I am not able to find any driver for the same.
Please help me out to solve this problem.
Regards,
S.Suresh

just let the wizard run through and select the options that windows will search for the friver itself. the dirvers are included in nokia Pc suite package.
YOu can also try to use the standard NOkia PC Suite from www.nokia.com/pcsuite or generally look for a fresh version of NSeries PC Suite from thephone web-pages, the CD-ROM versions are normally outdated

N95 8GB reboots periodically in data transfer mode

I have a new N95 8GB running firmware v20. Unfortunately, when I use the genuine USB cable and select "Data Transfer Mode" the phone reboots 60 seconds after I connect the cable (and thereafter each 60 seconds when I don't touch the phone).
I have tried with a non-genuine cable and the behaviour is the same.
Coincidentally the "Power Save Time-out" is set to 60 seconds. When I change this to another value, say 40 seconds, then the above rebooting happens every 40 seconds.
This appears to be a phone bug and makes it extremely difficult to use data transfer mode, unless you can transfer files within the power save time-out period, or unless you are prepared to press a button on the phone within this period.
**Nokia please fix this**
See related post: /discussions/board/message?board.id=smartphones&thread.id=81967&view=by_date_ascending&page=1

Well,rotateme works perfectly for me and i have a n95 8gb too.So there are two things that might happening.
1.You are doing something wrong with the whole installation(does rotateme works when you install it?)
2.You downloaded your self a corrapted or somekind of a virus or a bug .sis file and installed it to your phone.
Why dont you try to download one other rotateme file for you?You can find plenty rotateme from a lot of users.I can send you mine,if you want send me an e-mail and i`ll send to you the .sis file that i used and as i said,it works fine for me.
Peace
Message Edited by noslien on 06-Feb-2008 07:47 AM
Eykleidis

Problem in data transfer mode

when i change sms stores in mass memory instead of phone memory,the phone cant go in transfer mod.
i have lots of sms and it cinsumes lots of phone memory.
i need to transfer them into mass memory.
any suggestion?
n95-2

every night i connect my phone to pc and use this amazing
apllication ,LifeBlog, and automaticly it transfers the sms and pics and videos i receive or capture.
but i wanna know that, isnt any solution that u save your sms in mass memory AND use data transfer mod.
thanks for ur reply.

HT5287 If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?

If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
Or am I missing the bigger picture?

As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.

I have huge amount of data on a windows external drive and want to transfer to a Mac drive. Does anyone know an easy way to do this? I have almost 2TB of data to transfer. Thanks.

I have huge amount of data 2TB on a windows Fantom external drive and want to transfer to a Mac drive. Does anyone know an easy way to do this? Thanks. I have an IMac 3.5 GHz Intel Core i7. I haven't bought a Mac external yet.

Move your data to a new Mac - Apple Support

Is the only way to import large amount of data and database objects into a primary database is to shutdown the standby, turn off archive log mode, do the import, then rebuild the standby?

I have a primary database that need to import large amount of data and database objects. 1.) Do I shutdown the standby? 2.) Turn off archive log mode? 3.) Perform the import? 4.) Rebuild the standby? or is there a better way or best practice?

Instead of rebuilding the (whole) standby, you take an incremental (from SCN) backup from the Primary and restore it on the Standby. That way, if, for example
a. Only two out of 12 tablespaces are affected by the import, the incremental backup would effectively be only the blocks changed in those two tablespaces (and some other changes in system and undo) {provided that there are no other changes in the other ten tablespaces}
b. if the size of the import is only 15% of the database, the incremental backup to restore to the standby is small
Hemant K Chitale

Unable to connect via "Data Transfer" Mode On N95 ...

Its been happening for a little while now. When i plug the USB cable in, it asks if i wanna connect via PC Suite, Data Transfer etc
When i click Data Transfer it says the following:
"Unable to activate Data Transfer Mode. Mass Memory is in use by another application"
Does anyone know the fix for this problem?
Many thanks
Message Edited by tiff777 on 06-Nov-2008 07:56 PM
Message Edited by tiff777 on 06-Nov-2008 07:57 PM

Hi There
Im not sure this would work for you all but i came accross this discussion after suffering the same problem and after pulling my hair out i finally solved it and thought it was only fair i posted how.
I had tried all options on here apart from deleteing everything off my memory card ( i wasn't keen on this option ) i checked the running apps and it just showed that standby was running,
So i thought i would try uninstalling recently installed item one by one, i had recently installed some software called CALL RECORDER and although it was not showing up that it was running it was in the background after deleting this the problem was solved ,
So try and think if there are any apps that you have installed that may be running in the background but not showing up , i would advise deleting these one by one as i did and if it still doesnt work you can reinstall it ,
hope this helps
BUT EVEN AFTER ALL THIS I STILL LOVE MY N95 8GB !!!!!!!!!!!!!!!!!!!!!!!

E90 on data transfer mode.

hi
i am trying to connect my E90 to the PC via data transfer mode but i get the message saying "Unable to activate data transfer mode. memory is being used by another application" when i check, i have no applications running. Kindly help..!!!
Solved!
Go to Solution.

If you have installed 3rd party themes to your memory card, and then choose to use one of these, this will possibly trigger the error message that you are seeing...
Steve at AAS recommends installing themes to the phone memory and not to the memory card...

How can we transfer huge amount of data from database server to xml format

hi guru
how can we transfer huge amount of data from database server to xml format.
regards
subhasis.

Create ABAP coding
At first we create the internal table TYPES and DATA definition, we want to fill with the XML data. I have declared the table "it_airplus" like the structure from XML file definition for a better overview, because it is a long XML Definition (see the XSD file in the sample ZIP container by airplus.com)
*the declaration
TYPES: BEGIN OF t_sum_vat_sum,
          a_rate(5),
          net_value(15),
          vat_value(15),
         END OF t_sum_vat_sum.
TYPES: BEGIN OF t_sum_total_sale,
        a_currency(3),
        net_total(15),
        vat_total(15),
        vat_sum TYPE REF TO t_sum_vat_sum,
       END OF t_sum_total_sale.
TYPES: BEGIN OF t_sum_total_bill,
        net_total(15),
        vat_total(15),
        vat_sum TYPE t_sum_vat_sum,
        add_ins_val(15),
        total_bill_amount(15),
       END OF t_sum_total_bill.TYPES: BEGIN OF t_ap_summary,
        a_num_inv_det(5),
        total_sale_values TYPE t_sum_total_sale,
        total_bill_values TYPE t_sum_total_bill,
       END OF t_ap_summary.TYPES: BEGIN OF t_ap,
        head    TYPE t_ap_head,
        details TYPE t_ap_details,
        summary TYPE t_ap_summary,
       END OF t_ap.DATA: it_airplus TYPE STANDARD TABLE OF t_ap
*call the transformation
CALL TRANSFORMATION ZFI_AIRPLUS
     SOURCE xml l_xml_x1
     RESULT xml_output = it_airplus
     .see the complete report: Read data from XML file via XSLT program
Create XSLT program
There are two options to create a XSLT program:
Tcode: SE80 -> create/choose packet -> right click on it | Create -> Others -> XSL Transformation
Tcode: XSLT_TOOL
For a quick overview you can watch at the SXSLTDEMO* programs.
In this example we already use the three XSLT options explained later.
As you can see we define a XSL and ASX (ABAP) tags to handle the ABAP and XML variables/tags. After "

Remote vs Local mode - amount of data transfer

Similar Messages

Maybe you are looking for