RemoteApp 2012 problem on windows XP.

Hello
I have a problem with RemoteApp web access on Windows Server 2012 when i connect with Windows XP clients. The internet explorer shows the credential promt always and i can not access to the server. I have not this problem when i connect with windows 7 clients
with Remote Desktop client 8.1. Remote Desktop client 8.1 is not available on windows XP but i have installed 7.0 RDC but the problem continues.
What i have to do to correct this problem?
Thanks and sorry my english.

When you say "The internet explorer shows the credential prompt always and i can not access to the server" do you mean it simply keeps re-prompting you to login and doesn't get any further, or are you getting any error messages?
Since you've already installed RDC 7.0, the other two things to check are that the XP machine is running SP3, and that you've enabled CredSSP on there (as it's not enabled by default on XP). To check this, click Start > All Programs > Accessories >
Remote Desktop Connection, then click the little computer icon in the title bar, left of the words "remote desktop connection", then choose "about", or "help > about". If it says "Network Level Authentication not supported"
or has no reference to this at all, you need to enable it. If it's not enabled then have a look at
http://support.microsoft.com/kb/951608 which has instructions for enabling it.
Depending on the options enabled on the 2012 server, it's possible however that you simply can't connect from an XP machine at all. Some of the newer features on 2012 RDP don't support XP as they rely on functionality that is missing from XP. Annoyingly
I can't find a reference to what those features at right now, but I know with our setup (with those features disabled currently) we're able to support XP clients, but have are intending to end support for it so we can enable those features and improve functionality
for the newer clients.

Similar Messages

Problem on Windows 7 Home Premium cant open program for using codes like visual studio 2012

I have problem my windows 7 Home Premium because of visual studio 2012..I can't open even in several times, I don't know what happen, and sometime it is so low to process whenksn it to open my laptop..Why is that pleas do reply..ASAP! tha

Hi,
According to your description, it seems like VS itself problem, you can try to repair this program through Control Panel for test. If no use, it would be better to post your question at VS forum for further assistance.
Contact VS forum:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio%2Cvsarch%2Cvsdbg%2Cvstest%2Cvstfs%2Cvsdata%2Cvsappdev%2Cvisualbasic%2Cvisualcsharp%2Cvisualc
Roger Lu
TechNet Community Support

Problem with windows server 2012

i have a problem with window server 2012 , i remove some feature in server manager and it restart .but when i log in into my account it shows a black screen with cmd window with this massage "C:\users\Administrator>." please
help me. i dont know whats happend and i cannt work with this
thanks a lot

You may follow this link to get it solved
http://www.jon-tupitza.com/2014/02/18/enabling-the-windows-server-2012-r2-gui/
http://www.arabitpro.com

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using.

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using. I use a cheap Logitech Stereo Headset H130, but since there is only on audio plugin on the computer, I purchased a 3.5 mm 4-pin smartphone audio adapter thingy. That allowed me to put both my the sound coming to my headset & the microphone on my headset onto one wire. Everything worked wonderfully when running the Mac OS since they probably have support for that kind of stuff. The problem is though that once I try to use the same method in Windows 7, the OS doesn't recognize my headset microphone at all, but, instead when recording my voice decides to use the built-in mac microphone. Using this adapter still allows me to hear from my headset, but not use the microphone and that becomes a problem. It might be so that Windows 7 doesn't have support\drivers for that... How should I continue from here on out? Any advice?

From what I have read from others on here you may be out of luck. You would need the appropriate Windows drivers for the Cirrus chip in the Mac and no one has been able to successfully locate them. Apple wouldn't support this since Windows is an optional install.
Sorry to bring the bad news.

Problems deploying Windows 7 x64 computers with more than 8GB RAM

SCCM 2012 R2 CU1
Windows 7 x64
We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
- we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
The error shows in 3 different ways – depending of the computer model.
1) BSOD – STOP 0x000000F4. Disk error.
2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently fail every time after the error has begun. If we reduce (remove physically)
the memory to max. 8GB of RAM, they successfully run the Task Sequence. We get the above errors on both Lenovo and HP machines with more than 8GB.
I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
error on both m93p and M83. At least not the BSOD on the M93p ;-)
Tried setting SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
the same problem.
Investigating the smsts.log on a computer with the 0x87D00269 error.
Policy Evaluation failed, hr=0x87d00269 InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
you have not previously used.
Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords. And again why only on computers with more than 8GB RAM.
Anyone else had problems rolling computers with more than 8GB og RAM?
Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
Why does it only affect machines with more than 8GB RAM?
How to get rid of the 0x87D00269 error?
Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
Any help or hints would be appreciated!
Thanks
Anders

We have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
Machines with >4GB of RAM
Lenovo ThinkPad T540p failed applying drivers with 80040005
Black screen/white cursor issues intermittently
No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
Daniel Ratliff | http://www.PotentEngineer.com

AMD GPU. Driver update problem. Windows 7, BootCamp 5

Hey .
First I describe my problems, then what I've tried and at the bottom are my computer specs.
I have an old driver for my video card , I am reminded of this when I start modern games such as Battlefield 4
When I start Battlefield 4 a window opens that says which model of the driver I have installed and that I should switch to a newer, and the latest driver model number is then specified .
I have tried to update by :
1. Windows update . No such updates are there
2. Go into the Control Panel , gone into the display settings ( through the " change screen resolution " ) , advanced tab, the video card , properties, driver tab, and finally update the driver. With the election "search automatically". Then I get the message. " You already have the latest drivers installed ."
3. Download the latest drivers from the manufacturer's website ( amd ) and then implement step 2 ( above), but choose option : choose driver software on your computer. Then select the folder where I downloaded the files from the manufacturer's website . Then I get the same message from option 2.
4. Download the latest drivers from the manufacturer's website and then run the file I downloaded . The same message comes from the game (battlefield 4) that I do not have the latest drivers installed . Although the final page in the driver-installation said: your drivers are updated. Restarting the computer does not help me off with the problem.
Uninstall the existing driver is a possible solution . However, not reliable to me. Am worried that no drivers can be installed and that I will be stuck without any driver because i Did it once and could not install the new drivers and was then forced to reinstall BootCamp because they provide drivers for eg graphics cards, mice, keyboards and so on. However, these are updated from apple's side once every 3 years, and usually in conjunction with driver issues or updates. Not like these " imperfections " that I have.
Any other options than to uninstall the drivers and hope it goes to install new from the drivers website?
My technical data:
Computer: iMac (purchased newest model in June 2012 )
Operating System: Windows 7 64bit , through BootCamp 5 from Mac os Mountain Lion.
Graphics card: Amd Radeon 6700m 512mb
Current driver: 13.9

I had the exact same problem and i just got this to work. Go to my computer and then right click on the disc image. Then double click on bootcamp and then setup and that should work.

Forms problem in Window 7 64 bit

Dear Members
I have installed "Forms [32 Bit] Version 10.1.2.0.2" on Windows 7 64bit. I have the Internet Explorer 9. Now when i run the forms it prompts for download jinit when i try to download it show the error dialog box as under
Jinit.exe
Cannot download this file.
Details:
HTTP/1.1 502 Proxy Error (Forefront TMG denied the specified Uniform
Resource Locator (URL). )
Now i have installed manually JInitiator 1.3.1.26 (32-bit) and also copy the jvm.dll file in the desire folder. When i run the form it shows blank page with broken link.
Please help me to solve this problem.
Thanks & Regards
Edited by: SweetKUR on Aug 9, 2012 12:06 AM
Edited by: SweetKUR on Aug 9, 2012 12:19 AM

This is a common question in the Forum. A simple search of the forum and you would have found that Oracle Developers Suite 10g R2 (version 10.1.2.0.2) is not supported on Windows 7 64-bit. However, you would have also found a couple of threads where people have made this work.
Now i have installed manually JInitiator 1.3.1.26 (32-bit) and also copy the jvm.dll file in the desire folder. Don't do this! This is a complete HACK of the OS and there is no guaruntee that this will work and more importantly this could screw-up your OS.
By default, Forms 10g is configured to use the Oracle Jinitiator because this was the Java Runtime Oracle was using at the time. Now, however, Oracle has changed directions and has adopted the standard Java Runtime. Therefore, you must reconfigure Forms 10g to use the Java Runtime Plug-In (JPI) on Windows 7. With Windows XP you did not need to do this. Take a look at Forms: How to Configure Forms Builder to run forms locally for detailed steps on reconfiguring Forms 10g.
@937097
I had the same problem in my computer, and the guys from systems department solved the problem installing Windows XP SP3.thy triend to install Forms10 with Windows 7 64bits, but they said it can't be done. >
I disagree with your "Systems Department". I have Forms 10g installed and running quite well on Windows 7 Professional 64-bit. There are a few pre-installation steps you must take to install Forms 10g, but it can be done. At the very least, your Systems Department staff could have installed Windows XP Mode for Windows 7. Take a look at:
Windows XP Mode - Windows 7 Features
Install and use Windows XP Mode in Windows 7
Download Windows XP Mode
I've tested Forms 10g with XP Mode and it works fine there as well, but I prefer not to deal with the overhead of the Virtual Machine.
To properly install Forms 10g R2 on Windows 7 you must first have Windows 7 Professional or higher. Then follow these steps:
1. Install Java Runtime 1.6.0_33 (32-bit).
2. Change Windows Virtual Memory from System Managed to a specific amount (2048mb Initial size, 4096mb Max). The Oracle installer can't detect VM settings if they are system managed. You will need to restart your computer after making this change. Once you have completed the installation, you can change the settings back to system managed.
3. Right-Click the setup.exe and select properties. Select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP (Service Pack 3)".
4. Run the installer.
Once complete, review the document I linked above for configuring Forms to run locally from the Forms Builder.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

SQL Server 2012 Express on Window 8.1 64 bit version?

Hi,
I´m trying to install SQL Server 2012 Express on Windows 8.1 64 bit version. When I reach the point of "Installing Setup Files", of the installation process, the installation seems to halt. I´ve tried both the 32 bit and 64 bit versions of SQL 2012
Express. I´ve installed SQL 2012 Express several times before on other Windows versions but I´ve never encountered this problem. Is it a known SQL Server 2012 Express/Windows 8.1 64 bit compability problem?
Thanks in advance!
Martin

SQL Server 2012 express can be installed in windows 8.1 all you need to take care is that you meet
hardware and software requirements . Please read the article in hyperlink carefully.Make sure you have internet connection because it is required. Make sure you meet all .net
framework requirements
Below link would be helpful as well.
How to use SQL server on Windows 8 environment
Please remove any previous failed installation of SQL server from add remove program. If you still face issue please refer to Solution section of
this link for manual un installation.
Finally you can locate log files present at location
C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\summry.txt for details about log
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Graphic problem in Windows with Boot Camp?

I only just noticed this today when I was editing some pictures in Photoshop using Windows (Boot Camp). My version is Windows 8 64-bit and the Photoshop is CS 6 but I suspect the same thing would happen even if I were using Windows 7.
Whenever I view an image in Firefox, Chrome, Windows Picture Viewer or any other program besides Photoshop, the image is always displayed as it is and appears as crisp and sharp as it should. For example, if I load a picture that's 600x600 pixels outside of Photoshop, it would look exactly like it is - at 600x600.
But once I open it in Photoshop, and if it happens to be a very big picture (which it is for me, most of the time), the picture would look resized (i.e. smaller), but the Photoshop navigator would still say it's displayed at 100% magnification. So a 2000x2000 picture would basically look half its real size but still be at a zoom setting of 100% according to Photoshop.
That in itself isn't the problem, but trying to edit/crop the image is. If I were to select a part of the picture and resize it to, say, 100x100 pixels, the final image would be a bit blurry, even if I save it at "most high" quality. That obviously makes my image "un-usable" because the quality is so terrible. This doesn't happen at all on a computer without retina display but on mine it makes the task of editing images in Photoshop frustrating and pointless.
I really think it's an issue with retina display's native resolution not being supported in any version of Windows, so I'm hoping anyone who uses a Macbook Pro RD, Windows AND Photoshop could help me get around this problem.

Did you grab and install the graphic driver from Nvidia?
Apple or even Microsoft driver are not always the best.
Boot Camp 5.0 drivers to start just to enable the various chipsets and basic support.
http://www.bing.com/search?q=Windows+8+MacBook+Pro+Retina+cuda+driver+Nvidia
http://www.anandtech.com/show/6008/windows-8-on-the-retina-display-macbook-pro
http://blogs.nvidia.com/2012/06/new-macbook-pros-make-for-great-cuda-dev-platfor ms/
http://www.geforce.com/drivers/results/59645
https://developer.nvidia.com/cuda-downloads
https://devtalk.nvidia.com/default/topic/528725/forcing-retina-macbook-pro-to-us e-intel-graphics-for-desktop-freeing-memory-on-cuda-device-/
I see a black screen or distortion when I install Windows 8 on a MacBook Pro (Retina, 13-inch, Late 2012). How do I fix this?
The Windows 8 installer does not contain the correct graphics driver for your computer. You'll need to attach the USB media that contains the Boot Camp drivers during installation to address this issue. See this article for more information.
http://support.apple.com/kb/TS4517
www.apple.com/support/bootcamp
Windows 8, Thunderbolt devices are being recognized when I connect in. How do I fix this?
Disable the Windows 8 Fast Boot feature to allow Thunderbolt devices to be recognized. See Boot Camp: Thunderbolt devices not recognized after Windows 8 upgrade for instructions.
http://support.apple.com/kb/TS4531
Also with any GTX you may want to see if there is a CUDA driver as well.
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, at millions of colors
Also, Intel 4000 graphic driver, switching between Intel HD and Nvidia has been a problem.
From my (now old) notes:
I had problems with windows 7 after the installation using boot camp. The GT 650M was not showing up as the graphics adapter. I fixed the problem by inserting my windows support software CD a second time. I did not let it use auto run. I went into the Windows 7 directory and then into the Nvidia directory and ran setup.exe. This installed the Nvidia drivers for me. If this works correctly, you will have an Nvidia control panel available to you. I set the resolution to 2880x1800. I also set windows to 200% magnification.
I think what happens is that after you install windows, and then run the windows support CD, the main boot camp setup script seems to stop on the nvidia driver install--everything else installed correctly.
The 2012 MacBook Air suffers from an EFI firmware bug that under Windows blocks turbo mode.
Disable Windows 8’s Adaptive Brightness to Fix Dark Screen Problems2012 MacBook Air plagued by audio noise with Apple's Thunderbolt display
Intel Windows 8 Graphic Driver
Intel Download Center: http://downloadcenter.intel.com/
3rd Generation Intel HD Graphics 4000 Windows 8 64-bit
http://www.guru3d.com/news/intel-whql-graphics-driver-windows-8-download/
http://www.zdnet.com/blog/hardware/windows-8-an-installation-walk-through/14768
http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdri ve-with-virtualbox/

Connection Problem on Windows 10

I have installed SQL Server Express 2012 on my Windows 10 test computer and copied a database to it. I have been unable to connect to the db. I added a rule to the firewall that opened port 1433 to all traffic. I am using the following code to test the connection.
It works fine when I point to the original server but fails when pointing to the Win10 server, whether I use its IP address (192.168.1.140) or the address using NAT on my Linksys router.
Public Class Form1
    Dim strConn As String = "Data Source="
    Dim gMsg As String = ""
    Private Sub btnTestConnection_Click(sender As System.Object, e As System.EventArgs) Handles btnTestConnection.Click
        strConn += Trim(txtServer.Text) + ";Initial Catalog=HouseholdInventory;Persist Security Info=True;User ID="
        strConn += Trim(txtLoginName.Text) + ";Password=" + Trim(txtPassword.Text)
        Dim TestConn As New SqlClient.SqlConnection
        TestConn.ConnectionString = strConn
        Try
            TestConn.Open()
            btnTestConnection.Text = "Successful Connection"
            btnTestConnection.BackColor = Color.Green
        Catch ex As Exception
            gMsg = "The following error occurred trying to build the connection:" + vbCrLf + ex.Message
            If Not IsNothing(ex.InnerException) Then gMsg += vbCrLf + "Inner Exception:" + vbCrLf + ex.InnerException.Message
            gMsg += vbCrLf + "Connection String: " + vbCrLf + strConn
            MsgBox(gMsg)
            btnTestConnection.Text = "Connection Failed"
            btnTestConnection.BackColor = Color.Red
        End Try
    End Sub
End Class
I have two questions:
How do I set up SQL and the firewall so I can connect from a remote computer? Setting it up like I did for Win 7 and SQL Server 2008 R2 did not work.
What should a connection string look like if the connection goes through NAT with a specified port? I already redirect the default port 1433 to the computer with SQL Server 2008 R2 on it -- works fine. I need to leave that up and redirect a different
port to port 1433 on the Win10 test computer. The problem is the connection string. This is important because I am writing an app that allows the user to input the server, user Id and password on the first use. It is possible they will want to do this.
Thanks for any suggestions.

Hello,
Please read the following article about how to configure Windows Firewall for SQL Server.
https://msdn.microsoft.com/en-us/library/ms175043%28v=sql.110%29.aspx?f=255&MSPPError=-2147217396
Let me tell you that SQL Server Express installs by default as a named instance and not as default instance. Only default instances use port TCP 1433. Named instances use dynamic ports. You can use the following article to configure a static port for the SQL
Server instance.
https://msdn.microsoft.com/en-us/library/ms177440(v=sql.110).aspx
Named instances not using static port require the SQL Server Browser service to be started, and to connect to them you need to specify computername\sqlexpress.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Installation problem on windows server 2008 r2 datacenter edition 64bit

hi
today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
thanks for feedbacks!
regards, jan

> no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
If you take the time to give exact error messages then someone will be certainly able to help
> on windows server 2003, there are NO problems.
Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
Markus

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

TS3918 I am experiencing this problem on Windows 7 64 bit. Any suggestions would be appreciated.

I am experiencing aniTunes reinstall problem on Windows 7 64 bit. I have uninstalled the iTunes product and reinstalled 11.02 for windows 7 64 bit but can't get iTunes going again. The first error message I get is: "The file "iTunes Libirary.itl" cannot be read because it was created by a newer version of iTunes". The next error message I get is: "There is a problem sending the command to the program." Any suggestions on what to do next would be appreciated. ( I would have posted this in Windows area had I been given a choice.)

I believe that message can sometimes be a sign of a corrupt library file, unless of course you've tried to downgrade to an older build of iTunes. Restore it as described in this post.
tt2

CPU Overheating problem on Windows 8.1 Pro (installed with BootCamp)

There is a really important overheating problem on windows 8.1 (installed with bootcamp) even i do nothing Cpu is 50-60-70 Celcius degrees. This is really annoying problem. Most of users necessarily need windows OS for using third part programs that doesnt exist on OS X platform. I think this problem is important and has to be fixed as soon as possible.
My brand new Mac:
MacBook Pro (Retina, 15-inch, Mid 2014)
2,5 GHz Intel Core i7
16 GB 1600 MHz DDR3

I have the same problem on macbook pro retina 15 late 2013 - top configuration

RemoteApp 2012 problem on windows XP.

Similar Messages

Maybe you are looking for