RemoteFX not working

getting the following error when starting the VM with synthetic adapter:
'poc-vdi.contoso.local' Microsoft Synthetic 3D Display Controller (Instance ID {113560EA-48CD-4BD1-8828-FCEC44E2B5D5}): Failed to Power on with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA). (Virtual machine
ID A151F0D5-C1F0-43EB-8C5E-70258DF2FF26)
I also see this in the event log:
The GPU or system resources are insufficient for this server to run as a RemoteFX host. Verify this server's hardware against the requirements. Status Code: 14.
Hardware Specs:
4x Opteron 6172 (Magny-cores)
Tesla M2070Q
256 GB Memory
steps i've done so far:
installed server 2008 r2 enterprise sp1
installed hyper-v role
installed RDS Virtualization Host
installed NVIDIA drivers (tried both 275.65 and 266.67)
add 3d adapter to vm with win7 sp1 enterprise
any help would be greatly appreciated!

currently there is the one Tesla M2070Q and an onboard generic VGA adapter.
They are not bridged, and byt that i meant i went into the VM settings > add hardware > remotefx 3d adapter to add the synthetic adapter.

Similar Messages

RemoteFX not working properly

I used the instructions here http://www.microsoft.com/en-us/download/details.aspx?id=6006 to configure remote FX on our server.
I followed all the steps. Hwoever, at the end of step 4, it says that I am supposed to see event ID's 1000 and 1001 logged if RemoteFX is used on a session.
I only see 1000 logged. And audio from videos is very choppy. The video is a little bit choppy.
I've ensured that my Remote Desktop Client is configured to use 10MB bandwidth speed.
any ideas?

Hi,
Thank you for your posting in Windows Server Forum.
First of all check that hardware is fully supportable for enabling RemoteFX feature. You can check the requirement with
this link. Kindly check beneath article for troubleshooting issue of RemoteFX on Server 2008 R2.
Must-Have articles for Troubleshooting RemoteFX issues in Windows Server 2008 R2 SP1
http://blogs.technet.com/b/askperf/archive/2011/02/18/must-have-articles-for-troubleshooting-remotefx-issues-in-windows-server-2008-r2-sp1.aspx
Apart from this, please try to update the client RDP version for better result.
Hope it helps!
Thanks,
Dharmesh

Windows 7 (Ent) Sp1 on server 2012 R2 HyperV, RFX USB redirection not working

Hello,
I currently have windows server 2012 R2 with HyperV installed. I have built two virtual machines. A windows 8.1 and Windows 7 sp1. Both are enterprise editions
For RemoteFX the hypervisor is using a Zotec GTX 760 GPU. It recognizes it and uses it to apply remoteFX adapter on my Windows 7 Sp1 VM.
As you are aware I do not need to use a GPU to enable RFX on my Windows 8.1 it can do this without the need of a GPU.
Using an RDP client( v8.1) I can connect to my Windows 8.1 VM with a USB headset,memory Key or a printer and they all enumerate on the Virtual machine. The driver for each device installs
and I can use the device without any issues.
However this issue lies with the Windows 7 SP1 VM. I can connect to it via RDP( Same client) but I cannot redirect any devices to it. I have installed the latest integration services available on the VM. I have ran all updates available.
Because I have ran all updates the rdp version on the VM is running v8.1.
Previous to installing the updates USBr still was not working
I have enabled the following group polices under remote desktop services on the Windows 7 SP1 VM :
RDP 8.0 -- Enabled
Configure RFX -- Enabled
Is there a known issue with USB redirection not working on a Windows 7sp1 virtual machine hosted on server 2012 Hypervisor ??
Many Thanks
Brian

Hi,
According to the log above, I found that we run the script on both Server6 and Server7. Errors as below:
Server6: Conversion is not supported in restricted language mode or a Data section.
Server7: Couldn't figure out valid servers from the specified destination scope. Check your parameters and try again.
Since we can only run the RollAlternateserviceAccountPassword.ps1 Script on CAS server, the script not works well if Server6 is MBX server.
For Server7, based on the error message, it seems you still have no right to run the script/cmdlet.
Please add your account to Organization Management Role group(ADUC->domain.com->Microsoft Exchange Security Groups) to test if possible.
By the way, from Technet:
You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Client Access Security" entry in the Client Access Permissions topic.
Client Access Permissions
http://technet.microsoft.com/en-us/library/dd638131.aspx
Feel free to contact me if there is any problem.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

W530 Windows 8.1 Hyper-V nVidia Optimus not working

Well, I only just noticed when I tried to run a CUDA enabled application that my nVidia Optimus drivers are not working.
If I look in "Device Manager" then it only shows the Intel HD 4000 device, no sign of my nVidia card at all.
This only started happening after I enabled the Hyper-V role, and was working fine when I was using VMWare Workstation.
Setup:
Intel i7-3840QM | 32GB RAM | nVidia K2000M Optimus | 2x 512GB SSD
Windows 8.1 Pro | Hyper-V Role Enabled
Note - I don't want to force Discrete Graphics in the BIOS because I need decent battery life!

To me it seems that this will not work under Win 8 Pro.
I think that this would require the Windows OS Feature "RemoteFX", which is bundled by Microsoft only with the Server version of the OS.
If you are able to check whether it works fine with "RemoteFX", please inform me with a note here.
I had a similar issue. I opened the thread
Windows Phone 8.1 Emulator incompatible to nVidia Quadro graphic control?
I'm still waiting for a qualified response by Microsoft.
Maybe you can inform them, too, that bundling "RemoteFX" with Win Pro would be a good thing.
Greetings, pet-ro

Not work tablet UI on Prestigio 5080 PRO tablet

I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

Would it be possible for you to share the problematic pdf and OS information with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team

Why self-defined access sequences of free goods can not work?

Hi gurus,
I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
when i used the standard access sequences ,it is OK .
Can anybody tell me why?
thanks in advance

Dear Sandy,
Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
Make sure that these fields are flowing in your sales order.
I hope this will help you,
Regards,
Murali.

Adobe bridge raw not working with windows vista in photoshop cc, why?

adobe bridge raw not working in photoshop cc, is there a fix?

Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

Adobe Bridge CS5 in windows 7 not working?

Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
Tried to install creative cloud..again some error. Error code : 82
Could you please advice how I can fix my adobe bridge.

https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Partner application logoff not working

We have a partner application registered with sso with custom login screen. The login works fine. We use the following code to logoff the partner application in logoff.jsp
response.setHeader("Osso-Return-Url", "http://my.oracle.com" );
response.sendError(470, "Oracle SSO");
session.invalidate();
but the logoff is not working properly. It is not invalidating the session and the logout http request is not going from the application server to the sso server.
Are there any additional configurations for SSO logoff.Any help is appreciated.
Thanks

Hi
The WF should also trigger if i add the Partner function in UI.If i change any Attribute the WF triggers but i dont want to change the attribute when i add the partner function.
If i have only one event for WF that is Partner Change the WF will not trigger it for the 1st time when i save the UI. But next i come to the same saved doc and add a partner function then the Wf triggers.
So this means that Partner change is active.
the issue here is i need to trigger the WF on , the 1st time i save the UI, for which i wil be using Attribute Change and next time when i come back to saved doc the and add only the partner function and no changes are made to attributes the WF should again trigger.
Thanks
Tarmeem

IPhone 4 Voice Memos not working/saving

Hi there,
I'm having trouble with my voice memos too. Up until yesterday they were working fine and now, even though the record button works, the stop button does not and I can only pause them. Worse again is that the button to go into the menu to view all voice memos is not working so I can't play them from my iPhone and nothing new is saving to my iTunes. Please help!

I've always had the "Include Voice Memos" option selected. I think that only pertains to syncing voice memos from iTunes to the iPhone after it has been copied to iTunes. It has to be the new OS/iTunes not communicating that new memos have been recorded. For some reason they won't sync when I want them to, and then a few syncs later they magically appear.
By the way, I'm VERY comfortable with the iTunes and iPhone systems. I've been using iTunes for 5 years, and I've been recording class lectures with the iPhone voice memo app (and another app) for a couple years. It's not an error of not seeing that the memos were added; they don't exist in my library or music folders.
JUST OUT OF CURIOSITY, POST WHICH FIRMWARE YOU ARE RUNNING EXACTLY!!!
I'm on an iPhone 4, running firmware 4.0.1

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Ideapad A1-07 tablet wifi-bluetooth does not work!

Hello everyone. As you can see from the title on my tablet is not working wifi and bluetooth. When turning wifi tablet is reset and continues to be off and on until it forcibly turns off, and when you turn it on again, and do not touch wifi everything is normal and there are no problems with resetting. Can someone help me and give suggestion to solve this stupid problem. I'm from Croatia and I'm bad with the English writing.

Hi
Welcome To Lenovo Community
Please perform a factory reset
Please ensure you have backed any important data before doing factory reset
Hold the volume down and the power till Lenovo logo appears .
System will boot into recover mode. Follow the instructions
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Polygonal lasso tool not working with stylus on Surface Pro 2

Hi guys,
I'm new here so please bare with me if I'm posting in the wrong place or don't make immediate sense.
Hardeware / software used: surface pro 2 and I'm running photoshop CS5.
Problem is a fairly basic one: I am trying to make basic selections using the polygonal lasso tool (using the stylus that comes with the tablet) but it simply will not work. All I get when I touch the stylus to the screen is the circle that appears then fades. If I attach the keypad and try using that then it works no problem at all.
Does anyone have any ideas as to whether there is a particular setting that I need to switch on or off e.g. something relating to pressure sensitivity (although not sure why this would affect this particular selection tool)?
I've searched the web and come up with nothing so far so any help is greatly appreciated!
Thanks for your time
Scott

same problem on surface pro 3 !!!!
and i think quite significant, for lot of artists using polygonal lasso a lot (including me). How come that the stupid surface cannot work properly

Excite PRO 3G connection not work after Android v4.3 update

Hello,
I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35.
After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me.
Thank you

>After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
Go to the mobile network settings and search again for the 3G network.
I had similar problem with my Android Smartphone and my o2 provider
I started new search, then I chosen the O2 again and then I could solve the problem.
In case this does not work for you, recommend you to reset the tablet back to default (factory settings)

RemoteFX not working

Similar Messages

Maybe you are looking for