Remotely control the ITunes on Windows 7 64 bit PC with the new IPad

With the latest version of ITunes for both Win7 and the new IPad, I'm only able to use the new IPad to remotely control the ITunes on Windows 7 64 bit PC through wired connection ( ethernet cable ) to the wireless router. As soon as I connect my PC through wireless connection, the new IPad can not find my libraries.
Is this a known issue or am I missing some settings?
Thanks,

Are you using the 64 bit installer?
See also Recovering your iTunes library from your iPod or iOS device.
tt2

Similar Messages

How can I disassociate my songs in the iTunes store from another musician with the same name?

My songs in the iTunes store are showing up with the artist John Powers. That is my name. There seems to be another musician called John Powers, and our songs seem to be grouped together. I feel bad for the guy, as he seems quite clean-cut and my songs are all a bit... edgy. Is there any way to clarify that there is another artist also called John Powers, or will my songs forever be linked to his through our common name?
Here's a link to the artist page.
My songs are "Empire State of Meh," "Venereal Disease," and "Get Some Blow."
https://itunes.apple.com/us/artist/john-powers/id19118058
Thanks,
John Powers

alamoangels wrote:
Can someone please help me figure out how to make our recordings available to the world via iTunes??
go here: _*iTunes Content Providers*_.
JGG

Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added

Hi there,
I recently had the following situation, where I changed the source of my CSV file in Power Query.
Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
This is what I get from the Call Stack
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
Has anyone had this before and know how to fix it?
http://www.bidn.com/blogs/guavaq

Hi there
I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
Thanks
Gilbert
http://www.bidn.com/blogs/guavaq

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and it still won't open. Says the itunes library won't work with the older program. Help

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and reinstalled a older version and it still won't open. Says the itunes
library won't work with the older program. Please help

It says it cannot removed the older version of iTunes.
Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.)

Why is the left hand window and bar with the buttons for TOC/Search/Glossary not displaying in one client location?

Greetings all:
I have more years of experience with RoboHelp than I want to admit, but I have never run into this before. I have a published RoboHelp 9 project for an overseas client that displays exactly as it should when the published version is viewed by myself or another RoboHelp developer (not located where I am). However; the users at 1 of 2 two client sites do not see the left hand TOC window or the bar above the project with the buttons (the other site does see it). The users at both sites are using Internet Explorer 9, and I have been told there is no difference in their security set-up. I suspect that at the site where it is not displaying there is a security setting that is throwing it off, but I am not sure what to have them look for. Anyone have any ideas?
W. Keith

Do they not simply see the bar or is it empty? In the first situation, it seems they are opening the topic directly instead of via the start file.
What is the URL the users are using on both the locations? And do the users have a hyperlink 'Show' at the top of the topics?
Kind regards,
Willam

How can I get the iTunes library artwork to sync with the actual artist for iPhone 5S?

All of mine, and my friends, iPhone 5S artwork is all over the place. One artwork is for the wrong artist, etc.... how to fix?

Hi endeavorpilates,
Welcome to the Apple Support Communities! I understand your album artwork is matched to the wrong album or artist when you sync music from iTunes. If the artwork is correct in iTunes, I suggest removing all music from the iPhone 5s by syncing it off > reset the iPhone > sync the music back on. The steps for syncing music off and back on can be found in the following article.
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
This article explains how to reset your iPhone 5s.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
I hope this helps,
-Joe

TS1424 What should I do if the ITunes store charge me twice with the same item?

Hi, Has anyone been charged twice with just one same item by ITunes store? How could I get my money back?Thanks.

try doing a full reset bay going to system preferences .the go to general .but first make sure you have all your content and information back up before you doing the erase all content and settings ,because it going to delete all the content and information on the iPad going back in to factory settings

Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

To run iTunes in 64-bit mooose the "Get Info" command in the File menu, and uncheck the "Open in 32-bit mode" checkbox in the iTunes Info window. but i doesn't have the tick thing plus i redownloaded it a

To run iTunes in 64-bit mode, select the iTunes application in the Finder, choose the “Get Info” command in the File menu, and uncheck the “Open in 32-bit mode” checkbox in the iTunes Info window. but i doesn't have the tick thing plus i redownloaded it again and same message comes up

Have you disclosed the "General" brick in the "Info" panel? Click the disclosure triangle to the left of "General":
What is your iTunes version and MacOS X version?
-- Léónie

I cannot install iTunes on Windows 7 I receive the Error 7 (Windows Error 193).

I cannot install iTunes on Windows 7 I receive the Error 7 (Windows Error 193).
I have uninstalled and reinstalled a few times but with no luck. Does anyone have another option?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the above steps haven't helped try installing:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for a 32-bit core program, similar to previous 64-bit releases of iTunes.
Or roll back to:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
as appropriate.
tt2

HT1751 After "Restoring iTunes Library Backup" it wont link to the files in the iTunes folder. I've followed the correct procedure, and iTunes lists all my music correctly (but with no artwork), but can't locate any of the files. Using Windows 7. Help ple

After "Restoring iTunes Library backup" it wont link to the files in the iTunes folder. I've followed the procedure as described, and the iTunes folder is in the correct location. iTunes lists all my music correctly (albeit with no artwork), but can't locate any of the files.
I've been restoring my iTunes folder from a backup hard drive to a new computer on which I've downloaded the latest iTunes (10.7). If this is a newer version than the one I backed up with could this be the problem? (I had the latest (to my knowledge) iTunes when I backed up the folder about 3 weeks ago, was this version 10.7?)
Or is the version of iTunes (within recent updates) not an issue when restoring a library?
Using Windows 7.
Any help please?

From the top of the page where the scripts live...
The general method of use is to download the script to a folder of your choice, e.g. your Desktop, Downloads folder or create a folder at ...\iTunes\Scripts. Select a playlist or highlight some tracks in iTunes and then double-click on the script to execute it. If no specific tracks are selected the script will try to work with all tracks in the current playlist. Some scripts offer a choice of track by track confirmation of changes or fully automatic processing of the selection. Many of the scripts can optionally display a progress bar while running.
You are strongly advised to backup your entire library, or at the very least the iTunes Library.itl file, before use. Test the behaviour of your chosen script on a small group of files first to make sure it does what you want before applying it to large numbers of files.
Most builds of Windows will execute *.vbs scripts when you double-click them. If that doesn't happen then you might need to visit the Add/Remove Programs or Programs & Features control panel to enable the Windows Scripting Host. I can track down details if you have issues.
Backing up and restoring data is an area that is often glossed over. Most people don't try to learn much about it until they've lost something important. (Me too )
If your iTunes library was in the usual layout then normally copying the whole iTunes folder from the User's Music folder in the old computer to the User's Music folder in the new one will usually work fine. Ideally this is done before iTunes is installed so that there is no empty library to replace, and all settings are picked up from the old library. This post contains more details.
tt2

Trying to install itunes on windows vista and get the following error message:

Trying to install itunes on windows vista and get the following error message: An error occurred during the installation of assembly "Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKey Token="1fc8b3b9a1e3b",process orArchitecture="x86"". Please refer to Help and Support for more information. HRESULT: 0x80070424.

A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time?

I have a new computer now with windows 8. Old one was windows 7. The itunes library contains all I expect on new computer. Ipod will not sync with content. It says it is syncing but only picks up 1 tune. Solution please. I am on itunes 64 but it makes no

I have a new computer now with windows 8. Old one was windows 7. The itunes library contains all I expect on new computer. Ipod will not sync with content. It says it is syncing but only picks up 1 tune. Solution please. I am on itunes 64 but it makes no difference from 32 bit.

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Does Windows ME work with the latest iTunes software?

I have a couple of questions. My brother gave me his ipod and I tried to download the cd that came with the box. I recieved an error message about being able to register the ipod. Does my brother have to call to have my name replaced with his or do I have to call and who? My next question is in regards to my subject heading. When I tried to download iTunes from the disc is gives me an error message that it is only compatible with windows 2000 or XP. Isn't ME and 2000 one in the same? Why doesn't work?

You cannot use iTunes under Windows ME, so unless you upgrade your PCs OS, you won't be fully supported and will not be able to purchase music tracks from the iTunes Music Store which is only possible through iTunes.
For just synchronizing music tracks with your iPod, you could get third-party utility such as XPlay or EphPod (Google for them and others) for handling the music transfer.
Here is a possible work-around for using the iPod under Windows ME: Guide to iPod and Windows ME
NOTE: some of the instructions are a bit dated for the newer 2nd Gen mini and later iPods
(1h is not necessary & for 1b, you should download the Updater software not use the CD: Get iPod Updater ).
Off topic: Hiya b! Long time between chats. Doing, as you always do, a splendid job of solving the unsolvable.

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Remotely control the ITunes on Windows 7 64 bit PC with the new IPad

Similar Messages

Maybe you are looking for