Remotely installing the Inventory Only Module
Version 11.3
I want to install the inventory only module to multiple windows devices. The only documentation I can find states you have to download the agent and install at the windows device. https://www.novell.com/documentation...deployment.pdf. Is there a way to install this module using the ZENworks console? I can't seem to find it. Deployment task is only set to to install the ZENworks Adaptive Agent.
Thanks,
Bill
I also like to point out that the Discovery tool is not designed to be
the only way or even necessarily the main way of pushing agents.
Login Scripts, AD Scripts, or any other management tool can push the
agents (If you don't have any management tools, you should be
considering the full product.)
Even a Scripted PSEXEC would work for you, but only in theory.
The issue is that by default, Non-Domain Joined PCs will not permit
remote software installation unless you perform quite a bit of manual
configuration. So if your PCs are not in a domain and you have no
management tools, you will need to visit the PC to manually configure it
to allow a remote push at a future time that you hope the PC may be
powered on and not in use. So if you are going to do all that work, it
would only make sense to install the agent while you are there at that time.
In my mind, the Discovery and Deployment tool is best for discovering
straggler devices missing the agent and less at deploying since there
are so many limitations due to the very nature of basic default Windows
security.
The best bet in my mind is to try and figure out a way to use your
current management methods, even if they are as simple as logon scripts,
to push/pull down the agent instead of trying to remotely access the PC
in the hopes it is on, since that method has a whole series of hurdles
that are tough to overcome.
On 10/8/2014 8:30 AM, Shaun Pond wrote:
> [email protected],
>
> then it becomes a much bigger beast to deal with - the full agent has
> the capability of being pushed, but the inventory only agent wasn't
> designed to do that.
>
Going to Brainshare 2014?
http://www.brainshare.com
Use Registration Code "nvlcwilson" for $300 off!
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
Similar Messages
-
How do I install the "Adobe Output Module" Into Bridge?
CC does not come with the "Adobe output Module"
You can not make PDF contact sheets without this.
Are there any current instructions on how to do this?Google "adobe bridge output module"
Install Adobe Output Module -
Installing Inventory only agent on VMWare ESXi
Hello,
did anybody manage to install the Inventory-only-Agent (V 11.2.3) on a
VMWare ESXi 5.1-Server? We would like to collect the inventory data for
our CMDB. When i start the installation i get the follwoing errors:
/tmp # ./zenumia-install.sh -s mycollectionserver
Collection Server is mycollectionserver
installing zenumia to /opt/novell/zenworks/umia
../zenumia-install.sh: line 188: arch: not found
unrecognized OS, not setting SIPLATFORM
OS tagged as unknown, sysinfo package is mcsysinfo-noui-10-.sh
../zenumia-install.sh: line 223: whoami: not found
user is
Must be root to install. Aborting install.
So there are some needed commands like "whoami" missing and the OS ist
unknown.
I tried to collect the inventory data via a Discovery task, but the
collected information is quite poor. No vendor-specific Hardware info, etc.
Kind regards,
ThomasThomas,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Inventory Only Agent 11.2.3a for AIX 7
Hi: Someone has installed the inventory only 11.2.3a on AIX 7.1?
Is supported? I saw in the documentation of 11.2 which is only supported on AIX 6.1...
The Comments are welcome... Sergio.On 04/04/2013 18:46, pwolff2000 wrote:
> Is this suppose to work?? I have the latest ZCM managed Mac agent
> installed and running correctly on OSX 10.6, but my attempt to duplicate
> that success with 10.8 is a NO GO. I can never get the MAC Computer to
> show a list of Closest Servers, therefore no Inventory. The computer
> shows registered and does appear in ZCC. I also can not Remote Control
> the computer, it allows the connection (using Password) but never shows
> a desktop, just a plain gray screen. Any help is welcome!
I note subject includes "11.2.3" - presumably you're aware that was
pulled and we're awaiting 11.2.3a?
I'm also guessing that by "10.8" you don't mean 10.8.0 so which version
of 10.8 are you testing? 10.8.x
Are you hosting ZENworks on Windows Server or Linux? I don't think it
matters but I can test against ZENworks on Linux.
HTH.
Simon
Novell Knowledge Partner -
Trouble installing the PERL modules for the ITunesU script
I am trying to install the modules specified in the PERL script. I get an error when trying to install which I think is a result of a problem with the MAC developer tools. This is the output that I get when trying to install the Digest::SHA module
Can someone please tell me how to fix this?
cpan> install Digest::SHA
CPAN: Storable loaded ok
Going to read /Users/admin/.cpan/Metadata
Database was generated on Wed, 21 Mar 2007 01:09:40 GMT
Running install for module Digest::SHA
Running make for M/MS/MSHELOR/Digest-SHA-5.44.tar.gz
CPAN: Digest::MD5 loaded ok
CPAN: Compress::Zlib loaded ok
Checksum for /Users/admin/.cpan/sources/authors/id/M/MS/MSHELOR/Digest-SHA-5.44. tar.gz ok
Scanning cache /Users/admin/.cpan/build for sizes
Digest-SHA-5.44/
Digest-SHA-5.44/t/
Digest-SHA-5.44/t/state/
Digest-SHA-5.44/t/state/state.1
Digest-SHA-5.44/t/state/state.256
Digest-SHA-5.44/t/state/state.512
Digest-SHA-5.44/t/state/state.384
Digest-SHA-5.44/t/4-bitstr-large.t
Digest-SHA-5.44/t/2-nist-vectors-byte.t
Digest-SHA-5.44/t/nist/
Digest-SHA-5.44/t/nist/Readme.txt
Digest-SHA-5.44/t/nist/bit-messages.sha1
Digest-SHA-5.44/t/nist/byte-hashes.sha1
Digest-SHA-5.44/t/nist/byte-messages.sha1
Digest-SHA-5.44/t/nist/COPYRIGHT
Digest-SHA-5.44/t/nist/bit-hashes.sha1
Digest-SHA-5.44/t/1-exist.t
Digest-SHA-5.44/t/5-hmac-rfc2202.t
Digest-SHA-5.44/t/2-nist-sha-base64.t
Digest-SHA-5.44/t/2-nist-sha-1.t
Digest-SHA-5.44/t/4-bitstr-increasing.t
Digest-SHA-5.44/t/2-nist-sha-256.t
Digest-SHA-5.44/t/0-pod.t
Digest-SHA-5.44/t/0-pod-coverage.t
Digest-SHA-5.44/t/7-ireland.t
Digest-SHA-5.44/t/2-nist-sha-224.t
Digest-SHA-5.44/t/2-nist-sha-384.t
Digest-SHA-5.44/t/3-gillogly-easy.t
Digest-SHA-5.44/t/6-dump-load.t
Digest-SHA-5.44/t/2-nist-sha-512.t
Digest-SHA-5.44/t/5-hmac-fips198.t
Digest-SHA-5.44/t/gillogly/
Digest-SHA-5.44/t/gillogly/state.110
Digest-SHA-5.44/t/gillogly/state.011
Digest-SHA-5.44/t/5-hmac-woodbury.t
Digest-SHA-5.44/t/3-gillogly-hard.t
Digest-SHA-5.44/t/5-hmac-sha-256.t
Digest-SHA-5.44/t/2-nist-sha-oo.t
Digest-SHA-5.44/t/2-nist-vectors-bit.t
Digest-SHA-5.44/t/1-hello-world.t
Digest-SHA-5.44/t/4-bitstr-random.t
Digest-SHA-5.44/examples/
Digest-SHA-5.44/examples/dups
Digest-SHA-5.44/Changes
Digest-SHA-5.44/MANIFEST
Digest-SHA-5.44/typemap
Digest-SHA-5.44/src/
Digest-SHA-5.44/src/sha.c
Digest-SHA-5.44/src/sha64bit.c
Digest-SHA-5.44/src/hmacxtra.c
Digest-SHA-5.44/src/sha.h
Digest-SHA-5.44/src/hmac.h
Digest-SHA-5.44/src/shaxtra.c
Digest-SHA-5.44/src/hmac.c
Digest-SHA-5.44/src/sha64bit.h
Digest-SHA-5.44/META.yml
Digest-SHA-5.44/SHA.pm
Digest-SHA-5.44/SHA.xs
Digest-SHA-5.44/shasum
Digest-SHA-5.44/Makefile.PL
Digest-SHA-5.44/README
Removing previously used /Users/admin/.cpan/build/Digest-SHA-5.44
CPAN.pm: Going to build M/MS/MSHELOR/Digest-SHA-5.44.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for Digest::SHA
-- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
cpan>
I installed the Developer tools from Apple's web site.
Thanks
DonnaI figured it out. I discovered that the developer tools weren't installed by default on the Darwin OS. I downloaded them from the Apple site, installed the dmg file and then installed the required Perl modules and then it worked beautifully.
The problem was that the modules couldn't make properly when being installed.
Fun Fun
Donna -
While installing the query,i am getting one error
Hi all,
I am installing the inventory queries with grouping options only necessary and install option is simulate installation and i collected the object and install.
this is the process i followed,but i am getting the below stated error.
can anyone please help me.
ERROR:
Error when activating element 0BM0V1UB4UZLCZB7RQ71E1B96.
BEx transport request 'WW1K901044' is not available or not suitable.ok,i understand sharayu.
But one small doubt these assigning of workbench request is after collection of the objects or what.Please collect me if i am wrong.
i will do the below steps,Please collect me if i am wrong.
step1:first i will select grouping option as only necessary
step2:install option is simulate installation
step3:i will find my query and transfer.
step4:i will select install.
step5:so,after the above steps do i need to assign it to my previous request.
Please let me know and i need to complete this task by the end of the day.
Thanks
Lakshmi -
Inventory Only vs. Managed
I want to Inventory our Servers (100+). We have ZCM10 with the Asset Mgmt module added. We have 1 Zone, but we have a Satellite office that has it's own servers that they will Inventory. Of course we also have workstations that will be fully managed at each site as well.
I put the Inventory only client on a Windows server and it shows up under Devices/Servers on the Inventoried tab. Looks good.
Now I want to configure the Inventory policies - in particular when my servers at my location get scanned and what the Data Collection Form looks like. I can set this at the top Zone level under Configuration, Inventory but that will affect all Servers, Workstations, etc. I can set it at the Devices, Managed, Servers level but these are Inventoried Only not Managed. There is no Settings - Inventory tab for Inventoried Only.
How can I separate Inventoried Only Servers out and apply Inventory policies only to those.cleik,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Remote install on ubuntu system
I have an Ubuntu system, and for fun, I want to try to do an ssh based install of arch. I followed the guide on the wiki, but the bootstrap script doesn't appear to be valid for the current state of arch. I found a "Newer"(https://wiki.archlinux.org/index.php/Archbootstrap) script but it didn't "appear" to install everything correctly. So basically I'm looking for either a up-to-date bootstrap script, or even better a guide on how to bootstrap it manually. I would call myself an intermediate user, but I'm a beginner when it comes to advanced install techniques.
Thanks in advanceI think remote install utility works only with MB Air and Mac mini server.
Well, something sure doesn't seem to work. I've just tried every variation I can think of (both wired & wireless) with my iMac 24" as the source computer & my 2008 MacBook as the target while using Remote Install Mac OS X & no matter what I try, the MacBook does not see the Snow Leopard disc in the iMac as a startup option. Both computers are running 10.6.2 & all Apple software on them is up to date.
In fact, following the instructions on page 2 for upgrading using another computer’s optical drive, I don't even see the "Remote Disc under Devices in a Finder window sidebar" it says I should see in step 5. CD & DVD Sharing is on & "green" for both computers.
Now that I think about it, I'm not sure CD & DVD Sharing ever worked as indicated, even when both Macs were running Leopard. I could play a DVD movie in one Mac's drive on the other Mac, but only if I launched DVD Player & navigated to it as a shared item. It never appeared in the "Devices" section of the Finder sidebar. (And yes, I have the Finder set to show all DVD's, CD, & HD's in the sidebar.)
I wonder if anybody else besides MB Air & Mini server users is getting better results. Anybody care to comment? -
Can I install 8.5.1 modules on a LABVIEW 8.5 system
Can I install 8.5.1 modules especially ARM module on a LABVIEW 8.5 system ...
Since 8.5.1 is just a minor upgrade to 8.5 I guess it should do ..
But does it work effectively while importing code to ARM processorHi Bharath,
No, it's not a good ideal to install an 8.5.1 module on LabVIEW 8.5. It may function, but chances are that it won't. The versions should match exactly.
You will want to upgrade your LabVIEW to 8.5.1 before installed the LabVIEW Embedded Module for ARM Microcontrollers. (Of course, you are welcome to try, but I suspect that you will get an installation error.)
Kevin S.
Applications Engineer
National Instruments -
Hello,
A little question,
Is the "Software usage" feature (Hours open/hours active) is enabled on workstations with the inventory only agent ?
Thanks for your answer.
Sincerly,
Julien.jupap7,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
How to install the Remote Desktop Services role on a Windows 2012 R2 Server
Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor -
I have several friends and family who are looking for a central place to access information from ( Pictures, home movies etc ). So I am considering setting up an OSX Lion Server. There are some other things I can use it for as well.
Here is my question:
If I were to purchase the Apple Remote Desktop with Unlimited licenses, would I be able to install the client software on each of there computers/laptops and have them remote desktop into the server? Or would I have to install the Admin software on each? Do they intend it to be used strictly as one admin to access many clients?
I always could set up a network drive so they can log in and just see the folders they have created with space on the server I provide them. But I want them to be able to log an and actually use it as a Remote Desktop.
Thanks,
EricDave,
Thanks for the feedback. I understand that ARD is meant for Remote Administration, but I was not sure if it could be used for my purpose as well. The reason I was looking to do it this was was because I read several articles online about security and performance issues with setting up VNC and activating screen sharing. Unless I am misunderstood.
As far as people's activities on the server, mostly it is going to be used as a place for them to store their media. I will only allow own person ( Who I trust and I know wont botch the server ), to run applications. Everyone else will be restricted to uploading and downloading content to their designated account on the server as well as a community share on the server.
I appreciate your help.
Thanks,
Eric -
Some computers download and install the two approved updates, others only download Windows Update Agent and not the approved updates.
UN-successful Windows Update Log:
2014-05-07 09:33:56:180
1036 e70
Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-05-07 09:33:56:220
1036 e70
Misc = Process: C:\Windows\system32\svchost.exe
2014-05-07 09:33:56:221
1036 e70
Misc = Module: c:\windows\system32\wuaueng.dll
2014-05-07 09:33:56:180
1036 e70
Service *************
2014-05-07 09:33:56:221
1036 e70
Service ** START ** Service: Service startup
2014-05-07 09:33:56:222
1036 e70
Service *********
2014-05-07 09:33:56:544
1036 e70
Agent * WU client version 7.6.7600.256
2014-05-07 09:33:56:545
1036 e70
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-05-07 09:33:56:546
1036 e70
Agent * Access type: No proxy
2014-05-07 09:33:56:547
1036 e70
Agent * Network state: Connected
2014-05-07 09:33:57:315
1036 e70
Setup Service restarting after SelfUpdate
2014-05-07 09:33:57:545
1036 e70
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 09:33:57:592
1036 e70
Report CWERReporter::Init succeeded
2014-05-07 09:33:58:326
1036 e70
Report *********** Report: Initializing static reporting data ***********
2014-05-07 09:33:58:376
1036 e70
Report * OS Version = 6.1.7601.1.0.65792
2014-05-07 09:33:58:376
1036 e70
Report * OS Product Type = 0x00000030
2014-05-07 09:33:58:394
1036 e70
Report * Computer Brand = Hewlett-Packard
2014-05-07 09:33:58:444
1036 e70
Report * Computer Model = HP Compaq 4000 Pro SFF PC
2014-05-07 09:33:58:455
1036 e70
Report * Bios Revision = 786H7 v02.00
2014-05-07 09:33:58:504
1036 e70
Report * Bios Name = Default System BIOS
2014-05-07 09:33:58:554
1036 e70
Report * Bios Release Date = 2011-01-31T00:00:00
2014-05-07 09:33:58:554
1036 e70
Report * Locale ID = 1033
2014-05-07 09:34:03:562
1036 f08
Report REPORT EVENT: {082D455B-6E51-4238-A997-1D27D9214A72}
2014-05-07 09:33:58:565-0400 1
199 101
{0011B9ED-9189-4D58-BE25-FA2F13FC3D6C}
1 240005
SelfUpdate Success
Content Install Installation successful and restart required for the following update: Windows Update Aux
2014-05-07 09:34:03:614
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:34:42:049
1036 e70
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-05-07 09:34:42:049
1036 e70
Agent *********** Agent: Initializing global settings cache ***********
2014-05-07 09:34:42:049
1036 e70
Agent * WSUS server: http://csd26.csd.local:80
2014-05-07 09:34:42:049
1036 e70
Agent * WSUS status server: http://csd26.csd.local:80
2014-05-07 09:34:42:049
1036 e70
Agent * Target group: CO
2014-05-07 09:34:42:049
1036 e70
Agent * Windows Update access disabled: No
2014-05-07 09:34:42:063
1036 e70
DnldMgr Download manager restoring 0 downloads
2014-05-07 09:34:42:089
1036 e70
AU ########### AU: Initializing Automatic Updates ###########
2014-05-07 09:34:42:089
1036 e70
AU AU setting next detection timeout to 2014-05-07 13:34:42
2014-05-07 09:34:42:090
1036 e70
AU AU setting next sqm report timeout to 2014-05-07 13:34:42
2014-05-07 09:34:42:090
1036 e70
AU # WSUS server: http://csd26.csd.local:80
2014-05-07 09:34:42:090
1036 e70
AU # Detection frequency: 22
2014-05-07 09:34:42:090
1036 e70
AU # Target group: CO
2014-05-07 09:34:42:090
1036 e70
AU # Approval type: Scheduled (Policy)
2014-05-07 09:34:42:090
1036 e70
AU # Scheduled install day/time: Every day at 3:00
2014-05-07 09:34:42:090
1036 e70
AU # Auto-install minor updates: Yes (User preference)
2014-05-07 09:34:42:105
1036 e70
AU Initializing featured updates
2014-05-07 09:34:42:116
1036 e70
AU Found 0 cached featured updates
2014-05-07 09:34:42:116
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:34:42:117
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:34:42:117
1036 e70
AU AU finished delayed initialization
2014-05-07 09:34:42:117
1036 e70
AU AU setting next sqm report timeout to 2014-05-08 13:34:42
2014-05-07 09:34:42:117
1036 e70
AU #############
2014-05-07 09:34:42:117
1036 e70
AU ## START ## AU: Search for updates
2014-05-07 09:34:42:117
1036 e70
AU #########
2014-05-07 09:34:42:291
1036 e70
AU <<## SUBMITTED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:34:42:341
1036 f08
Agent *************
2014-05-07 09:34:42:341
1036 f08
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 09:34:42:341
1036 f08
Agent *********
2014-05-07 09:34:42:341
1036 f08
Agent * Online = Yes; Ignore download priority = No
2014-05-07 09:34:42:341
1036 f08
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-05-07 09:34:42:341
1036 f08
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-05-07 09:34:42:341
1036 f08
Agent * Search Scope = {Machine}
2014-05-07 09:34:42:341
1036 f08
Setup Checking for agent SelfUpdate
2014-05-07 09:34:42:342
1036 f08
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 09:34:42:349
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-05-07 09:34:42:392
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:669
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-05-07 09:34:44:676
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:754
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-05-07 09:34:44:777
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:781
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-05-07 09:34:44:788
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:837
1036 f08
Setup Determining whether a new setup handler needs to be downloaded
2014-05-07 09:34:44:855
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
2014-05-07 09:34:44:862
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:862
1036 f08
Misc WARNING: Digital Signatures on file C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe are not trusted: Error 0x800b0001
2014-05-07 09:34:44:862
1036 f08
Setup WARNING: Trust verification failed for WuSetupV.exe. It will be deleted and downloaded, error = 0x800B0001
2014-05-07 09:34:44:863
1036 f08
Setup SelfUpdate handler update required: Current version: 7.6.7600.256, required version: 7.6.7600.256
2014-05-07 09:34:44:873
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:44:932
1036 f08
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:44:933
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:45:048
1036 f08
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:45:048
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:45:234
1036 f08
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:45:235
1036 f08
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-05-07 09:34:48:415
1036 f08
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-05-07 09:34:48:415
1036 f08
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
2014-05-07 09:34:48:424
1036 f08
PT WARNING: Cached cookie has expired or new PID is available
2014-05-07 09:34:48:424
1036 f08
PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
2014-05-07 09:34:48:424
1036 f08
PT Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
2014-05-07 09:34:48:454
1036 f08
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2014-05-07 09:34:48:454
1036 f08
PT WARNING: SOAP Fault: 0x00012c
2014-05-07 09:34:48:454
1036 f08
PT WARNING: faultstring:Fault occurred
2014-05-07 09:34:48:454
1036 f08
PT WARNING: ErrorCode:ConfigChanged(2)
2014-05-07 09:34:48:454
1036 f08
PT WARNING: Message:(null)
2014-05-07 09:34:48:454
1036 f08
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2014-05-07 09:34:48:454
1036 f08
PT WARNING: ID:cb5babad-3a1d-4e6b-946e-736ed4746e3f
2014-05-07 09:34:48:464
1036 f08
PT WARNING: Cached cookie has expired or new PID is available
2014-05-07 09:34:48:464
1036 f08
PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
2014-05-07 09:34:48:464
1036 f08
PT Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
2014-05-07 09:35:06:497
1036 e70
AU Forced install timer expired for scheduled install
2014-05-07 09:35:06:497
1036 e70
AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-05-07 09:35:06:497
1036 e70
AU Setting AU scheduled install time to 2014-05-08 07:00:00
2014-05-07 09:35:06:498
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:14:236
1036 f08
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-05-07 09:35:14:236
1036 f08
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
2014-05-07 09:35:20:118
1036 f08
Agent * Found 0 updates and 79 categories in search; evaluated appl. rules of 859 out of 1494 deployed entities
2014-05-07 09:35:20:194
1036 f08
Agent *********
2014-05-07 09:35:20:194
1036 f08
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 09:35:20:194
1036 f08
Agent *************
2014-05-07 09:35:20:209
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:35:20:209
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:35:20:209
1036 bb8
AU >>## RESUMED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:35:20:209
1036 bb8
AU # 0 updates detected
2014-05-07 09:35:20:209
1036 bb8
AU #########
2014-05-07 09:35:20:209
1036 bb8
AU ## END ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:35:20:209
1036 bb8
AU #############
2014-05-07 09:35:20:210
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:20:210
1036 bb8
AU Featured notifications is disabled.
2014-05-07 09:35:20:211
1036 bb8
AU AU setting next detection timeout to 2014-05-08 11:19:46
2014-05-07 09:35:20:211
1036 bb8
AU Setting AU scheduled install time to 2014-05-08 07:00:00
2014-05-07 09:35:20:212
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:20:212
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:25:183
1036 f08
Report REPORT EVENT: {C1B39107-F517-4477-AAE3-9B1F1D6002BF}
2014-05-07 09:35:20:193-0400 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 0 updates.
2014-05-07 09:35:25:183
1036 f08
Report REPORT EVENT: {669B9537-BB71-4190-BA58-A97F725AE4D8}
2014-05-07 09:35:20:194-0400 1
156 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Pre-Deployment Check
Reporting client status.
2014-05-07 09:35:25:184
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:37:32:440
1036 f08
Report Uploading 3 events using cached cookie, reporting URL = http://csd26.csd.local:80/ReportingWebService/ReportingWebService.asmx
2014-05-07 09:37:32:454
1036 f08
Report Reporter successfully uploaded 3 events. -
Help installing the OUTPUT MODULE
I installed the download for the OUTPUT module in bridge, by following the directions on the adobe website. The module name appears in the upper right of the screen, but nothing happens when I click on the name. I put the module folder into the location ~/Library/Application Support/Adobe/Bridge CC folder. I could not find a Bridge CC Extensions folder. I BELIEVE I PUT IT INTO THE RIGHT LOCATION.
There is no Adobe Bridge CC 2014. There are only Adobe Bridge CS6 and Adobe Bridge CC. Adobe Bridge CC has been modified to invoke/work with Photoshop CC 2014. This is a problem for users that have both Photoshop CC and Photoshop CC 2014 installed. From my previous append you should see where Adobe Output Module get installed on Window. I use the Adobe instructions for installing the output module into Adobe. Here is what I downloaded and where the output module workspaces get installed.
I see two options in the Adobe Bridge CC output module PDF and some poor web Galleries. -
iMac late 2009 reads only 2GB RAM,I have re-installed the card 10 times now,what else could I do?
Please give us some more details on what exactly has gone wrong with your iMac.
What size RAM module/s are you trying to install and where did you purchase the RAM module/s from?
RAM has to be installed in matched size pairs.
Make sure the RAM module clicks into place. You need to apply a little bit of force to get the module to slide in and clIck into its module slot location.
Correct, compatible and reliable Mac RAM can ONLY be purchased from online RAM sources Crucial memory or OWC (macsales.com).
If you purchased RAM from ANY other source and still can't get the RAM to work, return it for a full refund and buy RAM from the sources I have listed.
Maybe you are looking for
-
I'm wondering if anyone else has had this happen or maybe can offer a solution. I have several Dynamic XML forms designed in LiveCycle ES2 v9 that since our ministry switched to Reader X have been failing. At first, the save button greys out (even th
-
Difference Between S_ALR_87012326 S_ALR_87012328
Hi guys I am using these two reports with same selection criteria. S_ALR_87012326 S_ALR_87012328 But report S_ALR_87012326 is showing Less G/L Account whilr report S_ALR_87012328 show many G/L Accounts for a same company. Can anyone tell me whats the
-
View State question - changing states and custom states
Hi all, I'm working on an application that lets a user register for an event. Each event has associated child information: conferences, tickets, etc. associated with it. What I'm trying to do is create some sort of checkbox list so that, when a user
-
Starting and Stopping Repository Mgr Service
Hello All, I am running Forte 3.0.D.0 on Windows NT 4.0. At night, I run batch files to backup and clean the repository. With previous versions of Forte (before 2.H) my scripts simply did an rpstop, rpcopy, rpclean and finally a rpstart to start the
-
As I am trying to build a custom website using Site Studio, I am facing some problems to build a static fragment list here.I find there is a reference to a SS_DATAFILE in a code for a snippet.However this file is not present anywhere in the content s