Remotes will not work with Apple TV

I am so very frustrated with my Apple TV right now. It has worked flawlessly for over a year, using both the Apple TV remote and the Apple remote on my iPhone.
A couple of weeks ago, my ATV Remote stopped working, but I figured it was the battery. I happily continued with the iPhone Remote, but then yesterday that also stopped working. I replaced the ATV Remote, but still no luck. I have tried re-pairing the ATV and ATV Remote, but get no flashes of confirmation.
I finally hooked up the ATV to my PC via Firewire and restored it to original. I hooked it back up to my TV and it came on with all of channels that I am used to seeing. However, STILL no communication between either of the remotes.
If I had not recently purchased a great speaker set for the ATV television (main room), I would just chuck it and get another Roku, but I would miss my iTunes music soooo much.
Can anyone help???

Thanks, Vazndrew, for the reply.
As a last resort, today I deleted the remote app from my 5S, reinstalled it, but I am still getting the message: "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account XXXXX.com"
Since the beginning of this fiasco, I have turned Home Sharing on and off and on again in iTunes on my computer, and verified it is also turned on on my 5S. I have no idea how to turn it on in the ATV since I cannot get a remote to work. Hooking it up to the PC does not seem to give that option either.
Not sure if I should see it or not, but hooked up to the the PC, in iTunes the ATV does not show as a device.

Similar Messages

  • My remote will not work with my TV @nywhere card, Please help.

    I have just installed my TV @nywhere card and it works great. I have all the cables plugged in right but I can't get the remote control to work. I even tried a new battery. I'm running windows XP pro. Any Suggestions?

    What's wrong with it is it's broken. The power button is broken. The dock port may be broken. The battery may have reached the end of its useful life.
    Make an appointment at the genius bar of your local Apple Store and have it checked out. There are no words that will fix failed or broken hardware other than "here is my credit card"...
    An out of warranty replacement for an iPhone 4 is only $149.

  • Why does the remote app not work with Apple TV 1st gen anymore.

    This is a review I just left on the app store, I am posting it word for word, and i hope that dowsnt complicate anything. My hope is that this finds the right party to address the situation, and if any user has a fix, I would love to hear it.
    I have an Mac mini running iTunes as a server, I have 2 airport expresses to allowing airplay to them for different rooms, and I also have 2 Apple TV first gens... I can play one stream of music from the server, and have the option of playing 2 other streams of music from the apple tv's as they have a built in hard drive to sync music to. I can send any of the feeds to any o the devices in any room and i love it. This whole system used to work flawlessly... It doesn't anymore. The latest update of remote broke what was working so well. I can pull it up and see all 3 music sources, log into each and play music, no problem there. The problem is that when I want to log back into that device, it won't show what music is playing. It loads up to a trackpad... Why do I need a trackpad? the point of a wifi remote is that it interfaces directly with the library, not needing to see the display...  Annoying enough in itself as none of my devices are actually hooked up to a screen, but whatever, annoying point aside, I back out of the trackpad and refresh the device playing music... The music is playing, but won't show on my remote, I can't pause, press next song or anything. I have to start over and pick a song and override the currently playing song. Even the volume control is broken. I used to control each volume of each of the multiple devices individually, they each had a slider in the multiple speaker view, now there is only one master volume slider... One speaker is in my baby's room... If she is sleeping I don't want to have to go into the room to physically adjust that speaker, I want an individual slider like there was before.
    I used to be very happy with this app. I'm not anymore. I used to praise apple and promote the functionality of it to all of my friends. Now I'm just embarrassed when I can't control it when they are over. Embarrassed....
    As another fail.... I want to describe another point. As I have the iTunes server, it should be able to handle multiple things at once. It can to an extent... For example, I can play music from the server to an airplay device, and I can go onto my iMac, load up iTunes, click on shared libraries ad load my entire library from my server. I ca also at the same time take my iPhone, click on music, and again pull up my entire shared library of music from the wifi server... It handles this very well. I recently purchased an Apple TV 3. As it does not have a built in hard drive, it relies on content from a locally attached network or stuff from your iTunes account. So while I can use my iPhone to pull up the entire shared library while its also playing elsewhere, why can Apple TV 3 not?... It's using iOS just like my iPhone. All it was good for was airplay as an extra speaker. It wouldn't work as an extra rendered source of media using the shared library. Needless to say, that Apple TV went back to the store. Fail Apple, Fail.... That was the only reason I bought one. Maybe Apple TV 4 will actually be functional without a hard drive.

    Working fine on my system
    If on wifi, try ethernet
    Make sure router is up to date
    Reboot all components

  • I would like to have Internet Explorer on my 2008 iMAC, what and how is needed to install.  There is a  site I need to get to that will not work with Apple

    Would like to know what is needed to install Internet Explorer ion my iMAC ( 2008 on OSX 10.7.3)

    budeeymac wrote:
    Would like to know what is needed to install Internet Explorer ion my iMAC ( 2008 on OSX 10.7.3)
    Try Safari > Preferences > Advanced and down the botton tick Show Develop Menu In Menu Bar. Now you will see Develop in the top menu in Safari, click on it to open the drop down window, go to User Agent and select Internet Explorer and see if this allows you to open the page. Otherwise, as Deggie said, it's up to a Windows Install on your Mac through Bootcamp or Paralells or the like to run IE within Windows.
    Pete

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • My apple id will not work with ichat., my apple id will not work with ichat.

    My ichat will not work with my apple id. How can I make it work without changing my apple ID?

    the error message reads:
    your account has been disabled
    This Apple ID account has been disabled for security reasons. Tap Reset to reset your account
    I have reset my account  ID but it still does nit work on my IPAD.
    Does work on my IMAC and IPHONE

  • Apple remote contra not working with Lion

    I installed Lion and my littele apple remote control does not work anymore with my mac book pro.
    Is there any solution for that?
    Thanks

    It's not working for me either.
    I know that Lion doesn't include Front Row, but the remote is not working with any other application (ex. iTunes).
    Please somebody help us!

  • I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

    I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
    Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

  • Gmail suddenly not working with Apple Mail

    My gmail suddenly is not working with Apple Mail.
    It said my username or password is wrong, but it was okay this morning.
    Nevertheless, I deleted my gmail account, and re-setup it using Internet Accounts from System Preference.
    However, I got the beow message:
    There was a problem setting up the Mail account. An unknown error occurred.
    I am sure my username and password are correct because I just login it using Safari.
    Does anyone know what the cause is?
    Please help~~~

    Gmail not syncing in mac mail is a problem that is also in snow leopard since the new year.
    OSX 10.6.8  is the highest OS that will run on an Intel Core 2 Duo.  Do not try to install Mavericks on this machine! I will install, but turns it into a dinosaur and many programs will no longer run.
    I had an issue with Mac Mail not syncing with imap.gmail.com. and Safari not being able to find apple.com.
    This was resolved by working with an upper level tech support member for several hours deleating particular system library files, uninstalling most addons, reseting system network settings and a whole lot more! (too much to name here)
    Thank you Apple Tech Support.

  • Good Morning, Are there any other donotfollow plug-ins or add ons for the version 4 of Firefox? The one available on your site will not work with version 4. Thank you.

    I am starting to affiliate market and need a donotfollow plug in or add on and the one available on your site will not work with version 4 of Firefox. Is there another place I can go or do you have another add on that will perform the same function as the do not follow you have on your site for the previous versions of Firefox? Any help would be greatly appreciated.

    OK - to answer my own question, Apple recommend 8.2.1, but you can install 9.1.1 and it will run on a G3. Very slowly. Looks like this is the only option. Get it here: http://support.apple.com/kb/DL1036. You need OSX 10.4.11 or later though....

  • HT1619 my remote is not working with the new imac 27" :(

    my remote is not working with the new imac 27"    i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

    <http://store.apple.com/us/product/MC377LL/A/apple-remote>
    "Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
    There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
    <http://www.iospirit.com/products/remotebuddy/>

  • Why is Adobe Flashplayer not working with Apple? Do you have an other flash program you recommend?

    Why is Adobe Flashplayer not working with Apple? Do you have an other flash program you recommend?

    maj-brittfromsjöbo wrote:
    Thank you for your interest in Adobe Flash Player. Unfortunately Apple does not allow Flash Player to be installed on iPhone or iPad.
    May I add, this is the answer I get When I try to Download Adobe Flash Player
    You get the message because that is exactly the situation. Apple has not allowed any Flash on iOS devices.
    What site are you trying to see? Many sites now provide Flash alternatives. For example, if you want to listen to Pandora, instead of using the Flash on the Pandora website, instead you download the Pandora app for the iPad.
    In the future, even if Apple wants to add Flash to the iPad, it won't be able to because Adobe will no longer be making it at all, for any mobile device:
    http://www.wired.com/gadgetlab/2011/11/adobe-kills-mobile-flash/
    If you often go to sites that use a lot of Flash and they don't have an alternative, you should write to them and tell them to stop using Flash.

  • Time Machine will NOT work with Airport Disks!

    It looks like Time Machine will not work with Airport Disks after all. All references to Airport have been removed from the Time Machine page:
    http://www.apple.com/macosx/features/timemachine.html
    It also specifically says: "You can designate just about any HFS+ formatted FireWire or USB drive connected to a Mac as a Time Machine backup drive. Time Machine can also back up to another Mac running Leopard with Personal File Sharing, Leopard Server, or Xsan storage devices."
    Surely, they would have included the Airport Extreme Base Station in this list if it was supported.
    I really hope there will be another firmware update for the AEBS which will bring compatibility with Time Machine, because Time Machine was the only reason for me to buy an AEBS. (I only use it as a small backup server, I don't even have wireless networking enabled. There were other solutions, e.g. from Synology, which are faster and more reliable than AEBS disk sharing, but Synology stated their network drives would not be compatible with Time Machine.)

    Here's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
    1) Mount your AirDisk so it appears on your Mac
    2) Open Terminal.app
    3) change directories to the AirDisk's root folder located in "/Volumes"
    ie: cd "/Volumes/AirDisk Name"
    4) execute this command to "bless" the drive to be used with time machine:
    touch .com.apple.timemachine.supported
    5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
    This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
    Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious.

  • IPod will not work with docking stations

    My 5th gen iPod works fine except it will not work with docking stations. I can sync it with my computer and it plays fine, just won't work with docking stations and other accessories like the Belkin FM radio converter. I bought a iMode boom box and it does not work properly with my iPod.
    Any ideas??

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Also:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • My iPhoto will not work with Yosemite, and it says that it was purchased under a different account, but that's not the case.  Any ideas why I cannot update iPhoto?

    my iPhoto will not work with Yosemite, and it says that it was purchased under a different account, but that's not the case.  Any ideas why I cannot update iPhoto?

    How did you buy iPhoto? Did it come preinstalled on your computer with Lion or later, or did it come with Snowleopard on system installer disks?
    Which version of iPhoto?
    If you have a version of iPhoto '11 and it is showing on the Purchased tab of the App Store, with your Apple ID, then delete iPhoto from the Applications folder  (don't empty the Trash) and download iPhoto again from the Purchased tab.
    If that does not work, contact The App Store Support  from the Quick Links on the AppStore main page.
    Only apple Support can fix problems with apple ID.

Maybe you are looking for

  • Macbook Pro Retina Display hard crashes - not caused by Google Chrome

    Hi, all. This is my first time posting on these forums, and it is only due to the unsurpassed amount of frustration I have had with my mbpr. I received it in late August, and it worked great. Yes, I had the waking from sleep problem, but that got fix

  • How Oracle Installation cannot get fully qualified name of the server?

    Hi, I'm installing Oracle Internet Application Server (10.1.2) on Windows. The Win machine has fully qualified name as myserver.mydomain.com However, after the installation, Oracle shows that the URL to Internet Application Server is only http://myse

  • Queue blocked at the receiver side

    Gurus,     I have worked on one  scenario i.e  file to RFC.My sender is MDM and receiver is BW.Data is easily passing through PI but it's in scheduled status  at the BW side.For 500 records,its passing successfully and we can see the output at the BW

  • Open a PDF in Photoshop without extra Dialogs

    I am trying to open a PDF in Photoshop, convert to RGB, resize, and save as a jpeg. My problem starts with trying to open the PDF. I keep getting a dialog that request what color space, what size, how many bits . . .blah blah blah. I have gotton the

  • Backlight or inverter?

    I have a problem with my 20" Cinema display. it's the older model. About one third of the screen shows a dimmed light. could it be one of the lamps or is it an inverter problem? Is there a quick way to find out what the problem is? thank you Ngr