Remoting Error: Client.NotAllowed

Hello. I have a Flash as2 movie which uses remoting to
connect to a CF 7,0,2,142559 server. It works perfect in my dev
environment but it is throwing a strange error in my staging
environment (shown below). I have compared the dev server to the
test server and all of the settings appear to be the same (and
flash remoting is indeed turned on in the staging). I have checked
the whitelist and it is set to * on both (which should allow all).
Anyone have any ideas?
========================
Error_Holder.code: Client.NotAllowed
Error_Holder.level: error
Error_Holder.description: You are not allowed to access the
service texaer.axe_test_remoting.test_remoting. The service is not
in the configured whitelist.
Error_Holder.type:
Error_Holder.rootcause: undefined
Error_Holder.details:
==================================

Well, I tried all of that and I'm still getting the error message. I've also repaired disk permissions and run Disk Warrior. When I repaired disk permissions, many HP printer items showed up in the list.

Similar Messages

RD Gateway issue from Mac Remote Desktop client - 503 RPC Error: c0021012

I have an employee who is able to use the Mac Remote Desktop client to connect to her office PC via RD Gateway, but after a short time she consistently has her connection dropped with a
503 RPC Error: c0021012. I've researched this a little and apparently it refers to an expected shutdown condition (RPC_P_CONNECTION_SHUTDOWN) rather than a true RPC "exception". Also, the error almost always occurs exactly
10 minutes after the connection is established, so I'm wondering if a timeout is occurring due to a heartbeat/keepalive not getting through, the expiration of a token or credential, or something similar(?). Any help would be appreciated, here's a section
from the log that shows one of her drops:
[2014-Jun-22 23:58:44] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jun-22 23:58:44] RDP (0): client version: 8.0.24875
[2014-Jun-22 23:58:44] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-22 23:58:44] RDP (0): correlation id: 79b9ed3a-2198-784a-8805-0f1d292a0000
[2014-Jun-22 23:58:45] RDP (0): Resolved 'ourserver.oursite.com' to 'x.x.x.x' using NameResolveMethod_DNS(1)
[2014-Jun-22 23:58:45] RDP (0): Resolved 'ourserver.oursite.com'' to 'x.x.x.x' using NameResolveMethod_DNS(1)
[2014-Jun-22 23:59:50] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Jun-22 23:59:53] RDP (0): Exception caught: Exception in file '../../librdp/private/tlsendpoint_openssl.cpp' at line 116
    User Message : TLS1_ALERT_ACCESS_DENIED
[2014-Jun-22 23:59:53] RDP (0): Exception caught: Exception in file '../../librdp/private/tlsendpoint_openssl.cpp' at line 116
    User Message : TLS1_ALERT_ACCESS_DENIED
[2014-Jun-22 23:59:53] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-22 23:59:53] RDP (0): correlation id: 79b9ed3a-2198-784a-8805-0f1d292a0000
[2014-Jun-22 23:59:53] RDP (0): Resolved 'ourserver.oursite.com'' to 'x.x.x.x' using NameResolveMethod_DNS(1)
[2014-Jun-22 23:59:53] RDP (0): Resolved 'ourserver.oursite.com'' to 'x.x.x.x' using NameResolveMethod_DNS(1)
[2014-Jun-22 23:59:53] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Jun-22 23:59:53] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Jun-22 23:59:54] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Jun-22 23:59:55] RDP (0): Server supports RAIL
[2014-Jun-22 23:59:55] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Jun-23 00:10:54] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 217
    User Message : The gateway failed to connect with the message: 503 RPC Error: c0021012
[2014-Jun-23 00:10:54] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 217
    User Message : The gateway failed to connect with the message:
503 RPC Error: c0021012
[2014-Jun-23 00:10:54] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Jun-23 00:10:54] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-23 00:10:54] RDP (0): ------ END ACTIVE CONNECTION ------

Hi,
Is there any error occur on the RD Gateway server? Please make sure that RPC, RPC Locator and RPC Endpoint Mapper service are running on the server. Also, please make sure that the RD gateway
server does not reach the maximum number of connections.
Thanks.
Jeremy Wu
TechNet Community Support

HT201358 I am getting the unexpected error occurred of: The update "Remote Desktop Client Update" can't be installed. What to do? thanks!

Remote Desktop Client Update not able to install? Any workarounds to get it to install?
Thanks

do you know the exact verion of the remote desktop client update? Have you tried downloading the update manually from the apple website?
Have you tried a safeboot and then installing the update?

IOS Remote Desktop Client Logon Issue Prompts to Logon 3 Times with RDGW

I have an issue when connecting from the Remote Desktop client iOS on multiple iPads/users.
First a little background: We have an RDS Web Access / RDS Gateway (2012 R2) setup and properly configured. We can logon using it just fine from the Mac OS version of the app, Android version of the app, or from a Windows PC. When we try to
connect via the iOS app we get the prompt to logon 3 times. Due to security reasons, we do not want them to store their credentials on the iPads, which is the only method I have found to eliminate the triple password entry. It only prompts once on the Mac
OS version, Android version or from a Windows PC.
The password isn't being entered incorrectly and the servers are not registering any Audit Failures for the logon attempts. Can you assist?
Additionally I would like to recommend the addition of a feature to be able to setup remote resources but prompt for the password on app launch for security reasons. That way they would have to enter it once but then they could access any resources needed.
Thanks,
Nate L

I am not comfortable posting the entire log file but let me give you the high level summary. The settings section for the active connection:
[2014-Jun-17 12:45:23] RDP (0): Final rdp configuration used: {
    activeUsername = "domain\username";
    arcTimeout = 1800;
    configurationVersion = 8;
    console = 0;
    gatewayId = XXXXXXXX;
    host = "InternalServerHostName.domain.local";
    label = "";
    mouseMode = "-1";
    offsetX = 0;
    offsetY = 0;
    peerIp = "ExternalRDSGatewayIP";
    port = 3389;
    previousMouseMode = 1;
    previousUtilityBar = 0;
    screenshotScale = "0.125";
    soundMode = 1;
    swapMouseButtons = 0;
    type = rdp;
    utilityBar = "-1";
    zoomFactor = 1;
    connections =
        ...bunch of addresses...
    host = "ExternalRDSGatewayHostName";
    id = XXXXXX;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
It then attempts to connect to the InternalServerHostName.domain.local.
[2014-Jun-19 09:40:01] RDP (0): Resolved 'InternalServerHostName.domain.local' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-Jun-19 09:40:01] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-Jun-19 09:40:01] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-19 09:40:02] RDP (0): Showing credentials dialog
It then displays the same settings again with the exception of an additional line after the gatewayId line:
gwAutodetectState = kConnectionGwAutodectedForceGW;
Then it goes through the interface list, not using any proxy, correlation id, then resolves name:
[2014-Jun-19 09:40:10] RDP (0): Resolved 'ExternalRDSGatewayHostName' to 'ExternalRDSGatewayIP' using NameResolveMethod_Unknown(0)
[2014-Jun-19 09:40:11] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 217
    User Message : The gateway failed to connect with the message: 403 Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator.
[2014-Jun-19 09:40:11] RDP (0): Error message: The gateway failed to connect with the message: 403 Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator.
)(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-Jun-19 09:40:11] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Jun-19 09:40:11] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-19 09:40:11] RDP (0): Showing credentials dialog
Then it displays the same settings again except for the gwAutodetectState line changing to:
gwAutodetectState = kConnectionGwAutodectedHTTPSTried;
Then it connects ok. I went to our firewall (MS Forefront TMG) and monitored for traffic from the iPad iOS App (based on network it is on). I don't see the initial connection attempt at all, which is expected because according to the log above it looks
like it tries to connect to the host directly...which it shouldn't?
Then in the second attempt I see it trying to go to http://ExternalRDSGatewayHostName:443/remoteDesktopGateway/ which again it shouldn't be doing because that URL (the remoteDesktopGateway) is not part of the RDSGW or RDSWA 2012 R2 IIS
config or am I missing something? It should be going to Rpc or RDWeb right? or do I need to allow that path through too?
Thanks,
Nate

[Forum FAQ] "Unable to connect to the server by using Windows PowerShell Remoting" error while installing RDS roles on Server 2012 R2

When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
“Unable to connect to the server by using Windows PowerShell remoting”.
Figure 1: Unable to connect to the server by using Windows PowerShell remoting
First of all, we need to verify the configurations as it suggested:
1. The server must be available by using Windows PowerShell remotely.
2. The server must be joined to a domain.
3. The server must be running at least Windows Server 2012 R2.
4. The currently logged on user must be a member of the local Administrators group on the server.
5. Remote Desktop Services connections must be enabled by using Group Policy.
In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
Enable-PSRemoting -Force
Figure 2: Enable PowerShell Remoting
However, if issue persists, we need to check whether it has enough memory to work.
By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
the memory via the PowerShell command below:
Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
Then, you need to restart the server and the issue should be resolved.
You can get more information regarding Remote Troubleshooting by below link:
about_Remote_Troubleshooting
If you need further assistance, welcome to post your questions in the
RDS forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

i found another possible reason, this solution worked for me:
http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
I tried to set up powershell remoting on a server and kept getting this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
ot process the request. It cannot determine the content type of the HTTP response from the destination comput
er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
pic.
After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
many security groups or in my case because of the SidHistory attribute.
The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
If the keys does not exists you can create them, be sure to use the DWORD type.
I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved.

Using CopyIntoItems from Copy.asmx from a remote soap client

Hello,
I have been working on a soap client that runs on a remote client (not on the SharePoint server) and is platform-independent so that it cannot use the SP Object Model. I have managed to get most of the functionality working using SharePoint web-services except for CopyIntoItems.
My target server is a SharePoint 2007 server and I have a Document Library set up so I can upload files into it.
My soap request looks as follows.
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"> <soap:Body>
<CopyIntoItems xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<SourceUrl>http://null</SourceUrl>
<DestinationUrls>
<string>http://shpt.ad2010.local:35492/sites/targetsubsite/Test List/hello.txt</string>
</DestinationUrls>
<Fields>
<FieldInformation Type="Text" DisplayName="Test Column2" InternalName="Test_x0020_Column20" Id="{8c35c0ca-d578-47fd-b7f3-aed199141c86}" Value="Value 0" />
<FieldInformation Type="Text" DisplayName="Test Column3" InternalName="Test_x0020_Column30" Id="{6c0d3fe3-4f0d-4cff-997b-201747f83315}" Value="Value 1" />
</Fields>
<Stream>WW91IHNheSBoZWxsbywgSSBzYXkgZ29vZGJ5ZQ==
</Stream>
</CopyIntoItems>
</soap:Body>
</soap:Envelope>
The URL I am invoking this on is: http://shpt.ad2010.local:35492/sites/targetsubsite/_vti_bin/Copy.asmx
The response I get back is as follows:
<?xml version="1.0" ?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soap:Body>
<CopyIntoItemsResponse xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<CopyIntoItemsResult>
0
</CopyIntoItemsResult>
<Results>
<CopyResult DestinationUrl="http://shpt.ad2010.local:35492/sites/targetsubsite/Test List/hello.txt" ErrorCode="DestinationInvalid" ErrorMessage="The Copy web service method must be called on the same domain that contains the destination url."/>
</Results>
</CopyIntoItemsResponse>
</soap:Body>
</soap:Envelope>
I am unable to find any help on the error mentioned here. I have tried setting the source URL to something valid (I have to make it up because there really is no source URL as I copy from the remote client).
I wonder if I can even use the CopyIntoItems request (or the Copy web-service as a whole) from a remote soap client, and whether it was only meant to be used for copies between SharePoint Sites. Any clues are much appreciated.

I am trying to use the copy.asmx service to upload a file from a custom sharepoint form into a document library, and I can only use javascript with jquery. (no visual studio)
I have a similar soap envelope.
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"> <soap:Body>
<CopyIntoItems xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<SourceUrl>C://dir/file.txt</SourceUrl>
<DestinationUrls>
<string>http://[server]/sites/subsite/Demo List/sample.txt</string>
</DestinationUrls>
<Fields>
<FieldInformation Type="Text" DisplayName="Title" InternalName="Title" Id="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}" Value="Test Value" />
</Fields>
<Stream>base64Binary</Stream>
</CopyIntoItems>
</soap:Body>
</soap:Envelope>
I'm getting a 500 "internal server error" back.
Can anyone see what I'm doing wrong ?
Kris Blair

The Remote Desktop Client software is not active

Hello
I just downloaded ARD from the App store. I installed ARD Client 3.4 on the Client machines. Activated the machines in Sharing. All Users with everything checked except for "Show when being observed"
I am able to Observe, Control, Curtain and Lock.
I just tried to start a chat with a client and got the following error:
Unable to Chat with “WebVantage’s iMac”. The Remote Desktop Client software is not active.
I try to send a Message and get the following error:
This task will fail. This task is not supported on “WebVantage’s iMac”.
...with the choices Continue or Go Back
Try to run reports and it just seems to go on forever and says "Waiting for report data."
Many of the other choices won't work either, like Sleep, Wake, etc.
Am I missing something?
Thank you, in advance, for your time.
Cooch

WOW! It's been over a month and not one reply? First time this ever happened.
I am finding that I cannot lock the other Macs now. I get:
"This task will fail. This task is not supported on “XXXXX’s iMac”."
Anyone?
Message was edited by: J Cooch Lucchese

Cannot remote control clients in another domain

Hi,
I have successfully rolled out SCCM 2012 clients with SCEP to machines in our current domain but I now need to do the same to another domain (in a two way trusted forest/domain). I can install the clients without any issue (by adding the DNSSUFFIX argument
to the client push so it can find it's way home), and they are reporting back in successfully including inventories.
However I cannot remote control any of these clients from the console, I've added a domain admin account (from the trusted domain) as a viewer and I've added the Windows firewall exceptions in the agent details. I can get to these clients without any
issues, tracert is fine so I know the routing is good.
If I try and connect I get the generic "Cannot connect to computer" (after "initiating security handshake"), if I do it direct from the Remote Control client I can remote control the client after dismissing the warning "Remote computer
identity cannot be identified". But I understand that this uses NTLM rather than Kerberos.
What have I missed ? I had all this working in SCCM 2007 without any issues so pretty sure the underlying infrastructure is sound.
Any help gratefully received and thanks for taking the time to read this.
Brian.

Thanks everyone for taking the time to reply - I'll put this is the one reply it's easier !
@Jason
Interesting about the DNSSUFFIX thing, there are DNS forwarders back to the domain and it seems to find its way home. When I had SCCM 2007 I used the SMSSLP parameter for the client install, I can't do that in SCCM 2012 hence the DNSSUFFIX parameter.
CmRcViewer.log has been very helpful, I didn't know that one existed - I guess I have some kind of lookup issue going on ;
Address Lookup failed for the target host: WSUSTEST.
No such host is known. (Error: 80072AF9; Source: Windows) CmRcViewer 03/12/2014 11:40:52 13048 (0x32F8)
Address Lookup failed for the target host: WSUSTEST.
No such host is known. (Error: 80072AF9; Source: Windows) CmRcViewer 03/12/2014 11:40:52 13048 (0x32F8)
Failed to connect to remote system. This can be caused by several conditions: system is turned off, system cannot be reached, windows firewall blocks TCP Port 2701, or remote control feature is disabled. CmRcViewer 03/12/2014 11:40:53 13048 (0x32F8)
Sending 'Remote Control session failed to start' status message for session with remote system WSUSTEST CmRcViewer 03/12/2014 11:40:55 13048 (0x32F8)
@NolanC
The issue is from the console - I can connect via FQDN or IP but get the warning "The Remote computer identity cannot be verified".
@Joyce
See the extract above, thanks for pointing me towards this log. I can confirm that the correct Firewall exceptions are in place and the membership of the ConfigMgr Remote Control Users reflects the permitted viewers in the client settings.
Just seeing if I can resolve the lookup issue, DNS seems to fine ! Unless I've missed something in SCCM.

Routing Issue for Remote Access Clients over Site to Site VPN tunnels

I have a customer that told me that Cisco has an issue when a customer has a topology of let's say 3 sites that have site to site tunnels built and a Remote Access client connects to site A and needs resources at Site B but the PIX won't route to that site. Has this been fixed in the ASA?

Patrick, that was indeed true for a long time.
But now it is fixed in PIX and ASA version 7.x.
Please refer to this document for details:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

Regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections (any ideas???)

regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you

Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.

Hi,
You didnt mention which version of IWS. follow these steps.
(1)Goto Web Server Administration Server, select the server you want to manage.
(2)Select Preference >> Perfomance Tuning.
(3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
(4) Apply changes and restart the server.
*Setting the timeout to a lower value, however, may prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before the connection is closed is 432000 bits (2400 multiplied by 180)
Regards
T.Raghulan
[email protected]

Office 2013 - RemoteApp & Remote Desktop Client

When launching Office products from the Remote Desktop Client with Remote Resources / RemoteApp in OSX Mavericks. e.g. Office Word 2013 it is extremely slow and unresponsive. It opens to fill the screen but not full screen, cropping above the dock and below
the MAC toolbar. This is not apparent in Windows Surface Pro / RT / 7 / 8, Android, iPad / iPhone iOS
If I restore down the Window it seems to remove a white outer bar and then works as intended, even if I manually click and drag more or less to the same size of the maximised window. I believe this may be due to the Office 2013 shadow. In GPO I have:
- Added a registry to DisableAnimation
-Enabled 'Disable Office Animations' in the Office 2013 ADMX
-Enabled 'Do not use hardware graphics acceleration' in ADMX
Before:
https://heathsideschool-my.sharepoint.com/personal/bmoore_heathside_surrey_sch_uk/_layouts/15/guestaccess.aspx?guestaccesstoken=zfEfs30OKP8jaTL5vAjZBnFqPefGBcD4nNUqZHs3JAs%3d&docid=05b1d2a4c002e4152844656608eef7a9d
After:
https://heathsideschool-my.sharepoint.com/personal/bmoore_heathside_surrey_sch_uk/_layouts/15/guestaccess.aspx?guestaccesstoken=9aUKxic763dU7n2z3vxSDBkbXhyDo%2fo3P0jrEh08gtw%3d&docid=092297a567b51448e98ea674e3fab97f6
I am running:
OSX Mavericks
Mac Retina
Server 2012 R2
Kind regards,
Bobby Moore

Hi Bobby,
Let us start with opening Word in its application safe mode. Follow these steps to do so:
Hit Windows key on the keyboard, and start typing
winword /safe in search bar and hit Enter.
If the application works fine safe mode, try disabling the add-ins for the application and check the result:
Click the File tab.
Go to Options.
click Add-ins.
Select or clear the options that you want.
unchecked the add in like send to Bluetooth and something regarding office one not.
Let us know if you need further assistance .

What is new in Remote Desktop Client Update 3.8.2 v1.1?

What is new in Remote Desktop Client Update 3.8.2 v1.1? Also, how can we tell if clients are on 3.8.2 v1.1 and not 3.8.2 from ARD? Apple isn't providing us with detailed information so I am reaching out to the community.
THanks,
Andrew

Yeah, it tells you nothing which is why I posted. Here is what they link you to: About Remote Desktop Admin 3.8 - Apple Support
No details

Remote desktop client software not active

I'm sorry if this has been asked before but I'm a bit bewildered by this errormessage (and I couldn't get a hit when I searched for it) when I try to drag a file from the xserv to the macbook pro desktop, remote desktop client software not active.
The macbook has the ard server and connects to the xserv ppc. It connects over the internet.
The xserv is behind a iptables fw and I have forwarded 3283 tcp/udp plus 5900 udp/tcp to the server. Have I forgotten a port ?
I've read through http://www.starkpr.com/ard.htm as well as http://www.macosxhints.com/article.php?story=20070302234400232&query=vnc%2Bsimpl e%2Bset%2Bup
and tried to find out more from the discsussions here.
The macbook pro sits behind an airport which is hooked into the dsl modem. Do I need to configure port forward in the airport as well.
Connecting to the xserv and working on it works great but the copy file transfer fails.

Hi there I took new try at this and this is what finally solved it for me.
The earlier answer I got was very good advise but I had already done that bit, actually I might have overdone it a bit I had checked all the boxes under the useraccount on sharing.
Back to business.
Firewalling. I realised I need to open and portforward at both locations and remeber it's booth tcp and udp.
So at the xserve location I needed to forward 3283 and 5900 both tcp and udp from outside to the IPnumber of the xserve.
At home with my macbook I needed to do the same.
However this did not solve it, I had forgotten one software on the macbook. On the xserve I had installed ARD upgraded it to 3.1 AND installed the upgrade for ARD 3.1 client. The client part I had forgotten at home. So once my ARD and ARD client software matched I could connect to the xserve and drag and drop files booth ways.
ARD wasn't running on the xserve I just had it installed along with the client software.
So portforwarding in firewalls and the same software and versions in all locations seems to have solved it for me.
A small note enabling/disabling the firewall in macbookpro did nothing for me since when enabled ARD rules were in place and active so it still worked.
I hope I made some sense.
Message was edited by: tindome
Message was edited by: tindome

Remote Desktop Client Update 3.8.2 v.11 remains in Software Update queue but, is listed (several times) under "Updates Installed in Last 30 Days.

Remote Desktop Client Update 3.8.2 v.11 remains in Software Update queue but, is listed (several times) under "Updates Installed in Last 30 Days". This is also the case with HP Printer Software update 3.0 and Digital Camera RAW Compatibility Update 6.03. Clicking the "update" button for these doesn't appear to install the software, but lists it in the "Updates Installed in Last 30 Days" without removing it from the Software Update queue.

Thank you. I tried that and even gave it a few days to do its thing, but I still get the same results. Remote Desktop, HP Printer, Digital Camera all still appear in "Available Updates", but the same versions appear under "Updates Installed in the Last 30 Days". BTW, I had to manually install the Safari 8.0.4 update because it also wasn't updating.

Remoting Error: Client.NotAllowed

Similar Messages

Maybe you are looking for