Removal of auto reservation being created

Hello Team
Please help me to remove all reservation creation for production orders created for open sales order items.
The materials (stock) unnecessarily reserved against the production orders and here we issue material depending on actual consumption, so no need to reserve material for the orders.
I have a doubt, if I exclude/remove the tick mark include reservation from the checking rule in OPJJ, will it resolve the isssue?
Please help.

Hi,
1) Should I configure both OPJJ and OPL8, or just one of them?
Not necessary. Both are optional solution
2) If I configure OPL8 (as NEVER), is it expected that no reservation create after that?
3) As you mentioned u201CYou cannot restrict the creation of the order reservationu201D in your reply, then what will
happened after configure either OPJJ or OPL8 or both?
Again as i said earlier you can not restrict the creation of order reservsation. But here in this case it works differemty. For instance if you set from release for reservation relavence in opl8 then
Reservation will created at the time of order creation but you can not find it in md04. means it will not influence mrp and atp check.
Once you release the order, reservation reflects in md04.
Regards,
Dhaval

Similar Messages

Auto Save folder not being created with new project

Just recently I've noticed that when I start a new project there is no auto save folder being created. I have all preferences the same (auto save every 10 min with a max of 50 and save next to project files). I have no idea why this started or what I can do to fix it.

So it seems to be working now. I went back through other projects that have been open for some time and the most recent auto save file I could find for any of them was from Oct. 8th. So auto save hasn't been working at all. What I did was go into preferences and change the interval a little and the frequency from where I had had it since intial set up. That seemed to have told it to turn it back on for some reason. It's really weird. I guess I'll just keep an eye on it, but people may want to check there folders just in case the same issue is happening. I didn't realize it until today and it's been happening for a couple of weeks apparently.

Excise Invoice being created before standard Invoice is created

Hi
I create a sales order. With reference to the sales order I create a delivery.
With reference to the delivery, in VF02, if I try to create an Invoice, I get the following message - Excise Invoice created for the Invoice 597500041.
I need the standard invoice to be created first and using the Tcode Ji11n I should create the Excise Invoice.
But instead I get the above message.
What settings should I check and correct.

Dear Vaideeson Marap...
As per my understanding of your question
If excise invoice is being created automatically the movement you create the commercial invoice in (vf01) ,you need to remove the check box in "excise invoice during billing " respective excise group.
Please check and revert
Thanks&Regards
Raghu.k

.DS_Store files on USB thumbdrives - a way to stop them from being created?

Hello!
Forgive me if this has been asked to death, but at school I need to copy homework files back and forth to the school's XP-based computers constantly. Because in any given day I usually update half a dozen files across the "homework" folder on my Powerbook, it's easier just to copy the entire folder (and its subfolders) to my 2-GB, FAT-32 formatted flash drive each night - all 500 files (and 150 MB). Of course, this also leaves hundreds of .DS_Store and ._filename files to clutter "Windows explorer" windows.
My question is how do I remove (and prevent creation of) these files selectively? I know that they are used by the finder to store thumbnails, spotlight comments, and labels. The big problem is that while I want to remove these files from the homework folder (and some other folders), I DO NOT want to remove them from a few other folders on the flash drive - which I use to make quick backups of files from my Mac.
I know that I can prevent OS X from creating them altogether with certain utilities, and I know that I can get third-party utilities that allow me to remove these files from flash drive and/or prevent the creation of the files for entire volumes, but is there something I can do to remove them from only certain folders?
Also, since I do not always know beforehand what directories I might make, I'd like to be able to create a "white list" of only certain directories (and their sub-directories)that won't be touched, while all others will have their ".DS_Store" and "._filename" files removed.
Finally, because I'm often a hurry when I go to copy files, I'd rather not sit there and run terminal commands or a program every time I copy a folder over to the flash drive. Is there some way to prevent them from being created in these certain folders altogether, automatically? An applescript or terminal command that I can program to run from the script menu perhaps? I don't mind opening a program or script, I just don't want to have to sit there manually removing the files.
Thanks,
-Dan

I had a similar problem awhile back and asked for help in the Applescript forum:
http://discussions.apple.com/thread.jspa?threadID=954738&tstart=0
Unfortunately the revised jive software formatting function here in the forums has totally messed up things like posted scripts. What you'll see in the scripts discussed is no longer what was there originally. I just now put a copy of the script I'm using up in zip format here:
http://homepage.mac.com/francines/.Public/CopyStrip2Fat.zip
Unzip and open in Script Editor to get some idea of what it is really supposed to be. The idiot formatting of the revised jive software has replaced some things with a carriage return, a semi-colon, and close quote, thus rendering some lines meaningless.
To see the source of the script I quoted, see this MacOSXHints thread:
http://www.macosxhints.com/article.php?story=20040726164957299
The script is in the comment by cougar718. You might take a look at other comments as well.
Francine
Francine
Schwieder

Mysterious files being created in pages. Unable to unlock or delete them.

Mysterious files being created in pages. Unable to unlock or delete.

It turns out that you cannot update or delete a Syndication Map that is currently assigned to a Port in the Repository. You must remove the map from the Port in the Repository and then you can change and/or delete them.
1) bring up the MDM Console
2) Unload the repository
3) drill into Admin ~ Port
4) Remove or change the map associated to the port
5) Load the repository
6) Then you go into Syndicator and either Update the Map or Delete it
It had nothing to do with security.
Thank you for your help.

Inbox folders not being created from msf files

Last week, I noticed that my Inbox folder files weren't appearing in my profile. I posted a generalized question here: https://support.mozilla.org/en-US/questions/996903
The response I received didn't help that much. The folder I created appeared on the remote mailbox as empty folders.
My mail account is synced via IMAP to a remote Zimbra mail client using STARTTLS. I can view my Inbox. The other folders in my Inbox account are not visible. I can send and recieve messages from my INBOX.
When I select "Manage folder Subscriptions" In the account options, I can see the folders. When I select them, and click the "Subscribe" button, nothing happens.
Inspecting my IMAP directory, I see the following structure:
~/.thunderbird/13zr0oo0.default/ImapMail/mail.<zimbra_account>.com:
-rw-r--r-- 1 matthewe matthewe 1238 May 2 10:38 Archives.msf
-rw-r--r-- 1 matthewe matthewe 1235 May 2 10:38 Drafts.msf
-rw------- 1 matthewe matthewe 47500385 May 2 09:56 INBOX
-rw-r--r-- 1 matthewe matthewe 375885 May 2 10:36 INBOX.msf
-rw-r--r-- 1 matthewe matthewe 25 May 2 08:58 msgFilterRules.dat
-rw-r--r-- 1 matthewe matthewe 1233 May 2 10:38 Sent.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 10:38 site-errors.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 09:59 Templates.msf
-rw-r--r-- 1 matthewe matthewe 2275 May 2 10:33 Trash.msf
The msf files are created when I click the "Subscribe" button but subsequent Mail files containing the mail data are not (note that non-msf files exist only for "INBOX".)
Removing .msf files and restarting Thunderbird has no affect.
When I launch, the errors console reports the following three errors:
"Could not read chrome manifest 'file:///usr/lib/thunderbird/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D/chrome.manifest'.
-- There is no chrome.manifest file in my filesystem under /usr/lib/thunderbird/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}"
"While creating services from category 'profile-after-change', could not create service for entry 'Disk Space Watcher Service', contract ID '@mozilla.org/toolkit/disk-space-watcher;1'"
This is reported as https://bugzilla.mozilla.org/show_bug.cgi?id=883621 and has been resolved at https://bugzilla.mozilla.org/show_bug.cgi?id=895964 but my system still throws the error. (I have plenty of disk space. Permissions perhaps?)
[JavaScript Warning: "Calendar https://mail.zimbrahostedemail.com/home/matthewe@<zimbra_client>.com/Calendar has a dangling E-Mail identity configured."]
I'm not sure what that means.
I am using Thunderbird 24.5.0 on Ubuntu 13.10

Is your question about files not being created, or because you cannot send and receive mail, or both?

NImax.exe has generated errors. You must restart the program, a log file is being created.

NImax.exe has generated errors. You must restart the program, a log file is
being created.
This error occurs just after bootup, no programs started except windows..
Running Windows 2000 latest version on a brand new computer.
(pent 4 3.0 ghz 500MB ram).
Can anyone help me with this problem? Happened after install Labview 7.0
express. Installed twice and same problem occured with both installs.
Labview 7.0 is the only thing installed right now. Also selected "Visual
Basic Support" install from driver cd's.
One other thing I just noticed. System info reports 2 processors and I
think I only have one.
TIA

Happy update.
After ignoring this problem for awhile and installing some NI DAQ boards,
this problem is not happening anymore.
Would urge NI to investigate further though. Messed me up for a couple of
days, and still don't know why it happened.
Much thanks to those who helped.
JJ
"JJF" wrote in message
news:qB6Hb.48702$VB2.90660@attbi_s51...
> One other point, I found out this is a message generated by drwtsn32. Can
> get rid of the error by unchecking "show visual feedback on errors" box,
but
> don't like that fix. Still need help.
>
> Thanks,
>
> JJ
>
> "JJF" wrote in message
> news:%JRGb.138921$8y1.419649@attbi_s52...
> > Hi Nirmal and all,
> >
> > Happy Holidays to you too, and thanks for the reply.
> >
> > Making progress. Did all the uninstalling and registry editing as you
> > suggested. Also, updated Win2K at Microsoft.com as suggested.
> > Re-installed with default settings of LV express 7.0. Now I only get
> the
> > error when I exit NImax.
> >
> > Also, my p2p home network is not that hot. Have it set up as a
workgroup.
> > Sometimes when I boot up I have file access between the two computers
and
> > sometimes windows explorer can't find the workgroup network path
(between
> > the two computers). Both computers can always access the internet
though.
> > Using a 4 port Linksys cable/dsl router on a cable modem. Using XP
home
> > edition on base computer (the one set up for the isp) and Win2K on the
> other
> > computer.
> >
> > Also, any idea where this log file is going? Thought it was part of the
> > event viewer but the errors in the event viewer don't seem to correspond
> to
> > the NImax.exe logging event now. There is a file in
> > "winnt\sytem32\config\software.log" that seems to change at about the
same
> > time but I can't access the file because it is in use by the system.
> >
> > Using NImax ver 3.02.3005. Do you know if I can download "NI
measurement
> > and automation explorer" and/or the driver cd's from NI.com? Maybe I
have
> a
> > flaky disk or something. I have a feeling it may also have to do with
the
> > "on again/off again" network neighborhood connection problem.
> >
> >
> > Thanks again,
> >
> > JJ
> >
> >
> >
> > "Nirmal Sharma" wrote in message
> > news:506500000005000000AE470100-1068850981000@exchange.ni.com...
> > > Hi,
> > > Happy cristmas & new year for you & ur brand new pc...
> > >
> > > How are you uninstalling & then installing LV in your pc ?
> > >
> > > I suggest to remove complete LV (Remove All option) from your
> > > computer. Once uninstallation is completed, go to windows registry -
> > > by windows start -> run -> regedit -> Enter
> > >
> > > Goto HKEY_LOCAL_MACHINE-> SOFTWARE -> National Instruments - Delete
> > > this folder (National Instruments folder)
> > >
> > > Remove any other foloder/file related to NI's software. Be very
> > > cautious while deleting files from windows registry bcoz wrong file
> > > deletion may hang your whole system.
> > >
> > > Restart your computer..hope it should bootup without any errors.
> > >
> > > Now as answered by Alexander, update windows.
> > >
> > > After updating, bootup your system. If it boots up without any error
> > > message, install LV with the typical (default installation).
> > >
> > > Hope this helps. Your feedbacks are welcome.
> > >
> > > Best Regards,
> > > Nirmal Sharma
> > > India
> >
> >
>
>

Delivery details aren't being created

Hi folks.
For some lines from some orders, the records in the WSH_DELIVERY_DETAILS aren't being created. There isn't any error in workflow.
What can be?
Is there any workaround? Can I create the record with a script or process or api?
Tks

This could be because of the item types on some of your order lines rather than because of a glitch in the workflow. For stocked items, the delivery detail is created when you schedule the line (usually synchronous with booking). For, e.g., assemble to order, you won't get a delivery detail created until you create supply for your line - i.e. after you have progressed from status 'Supply Eligible' to create either a production order or a purchase req; or until you have reserved your line to existing stock on hand.
Anything else should be followed up as an SR with Oracle Support rather than via writing your own API or script updates!
Regards,
Jon

Bdc session in status being created

Hi..
I have a custom program that creates bdc sessions. For some of the sessions it created, the status of the session is being created.
when i click on analysis of that session: it has
1 transaction with 8 screens in new
1 transaction with 8 screens in to process
1 transaction with 8 screens in current content
1 transaction with 8 screens in removed with - ve sign after 1 and 8.
0 transaction with 0 screens in (created, deleted, processed and incorrect)
Can someone tell me what might be the reason for the session to be in being created?
Appreciate your help and will reward helpful answers.
Thanks,
RK

Yes. As I said before thsi is because the BDC_CLOSE was not executed. You are seeign them as being created could be because soem was was tryign to debug the program and woudl have jumped out of the program half way. In this case the BDC_CLOSE would not have executed and the session will remain as 'Being created'. You dont have to worry abt it and it is purely because of partial execution of the program. You can try it on yoru own by gettign into the debugging mode and terminate the program after BDC_OPEN FM is executed. You will see another session with status beign created. The number of transaction in this session will depend on what point did you terminate the program.
- Guru
Reward points for helpful answers

Bug? Design-Notes are still being created (checkbox unchecked)

Hey there,
i've got an issue when using DW (CS6).
Although i've unchecked the design-notes option und used the delete old _notes-button (that at least worked outstandingly ;- ) ) "_notes"-folder are still being created in my project.
Is this a well known issue under some circumstances?

It's a handy feature to keep even if you're not in a team environment. You could still do with the notes, but not upload them remotely.
If you're in a team, this is critical to maintain sync.
Unchecking design-notes will not stop creating these folders. If you're keen on still doing this, follow these steps:
Go to "Manage Sites" in the site dropdown list
Select the site you want to remove _notes folders from
Click "Edit"
Click "Advanced"
Click "Remote Info" in the Category list
Uncheck "Maintain Synchronization Information"
Click "Design Notes" in the Category list
Uncheck "Maintain Design Notes"
That will disable creation of _notes folders for your site.
If you want to delete all _notes folders for your site after you've chosen to stop creating new ones, click "Clean Up" button once.

How to remove an auto generated ActionPreformed Event from Netbeans?

Hi,
How do I remove an auto generated ActionPreformed Event from my code? I accidentally created one and want to remove it. I tried to right click on the event and refactor/delete all the dependencies in the source but it wouldn't let me remove it. There shouldn't be any DEPENDENCIES it was just created.
Thanks,
V$H3r

NetBeans | Help | Help Contents | Java Applications | Building Java GUIs | Designing Java GUIs | Managing Component Events | Removing Event Handlers:
1. In the Inspector window, select the component whose event handler you want to remove.
2. Click the Events button at the top of the Properties window.
3. Select the event in the property sheet and click the ellipsis (...) button to display the Handlers dialog box. Alternately, you can simply delete the name of the handler you want to remove in the Properties window.
4. In the Handlers dialog box, select the handler to remove from the list and click Remove.
When you remove an event handler, the corresponding code block is also deleted. If more than one handler uses the same name and same block of code, deleting a single reference to the code does not delete the code itself. Only deleting all references will delete the corresponding code block, and a confirmation dialog box is displayed first.

Did a Clean Install of Lion and I see "librarians" logs being created in Console

I have "librariand" logs like these being created excessively every 2-3 minutes. Does anyone know why ? ?
What is "librarians" for ? Where is the error ?
The logs looks like this:
Process:         librariand [1188]
Path:            /usr/libexec/librariand
Identifier:      librariand
Version:         ??? (???)
Code Type:       X86-64 (Native)
Parent Process: launchd [154]
Date/Time:       2011-08-15 17:37:16.697 -0400
OS Version:      Mac OS X 10.7 (11A511)
Report Version: 9
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/Ubiquity.framework/Versions/A/Ubiquity
Referenced from: /usr/libexec/librariand
Reason: image not found
Binary Images:
       0x10d60b000 -        0x10d614fff librariand (??? - ???) <0FE2CEEA-611E-3407-AC6E-2ADD0712E195> /usr/libexec/librariand
       0x10d621000 -        0x10d62fff7 com.apple.AOSAccounts (1.0 - 1.0.20) <E9099EA0-613F-36A5-BA18-57A977BEEAEF> /System/Library/PrivateFrameworks/AOSAccounts.framework/Versions/A/AOSAccounts
    0x7fff6d20b000 -     0x7fff6d23fac7 dyld (195.5 - ???) <4A6E2B28-C7A2-3528-ADB7-4076B9836041> /usr/lib/dyld
    0x7fff951ad000 -     0x7fff954bffff com.apple.Foundation (6.7 - 833.1) <618D7923-3519-3C53-9CBD-CF3C7130CB32> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x7fff98520000 -     0x7fff987f7fff com.apple.security (7.0 - 55010) <2418B583-D3BD-3BC5-8B07-8289C8A5B43B> /System/Library/Frameworks/Security.framework/Versions/A/Security
11-08-15 5:40:59.527 PM ReportCrash: Saved crash report for librariand[1254] version ??? (???) to /Users/stamatgeo/Library/Logs/DiagnosticReports/librariand_2011-08-15-174056_Ge orges-MacBook.crash
11-08-15 5:40:59.840 PM ReportCrash: Removing excessive log: /Users/stamatgeo/Library/Logs/DiagnosticReports/librariand_2011-08-15-173717_Ge orges-MacBook.crash

Good luck finding anything on this. librariand is new to Lion, and there is no man page for it, nor any general info around the internet. It is soooooo annnoying..
searched the developer site...
No results were found for librariand. Please try a different search.
NOT what I would call "proper" documentation.
i get this kind of crap ALL DAY long..
8/19/11 11:27:24.821 PM librariand: error in handle_item_info_request: NSCocoaErrorDomain/260/Request for item properties on non-existent item.
8/19/11 11:27:24.823 PM librariand: client connection is invalid: Connection invalid
8/19/11 11:27:24.823 PM librariand: no clients - starting idle timer
8/19/11 11:32:27.812 PM librariand: new client - cancelling idle timeout

Accounts being created with administrative group rights

Hello,
The server is a Windows 2003 R2 Enterprise fully patched used for Shared Hosting purposes. It runs Hsphere control panel. I am trying to identify how the following hack is happening.
1) There are users being created with Administrative group rights.   Below is the EventViewer log for the user creation:
User Account Created:
    New Account Name:    username
    New Domain:    PCNAME
    New Account ID:    PCNAME\username
    Caller User Name:    PCNAME$
    Caller Domain:    DOMAINNAME
    Caller Logon ID:   (0x0,0x3E7)
    Privileges       -
Attributes:
    Sam Account Name:    username
    Display Name:   <value not set>
    User Principal Name:   -
    Home Directory:   <value not set>
    Home Drive:   <value not set>
    Script Path:   <value not set>
    Profile Path:   <value not set>
    User Workstations:   <value not set>
    Password Last Set:   <never>
    Account Expires:   <never>
    Primary Group ID:   513
    AllowedToDelegateTo:   -
    Old UAC Value:   0x2DAB2B0
    New UAC Value:   0x2DAB2B0
    User Account Control:   -
    User Parameters:   <value not set>
    Sid History:   -
    Logon Hours:   <value changed, but not displayed>
There exists entries as well where the primary group ID is changed to the Administrative group, but I am omitting such.
2) I tried to identify what Caller Logon ID:   (0x0,0x3E7) means. I found out from here:
http://blog.joeware.net/2013/01/14/2667/ that I can use LogonSessions.exe to identify it.
Output from LogonSessions.exe is pasted below (snippet):
[0] Logon session 00000000:000003e7:
    User name:    DOMAINNAME\PCNAME$
    Auth package: NTLM
    Logon type:   (none)
    Session:      0
    Sid:          S-1-5-18
    Logon time:   9/11/2014 12:41:53 PM
    Logon server:
    DNS Domain:
    UPN:
        4: System
      316: smss.exe
      364: csrss.exe
      392: winlogon.exe
      440: services.exe
      452: lsass.exe
      628: svchost.exe
      756: LMAgent.exe
      840: svchost.exe
     1000: spoolsv.exe
     1252: avagent.exe
     1268: camWMIAgent.exe
     1324: cissesrv.exe
     1380: cpqrcmc.exe
     1404: vcagent.exe
     1440: svchost.exe
     1480: HsQuotas.exe
     1740: inetinfo.exe
     1780: EmailAgent.exe
     1856: snmp.exe
     1884: sysdown.exe
     1920: smhstart.exe
     2192: svchost.exe
     2388: cmd.exe
     2396: hpsmhd.exe
     2444: cqmgserv.exe
     2464: cqmgstor.exe
     2484: HSphere.exe
     2596: wmiprvse.exe
     2676: cmd.exe
     2684: rotatelogs.exe
     2692: cmd.exe
     2700: rotatelogs.exe
     2732: searchindexer.exe
     2812: hpsmhd.exe
     2824: cqmghost.exe
     2852: svchost.exe
     3044: cmd.exe
     3052: rotatelogs.exe
     3080: cmd.exe
     3088: rotatelogs.exe
     5452: svchost.exe
     5596: GravitixService.exe
     7392: csrss.exe
     7232: winlogon.exe
     6888: csrss.exe
     9832: winlogon.exe
    10388: wawrapper.exe
    10352: cpqnimgt.exe
     9496: msiexec.exe
     6068: w3wp.exe
     4748: webalizer.exe
3) I also learned from http://support.microsoft.com/kb/243330/en-us that Sid:          S-1-5-18 means:
SID: S-1-5-18
Name: Local System
Description: A service account that is used by the operating system
That is all great info, but I am not sure I can put together what I have learned to attempt and get closer towards identifying how in the world users are being created and then being assigned administrative group rights.
I am a Linux person mostly, but I am comfortable following a properly explained thread regarding windows 2003 R2 Enterprise issues.
The server is fully patched and it is running Lumension security product. What's more, Norman Malware tracker, tdskiller.exe (Kaspersky) and McAfee rootkitremover.exe have been run without any apparent Malware/Virus infection
Hope someone with advanced admin skills can advise.
Thank you

Hi,
You mentioned that, “I am trying to identify how the following hack is happening”, would you please tell us that why did you think the event represent a hacking behavior?
In a Shared Server Hosting environment, the underlying hosting control panel tool (Hsphere in this case) should be creating only virtual FTP users with a specific group. So no users with Administrative group should be ever created. If this happens,
it constitutes a breach of server security=positive hacking attempt.
>how in the world users are being created and then being assigned administrative group rights.
In addition, would you please be more specific about this question? Did you find the event message on a domain joined machine?
I want to be able to understand in full how/what process is allowing users to be created with Admin rights. In other words, I want to know what IP was used to issue the command, if ASP.net was used (abused in this case), or anything else related to
it so that we can patch this particular hole.
Best Regards,
Amy

While creating a Sales Order , service order is being created

1) VA02 --> given some number for order (71009759 valid sales order for service )
2) trying to create a material ( say SERVICE K in my case and qty 1)
3) now i press save button
4) now i go to IW32 a new service order is being created there.
where should i check for the user exist created which is making the service order to be created automatically
Plz help required....
Regards
venkat sharma
Edited by: venkat sharma gaddala on Mar 26, 2009 8:38 PM

Hi,
Userexit's for IW32
Exit Name           Description
IWO10012            Maintenance order: Priority handling on central header
[Find BADIs for a Transaction   |Re: BADIs for a Transaction]

Library Backups No Longer Being Created in 10.1.2

No matter what I do, Library Backups are no longer being created in 10.1.2. This is happening on all 6 of my production Mac Pros and iMacs. I can change the location of the Library Backup folder, but nothing is ever created in the new location. It's as if FCPX no longer knows how to backup libraries.
Some background...
We are working with Libraries and Media files on our XSAN Volume.
OSX 10.9.3
FCPX 10.1.2
We did not notice the Backups were not being performed until one of our Libraries had an issue and we could not find a single Backup of the library.
What I have tried...
Move Libraries to Local System Volume - Still No Backups.
Change Library Backup Location - Still No Backups.
Toggle Library Backup Location to No Backups and then Back to Backups - Still No Backups.
Ensure Proper Permissions on Library Backup Folder - Still No Backups.
Trash FCPX Preferences - Still No Backups.
ReInstall FCPX - Still No Backups.
I am at a loss at what to do next. I can't even see the backup process happening in console, or any errors that might give me a clue as to why it's not working. Short of trying to reinstall Mac OS on one of my production macs, I see no other alternative. Considering I'm having this issue across our entire production system, I'm wondering if this is a very serious FCPX 10.1.2 bug.
Is anyone else having these issues????

Tom Wolsky wrote:
Definitely not working as advertised. I made a new library. Imported some stuff. Futzed around. No backup. Waited more than an hour. Made a new project and always immediately a backup appeared.
I've had pretty much the same results trying to sort out what is going on since the 10.1.2 update regards Library Backups.
I'm getting no backups with newly created Libraries like others, tried all sorts of juggling acts in the new settings arrangement trying to find a way in.
What I have so far discovered is that Libraries are not created until a Duplicate Project is created of the original Project for the Library, then it appears to do as expected.
Seems like a bug.
Hope other users can confirm this.
Al

Removal of auto reservation being created

Similar Messages

Maybe you are looking for