Removal of bg color in header

I'm using DW 8 and would like to remove the brown from the background of my header.
I would like to just have the picture of the header there.
How do I do this?
I do not want the brown to show at all in the header just the picture.
http://wimsarmstrongfamily.org/Newpg.htm

Hello Akaya00,
In Dsign view select the div with id "header" and then from the CSS panel remove the background-color property or change it to the main color of your page.
Regards,
M.Zografski.
DMXzone.com

Similar Messages

How to I remove the 'panel' underneath the Header list, and above the mail Preview pane. Contains 'from' 'subject' 'reply' buttons to name a few. Takes up too much space.

How do I remove the 'panel' underneath the Header list, and above the email Preview Pane. Contains 'from', 'subject', 'to', 'reply', 'forward' buttons to name a few. Takes up space.
== This happened ==
Every time Firefox opened

setSize (600, 200);orpack ();Kind regards,
  Levi
PS:
    int i;
parses to
int i;
, but
[code]    int i;[code[i]]
parses to
    int i;

Color to header materail field in BOM report

hi experts,
I am doing BOM report in that header material of BOM and their component i moved in same field but
i cant identity which one is a header material (MAST-MATNR) and which one is a componental (STPO-IDNRK) so, I want to color for header material.
Plz send me reply earliest.
Thanks,
Jyotsna

Hi,
As you can make out the header material for BOM, so for a header material you will be having number of component materials.
Then can check whenever a header material is encountered and can use colors in classical reports.
Hope this helps you.
Regards,
Tarun

Remove XI-part of SOAP Header in Axis Adapter

Hi folks!
We are running a PI 7.11 and use the SOAP Axis Sender Adapter in a synchronous SOAP Web Service scenario. Our challenge is that in our response we definitely need a SOAP Header tag, but it should be empty like this <soapenv:Header/> or this <soapenv:Header></soapenv:Header>
We tried to achieve this with the Axis Handler com.sap.aii.axis.soap.HeaderRemovalHandler. But regardless of the parameters we provide to this handler it always removes the complete SOAP Header. On sample is to remove the PI-specific Main header tag from SOAP Header:
name.1=Main
namespace.1=http://sap.com/xi/XI/Message/30
We also tried it only with namespace. But always the same sh... happens: The SOAP Header is removed completely.
Any ideas?
Thanx very much in advance!
Regards,
Volker

Hi Stefan!
Thanx for your reply. We found that Axis handler mentionedby me in SAP Note 1039369 "FAQ XI Axis Adapter" .
But please tell me how to parameterize the java:com.sap.aii.axis.xi.XI30InboundHandler to ensure that the XI part of SOAP header is removed, but not the complete SOAP header.
Thanx in advance!
Regards,
Volker

Applying color to Heading of a page in ALV reports

Hi Experts,
I want to apply color to heading of a page in ALV reports ,if any one knows please help me.
Regards,
Satya.

Is that what you mean?
DATA it_sflight TYPE TABLE OF sflight.
SELECT * FROM sflight INTO TABLE it_sflight UP TO 10 ROWS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program          = sy-repid
    i_callback_html_top_of_page = 'TOP_OF_PAGE'
    i_structure_name            = 'SFLIGHT'
TABLES
    t_outtab                    = it_sflight
EXCEPTIONS
    program_error               = 1
    OTHERS                      = 2.
FORM top_of_page USING document TYPE REF TO cl_dd_document.
DATA lo_table_area TYPE REF TO cl_dd_table_area.
CALL METHOD document->add_text
    EXPORTING
      text         = 'Some text'
      sap_emphasis = cl_dd_area=>heading
      sap_color    = cl_dd_area=>list_negative.
CALL METHOD document->add_table
    EXPORTING
      no_of_columns               = 2
      cell_background_transparent = space
    IMPORTING
      tablearea                   = lo_table_area.
CALL METHOD lo_table_area->add_text
    EXPORTING
      text      = 'Some text2'
      sap_color = cl_dd_area=>list_key.
CALL METHOD lo_table_area->add_text
    EXPORTING
      text      = 'Some text3'
      sap_color = cl_dd_area=>list_background.
CALL METHOD lo_table_area->new_row.
ENDFORM.
If not, please let us know which part of ALV you exactly want to color.
Regards
Marcin

Removing customization link from portlet header.

Hi,
Could u suggest me out of the 2 ways to remove customization link from portlet header.I am using the default stock prices portlet in my page.
Where and how should i change the provider.xml file.
If not this how can I setShowEdit(False) which is one of the methods in MutablePortlet interface.How can i find this code related to Stock portlet.I mean where can we have access this code where the provider API's are used for some of the readymade portlets that oracle provides.
I am using release 1 of oracle portal.
Thanx
Vipul

Hi,
I see two things that you could try :
first try to set the security level at the portlet level, then allow users to display your portlet, not to customize it. I know it's possible with tabs, maybe it can apply to you.
Else you also can modify the package of your portlet (or the provider.xml file if it's not the package). You should read the pl/sql code and find the variable concerning the customization link in the rendering part. It may be set to 'tru', just set it to 'false' and recompile.
I've done it when installing some portlets and it works : that way I could translate the portlet in franch, remove the help link, remove the detail link, and so on...
Hope this helps,
Gael.

How to remove tags (not color tags)

How to remove tags (not color tags)
I love the idea of the tags, however there comes a point when some become irrelevant. How can I remove them. I highlighting them in the dialogue box and hitting the delete key, that does not work. ?

I accidentally found that you can remove some tags while in the Sidebar view by just draggng them to the trash.
But after a certain point when you have drug all of tags in the list, you are then left with the "All Tags" button. When you click on that final button, you find that all of the tags you have ever created are still there in the All Tags category. So I guess what I do is just not create any new tags because the list just becomes too long to be useable. I liked the idea of Tags as a management tool, but like so many times before I will just go back to the file name workarounds that I have been using since 1988. They work because they were developed and tested by an actual user, me. Just toss a project number into the file name. Works every time, unlike the undocumented "features" that are apparently not tested.
But, if what I hear is true that Apple does not monitor these discussions, what was the point of writing this.
Would like to think they would look at these "discussions" as a resource, but.......

Need to bypass "Remove and check color cartridge" error message

I have an old HP printer giving me the error message "Remove and check color cartridge." I remove it, it's good, I put it back, same message. I try leaving it out, I get an error message asking me to install a color ink cartridge.
I DON'T EVEN WANT TO PRINT WITH THIS PRINTER. I have a new HP printer connected to my wireless network that I use for all my printing. I am using the old printer for its scanning capabilities in my crafting area. I am JUST wanting to scan old pictures to an external hard drive for storage, so that I don't have thousands of print photos sitting around in boxes and files.
Please help.

I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message. Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could. Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch.
I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

How do I fix error message remove and check color cartridge?

I have a PSC 2355xi all in one printer. I recently tried to replace the ink cartridges. Error code...Remove and replace color cartridge shows in the printer window. Now the printer will not work at all and I haven't found the fix. HP "Customer Support" has been NO HELP AT ALL!

Hello Kimosabe
If you have not already please try this article it may help with your problem.
Remove and Check Cartrdige Error
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

HP PSC 1600 All-In-One error message remove and replace color cartridge

I get the remove and replace color cartridge and printer or scanner won't work. I have replaced the cartridge with new ones twice and it still happens. Just installed a new HP color cartridge and no luck. I've tried everything I can think of.
Please, does anyone have any other suggestions????
Thank you,
Mary Jean Kelso

Hi MJKEL,
Welcome to the HP Forums.
I see that you are having an issue with errors on the printer pertaining the ink cartridges.
I do have a few steps that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a documet that deals with A 'Remove and Check [color / black / photo] Cartridge' Error Message Displays on the Printer Control...
Please feel free to write me back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

1600 all-in-one series printer error message to remove and check color cartridge will not go away

Error message, remove and check color cartridge will not go away even after replacing cartridge (same refilled). Any help would be appreciated.

I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message. Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could. Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch.
I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

Re: the printer says remove and check color cartridge.

How do I fix this problem ... the printer says remove and check color cartridge. I have done this many times. No change it still says the same thing.

Please read this post then provide some details. What printer model? What operating system? Is the cartridge an HP or a third party?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Photosmart 2575 cartridge error "Remove and check color cartridge"

I have one of the above all in ones, which has given excellent service until recently. The last 2 colour cartridges (Both were original HP) have been acting up. When the cartridges were first installed all was well but as the ink levels fell to about half, I started getting a "Remove and check color cartridge" warning. I followed the instructions and cleaned the contacts on the printer and the cartridge and the problem seemed to be cured. The some time when I turned the printer on, the message re-appeared. Again, cleaning seemed to redress the problem. As the ink level fell further, the warning appeared more regularly, until at about one quarter, the problem could not be solved. I fitted a new cartridge and all was well again until that too had the self same problem. Now that has reached one quarter and the problem will not go away. As far as I can see, the contacts on both the cartridge and the printer are perfectly clean, the cartridge sits fair and square in it's position and there is no apparent damage to any part of the setup.
Any assistance you can provide to resolve this problem would be gratefully appreciated.

Followed this proceedure with both cartridges. When they were about half full this would solve the problem temporarily but it returned. As they got down to around quarter full this would not make any difference. Have now fitted a new cartridge and the printer is working as it should. Will have to throw away another quarter full cartridge by the looks of things. I will see how this one performs. Thanks for your help.

Probable effects of removing Sold-to from invoice header?

hi
we have a requirement of doing collective billing by Payer and for that we need to remove Sold-to partner details from invoice header to avoid billing split.
We are achieving this by using copy control routine to suppress Sold-to from delivery and (ii) removing Sold-to from header partner procedure of billing type to avoid prevent split due to different Sold-to in preceding documents. (and maintain Sold-to at invoice item level)
Removing Sold-to from header partner procedure was required as otherwise the split indicator UNGLEICH=X was set and we could not find any user exit to set UNGLEICH = space in program LV60AB14 ( SAP ver 4.7 ).
While we are trying to assess the effects of removing Sold-to from invoice header, I would lile to know opinion of others about probable effects of doing such; if anybody has done same thing in past, please help.
thanks in advance

Hi,
As such removing sold to from invoice header will not pose any risk to the process. It is very much possible to have an invoice without SP. You can very well do this and go ahead.
However you can test this by deleting the SP at header level while creating an invoice document on collective basis, and making the payment for the customer. The only place where I have little doubt is about the "Receivables from the customer(sold to party):" in FBL5N. Here we may have some problems in updating the open items in Receivables and updating the payments. So please do the configuration and test this until payment to find out any errors. Along with this, also run a test on Credit Mngt. If there are no implications in Credit Mngt, and Payments in FI, you are safe to continue this as a process.
The much simpler way to ensure SP not to be considered for invoice split will be to create a invoice split routine and code in such a way that SP is not a factor for splitting the invoices.
So evaluate both of them of their advantage and risk and then decide.

HP 1610v error message: Remove and check color cartridge

In the middle of printing, my HP 1610v All-In-One PSC just stopped and displayed an error message reading "remove and check color cartridge". I did.... but couldn't really determine what I'm supposed to be looking for though. Ink cartridge is full, clean, and seems fine. Not only can I not figure out what I'm supposed to do to fix it....I can't do ANYTHING. no printer menu access, no printing with only the black cartridge, only an orange exclamation point that ceaselessly blinks at me.
I've tried unplugging and waiting 20 seconds
I've put 3 different color cartridges in and the error message only went away with the EMPTY cartridge...which, of course, I couldn't print with!
Please Help ASAP!!
Thanks!

Hi there iceefrost,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Removal of bg color in header

Similar Messages

Maybe you are looking for