Removal of waste material from factory.

Dear All,
I have the following scenario, A material x is generated from my manufacturing process, which is excisable.
But for dispatching of this material from my factory premises, I have to pay the  Customer / Vendor  money ( Credit Memo) according to the dispatch quantity.
How do I map this scenario,
Any valuable answers will be given the maximum points.
Deepak

hi deepak
The scenario you mentioned is elaborated below :
A product X is manufatcured by me.
I buy raw material for manufacturing product X from my vendor/supplier.
Based on the quantity of X  I manufacture and dispatch , I pay the supplier for the consumed stock quantity .
See if this is the process then isn't it similar to consignmnt process?
Supplier ===> Consignment fill up of raw materials at my end. suppose 100 nos
Me ===> Pick up the material and then the supplier does a consignement issue.
Ie Raise an invoice for the quanity picked up by me.
I pick up 50 for production
Now once i manufacture the product using 50 nos
of raw material.
Do either i can raise a credit memo  for the supplier or pay him .
But you want to raise a credit memo for the same.
Let the accruals for this credit be tracked in the system.
hope this helps
Reward wil suitable points if useful
regards

Similar Messages

  • Removal of waste material from factory premises

    Dear All,
    I have the following scenario, I use a ( material x)  for my manufactring process, From this material a waste is generated during the manufacturing process            ( material Y).
    Now I want to remove this material from my factory premises, that is I will be paying a vendor per ton basis to remove this material from the factory premises, and also I have to pay excise duty to government against the dispatch of this material.
    How to map this scenario in the system.
    Valuable answers will be rewarded maximum points.
    Deepak.

    Is it possible to copy 161 and create a PO somewhat like return PO and you can maitain in the condition the money pay to vendor and the money pay to goverment? and it also related to material evaluation and you can pay the money throught IR.
    I'm not sure whether it make any sense.

  • How to remove the Holiday calender from factory Calender

    Hi All Good Morning,
    I want to remove the Holiday calendar from Factory calendar,
    I know the two ways to remove
    1.Through request remove the Holiday calendar at DEV system, then move to production system.
    Is there any impact on other calendar related settings If we move the request from DEV--> PROD System.
    (My doubt is only changed settings will change or any other settings also get impact)
    2.Directly change the settings through client open.
    In this option we are able get the change option in Factory calendar at DEV and QAS systems but we are not able to get change option at PROD system.
    Can any body help on this,which is the better way.
    Regards,
    Murali.

    Hi,
    Many a times the holiday calendars are not in sync with DEV,QAS & PRD System,first check your system and see if they are in sync,
    1-if they are in sync do changes in DEV and push request to PRD
    2-if they are not in sync better do it on PRD Client,with help of your basis person,however before doing this kindly apprise your client of the same and then with his permission do it.
    if HC are not in sync it may so happen that whatever is in DEV may get overwritten in QAS & PRD,hence check as suggested above and then do changes.
    First remove(delete) HC from factory calendar and save
    Salil

  • Selling the cotton waste / plastics waste material from the factory.

    We have a waste material laying in the factory like cotton waste/Plastic materials.
    Thing is that cotton waste is procured as consumable material thru po-- GI is also done for it (hence not in stock )  & now after its use,it become waste.
    I want to sale this as a scrap to vendor.
    For selling it thru SD-module -Sales order, it required to be in stock as needed by SD module requirement.
    Can you please guide me ,how to take it into account as stock so that it will fulfill the requirement of SD module as its already being issued against cost center (201 mvt type)
    Please guide.

    Dear Laxmipathi,
    1.Cotton waste material is received via 101 wrt PO & Issued to cost center via 201 & consumed.
    2. Now as its waste we need to sell. This is simple requirement. FI point of waste sale is revenue. but we stuck at place that how will I create the sales order for selling it when the stock is not in inventory. As a consultant, I don't think the suggestion of asking the Client to perform the reversal thru 202 when the material is actually consumed for the intended use & its illogical should then.
    There should have some logical way to map scrap, once the material is become waste after its use & not  the 202 reversal of GI (which is like material is not/never used & now your scrapping it via sales order!!!).
    If we use 202 reversal then what will the impact on the reports -showing all these times GI is reversed!!! which is clearly misreading from the report analysis.

  • Product Allocation: Removing a Material from Product Allocation

    Hey folks! 
    I am new to the forums, so hopefully some of you sharks will bite on this one.  I work for a consumer products company and we're having issues with product allocations.
    We have had a material on product allocation for the past 3 months.  We used a allocation rule that is modeled off of the S140 rule on the basic data of the material view.  However, our production has now ramped up sufficiently to produce this product and provide normally. 
    1) How do we remove the material from product allocation?
    We deleted the rule from the basic data view, but is there anything else we need to do?  There are many remaining open sales orders that get the error "No Feature Combination exists for this selection error".  I have ran rescheduling (V_V2) and have also ran the SDRQCR21 to rebuild requirements, but it still remains with this error.
    2) Is there something we have to do with the infostructures?  Something we have to do in MC64 or MC94? 
    3) Do we need to go through each sales order and delete the line item and replace the line item to get the normal ATP to function (we would rather not do this as we have EDI information connected to each line item)
    4) Is there another report out there I need to run that I just do not know about?
    Any help would be great.  We are on ECC5.0 Hotpack 15.  I will reward points if I can figure out how to.

    Use MC94 to remove the quantities allocated.
    Use MC62 to remove the planning hierarchy.
    I believe that in your situation MC94 will work.

  • How to remove sr. no. profile from material master

    Dear all,
    I have maintained serial no. profile-Q001 in plant data/stor.2.
    But now I want to remove serial no. profile from material master.
    but it showing message serial no. already assign to this material.
    Pls suggest
    Thanks
    Shabbir.Kureshi

    Dear Thyagarajan,
    I have got the solution.
    Thanks a lot.
    Thanks & Regards
    Shabbir Kureshi

  • How to Remove batch mangement indicator from Material Master

    Hi
    I am trying to remove batch mangement indicator from Material master..but system does not allow
    Before this .. I have done all activities also ...clear open SD documnets ,deliveriy documents ,PO documents ,Process order teco and . reservations and activae deletion flag in  batch  ... and made current period  stock an previous period  stock zero... i have cleard all documnets ...still system does not allow remove indicator..could you please guide in this issue ..how to remove batch indicator.
    Regards
    Sasi

    Hi,
    Please refer the below links.
    Re: untick Batch Manegement Indicator on Material Master
    Remove batch management flag and deletion of material documents
    How to remove Batch Management in the Material
    Re: How to remove Batch Management Check in the Material
    Thanks.

  • Removing Material from Batch Management

    Currently have one material number that the batch indictor has been
    turned on in material master view. There have been documents created,
    which were backed out. No inventory in previous period and the batch
    record has the delete indicator on. Trying to remove the batch indicator
    from the material master view and receiving error msg that batch exists.
    What would be the process to remove batch indicator?

    Hi Dzimitry,
    kindly go thru following thread
    https://forums.sdn.sap.com/click.jspa?searchID=5533088&messageID=3699950
    thanks
    suresh

  • Remove material from search results

    Is anyone aware of a way to remove a material from search results?  I have a large contingent of materials that are no longer valid for sale and the search results create a lot of clutter.   I need to retain the records for historical sales transactions but since there is no stock and the materials are discontinued, they don't need to be displayed on search.

    Hi Craig,
    You can do this through customising: SPRO > Logistics - General > Material Master >  Tools > Maintain Search Helps
    There, give double clicl to the "Search Help" = MAT1_A.
    Then, select the tab "Include search helps" and select the search where you want to add a field. i.e. MAT1V - Material by Supply Area.
    Once you are there, check if you can add the field LVORM - DF at client level.
    Then, save the data and in this search you can have the option to see all the materials deleted or not deleted.
    By the way, Narla Rama Krishna Mohan has a document about "Material Master Search Help" and it can help you too.
    This is the link:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8047f84e-7973-2c10-548a-ab4cb1c3c498?quicklink=index&overridelayout=true
    Hope this help.
    Kind regards,
    SP

  • Reset phone to factory settings to remove unwanted email addresses from autofilling.  Now trying to only sync real contacts, photos, and apps from backup.  HELP PLEASE!  :)

    Reset phone to factory settings to remove unwanted email addresses from autofilling.  Now trying to only sync real contacts, photos, and apps from backup.  HELP PLEASE! 

    All of this should be on your computer as you should be syncing regularly to your computer.. Just sync it back.
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • Re assignment of material from inspection plan group

    Dear Experts,
    I have an issue, we got a material which has multiple groups assigned to it.
    How to remove the materials assignment from the inspection plan group?
    Since the group contains more than 1000 line items, it is very laborious to search every line item and delete manually.
    Is there any 1 shot way to remove the assignment?
    Please help me out in this, because of multiple assignment, the lot gets into the status of CRTD.
    Thanks in advance,
    Anitha Pauline.

    hi,
    Use CWBQM.
    Regards

  • For turn in purpose how do i remove all my info from my phone

    for turn in purpose how do i remove all my info from my phone

    Since you posted your question on the iPhone forum, I'm assuming you have an iPhone.
    In that case, go to Settings...General...Reset, and select Erase all content and Settings.
    This will remove all of your content and restore the iphone to factory settings.
    I have done this myself before selling iphones.

  • Removing the Statistical Price from VA05

    Is there a way that you can remove the statistical pricing from the VA05 report?  I need to have the statistical pricing so I can not remove that from the item category.  However, we use the VA05 report for looking at item level material to still be shipped and also dollar expected value on the line items.  This is causing a discrepancy due to the statistical value shows up.  I have searched the forum and also google...but to no avail.  We are using ECC6.  Your direction is greatly appreciated.

    There is a user exit available for VA05, wich can be used to add another column and show whatever information is needed in it. You might want to also review the pricing configuration and see if the statistical conditions need to be excluded from the totals/subtotals. Also you could set it up so that the number needed is put into one of the subtotal fields. This would facilitate reporting, printing in forms, etc.

  • How do i remove the adking tracker from my phone

    How do I remove the adking tracker from my iphone5?

    There is no known malware capable of infecting an iPhone, unless it has been jailbroken (ie, hacked to allow apps from outside the App Store). If you have jailbroken it, you need to restore it to factory settings immediately to remove the jailbreak, then don't jailbreak it again.
    Assuming you didn't jailbreak it, it's definitely not a virus. Where are you seeing these ads, and under what conditions? What makes you believe that it is running constantly and draining the battery?

  • How do i remove the restriction code from my iphone 4s? i forgot it

    How do i remove the restriction code from my IPHONE 4S? I have forgotten what it is. PLEASE HELP!!!

    If you lose or forget a restriction passcode, you will need to perform a factory restore to remove it.
    That is what it says here http://support.apple.com/kb/ht4213
    Message was edited by: Ocean20

Maybe you are looking for