Remove a pdf from public folder?

When I use share a document facility from acrobat.com to email a pdf it says my file is put in a public folder. Is this permanent? Can I remove it? How do I do that?

Can you describe how you're sharing your document within Acrobat.com? Your mention of a 'public folder' is a little confusing to us.
Typically, the way to make a document public or private is simply to select which option you want on the Share File dialog.

Similar Messages

  • User not able to save e-mails from public folder

    Hi,
    I have a email user with a complain that she is not able to save some e-mails from public folder, nor their attachments, nor to forward them to her own inbox. This happen not for all emails but randomly for some emails in her public folder.
    She can open and read but got following  error message , while trying to save the attachment of the email
    "Cannot save the attachment. You do not have sufficient permission to perform this operation on this object. See the folder contact or your system administrator"
    The following error occurred  when she trying to forward the email.
    "Cannot open this item. You do not have sufficient permission to perform this operation on the object. See the folder contact or your system administrator"
    I have tried to grant "Edit All"  in the write permission area, later tried with "owner permission" too but still having the same errors.
    I found out in some occasion when the email is read only then it cannot be forwarded, copy or print the contents.
    I see emails in the public folder appeared with "Read only" but most of them can be saved and forward, only few appear with errors for the user. I did checked the emails "Restrict permission" setting and that display
    with "No restriction".
    How can I get rid of the errors and allow the user to save the attachment and also save the email in different location of the public folder.
    Thanks
    Selvem

    Hi,
    Please check if you can move these affected messages to Inbox folder.
    And please check if the issue persists in OWA.
    Does this issue affect only one user?
    If this issue only affects one user, you can recreate Outlook profile to check result.
    Best regards,
    Belinda Ma
    TechNet Community Support

  • Remove a link from a folder

    Hello
    I am trying to remove a link from a folder. I am using the COLLECTION_DELETE_ITEM service with the following parameters:
    contenedorDatos.putLocal (IdcService "," COLLECTION_DELETE_ITEM");
    contenedorDatos.putLocal (dCollectionID "Folder_ID")
    contenedorDatos.putLocal (hasCollectionID ", "true");
    contenedorDatos.putLocal (dDocName, "Doc_ID")
    The problem is that it removes the link and the original document, I want to delete only the link. How I can remove the link?
    Regards

    Better yet!
    </a></font><Font color=white>(Your Portlet Header here)
    The above one would work with IE as well as Netscape.
    If you just give </a> , in netscape you won't be able to see the header properly
    cheers,
    Ranjit

  • Need powershell commands to get email addresses from public folder created in EAC to CSV

    Need powershell commands to get email addresses from public folder created in EAC to CSV
    1. Created Public folders via EAC - not mail enabled - just to hold contacts.
    2. Assigned owners and showed to add new contacts - then add to favorites and finally to display as address book.
    Now I need a powershell command to get those email contacts in those public folders.
    I need to view them because when we send emails to those groups (via select all) in the public folders, it is creating an NDR for 3 users saying - "..blah blah -OFFICE FAX or HOME FAX) - yet they are getting the emails.
    I suspect that their contact details are corrupt somehow and want to see what contacts are actually listed in the public folders. I already checked to see if the source of the contacts was the public folder or "my contacts" and they are not.'
    I have tried multiple get recipient commands and get public folder commands with no results in the CSV

    The only way to get that data is either via the Outlook com object or using EWS. None of the commands in the Exchange shell look inside of a folder, the most you can get with those is email addresses for mail-enabled Public folders. Here is a link that can
    get you started with how to connect to public folders via EWS, then its just enumerating the folders and looping through the items in the folders for the details of the items. 
    http://gsexdev.blogspot.com/2013/08/public-folder-ews-how-to-rollup-part-1.html
    DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

  • How do you remove a playlist from a folder?

    Is there a way you can remove a playlist from a folder in iTunes? how do you do so? The playlists I want to remove are regular blue playlists, they're not the "smart" playlists. Please help
    iBook G4   Mac OS X (10.4.4)  

    Hi, Carina, welcome to Apple's user-to-user discussion forums.
    Grab the playlist you want to remove from the folder and push it all the way to the left. It should then move from the folder back to the list of playlists. Works for me.

  • How can I clean out the recently bookmarked entries without removing the bookmarks from the folder in the library?

    When I click the star to bookmark a site it goes into the recently bookmarked area of the library. I then drag or cut or copy and past it into a folder I already have in the bookmark library, but it doesn't disappear from the recently bookmarked. If I delete it from the recent, it also gets deleted from the folder in the library.
    What can I do to keep it in the folder but remove it from recently bookmarked?

    No, currently there is not a way to do this.

  • Mail Sender Adapter - read from public folder.

    Hello Experts.
    I have a scenario, where I need to read an incoming mail from a public folder, and after mapping the attachment (which is a csv) I need to put the result as a file in a shared folder.
    right now the problem is, I am not sure how to access the public folder.
    should I use one of the exchange users, and try to access the public folder?
    what should I be writing in the URL parameter in the mail sender adapter ? (imap://server/???/public folder ?)
    Also - in case I will want to switch the location of the mail to a private foler inside of the user mailbox - what is the URL parameter in that case?
    Anyone ever did something like this and can help?
    Thanks,
    Imanuel Rahamim.

    Hi Imanuel,
    do u mean u want to pick the mail which contains an attachement from a specified folder instead of inbox?
    u can configure the URL like imap://host:port/path/PublicFolder.
    after PI received the mail. we can use PayloadSwapBean to get the attachement payload and do following message mapping.
    ur question: Also - in case I will want to switch the location of the mail to a private foler inside of the user mailbox - what is the URL parameter in that case?
    do u mean u want to pick the mail from a specified mail account? if like this, create an user for the interface only. then configure the UserName/Password in the channel.
    Regards,
    Kevin Song

  • Fscommand() to open a pdf from cd folder...

    hi,
    need to open a pdf thats inside a cd:
    but this doesn't work!?
    on (release)
    fscommand("exec", "DOWNLOADS\Elefante.pdf");
    the DOWNLOAD folder is on the CD root

    IndioDoido wrote:
    > hi,
    > need to open a pdf thats inside a cd:
    > but this doesn't work!?
    > on (release)
    > {
    > fscommand("exec", "DOWNLOADS\Elefante.pdf");
    > }
    > the DOWNLOAD folder is on the CD root
    Wish it was that easy :) First of all, FS command CAN'T refer
    to any folder so
    the DOWNLOADS concept is out.
    All the content has to be store in FSCOMMAND folder, it's
    flash security feature.
    Secondly, that action does not open anything except
    executable file.
    That's where the name comes from "EXEC", so you can only use
    exe, com, bat etc...
    You could use BAT file to open pdf but it will prompt the
    ugly DOS window even tho
    if you set the ECHOE off, something we can't control, pity
    because bat is a easy
    solution but not so neat if you make commercial work.
    Clean solutions are available only with 3rd party tools.
    For many years I have been using Flash Jester tool call
    JStart. Works like charm
    all the way, no extra pop up DOS windows.
    http://flashjester.com/?section=tricks_jtools_jstart
    JStart will allow you to not only launch a program, but use
    parameters to make the
    program open files, perform special actions and just about
    anything you can use
    parameters for. You can also choose to launch files with
    their default associated
    program.
    Another solution is provided by Rick Turoczy, it's pretty old
    but it should still
    work. Perhaps give it a try.
    http://www.flashgeek.com/tutorials/07_launchapp_01.asp
    Easy to use tool that allow you to launch basically anything
    from the projector.
    As long as there is system default application supporting
    particle file.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Remove "old" PDFs from iTunes: iBook Duplicates

    Hi everyone,
    I did my researcher and tinkered with it, but I can't find out how to fix this. I guess now PDFs sync through iTunes from iBooks to iOS devices. Well, I had several PDFs from the pre-Mavericks era in iTunes ("iTunes Media" >"Books" folder).
    Well I imported my PDFs into iBooks so that I could start adding new and managing them, but now all my devices have duplicates showing in iTunes (in the books tab when I select a device) and it tries to sync the old and new. I deleted the Books folder from iTunes Media, but it still attempts to sync those books and I get an error "can find file" when I sync, but most annoying of all is that on the books tab there is duplicates of all the PDFs that [I]were[I] in the old "books" folder and now in iBooks.
    How can I get iTunes to delete and "forget" the old PDFs without restoring my device?

    Hey Jac151,
    I also had the same problem...and heres the only solution I found. Take a look at this website: http://thetechgears.com/how-to-completely-reset-itunes-11-playlist-and-library-a nd-start-fresh/
    It will reset your itunes library, and you will have to scan for media files to import all your stuff again (songs & movies). For mobile apps, your need to go to icloud to download them again. Its a huge long process, but it was the only way that would reset the way it viewed my pdfs in iBooks. Good luck!

  • Removed some files from library folder

    moved files from library folder and attempted to put them back after experiencing major changes and problem. This is not correcting the situation what can be done to restore it back to what it was before I started?

    Hi Ali,
    Update, I did a verify permissions with disk utility and some stuff is where it should be now, (recovered iphoto yeah) but still a problem with other things as before.
    So to answer your questions,
    What is the exact path to this folder? And please post the contents of the folder.
    I get to her old itunes by the following path;
    home>music>itunes>itunes music - this folder contains folder icons of all her old itunes library, each artist has a folder, such as amy cook>list of albums>list of songs - if selected will than open itunes and will import to new itunes library.
    I don't quite understand the heirarchy you are describing. Please post the contents of her Home folder.
    Her home folder contains
    Desktop
    Documents
    Library
    Movies
    Music
    Pictures
    plus 9 folders she had created over the past four years these are intact and accessible to proper application programs (ie documents open in appleworks, pictures are from the pictures library not iphoto, 3rd party software such as genealogy programs are intact and up to date)
    "I find some old unchanged items such as itunes, imovie, email mailbox items, in a folder that she created before the change took place in her user
    account."
    What is the exact path to this folder?
    As for this folder some things were moved back to proper places with the above mentioned verify permissions, some like, mailbox items, I was able to import to current settings to restore to how it use to be. From what I gather she created this file when things were going wrong and she feared messing the whole thing up. I access this by the following path;
    home>library>(then the folder she created) Library do not touch.
    When I compare the main library file to my account main library file they do not contain the same items in fact many of the missing items seem to be in this folder that she created. I assume the ones I need are in this file she created but I am really hesitant to just start moving things around out of fear of creating more problems on her side or messing up my side.
    If you have sufficient available disk space, you shouldn't have any problem, but you need a reliable backup, just in case.
    In regards to archive/install - sufficient available disk space meaning as much or more than what I am currently using? How do I check this to be sure?
    Which brings me to a whole new question if you have time?
    We do have an external back up system, which we used before a semi-recent move, (I plan on finding the box it is packed in believe me), however we attempted to use imacs backup program to do a quicker backup, were able to back up her side onto disks, but when I attempted to do the same on my side I received an failure error screen something about a drained buffer and being unable to perform a backup. Please tell me I have not fried my dvd drive!!!
    Thanks again, hope I answered in a way that is helpful to you.
    need to know

  • Help! I need to create a PDF from a folder of jpg and tiff images.

    This would be from a known CD folder so I could pass the name to the program. The resulting PDF, with the same name as the folder, should be put it in a books folder under Documents.
    I would like to initiate this action by clicking on a link on a local HTML page.
    Just knowing if this is best done in Automator, AppleScript, or bash (or whatever) would help.
    For some background: So I have 20 CDs with several dozen folders in each, full of images nicely ordered. Right now I preview them and Save As..PDF. Works fine but it is tedious.
    I have a list of the CD Labels, and the existing folders inside them.  I also have a handy HTML page in my Documents with the links to all the (future) PDFs ready to go.
    Having a program that would just go through a whole CD and make PDFs of the same name as the different folders would be great too.
    Any advice?

    Maybe PDFtk will help?

  • Open PDF from a folder of changing files

    My client wants to give CDRoms to people but he wants to be
    able to put different PDF files on each one.
    I can open a PDF with no problem, what I can't do is get
    Director to recognise a folder of PDF files that is ever changing,
    and be able to open individual PDF's with a click.
    I want to be able to say to my client "put your PDF's in the
    DOCUMENTS folder, then put all files onto a CD, simple as that".
    How can I do it?

    you can get the content of a folder with
    - pure lingo using getNthFileNameInFolder()
    - fileXtra4 using fx_FolderToList()
    - buddyAPI using baFolderList()
    hth
    Ned

  • Error linking to a PDF from HTMLResources folder

    I am trying to make a button that will open up a pdf. I have set up my HTMLResources folder with the pdf, created the HTMLResources.zip and when I click the button I keep getting the error: "The requested URL was not found on this server." (-1100). Help!

    If I don't compress the HTMLResources folder (that contains the files) it won't let me upload it. I get a dialog in the builder panel that says the the folder must be named HTMLResources.zip.
    Obviously there is something I'm misunderstanding.
    I have a folder called HTMLResources that contains one PDF that I'm trying to upload.
    If I compress only the PDF it generates a file with name like 388.pdf.zip. This is obviously not going to load.
    Do I rename the file HTMLResources.zip to make it load? What would be the path to the file if I do this? How would this work if I have multiple files I'm trying to upload in another folio?
    But you're saying I shouldn't compress the folder containing the PDF?
    This doesn't make sense...I apologize that I'm clearly missing something.

  • Remove authentication requirment from applications folder

    Hi whenever i try to copy an application to my applications folder it asks me for authentication, i don't this i want to be able to move applications into the applications folder without having to authenticate i am the admin of my computer, it was not like this in the past i don't remember if i have done something to make it like this. how do i remove this authentication requirement?
    thanks.

    abdu wrote:
    By the way do you know what could have caused that thanks
    no, I don't. in fact, I'm still confused by this. the permissions on the Applications folder are recorded in the permissions database and running repair permissions should have fixed this. the fact that it didn't means that you might have a problem with your permissions database. could you run "repair permissions" again? see what if anything happens to permissions on Applications.

  • Removing phone number from public listing

    Hi
    I have been receiving unwanted calls from anonymous number and so do not wish my contact details to be available on public directory listing.
    How do I opt out
    Can someone please let me know

    You could also maybe check out BT Choose to Refuse, there is an explanation here
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

Maybe you are looking for

  • Error when determining  a number from object BI_ODS

    Error When determining a number from object BI_ODS and number 01  when flat file source system is assigned to transfer rules of infosource , when activating this error occured . plz need solution.

  • Alv report in PP

    ·     I have a requirement to prepare alv report to know the Production order details having the status REL (Released), CSER (Error in cost calculation). someone let me know the tables and the fields that i need to use in this report. thank you.

  • Check table Harmonization Syncrhonization with R/3

    Hi all, Has anybody tried to synchronize the harmonized Check table data with R/3? I am designing central master mainteance scenario however not sure how to syncronize (not Syndicate, that's easy using MDM tool) check table data with R/3. e.g. If I c

  • Text starts to move  after selection

    my dynamic text starts moving from left to right after selection that content in text field ,please reply

  • Colour cast and darkening on import

    I've just imported photographs taken with a new camera (Canon 7D). The photos look fine at first, whilst rendering the preview and the histogram is "calculating ...", but then change, becoming darker, with an orange cast. This is not happening to all