Remove a report from CUCM Cisco Unified Reporting

Hello,
I did a Unified CM Cluster Overview report in CUCM 8.6 (a cluster with 2 nodes, replication is good) but it took a long time. So I stopped the process.
But when I enter the Unified CM Cluster Overview in Unified Reporting, it shows that generated report. And when I click it, it shows
"ERROR : Fatal error encountered while validating report XML with schema".
My question is : How can I delete a report from Cisco Unified Reporting ?
I searched in Cisco Unified Reporting Administration Guide and I didn't found a way to do it.
EDIT : Well the report was being generated, and the report can finally be displayed. But the question remains open. How can I delete this report ?
Thank you for your answers.

Hi Mohamed,
Generate a new report, it will overwrite the old one. There is no option to delete it from cucm admin page. If you are concerned about the time it took to generate the report the first time then restart the Database Layer Monitor and Tomcat services before running a fresh report. Tomcat needs to be restarted from CLI of the Pub ( utils service restart Cisco Tomcat ), it is case sensitive.
HTH
Manish

Similar Messages

How to remove the underline from Title of a report.

How to remove the underline from Title of a report.
plz tell.

You have to go inside the title view :-)
Regards,
Stefan

Cannot load report from server in Crystal Reports 2013 Viewer

Hello,
I am having trouble opening a report that is hosted on a Crystal Reports Server (2013) from the Crystal Viewer. I've created and uploaded the reports using the report designer (version 2013). The reports have been uploaded using the "Save As -> Enterprise" to save to my enterprise server. This part works fine. I then navigated to the Crystal Reports Viewer to open my report (that I just uploaded w/ the designer) from the server. Depending on the report, one of two things happens:
1.) I get a loading bar at the bottom right of the screen that says "Operation in progress . . ." followed by an error message:
Unable to Refresh Report
A problem occurred while refreshing on the server. The report may not be configured properly for refresh.
Please contact your server administrator. (me)
2.) I get a loading bar at the bottom right of the screen that says "Refreshing <file name of the report> (<server name>)" followed by... nothing. The loading bar goes away and nothing happens. It goes back to the screen that shows when the application first loads (blank canvas).
I've taken some basic troubleshooting steps to try and rule out any potential issues that came to mind, but I've not been successful.
Any help would be appreciated, thanks!

Hi
Check the below thread
Crystal Reports 2013 data didn't refresh using OLE DB Provider for SQL Server
With Regards
Balaji Sampath

Run the reports from out of the Reports Builder

Hi, happy new year for everybody!
I'm new on Oracle. I would like to know how can I run the reports created on Reports Builder (Developer Suite) without enter the Reports Builder. The ideia is to allow a common user access the report, enter the parameters and see the result.
Thanks!
Adriano

Hello,
You can start a Reports Server :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_strt.htm
2 Starting and Stopping OracleAS Reports Services
then, execute the Reports using the Reports Servlet :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_run.htm
13 Running Report Requests
Regards

Run Reports from WebSite via the Report Server

How do I run reports stored on the Reports Server via hyperlink
from a WebPage ?? Pls. help!

You can achieve by two way
One :
srw.set_hyperlink('http://servername/dev60cgi/rwcgi60.exe?
run+report=reportname+userid=scott/tiger@hostname+destype=cache+d
esformat=htmlcss+server=report_server_name+parameter 1
= '||:deptno);
you will have to make dev60cgi as virtual directory
two :
web.show_document('cgi-bin/rwcgi60.exe?
run+report=run+report=reportname+userid=scott/tiger@hostname+dest
ype=cache+desformat=htmlcss+server='||report_server_name'
||'+parameter=yes');
you will have to make cgi-bin (your oracle2home ) as virtual
directory

Calling Reports from Forms, and creating Reports objects

Hello I'm trying to create a Form which lists and launches all of our Reports. In our Client/Server set up we just have a Form which is based on a lookup table of Reports. When the user selects a report on the Form RUN_PRODUCT is used to call the report.
In Forms 9, do I have to create a Report object in the Form for every Report in our system and do I really have to modify the Form every time a new Report is created to add the new Report in?

Hello,
No, one single report object could fit for any report, if you modify its properties at runtime. 
For information, I have written a Forms 9i module able to run any report with 0 up to 10 parameters
Hope this helps
Francois

Verifying data coming from Cisco Unified CCX Historical Reports

Good afternoon
I (along with a number of other colleagues) are heavily involved in a project to take data from a wide variety of different sources and merge it all into one system so that we can report on it in a joined-up manner.
The project comprises a number of different types of data source (such as Telephony or CRM). Within each data source type, we have various suppliers of those products. In the case of telephony data (which I'm looking into at the moment), the eventual aim is to make it possible to take data from any of the telephony platforms in use across our business (currently AVAYA, Alcatel and Cisco) and report on it in a uniform way, thus negating the need for an end-user to know what the Cisco definition of AHT is (for example).
The switch I'm currently looking at is a managed switch, meaning that we don't have any sort of direct access to the back-end database(s). We could probably get it, but I suspect that the company that manages it for us would probably charge a small fortune for that. In view of this, I'm working with a number of the standard reports in the Cisco Unified CCX system. My plan (at the moment anyway) is to identify the reports that we can use that will best provide details of all calls into and out of our contact centres. I'd be looking to get the exact details of each individual call, which could then be rolled up into manageable intervals (such as 15-minute or 30-minute).
Before I go much further, I'd like to be clear on something: I'm a database developer rather than a telecoms engineer so if I ask something that appears to be obvious then I apologise in advance. I've got quite a bit of experience of working with the CTI system that sits on top of our AVAYA platform, but it's proving to be a bit of a wrench effectively "un-learning" that system so that I can make room in my head for the Cisco solution.
So, what I've learned (or have guessed) so far is this:
When I run the Application Performance Analysis report, the Application Names that are returned are effectively the Call Routes that are set up in the system. Each Call Route can be fed by one or more Called Number (which I understand to essentially be a DDI);
The Application Summary Analysis report shows the same Application Name information as is shown in the Application Performance Report. However this report also shows the Called Number, thus providing slightly more information about the individual DDI being answered;
My next plan is to try and run an Agent-level report so that I can see exactly which calls each agent handled. This is where I've run into problems: I ran the CSQ - Agent Summary report for the whole of 17th October. I then ran the Agent Detail report for the same period, and ran it out to CSV so that I could "play" with the data. The CSQ - Agent Summary Report shows that a particular agent on a particular CSQ Name (ID) handled a total of 29 calls. However, if I filter the Agent Detail report for that agent and CSQ, I get a total of 30 calls and for the life of me am unable to identify where the missing call is coming from. Initially I'd thought it might be bacause the CSQ in question has two separate DDIs but as far as I can see, this is making no difference.
I NEED to be 100% sure that when I'm importing the data from the Cisco reports into our system, I am then able to mimic the types of reports that are coming from Cisco, with the same figures. Therefore, if anyone can help me, I'll be extremely grateful.
TIA
Ian Henderson

The "Cisco Unified CCX Historical Reports Scheduler" sits in my startup folder but seems like it doesn't "run" at startup. So I ran a "test":
- Manually right-clicked the "Cisco Unified CCX Historical Reports Scheduler" icon in the startup folder and chose "Run as Administrator"
I didn't log off or reboot PC and the reports are running again. I checked the "properties" of the icon and I did make sure it was already set to "Run this program as an Administrator" under the "Compatibility" tab.
Not sure why it's not working...
Thank you for any help you can provide....

Calling a XML Publisher report from FND_SUBMIT_REQUEST

Hi,
I need to submit a XMLP report from FND_SUBMIT_REQUEST.
The report will have say, 4 templates for 4 seperate languages.
Now, when i call the report from submit request, i need to give the name of a template that will get attached.
Does anybody have any idea which parameter in the submit request parameter list takes the name of a template?
Please let me know if anybody has any info on this.
Can mail me at [email protected]
Regards,
Satrajit

Hi,
You can use FND_REQUEST.SUBMIT_REQUEST for submitting the report. The syntax is as follows:
function FND_REQUEST.SUBMIT_REQUEST
(application IN varchar2 default NULL,
program IN varchar2 default NULL,
description IN varchar2 default NULL,
start_time IN varchar2 default NULL,
sub_request IN boolean default FALSE
argument1,
argument2, ..., argument99,
argument100) return number;
Here is the code that I used for submitting XML Report Publisher from within my Oracle Report's AfterReport trigger. The parameters are explained.
a:=FND_REQUEST.SUBMIT_REQUEST('XDO', 'XDOREPPB','Varun XML Report Printing', NULL, FALSE, :P_CONC_REQUEST_ID , 'MYONT','MY_PREPACK_XML','en-US' ,'N', 'RTF', :p_output_format,NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL );
srw.message(123,'Value of New Request : ' || a ||' Output Format :'||:p_output_format);
Hope it helps.
Thanks
Varun

Adding update and delete buttons to a Report from SQL Query

There is an option when creating a QBE to add update and delete
links which i find quite useful, but this option doesn't seem to
be possible on a Report from SQL Query. Do i need to do
something special to add them? is the option located in a
different place?

Hi,
You can only add Update ,Delete in QBE Reports,
there is no option in Portal which can be used to
have these buttons in the Reports from Query Wizard or
Report from SQL Query.
Thanks
Vineet

Printing a report from forms

I would like to print a report from forms without opening reports first. Is this possible and if so how?

From a command-line or .BAT file (assuming Windows and Developer6i) run the following (on a single line). It will go to your default printer.
<ORA_HOME>\bin\rwrun60 <report>.rdf userid=<user>/<pw>@<hoststring> destype=printer batch=yes
null

Context Overflow Error while executing report from browser.

Hi All,
I am running one report from browser, the same report is running properly on backend.
But when I am running the same for long period (more than 2 months) it is giving me context overflow error.
I have also checked the value of parameter MaxCtxtSize on ITS and it is currently set to 5 MB.
Should I increased this value ??? ITS version is 6.20 - Standalone.
Pl guide me to solve this problem.
Regards,
Aditya.

Dear Edgar,
Thanks a lot.
Below is the error message reported in the file diagnostics.log.
A 2009-02-03T09:12:24.039 [agate,sapjulep] 00, s02748798, PpttRuntimeError: Runtime error: Assignment to context failed
(context overflow)!
A 2009-02-03T09:12:24.039 [agate,sapjulep] 00, s02748798, PpttRuntimeError: jump through trap...
A 2009-02-03T09:12:24.039 [agate,sapjulep] 00, s02748798, PpioTraverseHtmlPP: PpttTraverseParseTree(D:\SAPMPS\config\..\IT1\templates\system\dm\generator.html) failed, rc=0x306
A 2009-02-03T09:12:24.039 [agate,sapdiag ] 00, s02748798, HtmgBuildHtmlPage: IntpDoInterpret (D:\SAPMPS\config\..\IT1\templates\system\dm\generator.html) failed, rc=0x2104
A 2009-02-03T09:12:24.039 [agate,sapxgdk ] 00, s02748798, ContAllocAligned: Allocating 52 bytes (16 of 5242880 bytes available) failed, no streaming supported. Consider bumping a container size (3) in the registry.
Pl help.
Regards,
Aditya.

I want to run report from FORM

I want to run report from FORM. The report will save in PDF format then OPEN automatically in PDF
Every PDF file should have a unique file name.
I am using Form 6i and Reports 6i

DECLARE
vParamList PARAMLIST;
BEGIN
vParamList:=GET_PARAMETER_LIST('MyRep');
IF NOT ID_NULL(vParamList) THEN
DESTROY_PARAMETER_LIST(vParamList);
END IF;
vParamList:=CREATE_PARAMETER_LIST('MyRep');
SET_REPORT_OBJECT_PROPERTY('report_path\emp_rep_def',REPORT_DESFORMAT,'PDF');
RUN_PRODUCT(REPORTS,'report_path\emp_rep_def',ASYNCHRONOUS,RUNTIME,FILESYSTEM,vParamList,NULL);
END;

Run Report from Forms

I need help!!!Can anyone tell me...
1)how to start a report from Forms?
---The report is already attached to Object Navigator
---I made a WHEN_PRESSED_BUTTON
and the Trigger for this button like this.....
DECLARE
rep_id REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
rep_id := find_report_object('StatusReport');
SET_REPORT_OBJECT_PROPERTY(rep_id,report_desformat,'PDF');
SET_REPORT_OBJECT_PROPERTY(rep_id,report_execution_mode,runtime);
SET_REPORT_OBJECT_PROPERTY(rep_id,report_comm_mode,synchronous);
SET_REPORT_OBJECT_PROPERTY(rep_id,report_destype,screen);
v_rep := RUN_REPORT_OBJECT(rep_id);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED'
then message('Report executed');
else message('Error! The Report can not be executed');
end if;
END;
Wenn I push the button I get....
<<<<Cannot find report: invalid ID>>>>>>
2)How to make a list as result of a select(for example
the result of-> select s_v_insert_date from status_values)In this list I have to use WHEN-MOUSE-DOUBLECLICK for defining a bindvariable before the report starts?
3) How to start from forms an sql script?
4) Is there a Forms Documentation?
many thanks,nona

This forum is meant for discussions about OTN content/site and services.
Questions about Oracle products and technologies will NOT be answered in this forum. Please post your product or technology related questions in the appropriate product or technology forums, which are monitored by Oracle product managers.
Product forums:
http://forums.oracle.com/forums/index.jsp?cat=9
Technology forums:
http://forums.oracle.com/forums/index.jsp?cat=10

List problem while calling report from froms

forms 6i i am using.
i am passing parameters to report from my form.
in report i have company parameter.
user select ALL/Specific
i populate list for specific on run time like with this query.
Populate_Group_With_Query(rg_id,'select sym_code,sym_code from companies');
but how can i populate companies name along with all option in my list item.

query works fine..
now i have all in my list along with other sym_code.
but when i give ...ALL... as initial value in my list item..
it gives error
initial value does not match available list items.
even all is in list..

PDF Reports from Portal

My goal: PDF report for print-out, launched from Portal, that displays text and image (.jpeg, .gif, .bmp, etc.) data pulled from the database. Currently, users retrieve this data right from the portal via JSP portlets. This works great. We'd like to get a good-looking report containing this data for inclusion in electronic documents and hard copy files and PDF seems a good way to go. Right now, my idea is to create the report from SQL query in Report Builder creading a .rdf file and somehow launch this from the Portal allowing users to pass selection parameters.
Questions:
1. What's best way to launch a .rdf report (PDF output) from Portal?
2. What are the tricks of pulling in and displaying blob data (from Portal30 schema) in a .rdf report with PDF output?
Thanks!

Take a look at the Portal - Reports integration documentation. It will tell you how to deploy Oracle Reports on the Portal.
As far as displaying images, Report Builder Online Help -> search on word image ->selecting image from the database.
My goal: PDF report for print-out, launched from Portal, that displays text and image (.jpeg, .gif, .bmp, etc.) data pulled from the database. Currently, users retrieve this data right from the portal via JSP portlets. This works great. We'd like to get a good-looking report containing this data for inclusion in electronic documents and hard copy files and PDF seems a good way to go. Right now, my idea is to create the report from SQL query in Report Builder creading a .rdf file and somehow launch this from the Portal allowing users to pass selection parameters.
Questions:
1. What's best way to launch a .rdf report (PDF output) from Portal?
2. What are the tricks of pulling in and displaying blob data (from Portal30 schema) in a .rdf report with PDF output?
Thanks!

Remove a report from CUCM Cisco Unified Reporting

Similar Messages

Maybe you are looking for