Remove a value from chart

Hello,
Is it possible to remove a certain value from a bar chart ? I have all necessery values on my chart with addition of one bar which include all leftovers which should be removed.
Thanks in advance for any suggestions
I use Crystal reports XIR2.
Best regards
Wojtek

Thanks for a tip,
The problem is that i could not touch selection criteria as i have three objects (table and two charts), each displaying slightly different scope of data. If i remove values unnecessary for first chart i could also remove objects which are fine for other one.
I have it all on a main report without any subreports. But it seems that i will have to push this one into subreport. The disadvantage is that i will have to run very similar queries once for each subreport. That was a thing which i wanted to avoid.
But maybe there is some workaround for this type of case ?
Best regards
Wojtek

Similar Messages

Removing duplicate values from selectOneChoice bound to List Iterator

I'm trying to remove duplicate values from a selectOneChoice that i have. The component binds back to a List Iterator on the pageDefinition.
I have a table on a JSF page with 5 columns; the table is bound to a method iterator on the pageDef. Then above the table, there are 5 separate selectOneChoice components each one of which is bound to the result set of the table's iterator. So this means that each selectOneChoice only contains vales corresponding to the columns in the table which it represents.
The selectOneChoice components are part of a search facility and allow the user to select values from them and restrict the results that are returned. The concept is fine and i works. However if i have repeating values in the selectOneChoice (which is inevitable given its bound to the table column result set), then i need to remove them. I can remove null values or empty strings using expression language in the rendered attribute as shown:
<af:forEach var="item"
items="#{bindings.XXXX.items}">
<af:selectItem label="#{item.label}" value="#{item.label}"
rendered="#{item.label != ''}"/>
</af:forEach>
But i dont know how i can remove duplicate values easily. I know i can programatically do it in a backing bean etc.... but i want to know if there is perhaps some EL that might do it or another setting that ADF gives which can overcome this.
Any help would be appreciated.
Kind Regards

Hi,
It'll be little difficult removing duplicates and keeping the context as it is with exixting standard functions. Removing duplicates irrespective of context changes, we can do with available functions. Please try with this UDF code which may help you...
source>sort>UDF-->Target
execution type of UDF is Allvalues of a context.
public void UDF(String[] var1, ResultList result, Container container) throws StreamTransformationException{
ArrayList aList = new ArrayList();
aList.add(var1(0));
result.addValue(var1(0));
for(int i=1; i<var1.length; i++){
if(aList.contains(var1(i)))
continue;
else{
aList.add(var1(i));
result.addValue(var1(i));
Regards,
Priyanka

Remove null values from query

Hi All;
Below is my query and the output and i need to remove null values from the output
Any help regarding same is much appreciated
Thanks
; WITH CTE AS
select a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid,c.contactid,c.fullname,a.new_mainprogramme_idname,
a.new_subprogramme_idname,
a.owneridname,
a.new_dateofapplication,count(appt.activityid) as NoOfAppointments,
ap.scheduledstart,
ap.scheduleddurationminutes
from opportunity a
left join contact c on (c.contactid = a.parentcontactid)
inner join activitypointer ap on ( ap.regardingobjectid = c.contactid )
inner join appointment appt on (appt.activityid = ap.ActivityId)
where
appt.new_didmeetingtakeplace = 1
and appt.statecode = 1 and
(a.SCRIBE_DELETEDON is null and c.SCRIBE_DELETEDON is null and ap.SCRIBE_DELETEDON is null and appt.SCRIBE_DELETEDON is null)
group by a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid, c.contactid,c.fullname,a.owneridname,
a.new_mainprogramme_idname,a.new_subprogramme_idname,
a.new_dateofapplication,ap.scheduledstart,
ap.scheduleddurationminutes
union
select a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid,c.contactid,c.fullname,
a.new_mainprogramme_idname,a.new_subprogramme_idname,a.owneridname,
a.new_dateofapplication,count(appt.activityid) as NoOfAppointments,
ap.scheduledstart,
ap.scheduleddurationminutes
from opportunity a
left join contact c on (c.contactid = a.parentcontactid)
inner join activitypointer ap on (ap.regardingobjectid = a.opportunityid)
inner join appointment appt on (appt.activityid = ap.ActivityId)
where
appt.new_didmeetingtakeplace = 1
and appt.statecode = 1 and
(a.SCRIBE_DELETEDON is null and c.SCRIBE_DELETEDON is null and ap.SCRIBE_DELETEDON is null and appt.SCRIBE_DELETEDON is null)
group by a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid,c.contactid,a.owneridname,
a.new_mainprogramme_idname,a.new_subprogramme_idname,
c.fullname,a.new_dateofapplication,
ap.scheduledstart,
ap.scheduleddurationminutes
CTE2 As
select opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,
new_mainprogramme_idname,new_subprogramme_idname,cte.owneridname,
ac.new_businessstartdate,new_dateofapplication,(NoOfAppointments),
case when ac.new_businessstartdate > = CTE.scheduledstart
then (CTE.scheduleddurationminutes) end as PreStartHours,
case when ac.new_businessstartdate < CTE.scheduledstart
then (CTE.scheduleddurationminutes) end as PostStartHours
pp.new_outputs,
case when po.new_outputsname = 'Pre Start Assist'
then 'Yes' else 'No' end as Precheck,
case when po.new_outputsname = 'Business Assist'
then 'Yes' else 'No' end as Buscheck
from CTE
join account ac on (ac.accountid = CTE.parentcustomerid)
join dbo.new_programmeoutput as po on (CTE.opportunityid = po.new_relatedopportunity)
join dbo.new_programmeprofile pp on (
po.new_mainprogrammeid = pp.new_mainprogrammeid and
po.new_subprogrammeid = pp.new_subprogrammeid
and pp.new_claimstartdate = po.new_claimdate
and pp.new_outputsname = po.new_outputsname)
where (ac.SCRIBE_DELETEDON is null)
group by opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,ac.new_businessstartdate,new_dateofapplication,NoOfAppointments,
scheduledstart,new_mainprogramme_idname,new_subprogramme_idname,cte.owneridname,scheduleddurationminutes
select opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,
new_mainprogramme_idname,new_subprogramme_idname,cte2.owneridname,
new_businessstartdate,new_dateofapplication,(NoOfAppointments),
PreStartHours, PostStartHours,po.new_programmeoutputid,
case when (new_outputsname) = 'Pre Start Assist'
then 'Yes' else 'No' end as Precheck,
case when (new_outputsname) = 'Business Assist'
then 'Yes' else 'No' end as Buscheck --po.*
from cte2
left join dbo.new_programmeoutput as po on (cte2.opportunityid = po.new_relatedopportunity)
where po.new_claimmonthidname is not null and po.statuscode_displayname = 'claimed'
group by opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,
new_mainprogramme_idname,new_subprogramme_idname,cte2.owneridname,
new_businessstartdate,new_dateofapplication,(NoOfAppointments),
PreStartHours, PostStartHours,po.new_programmeoutputid,new_outputsname
--where new_claimmonthidname is not null --and CTE2.PreStartHours is not null and CTE2.PostStartHours is not null
Pradnya07

i need to remove null values from the output
Hello,
What exactly do you mean with "remove", to filter the rows out from result set or to replace the null value by an other value e.g. 0? This can be done with the
ISNULL function:
ISNULL(case when ac.new_businessstartdate > = CTE.scheduledstart
then (CTE.scheduleddurationminutes) end, 0) as PreStartHours, ...
Olaf Helper
[ Blog] [ Xing] [ MVP]

Remove Blank Values from Slicer in Power View

Hi all,
I am trying to create a power view report from a power pivot data model. After creating the model when I try to use the slicer in power view I am seeing the Blank record. Then I checked that dimension in model where I don't have any blank value in there.
Also I checked in fact table where it has a relationship with that dimension and I don't see any blank value there as well.
I am currently blocked with this issue. Experts please jump in and give some ideas how to remove blank value from there.
Thanks

As MM-99 already stated correctly, the BLANK-member is created if there is one or more non-matching row in your fact-table that does not exist in the dimension-table
maybe you have some issues with upper and lower case?
or maybe there are some whitespace characters contained in the text?
to identify the issues you may want to create a calcuated column in your fact-table as =RELATED('DimTable'[MyKeyColumn])
then you can filter on that column and see if any blank values appear
hth,
gerhard
Gerhard Brueckl
blogging @ http://blog.gbrueckl.at
working @ http://www.pmOne.com

How to remove a value from a vector of vectors

How can I remove a value from a vector inside another vector, say;
Vector myvector= new Vector();
Vector data= new Vector();
myvector.addElement(rs.getString(1));
myvector.addElement(rs.getString(2));
myvector.addElement(rs.getString(3));
data.addElement(myvector);
I want to get an element in the Vector "myvector" at index 2.

import java.util.*;
public class Test {
public static void main(String args[]) {
    Vector myvector= new Vector();
    Vector data= new Vector();
    myvector.addElement("Zero");
    myvector.addElement("One");
    myvector.addElement("Two");
    data.addElement(myvector);
    System.out.println("main vector initially contains:" + data);
    myvector.remove(1);
    System.out.println("main vector now contains:" + data);
}Output:
main vector initially contains:[[Zero, One, Two]]
main vector now contains:[[Zero, Two]]
Just to be sure I was correct in the first place. Perhaps you should have done likewise before continuing stick to your guns.

How to remove default value from table definition?

Hi,
running 9.2
Following problem :
I need to remove default value from table.
Example
CREATE TABLE MY_TABLE(
NAME VARCHAR2(50) DEFAULT 'NAME',
AGE NUMBER DEFAULT 0
Now even when I use MODIFY like
ALTER TABLE MY_TABLE MODIFY (NAME VARCHAR2(10) );
The default is still there:
SELECT DATA_DEFAULT FROM USER_TAB_COLUMNS WHERE TABLE_NAME = 'MY_TABLE';
Is there any way?
Thanks

Thanks,
found the answer. It is not possible!!!!
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_3001.htm
Note:
If a column has a default value, then you can use the DEFAULT clause to change the default to NULL, but you cannot remove the default value completely. That is, if a column has ever had a default value assigned to it, then the DATA_DEFAULT column of the USER_TAB_COLUMNS data dictionary view will always display either a default value or NULL

To remove a value from registry while uninstalling the program

I am creating an installer for my exe developed in Labview.
I added some value to the registry during first run,
which i was given to customer. During every time
program starts it will check for this value in registry.
My problem is that when i am uninstalling the program
from add and remove program i want to remove this
value from registry.How can i do this?
Plz some one help me?
With Regards

You can use the Labview functions Delete Registry Key and Delete Registry Value if you write your uninstall in Labview.
- tbob
Inventor of the WORM Global

Removing a value from an array

I have searched the forums, and found many post about this, but with different variances.
i have an array, where if a user passes an argument that already exists in the array, it will remove that value from the array. when i run the code below i get a boolean exception. i "think" my thinking is correct, but i cannot seem to put it into code terms (HAH! thats a first eh?).
what exactly be the difference to setting the position to 0 or to null?
public void remove(int lessNum) throws NotFoundException {
   for( int i=0;i<this.occupied.length;i++) {
        if(occupied.equals(lessNum)
     occupied[i] = null;
     else
     throw new NotFoundException();
}//end for
}//end remove
this is the exception i get: boolean cannot be dereferenced
                    if(occupied[i].equals(lessNum)
^
Thanks,
J

Hi.
(You have a few typos in your code, but I'm assuming that's because you typed it in again when you sent your posting rather than copying and pasting it. Your compilation error is also not consistent with the code, but I'll take a guess at what is going on)
There are a number of things that are strange about the code example.
1. It looks like your 'occupied' field is a boolean[] (the compilation error indicates that this is the case). That means each element of occupied is a primitive boolean, not a reference. Therefore trying to dereference it makes no sense. This is what the compiler error is telling you. Note that this is not an exception.
2. Now looking at the intent of what I think you're trying to do... I think you are trying to determine if element i of the 'occupied' array is equal to the parameter 'lessNum'. This is nonsensical since the elements of 'occupied' are booleans and lessNum is an int.
3. Finally, trying to set an element of 'occupied' to null, doesn't make sense because the elements of 'occupied' are not references, but primitives.
Regarding your question about the difference between setting something to 0 or null: I assume you come from a C or C++ background where 0 and null are the same thing. In Java, null is not equivalent to 0 but is instead a special value for a variable of reference type that means that the variable is not currently referring to anything. In C and C++ if a pointer has the value 'null' or 'zero' it simply means that any attempt to dereference it will mean an attempt to look for an object at memory address 0 which will usually result in unimaginable horrors (alright, it's not that bad).
Regards,
Lance
Lance Walton - [email protected]
Team In A Box - Software without Tragedy
http://www.teaminabox.co.uk

Removing Null values from character string

Hi All,
Can i remove NULL values (hexadecimal - 0000) from character string. I am uploading a file from presentation layer (shared server) and getting NULL values in many fields which i want to remove.
please assist.
Thanks for you help..
Regards,
Mohaiyuddin

Hi,
Most likely, nobody needed it, but if anybody in future will need the solution for related problem - here's solution:
data: lv_nullchar type xstring value '0'.
shift lv_xstring right deleting trailing lv_nullchar in byte mode.
shift lv_xstring left deleting leading lv_nullchar in byte mode.
This hack deleting null chars in lv_xstring at end file and at begining of file. Works perfect for me, where i also worked with files.

Remove default value from dropdown list

I am currently working with Acrobat XI Pro version. I want to know whether it is possible to remove the default value from a dropdown list.
When the list has less than 4 items, it is possible to deselect the default value by pressing the whitespace below. However, when there are more items, this is not possible anymore.
I have read that you should include a whitespace as item in the item list, however, then you will see an empty list item when people are working with the pdf which is not preferable.
So, does anyone know how to remove the default value from a dropdown list?
Thanks!

Ok, I found a perfect workaround for my problem using FormsCentral for Acrobat. Here is what you should do:
Step 1:
-   Open FormsCentral
-   Create New Form (Choose Blank Form)
-   Click on the dropdown icon to create a new dropdown
-   Fill in the list items by clicking on the edit (you also can add a label if you want)
-   Click: File > Save as PDF Form...
Step 2:
-   Open the saved PDF (you now see a blank pdf with a dropdown menu)
-   Click: Tools > Forms > Edit Form (when a popup shows that you should save a copy of the document in order to make changes, press "Save as a copy" and open the pdf copy file with Acrobat)
-   Select the dropdown, copy the dropdown and paste it in the desired document
Now you have a dropdown menu without a default choice. Keep in mind that you cannot edit the items in the dropdown, because a default choice will be chosen and you have to use the pdf copy file again. As long as you don't click on a list item, it doesn't choose a default choice.
It is not a perfect solution, but it works for me.
Good luck and thanks!

MDM Import Manager - remove multiple values from a multi valued fiedl

Hi,
We have this multi-valued field and we would like to clean the values from it.
How can we do this using MDM Import Manager?
Example:
Article A
Field XPTO has values Z, T and P.
We want this field XPTO with no values. How can we do a mass actualization to clean the field for some articles?
Thanks and regards,
Maria

*We have this multi-valued field and we would like to clean the values from it.
How can we do this using MDM Import Manager?
Example:
Article A
Field XPTO has values Z, T and P.
We want this field XPTO with no values. How can we do a mass actualization to clean the field for some articles?*
Hi Maria,
There can be multiple ways to achieve this -
1.After doing field mapping for XPTO you can set conversion filter for each of the values.
2.Value map with NULL.
3.Trigger a Workflow on import/record add,run assignment and make that field NULL.
4.Run mass update for conditional assignment based on that value of XPTO.
There can be more ways,whichever suits you best you can go ahead with that.
Hope it helped
Regards,
Ravi

How to remove null values from list?

I had created a list in forms 6i and I am getting list values at run time using add_list_item function. The problem is I am getting null value at end of the list. In the property pallet I kept required yes and set the initial value but it is not removing null value. Can any one help me. Thank you.......

Hello
Sorry mis-read question on first reply.
1. Have you set a default value?
2. Is this default value still in your list?
3. What happens if you default the list's value to a value you know exists after you have populated it?
Cheers
Q
Message was edited by:
Q_STEPHENSON

Removing null values from a chart

Hello,
I have a chart embedded in a Crystal report. (v.11.5). The data set essentially is a value per date, but because of the way the stored procedure is written, I have null values returned. Is there anyway to have the chart ignore null values?
Thanks
Ray

Even if the SP returns null values, in your record selection criteria couldnt you just say NOT ISNULL() and thus eliminate null values?

How do I remove NaN values from an array?

I'm trying to test if the values in an array are less than 0.001. All of them are...BUT the problem is that some of the elements in the array are NaN. I'd like to do one of two things:
1. Remove the NaN elements from the array and set them to zero to make the test work.
2. Make the test understand that NaN elements are okay.
The test results in a boolean array of T/F values. If all of the values of the boolean array are T, it will result in a single boolean value of T. In #2, I am saying that I want it to test if an element of the array is less than 0.001 OR equal to NAN.
Solved!
Go to Solution.

Your statements don't make much sense. It's irrelevant how many NaNs are in the array. A sort will move them all to the bottom. You had said you wanted to find out if all the elements in an array are less than 0.001, and that you've got some NaNs in there. Well, this will do that:
twolfe13 wrote:
I did see how to remove NaN once, but couldn't determine a good way to generalize it other than doing a test loop. I thought there might have been a simple function that I overlooked to do this.
As I noted, there have been several posts in the past about efficient techniques for removing certain elements out of an array. Seek, and ye shall find.
Joseph Loo wrote:
Have you look at the coerce function where you can set the lower and upper limit?
That won't do anything for NaN. Or perhaps I misunderstood what you are suggesting to do?
Attachments:
NaN sort.png ‏20 KB
NaN sort small.png ‏5 KB

Remove KF value '*' from report

Hi,
In report * is coming in KF. I need to restrict those records which has KF value as '*' .
Anybody suggest how to remove this.
Points assured....
Thanks,
Debasish

Hi Debasish,
You may be interested to see the following threads ..
Help Rqd Urgent: Remove star * from query
* as result in query
How to remove Star (*) Symbol
Reporting data in alternate unit of measure
Regards.

Remove a value from chart

Similar Messages

Maybe you are looking for