Remove ABAP API patch

Is that possible to remove a ABAP API patch after installation in the client system?
We want to roll back to the previous version.
Thanks

Hi,
As per my knowledge, it is not possible to remove a ABAP API latest patch after installation in the client system. either as i said above you have atleast try this, may be it works or not. I mean not ensure whether changes made by the newer patch will be removed totally or not.
Another Workaround could be installed that R/3 sytem again on any other Machine and then using client import export or remote client copy. you can send data to your Newly installed system , here you can install your old Patch as this system doesn't contain any Patch information.
Hope it will Help you,
Rewards if useful.....
Mandeep Saini

Similar Messages

ABAP API Connection Problem

Hi folks,
I am working with the MDM ABAP API and there are some errors that do not make any sense to me.
Here is a list with the technical information:
MDM 5.5 SP 5 (5.5.40.83)
SAP NetWeaver 2004s (700)
MDM API 555/700
I have set up the Repository information in MDMAPIC, using a new created provider of the type CL_MDM_PROVIDER_55_SP05_PL00 ( MDM5.5 SP05 Patch 0, Server Build 5.5.40.79 - 5.5.40.xx ).
I then have tried to establish the connection to the server and repository and so on according to the HowTo Guides.
When I finished yesterday, I managed to connect to my local MDM Server and to retrieve the names of the mounted repositories, but I was not able to retrieve records from a certain repository. When I wanted to solve that problem today, I was not able to connect to my MDM server anymore. There have been no changes in the coding or the configuration since then, only the MDM server has been restarted and the repository has been reloaded. But apart from that, nothing has changed but still I am not able to establish the connection anymore ( Connection refused ). Then I have tried to connect to another MDM server, but there I get another error ( Connection is not trusted ), although I have rechecked a dozen times that there is the allow.ip with the proper ID of my SAP system and the according user in the MDM repository.
From time to time, the errors change without changing anything else, just by trying to execute it a couple of times. I have figured out, that sometimes I get an error out of the above mentioned provider class ( CL_MDM_PROVIDER_55_SP05_PL00 ). Is it possible, that the MDM API is not working properly with the PL00?
Hints are appreciated a lot...!
Thanks and best regards,
Sabine

Hi,
Check whether the server is down or not. If the server is down, u will get the same error message
regards,
Nikhil

ABAP API--Server return code 0xFFAA2011:

Hello SDN,
I was stuck with new issue regarding ABAP API. I am trying to update the attribute value through ABAP API, but it is giving me the error "Server return code 0xFFAA2011: RC_CM_RECORDS_LINKED_TO_DOMAINVALUE".
we are using the class for APIs CL_MDM_PROVIDER_55_SP06_PL05. MDM version is 5.5 and patch 5.
Please help me out from this issue. I am getting this error.
api that I am using was
"UPDATE_ATTRIBUT".
Waiting for your valuable response.
Regard

done. This API is working from MDM7 version, not available in MDM5

Abap API

Hi All,
I am working on a scenario where I need to use abap api to fetch data from mdm system.
Here have coded to fetch data from mdm system and done the required configurations in mdmapic transaction. but I get a dump.
It says "BSEI_MSG_BADCRC" error.
Kindly someone help me resolve this error.
I have done mdmapic configuration to use the provider class of sp06 . I also used the provider class of sp05 .both give the same error.
The build of SAPMDM is 5.5.40.83 and the provider class of spo5 in mdmapic has a build 5.5.42.79 .should the provider system have the same build . I also checked for add on with that build in service market place. It was not available.
Regards
Sudheendra

Hi,
I strongly feel it comes just because of Version Mis-matching. Your MDM Server and Provider Class shold be of same Version. as CRC always indicates Version Mismatching.
E.g. For MDM server version 5.5 SP6 patch1 then install MDM_Tech 5.5.5_640:patch004 or MDM_Tech 5.5.5_700:patch004 as per your R/3 system release.
you could check it using HowTo_07. pdf , on executing this report you could know connection to your MDM Server is estabilishing Properly or not. here in this report you have to change one Parameter logical object name which you have given in transaction MDMAPIC
you could find more Add-on patch on Service Market Place while searching in Searching for All Categories. here search using MDM_TECH
Hope it will Help you,
Rewards if useful....
Mandeep Saini

ABAP API Configuration

Hi All,
I am trying to make use of ABAP API from my R/3 system.
but I am not able to see the transaction MDMAPIC and many MDM related interfaces.
what could be the exact problem?
Any Service pack need to be added on normal R/3?
My R/3 system version is 4.7 with kernel patch NW2004 (640) dw patch 139 as per the How to guide.
Even I tried with R/3 5.0 with the same kernel patch.
I had maintained allow.ip at MDM server.
waiting for the reply

Hello,
using the MDM ABAP API requires SAP BASIS 6.40/7.00 and the right Kernel Patch level.
The API is not yet in SAP BASIS. That means it has to be downloaded from service marketplace and installed to the SAP System. After that the configuration will be there and the API is accessible.
Hope that helps.
Best regards,
Daniel

Abap api error

Hi All
I am trying to use abap api to fetch data from MDM and I am using the provider class for SP06 for MDM 5.5 SP05 installation .
I get the below dump when I execute my program.
" Protocol header 0108000000010000 has invalid signature"
on debugging I found that the program dumps at the place where the method INIT_SOCKET gets called.
Kindly someone help me resolve this error.
awaiting for reply
Regards

Hi everybody,
I guess this list will help most:
API Provider:>>>>>>>>>>>>>>>>>>>>> MDM Server Version:>>>>>>Name on marketplace:
CL_MDM_PROVIDER_55_SP05_PL00 >> 5.5.40.79 - 5.5.40.xx >>>>>> MDM_TECH_555
CL_MDM_PROVIDER_55_SP05_PL01 >> 5.5.41.29 - 5.5.41.xx >>>>>> MDM_TECH_555: patch 01
CL_MDM_PROVIDER_55_SP05_PL02 >> 5.5.42.30 - 5.5.42.xx >>>>>> MDM_TECH_555: patch 02
CL_MDM_PROVIDER_55_SP06_PL00 >> 5.5.60.59 - 5.5.60.xx >>>>>> MDM_TECH_555: patch 03
CL_MDM_PROVIDER_55_SP06_PL01 >> 5.5.61.43 - 5.5.61.xx >>>>>> MDM_TECH_555: patch 04
CL_MDM_PROVIDER_55_SP06_PL02 >> 5.5.62.29 - 5.5.62.xx >>>>>> MDM_TECH_555: patch 05
Thanks for rewards.
Regards
Andreas

MDM ABAP API ISSUE ( server is getting down )

Hi Folks,
I am trying to retrieve matching results using MDM ABAP API.
I am spiting source and target records into lot of blocks dynamically
in program. I am getting output 2 to 3 times if i can run program
sequential after that server is getting down (before running program
i am completely going out and rerunning).After server bring's up
running couple of times and server getting down.
Please help me how can i solve this issue.
Thanks,
Anil.

Hi Anil,
You can have a look at the below links can cross check the steps you have performed in establishing the connection correctly:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/00c49ffb-e5e5-2910-73ba-c85af1da5b0a
ABAP APIs: Error "The connection is not trusted"
Comaptible ABAP APIs for MDM 5.5 SP6 Patch 1
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/tip%2b%2bMDM%2bABAP-API%2b%2bThings%2bto%2bRemember%2b(for%2bStarters)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e060251e-b58d-2910-02a2-c9a1d60d9116
Hope It Helped
Thanks & Regards
Simona Pinto

ABAP API For SP06?

Hi
We are trying to integrate MDM (5.5 SP06 Patch 3) with an ECC 6.0 server. We downloaded the MDM TECHNOLOGY 5.5.5.7.00 CAR file from service market place. It was installed successfully in the ECC 6.0 server. But we are unable to find the relevant ABAP component for our MDM version in the "ABAP implementation for MDM version support" of the mdmapic transaction. The components in that table are the ones for SP04 and SP05 but not SP06.
Has anyone successfully used ABAP APIs in their SP06 environment? If yes, then what was the CAR file that was used?
Thanks.
Regards
Swarna

Hi Kanstantsin
In the begininng we had downloaded from the same path you have mentioned.
After raising OSS note SAP responded by saying that - the installations should be downloaded from the path:
Download ->
Support Packages and Patches ->
Support Packages and Patches - Entry by Application Group ->
SAP NetWeaver ->
SAP MDM ->
SAP MDM 5.5 ->
Entry by Component ->
ABAP API for NW 7.0
After doing that we are able to see the SP06 components.
But now when i try the sample code in the ABAP API How to guide, for creating a repository through API, i'm getting an error -
"Server return code 0X84020003: DCNI_MSG_ErrInitDB"
I verified the ip (same for server host and dbms host), port (20005), dbms username/password. They all seem to be fine.
Has anyone faced this issue before?
Thanks
Swarna

MDM ABAP API issue

Hi Floks,
We are getting core dump and server is getting down.
If i can run same program with same variant working couple of times
sequentially after that getting this issue.
Thanks,
Anil.

Hi Anil,
You can have a look at the below links can cross check the steps you have performed in establishing the connection correctly:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/00c49ffb-e5e5-2910-73ba-c85af1da5b0a
ABAP APIs: Error "The connection is not trusted"
Comaptible ABAP APIs for MDM 5.5 SP6 Patch 1
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/tip%2b%2bMDM%2bABAP-API%2b%2bThings%2bto%2bRemember%2b(for%2bStarters)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e060251e-b58d-2910-02a2-c9a1d60d9116
Hope It Helped
Thanks & Regards
Simona Pinto

[svn:osmf:] 11226: Updated DRM Sample to not use the removed DRMUpdater API .

Revision: 11226
Author:   [email protected]
Date:     2009-10-28 09:21:13 -0700 (Wed, 28 Oct 2009)
Log Message:
Updated DRM Sample to not use the removed DRMUpdater API.
Modified Paths:
    osmf/trunk/apps/samples/framework/DRMSample/.actionScriptProperties
    osmf/trunk/apps/samples/framework/DRMSample/src/DRMSample.mxml
    osmf/trunk/apps/samples/framework/DRMSample/src/ui/RegionComponent.as

Hi,
I was trying to create and update the calendar event using [POST] https://outlook.office365.com/api/v1.0/me/events and [PATCH] https://outlook.office365.com/api/v1.0/me/events/<eventId> respectively.
When i try with poster or postman, I get this error
{error: {code: "ErrorInvalidRequest" message: "Cannot read the request body."} }
its not working . Any help will be appreciated.
Note: GET events and DELETE Events are working. I think the API with payload is not working.

Program _____.MDS not registered..PI 7.1 EHP 1-MDM 7.1 Integration-ABAP API

Hi,
I am on the way of integrating ABAP API in PI 7.1 EHP 1 with MDM 7.1
I installed MDM ABAP API in PI system.
In transaction MDMAPIC, created MDM Server Connection with default port, DBMS Hosts and MDM Repository.
After I did the above tasks, I tested the RFC Connection, But its failed with the following error.
Connection Test MDM_API_GEN_DEFIANCEDEP
Connection Type TCP/IP Connection
Logon     Connection Error
Error Details     Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67
Error Details     ERROR: program DEFIANCEDEP.MDS not registered
Error Details     LOCATION: SAP-Gateway on host DEFIANCEDPI / sapgw00
Error Details     DETAIL: TP DEFIANCEDEP.MDS not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 87
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1714
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 711
Error Details     TIME: Sat Mar 12 13:53:55 2011
Error Details     VERSION: 2
Appreciated if replied with the proper resolution at the earliest.
Thanks in Advance
Pradeep Shetty

Hi Kanstantsin Chernichenka,
Thanks for your reply.
I tried the given suggestion. And even restarted the PI and MDM system.
Still, I am facing the same problem.
My allow.ip file contains
122.183.187.24;
122.183.187.25;
115.242.211.112;
115.184.2.47;
My MDS.ini file contents are
[MDM Server]
XCS Ini Version=1
Accelerator Dir=E:\usr\sap\MDM\MDS02\mdm\accelerators
Log Dir=E:\usr\sap\MDM\MDS02\log
Report Dir=E:\usr\sap\MDM\MDS02\mdm\reports
Archive Dir=E:\usr\sap\MDM\MDS02\mdm\archives
Distribution Root Dir=E:\usr\sap\MDM\MDS02\mdm\distributions
Transport Dir=E:\usr\sap\MDM\MDS02\mdm\transport
Modifications Dir=E:\usr\sap\MDM\MDS02\mdm\modifications
Lexicon Dir=E:\usr\sap\MDM\MDS02\exe\Lexicons\
Extra DBConnection Validation=True
Log SQL Errors=True
String Resource Dir=E:\usr\sap\MDM\MDS02\exe\LangStrings\
Stemmer Install Dir=E:\usr\sap\MDM\MDS02\exe
Wily Instrumentation=False
Wily Instrumentation Level Threshold=10
SLD Registration=True
Skip Unchanged Records=False
Autostart=0
MDS Ini Version=1
RELEASE\UseAssert=True
Tracing Level=3
LogViewer Format Logging=False
LogViewer Format Tracing=False
Trusted SAP Systems=DPI
TrustFiles Dir=E:\usr\sap\MDM\MDS02\config
Max Threads Per Operation=Auto
Lock Account After Failed Password Attempts=5
Lock Account Duration=1800
Minimal Password Length=5
Password Expiration Days=90
Password Expiration Warning=7
Disable Read Access To Corrupt Repositories=False
MDS Scone=
Log SQL Modifications=False
Maximum DBMS Bind Count=512
Oracle\Dll=OCI.DLL
Allow Console to Retrieve Files=True
Oracle Tablespace Files=1
Default Interface Language Code=eng
Default Interface Country Code=US
Client Ping Timeout Minutes=0
Inactive Client Timeout Minutes=30
Value Retrieval Threshold=0
Protect Family Nodes With Locked Data=False
Number Of Stemmers Per Language=2
TrexDllPath=
Import Slice Size=2048
Bulk Import Silo=True
Safe Silo Mode=False
Enable Change Stamp Logging=False
Always Verify DBMS Connection Before Executing SQL Statements=False
Disable Read Access To Repositories That Require Restart=False
Family Retrieval Threshold=30000
Enable Client Dictionaries=False
Restricted Url For Client Export=
Index_Page_Margin=10
Default Slice Size=500
Default Slice Wait Time MS=300
Enable Slicing For Non-Bulk Operations=False
Multithreaded Matching=True
SAP RFC Gateways=
[MDM Server\Databases\MDM_1MDMORCL_5_3_4_3]
Port=2345
Login=SYSTEM
Password+=ES066H2NVHDCFSJ206LJ9I995SLBVSA21OMQPM0
Stemmer Language=
Stemmer Variant=
Valid Keyword Chars=abcdefghijklmnopqrstuvwxyz0123456789
Max Large Text Length=250000
Number of Rows Per Fetch=100
Max Initial MB to Retain=4
Max Send Failure MB to Retain=4
Workflow Detailed Report=False
Mail Server=
Mail SMTP Timeout=1
Here I am requesting you to send your valuable feedback at the earliest.
Thanks
Pradeep Shetty

Retrieving hierarchy fields from MDM to SAP R/3 using MDM ABAP API's

Hi all,
I have developed a code to retrieve fields from MDM to SAP R/3 using MDM ABAP API's, i could retrieve all of the fields excluding the Lookup[Hierarchy] fields like- FACILITY CODE etc...
please update me if anyone has any experience on this.
Thanks and regards,
Aastha Mehrotra

Hi ,
Any one worked in the MDM API to retrieve Hierarchy fields ???
Regards,
Arun.

ABAP API and Key Mapping

Hello there,
I am trying to use the MDM 7.1 ABAP API to access MDM data from within a BI system.
Now I am wondering how to access key mapping for records in the Main Table.
In the Java API there is the RetrieveRecordsKeyMappingsCommand which returns all key mapping information for a list of record IDs. But I cannot find something similar in the ABAP API.
Who knows where to start?
Thanks for hints
Ingo

Hi ,
In ABAP API also you can retrieve key mapping of main table records using function 'MDM_API_RETR_CLIENT_SYS_KEYS'.
You will get details of this function in sap library or ABAP API documentation provided by SAP.
For any further queries kindly reply.
Regards,
Neethu Joy

ABAP API to store DATE value in MDM 5.5

Hello All,
Currently I am working on MDM 5.5 and need to have some suggestions on ABAP API Function module to store date values in MDM.
We have interface from where we take the user input which updates the field value back in the MDM.
On the basis of similar scenario we have "DATE" field on the interface which will update the date and time in MDM, also we are making use of ABAP API for development.
The problem is that data type mismatch is happening between MDM and ABAP API,please let me know which ABAP API Function module should we use which simply accepts the DATE and TIME for every single record.
Source code provided will be much more appreciable.
Regards,
Swapnil

Hi Swapnil.
In the same link provided by Sudhanshu, can you navigate to the node "Retrieving Complex Types".
It has sample codes and MDM interfaces for TimeStamp, Time Stamp, User Stamp, Literal Date, Literal Time etc.
As suggested, you can also try to use the type MDM_CDT_DATE_TIME.
See the sample code provided in the link as below:
Type: MDM Literal date:
    CLEAR lv_date.
    CONVERT TIME STAMP ls_result_ddic_ex-fieldliteraldate-content TIME ZONE sy-zonlo INTO DATE lv_date.
    WRITE: AT (10) lv_date, '|'.
Type: MDM Literal time:
    CLEAR lv_time.
    CONVERT TIME STAMP ls_result_ddic_ex-fieldliteraltime-content TIME ZONE sy-zonlo INTO TIME lv_time.
    WRITE: AT (10) lv_time, '|'.
Regards
Bala

MDM ABAP API - Language information not valid for repository

Dear all,
We're programming an interface in SAP R/3 to MDM catalog through 'MDM ABAP API's'. Automatically, it creates an RFC connection to MMD, but we're getting the following connection errorwhen executing the API:
E MDM_ABAP_API 078 Language information ENG US USA not valid for MDM repository XXXYYYZZZ*.
*where XXXYYYZZZ is the repository name.
W'e've established the connection in R/3 through transaction MDMAPIC and we've created the same user in R/3 and MDM Console.
This is the code written on the program where we are defining the language (ENG), country (US) and region (USA).
*maintain logon language information
ls_repository_language-language = 'ENG'.
ls_repository_language-country = 'US'.
**no region information needed here
ls_repository_language-region = 'USA'.
How can I see the repository language definition?
Which are the correct codes to be used for language 'English', Country 'United States' and Region 'USA'? And for other countries, like spanish language, country Spain and Region ¿spain?
In fact, we copied this code from website:
http://help.sap.com/saphelp_nwmdm71/helpdata/en/44/93ad8931381053e10000000a422035/frameset.htm
Maybe the problem is that any RFC configuration is missing, and it has to be done in transaction SM59?
Thanks for your feecback,
Carlos Santamaría.

The problem is now solved.
The correct languague information codes for Language Spanish, Country Spain and Region, are as follows:
Language: 'spa'
Country: 'ES'
Region: '___'
It is important to respect the CAPS, otherwise it doesn't work.
Regards,
Carlos Santamaría.

Remove ABAP API patch

Similar Messages

Maybe you are looking for