Remove address line from Popup page

I would like remove the address line from several popup pages I have. I know the best way to do this would be through a page template. However, I don't see where the address line would be in the template. Can someone please suggest how best to remove the address line?
Thanks!
-Reid

Reid-
Actually this is not done by templates, you can easily do that in the JS popup parameter "location" that shows/hides the location bar (where you enter URLs) as follows:
window.open ("http://www.yourlink.com","window_title","menubar=0,resizable=1,width=350,height=250"); Hope this helps,
Sam
Please reward good answers by marking them correct or helpful!

Similar Messages

How to remove characters/lines from the beginning of an InputStream

Hi,
I have a program which receives several InputStreams. From each of these streams I have to remove 2 lines from the beginning. After the lines are removed, all the streams are combined to one with SequenceInputStream and read in one chunk. Is there an easy/simple way of doing this?
One option I thought would be to read the char by char until 2 end of line chars have been detected and then read the rest of the data to a buffer. And the create a ByteArrayInputStream out of this buffer. Problem with this approach is, that the amount of data can be large, so putting all the data in to memory might cause problems.
Another option is to use BufferredInputStream and use the readline() method twice to get rid of the lines that are not needed. After this I would write the data to some output stream, which is then converted back to input stream. Propably would work, but sound too much of work for a simple thing like this. There has to be better way.
To make it simple, what I need is a method that looks like the following, or something similar
* Removes n number of lines from the beginning of a InputStream.
* @param is InputStream where the lines are removed
* @param numberOfLines int value to indicate how many lines whould be removed
* @return InputStream where lines have been removed.
public InputStream removeLines(InputStream is, numberOfLines);Thanks.

Here's the code, feel free to use it. Comments are also welcome.
public InputStream removeLinesFromTheBeginning(InputStream is, int numberOfLines) throws IOException
          char c = 'c';
          int i = 0;
          for(int n = 0 ; n < numberOfLines ; n++)
               do
                    c = (char)is.read();
                    System.out.print(c);
                    if(c == (char)-1)     // end of stream reached before any newline characters were found.
                         return null;
                    i++;
               while(c != '\n');
               System.out.println();
               System.out.println("Characters removed:" + i);
               System.out.println("n: " + n);
               i = 0;
          return is;
     }Edited by: dave_spaghetti on Jun 16, 2009 5:42 AM
Fixed a bug.

How can i remove a line from an ordinary text file?

It is easy to remove a line from a file by rewriting the file. how can i remove a line without rewriting ? Also, do not use whitespaces to overwrite the line. I expect a perfect line deletion code .....

gimbal2 wrote:
hsc71 wrote:
It's the way you communicate. Try to be carefull with the words you use in your post. It's easy to insult people just by choosing the wrong words. Bold text and capitals is equal to shouting.
shock. You said "wrong words". I am seriously offended by that!
Seriously, would you care that I am offended? I really hope not... Say what you want, people will find reasons to take offense one way or the other.Hehe, maybe you're right, but the OP still has no answer.............and in the end that's what he/she is looking for.

How to remove a list from a page ?

I added a list to a page and then later decided it would be easier to add the list to page 0. Now I can't find how to remove the list from the page.
Edited by: Rene W. on Oct 6, 2008 1:52 AM

Ok sorry I understood you wrong then.
I tried to recontruct your problem and did the following things.
1. Created a new list in: Home>Application Builder>Application 305>Shared Components>Lists>Create / Edit List
2. Created a new region on page 2: Home>Application Builder>Application 305>Page 2>Create Region Type: List, Name:"test1"
3. Created a new region on page 1: Home>Application Builder>Application 305>Page 1>Create Region Type: List, Name: "test2"
4. Deleted region "test1" on page 2
5. List and region still survived on page 1. :D
Tobias

My RGB colors are turning to cmyk while bringing image from illustrator or photoshop. Why? Removing the image from that page bright RGB colors are back.. hmm

My RGB colors are turning to cmyk while bringing image from illustrator or photoshop. Why?
Removing the image from that page bright RGB colors are back.. hmm

Edit > Transparency Blend Space > Document RGB

[svn] 4694: Don't remove text lines from the container if it isn' t the container the lines were added to.

Revision: 4694
Author: [email protected]
Date: 2009-01-27 14:35:21 -0800 (Tue, 27 Jan 2009)
Log Message:
Don't remove text lines from the container if it isn't the container the lines were added to. When there is a state change the displayObject can be switched out from under the TextGraphic and TextBox.
QE Notes: need to add tests - will attach my test program to bug
Doc Notes:
Bugs: SDK-18923
Reviewers: Gordon
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18923
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/graphicsClasses/TextBlockCompose r.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/graphicsClasses/TextFlowComposer .as

Yup, you guys pointed me in the right direction.
I changed my adjustmentListener to the following:
JScrollBar scrollBar = (JScrollBar) e.getSource();
int endLoc = document.getLength();
try {
    Rectangle end = outputArea.modelToView(endLoc);
    if (end != null) {
        int n = scrollBar.getValue() + scrollBar.getVisibleAmount();
        boolean locked = (end.y >= n && n <= (end.y + end.height));
} catch (BadLocationException ex) {
}By comparing scrollbar position with the visible rectangle of the end of the document, I can now easily tell if the user has moved the tracker back or not.
To go to the next step of automatically pausing scrolling whenever the user is moving the slider back, I also had to disable the automatic scrolling performed by DefaultCaret. Because there was no way to tell if the user was scrolling or if the output was adjusting from the adjustmentListener, I also had to flag whenever I was autoscrolling.
The end result is a JTextPane that can be appended to at all, and locked by the user by using the slider. If new data arrives, the window is not scrolled, and any text selection the user has is not cleared. Perfect!

Is there a charge to remove a line from my plan?

I have several lines on my current wireless plan. Will there be a charge to remove any of those lines and if so, how much is the fee?

KWildman, the more, the merrier! Why would you want to remove a line from your account? Let's talk about this.
When accepting a two year agreement, each line has it's own contract end date. If you cancel services prior to the contract end date, then you will be billed an Early Termination Fee. This fee varies based on the device that you upgraded to and amount of months that you've completed on that contract. For more information regarding your customer agreement and how the Early Termination Fee is calculated, click http://bit.ly/17srsZb
Lasina_VZW
VZW Support
Follow us on Twitter @VZWSupport

Way to remove HTML tags from a page-scoped attribute using JSTL?

Hi,
I'm using JSTL 1.2 with Tomcat 6.0.26. Does anyone know of a way to remove HTML tags from a page attribute, "${myExpr}". I would prefer a solution that uses JSTL only, but ultimately whatever gets the job done is fine with me.
Thanks, - Dave

I'm sorry, I don't understand your requirement. What do you mean by "remove HTML tags from a page attribute"?
If you are dealing with a value of an attribute, it is most likely a String, and should be treated as such. The best approach would probably be java coding.

How to remove new line from string

I have a string say following
String line = "one\ntwo\nthree";Now i am trying to remove new line from string. For this i did following
String txt = line.replaceAll("\\n","");But i see still new line is occuring. Is it correct way. Please advice me.

Ok. I was just using \n instead of \r\n. And i am in windows. I will give a try with \r\n
Ok i tried using following , but it doesnt work.
line = line.replaceAll("\\r\n","");Am i missing anything here. Please guide me.
Edited by: ArpanaK on Oct 8, 2007 4:44 PM

How do i remove a line from my family plan?

I need to remove a line from my family plan, how do i do it on the computer?

You can't cancel service on-line; you'll need to either call Customer Service or visit your local Corporate Verizon store.

How to removed dashed lines from "Page Break View"?

Hi,
In Excel 2010, I found that once “Page Break View” is selected, there will be dashed lines across the view even after returning to “Normal” view. These dashed lines can be distracting.
Is there a way to remove them?
Bob

Yes use
File -> Options -> Advanced
Scroll down to Display options for this worksheet and remove the tick in Show Page breaks.
Unfortunately it's sheet specific so you'll have to do it everytime it happens until you've done all the sheets.
Unless you develope some VB to do it for you,
G North MCT

Unable to remove sub-tab from portal page

Hi,
Get the following error when trying to remove a sub-tab from one of our portal pages;
An unexpected error occurred: User-Defined Exception (WWC-44082)
An unexpected error occurred: User-Defined Exception (WWC-44082)
Error while deleting page. (WWC-44130)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 4021
ORA-01403: no data found
ORA-01403: no data found (WWC-44082)
An unexpected error has occurred (WWS-32100)
ORA-1403: ORA-01403: no data found
ORA-01403: no data found (WWC-36000)
Unexpected error encountered in wwsec_api.remove_group_acl (ORA-01403: no data found
ORA-01403: no data found) (WWC-41417)
In advanced options for the tab, 'Inherit Access Settings From The Page' is selected.
Under page access settings, the 'From page template' option is selected.
Any ideas?
Cheers,
Chris

Please report this problem to Oracle Support. This is not normal behaviour.

How can I remove a line from a file?

how ca i remove one or more than one line from a text file?

Open the file for input.
Open another file for output.
Read each input line.
If you want to delete it, go get the next line
Otherwise, write the line to output, and go get the
next line.
Close both files.

How to remove empty lines from xml files after removing nodes from document

<pre>
Hi
<b>i have xml document, which is shown below
after removing some nodes from the document ,i am getting empty lines in place of removed nodes,how to resolve this and get the proper xml document without any errors</b>
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE Message SYSTEM "TRD01.dtd">
<Message>
<Header>
<CounterPartyType>CLIENT</CounterPartyType>
<CreationTime>20134455</CreationTime>
<ErrorCode>363 </ErrorCode>
<ErrorEnterPriseId>N</ErrorEnterPriseId>
<ErrorStatus>1</ErrorStatus>
<ErrorSystemId>STL</ErrorSystemId>
<ErrorTimes>31</ErrorTimes>
<MessageType>T</MessageType>
<RecipientEnterpriseId>N</RecipientEnterpriseId>
<RecipentSystemId>EXM</RecipentSystemId>
<Remarks>REMARSK</Remarks>
<SenderEnterpriseId>N</SenderEnterpriseId>
<SenderSystemId>TR</SenderSystemId>
</Header>
</Message>
<ErrorCode>363 </ErrorCode>
<ErrorEnterPriseId>NIHK</ErrorEnterPriseId>
<ErrorStatus>1</ErrorStatus>
<ErrorSystemId>STL</ErrorSystemId>
<ErrorTimes>31</ErrorTimes>
XPathExpression expression5 = xpath.compile(xmlpath5);
Object result5 = expression5.evaluate(doc, XPathConstants.NODE);
Node node5 = (Node) result5;
node5.getParentNode().removeChild(node5);
XPathExpression expression6 = xpath.compile(xmlpath6);
Object result6 = expression6.evaluate(doc, XPathConstants.NODE);
Node node6=(Node) result6;
node6.getParentNode().removeChild(node6);
XPathExpression expression7 = xpath.compile(xmlpath7);
Object result7 = expression7.evaluate(doc, XPathConstants.NODE);
Node node7=(Node) result7;
node7.getParentNode().removeChild(node7);
doc.normalize();
doc.normalizeDocument();
TransformerFactory tf = TransformerFactory.newInstance();
Transformer t = tf.newTransformer();
t.setOutputProperty(OutputKeys.INDENT, "yes");
t.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
t.setOutputProperty(OutputKeys.METHOD,"xml");
t.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
the xml output i am getting is
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<Message>
<Header>
<CounterPartyType>CLIENT</CounterPartyType>
<CreationTime>20134455</CreationTime>
<MessageType>TRD01</MessageType>
<RecipientEnterpriseId>N</RecipientEnterpriseId>
<RecipentSystemId>STL</RecipentSystemId>
<Remarks>REMARSK</Remarks>
<SenderEnterpriseId>N</SenderEnterpriseId>
<SenderSystemId>T</SenderSystemId>
</Header>
</Message>
<b>could you please let me know how to avoid empty lines in the xml doucment output</b>
this is the method i am using to get the result
public void ValidateRecord(String xml){
try{
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder db = factory.newDocumentBuilder();
//parse file into DOM
/*DOMParser parser = new DOMParser();
parser.setErrorStream(System.err);
parser.setValidationMode(DTD_validation);
parser.showWarnings(true);*/
System.out.println ("HI THIS xml is validation "+xml);
Resolver res = new Resolver();
db.setEntityResolver(res);
Document doc = db.parse(new InputSource(new StringReader(xml)));
XPathFactory xpf = XPathFactory.newInstance();
XPath xpath = xpf.newXPath();
// XPathExpression expression = xpath.compile("//A/B[C/E/text()=13]");
String xmlpath="/Message/Header/CounterPartyType/text()";
String xmlpath1="/Message/Header/RecipentSystemId/text()";
String xmlpath2="/Message/Header/ErrorSystemId/text()";
XPathExpression expression = xpath.compile(xmlpath);
XPathExpression expression1 = xpath.compile(xmlpath2);
Object result = expression.evaluate(doc, XPathConstants.NODE);
Object result1 = expression1.evaluate(doc, XPathConstants.NODE);
Node node = (Node) result;
Node node1 = (Node) result1;
System.out.println("the values of the string is " +node.getNodeValue());
System.out.println("the values of the string is " +node1.getNodeValue());
// for (int i = 0; i < nodes.getLength(); i++) {
//System.out.println(nodes.item(i).getNodeValue());
// CAHNGING THE RECEIPENT NODE
XPathExpression expression2 = xpath.compile(xmlpath1);
Object result2 = expression2.evaluate(doc, XPathConstants.NODE);
Node node2 = (Node) result2;
System.out.println(node2);
node2.setNodeValue(node1.getNodeValue());
System.out.println(node2);
//removing the nodes from document
String xmlpath3="/Message/Header/ErrorCode";
String xmlpath4="/Message/Header/ErrorEnterPriseId";
String xmlpath5="/Message/Header/ErrorStatus";
String xmlpath6="/Message/Header/ErrorSystemId";
String xmlpath7="/Message/Header/ErrorTimes";
XPathExpression expression3 = xpath.compile(xmlpath3);
Object result3 = expression3.evaluate(doc, XPathConstants.NODE);
Node node3 = (Node) result3;
node3.getParentNode().removeChild(node3);
XPathExpression expression4 = xpath.compile(xmlpath4);
Object result4 = expression4.evaluate(doc, XPathConstants.NODE);
Node node4 = (Node) result4;
System.out.println("node value");
System.out.println(node4.getParentNode().getNodeName());
node4.getParentNode().removeChild(node4);
XPathExpression expression5 = xpath.compile(xmlpath5);
Object result5 = expression5.evaluate(doc, XPathConstants.NODE);
Node node5 = (Node) result5;
node5.getParentNode().removeChild(node5);
XPathExpression expression6 = xpath.compile(xmlpath6);
Object result6 = expression6.evaluate(doc, XPathConstants.NODE);
Node node6=(Node) result6;
node6.getParentNode().removeChild(node6);
XPathExpression expression7 = xpath.compile(xmlpath7);
Object result7 = expression7.evaluate(doc, XPathConstants.NODE);
Node node7=(Node) result7;
node7.getParentNode().removeChild(node7);
// Node b13Node = (Node) expression.evaluate(doc, XPathConstants.NODE);
//b13Node.getParentNode().removeChild(b13Node);
doc.normalize();
doc.normalizeDocument();
TransformerFactory tf = TransformerFactory.newInstance();
Transformer t = tf.newTransformer();
t.setOutputProperty(OutputKeys.INDENT, "yes");
t.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
t.setOutputProperty(OutputKeys.METHOD,"xml");
t.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
t.transform(new DOMSource(doc), new StreamResult(System.out));
catch (Exception e) {
e.printStackTrace();
System.out.println(e.getMessage());
</pre>
Edited by: user12185243 on Apr 6, 2013 6:38 AM
Edited by: user12185243 on Apr 6, 2013 6:41 AM
Edited by: user12185243 on Apr 6, 2013 6:43 AM
Edited by: user12185243 on Apr 6, 2013 6:45 AM
Edited by: user12185243 on Apr 6, 2013 9:00 AM

either this way we can do this
1)
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
<b> factory.setIgnoringElementContentWhitespace(true); </b>
DocumentBuilder db = factory.newDocumentBuilder();
or
2)
java.io.StringWriter sw = new java.io.StringWriter();
StreamResult sr = new StreamResult(sw);
t.transform(new DOMSource(doc), sr);
String xml1 = sw.toString().trim();
<b> xml1=xml1.replaceAll("\\s",""); </b>
System.out.println(xml1.trim());

Problem removing grid lines from prints in PhotoShop Elements 13

I cannot remove faint grid lines from my prints in Photoshop Elements 13, even after I've turned off the grid overlay. How can I get these lines out? I'm desperate as I am writing a book and am stymied at this point. Help!

John Maggot wrote:
I cannot remove faint grid lines from my prints in Photoshop Elements 13, even after I've turned off the grid overlay. How can I get these lines out? I'm desperate as I am writing a book and am stymied at this point. Help!
The grid does not print. There has to be another source for the visible grid lines on your prints. Suggest that you do the following:
Make sure that your ink cartridges have plenty of ink
Do a deep cleaning of your print head
Align the cartridges as per instructions in the printer's manual
Do a test print

Remove address line from Popup page

Similar Messages

Maybe you are looking for