Remove All Adjustments

i only rarely used this feature, but after being contacted by a friend with an issue - who had upgraded to 2.1.4 - i found out that this no longer works for any group of images ... after being told of his problem, i went into aperture (2.1.3) and did a couple of tests, no issue with 'remove all adjustments' on a group ... i then upgraded my laptop to 2.1.4, reproduced his issue ...
no matter how many images are selected, it only removes all adjustments from the 'primary' image as if the primary only function is turned on ... it's not i checked ...
fyi - this behavior has been reproduced on three machines running 2.1.4 (all with 10.5.8) ... all three machines have been rolled back to 2.1.3 ... behavior normal ...
thoughts ?!?!? anyone else able to replicate ?!?!?
i have submitted feedback via the application ...

I had a similar issue (both 2.13 and 2.14) with applying keywords. If you have multiple images displayed and apply keywords using the keyword buttons in the control bar then they are applied to all selected images. If you type in keywords (in the inspector) then only applied to the main selected image. I assumed this was how it was meant to work and never thought of it as a bug. Took me a short time to notice and work out what was going on but once aware of it I just apply keywords through the control bar.
Sounds like a similar thing to your experience with removing adjustments (i.e. only the main image being affected).

Similar Messages

  • Toggle All Adjustments Off

    Is there a way to toggle all of the adjustments off and on? I know you can do each one individually, but how can I turn all off at once?
    Also, how can I customize the default adjustments. I'd like the sharpen option to be an option every time.
    Thanks,
    Zach

    Zach,
    Is there a way to toggle all of the adjustments off and on?
    Do you really want to remove all adjustments, or do you want to see what your original picture was? If you just want to see your photo as it was before adjustments, you can use the "M" keyboard shortcut to toggle between the master and the master.
    how can I customize the default adjustments. I'd like the sharpen option to be an option every time.
    For any brick, you can option-click on the "gear" icon and either "add to default set" or "remove from default set" depending on its current state in the default set. So, once you add the sharpen brick to a photo, option-click and add it to the default set.
    nathan

  • ¿can i remove all my contents and adjustments without remembering my icloud and find my apple password?

    i just dont know if i can, i dont remember my 'find my iphone' password in my iphone because is an old mail, and that mail is already sing up in my iphone but i cant remember and i cant delete that icloud mail without a 'find my apple' password, so i need to change that icloud mail, but im asking if i remove all of the information, ¿that old  icloud mail will gone?, and so i can sing up with a new mail, or if i remove it, that old mail ¿will stay there?, ¿will it ask for my forgotten password? please help!

    You can't transfer any content from one account to another account (nor can accounts be merged) - all content will remain tied to the account that downloaded it.
    Do you not have copies of all of your downloads e.g. on your computer or backup of your downloads/library ? Whilst you are in Australia you can't redownload your UK purchases (you have to be in a country to use its store), if you have them on your computer's iTunes library then you should be able to stream them from it to your Apple TV

  • [js] [cs2] Remove all baseline shift

    Hi,
    Does anyone know how to remove all baseline adjustments of all text in all frames of an entire document. All text must be set on 0 baseline.
    How to go trough every character of every paragraph of every textframe on every page in the current document.
    Many thanx on your input...
    Tim

    Tim,
    Use:
    app.documents[0].stories.everyItem().baselineShift = 0;
    Dave

  • How do I remove all sound from my original clips?

    I've recently bought iMovie and am trying to get some editing done. I'd like to remove all the sound from my original clips and only have the music track I've added as background music, I've watched the tutorials and tried adjustments but alas, nothing seems to work, where am I going wrong?

    First you must drag the clips to a project. The event clips will always have the original audio.
    In the project, select one of the clips and open the inspector to the Audio tab. Set the volume slider to zero.
    You can repeat this for all the clips, or here is a shortcut.
    Do the first one, then with it still selected, click EDIT/COPY, then EDIT/SELECT ALL, then EDIT/PASTE ADJUSTMENTS.../AUDIO ADJUSTMENTS.

  • Firefox hangs on opening requiring force quit I have snow leopard mac It hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise m

    Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
    == This happened ==
    Every time Firefox opened
    == I tried to update firefox add-ons ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    Try a new profile. See [[Recovering important data from an old profile]]

  • I recently ran monolingual and removed all but the intel-64 bit architectures.  Now my iphoto will not open.  Here's the message  that I get. Process:         iPhoto [3543] Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto Identifier:

    I recently ran monolingual and removed all but the intel-64 bit architectures.  Now my iphoto (along with Idvd, garage band, imovie) will not open.  Here is the message that I get.
    Process:         iPhoto [3543]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         ??? (???)
    Build Info:      iPhotoProject-4750000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [109]
    Date/Time:       2011-06-10 21:48:59.821 -0500
    OS Version:      Mac OS X 10.6.7 (10J869)
    Report Version:  6
    Interval Since Last Report:          -4164908 sec
    Crashes Since Last Report:           8
    Per-App Crashes Since Last Report:   11
    Anonymous UUID:                      45357CCD-011B-482E-A2EA-CF42096F1321
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
      Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
      Reason: no suitable image found.  Did find:
              /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
              /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
    Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13
    Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
    Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    Serial ATA Device: ST31000528ASQ, 931.51 GB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0608, 0x24300000
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8502, 0x24400000
    USB Device: External HDD, 0x1058  (Western Digital Technologies, Inc.), 0x0901, 0x26400000
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0x26500000
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0x06110000

    Please let me know when you find a fix. I did the same thing and have tried every suggestion I can find online. The message I get is...
    Process:         iPhoto [4991]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         ??? (???)
    Build Info:      iPhotoProject-6070000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [142]
    Date/Time:       2011-06-13 23:39:38.485 +1200
    OS Version:      Mac OS X 10.6.7 (10J869)
    Report Version:  6
    Interval Since Last Report:          -1643976 sec
    Crashes Since Last Report:           35
    Per-App Crashes Since Last Report:   12
    Anonymous UUID:                      D4811036-EA8D-479D-8D9F-11E2FC8F6D4C
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
      Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
      Reason: no suitable image found.  Did find:
              /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
              /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
    Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.36.9)
    Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898, 3.5 GB
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0x26100000
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0x24600000
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06600000
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8213, 0x06610000
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x06500000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0236, 0x06300000
    I have reinstalled Mac OSX 10.6.3 and done the updates from there.
    I have reinstalled ilife 11 from disk and done the updates.
    I have deleted all the suggested files and then redone install and updates.
    I have tried just reinstalling iphoto and doing updates.
    Is there any way to get a replacement -  /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
    file with the right architecture?

  • Family sharing one Itunes account, want to remove all of their computers content from my library... help

    My family shares one Itunes account and I believe it was home sharing that brought all of their music, purchases, movies, etc. onto my Mac's Itunes Library. I want to remove all of their content from it. I turned off Homesharing and that didn't work. All of their music is on my computer and synchs to my Iphone and it's driving me nuts. Please help !

    You can deauthorise all 5 at once, then reauthorize the one you want.
    Learn how to authorize or deauthorize your computer with your Apple ID.
      http://support.apple.com/kb/HT1420
    You need to log into iTunes on the computer you want to deauthorise. Otherwise, contact contact iTunes Store support to see if they can help.

  • I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

    I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
    I have iPhoto version 9.1.5 (615)
    Mac OS X version 10.6.8
    I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
    if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
    if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
    if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
    Any help would be greatly appreciated

    Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
    The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
    For the annoying start-up message:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

  • Trying to install Creative Cloud Desktop on windows 8.1, I've tried everything. Cloud Cleaner, removed all Adobe products from computer, ran in Administrator Deleted everything still get error code 1

    I've tried everything. Cloud Cleaner, removed all Adobe products from computer, ran in Administrator Deleted everything still get error code 1 noting in all the troubleshoots have helped.

    Error Code 1: "Failed to install" | Creative Cloud Desktop :
    https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

  • I am trying to load a movie onto my ipod touch and it is wanting to remove all my apps

    I don't want to remove all my apps.  I just want to load a movie. 

    What exactly happens when you try to redownoad by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    What exactly happens whne you try to download a free app?
    Are the apps "waiting"?
    http://lifehacker.com/5948155/fix-iphone-apps-stuck-waiting-during-installation

  • Need to know how to remove ALL previous Outlook settings in Registry and file locations (cross posted)

    Problem: I cannot get a newly installed Outlook 2013 to connect to the [online Office 365] server with old [non-domain] logon profile. That is my issue, and what I'd like to fix. (There's some services and settings on the old profile
    that cannot be easily duplicated. Also, I'm just enough annoyed by this to ask for suggestions.)
    Background: I upgraded an existing Office 2007 install of several years back to Office 2013 on an continuously used [non-domain] user profile (I needed connections to several Exchange accounts at various domains I remotely admin
    and was tired of logging on through OWA, so it was time to upgrade). Up to Sunday last, I have never had issues with Outlook and Office 365 connections to that account; upgrading Office 2013 "killed" my outlook.office365.com connection to emails.
    Testing: I created a new [non-domain] logon profile, and Outlook 2013 connects to my outlook.office365.com account just fine with the new logon profile. To repeat:
    there were NO connectivity issues in connecting to my Office 365 account in the
    new [test] logon profile with Outlook 2013, and using Outlook 2013 on the new [non-domain] profile.
    The problem is profile specific, to an older existing profile (I'd like to use).
    Just FYI: my [vanity] domain tests just fine with the Exchange 365 online tools. Office 365 works. OWA works. Outlook 2013 works (in the new logon profile). Mobile devices work.
    There are no major problems with the domain name in MXToolbox, or Microsoft Remote Connectivity Tester. Both Windows and Office are fully patched on my workstation. There's no malware.
    The problem is something in my older logon profile. Something somewhere locally to that logon and/or Outlook-specific profile is keeping it from logging into the [Office 365] mail server. I just get the typical "cannot connect to
    the server" error.
    What's Needed: So what I need is a link to a webpage (or pages) that details ALL [existing] Outlook/Exchange settings that are profile specific ...so I can
    manually remove them from the Registry, from the drive, etc.
    ...something on the order of "...remove all profiles under
    HKCU\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem" and "...delete all files in
    C:\Users\username\AppData\Local\Microsoft\Outlook" (neither of which fixed the issue, whatever the real issue may be ...but that's all I found so far that seemed pertinent). Anyways, "stuff"
    like that.
    Alternatively, if someone knows what Registry keys, other settings, etc., I can export/import from the test logon profile to my "real" logon profile(s), that would be worth a shot, and greatly appreciated.
    Or maybe just some google search suggestions that might find the above links (listing error message contents hasn't been useful: too many hits).
    Me: I'm a sys admin with over 30 years experience. I'm not looking for suggestions on how to set up an Exchange account, or an Office 365 account, or to setup a new mail profile or logon profile (or to remove either of those), or to add
    a new email account (manually or with auto-discover), or to remove an old account. None of that applies and/or has worked in this case.
    Thanks in advance for your interest. I really need a knowledgeable wizard, since I'm looking for a solution to a complex issue. My own googling and troubleshooting has just turned up the usual noob' stuff. At this point, I'm at a loss. The well is dry.
    Update:
    This question is cross-posted from the general "answers" forum (at the suggestion of a moderator).
    Update: I also came across
    this page of "advanced" Outlook settings (and it hasn't helped so far, either).

    I too, for over 30 days have been trying to find an answer as my situation is as similar as it gets.  I too have tried all and everything as you have.
    How I wish there would have been an answer to your question.  It would have answered mine as well.
    Seems typical to microsoft "help" unless it is the usual noob response and/or "more clarification" (I with no tech degree understood exactly what you refer to) the only response is well, just no response......

  • I got an iPhone 4 a week ago. I synced my iTunes once and now I want to change what albums and playlists are on my phone. When I try to do this, iTunes threatens to remove all my apps. Of course, Apple's support is no help.

    I got an iPhone 4 a week ago. I synced my iTunes once and now I want to change what albums and playlists are on my phone. When I try to do this, iTunes threatens to remove all my apps. Of course, Apple's support is no help. I know there has to be a way to add and remove whole albums and playlists like on the music tab on the device, so please don't tell me to uncheck/delete everything from my iTunes that I don't want and re-sync. That is not helpful and not the issue. How do I get around it threatening to remove all my apps?

    On the MacBook, go to System Preferences > Security & Privacy > Privacy > Advanced > Disable remote control

  • Can't Login to SharePoint as an invited External User / Can't Remove All Traces of External User with Microsoft Account

    Hi TechNet,
    I have an MS SharePoint Online (SharePoint Plan 2) team site, quite simple, one document library etc.
    I have successfully added all users (E3) within the organisation to groups, and permissioned correctly.
    I have added myself (separate organisation, also Office 365 E3) as an External User, and have access to the website without any problems by authenticating with my Organization account e-mail address.
    I have a single user (separate organisation, also Office 365 E3), who's setup is identical to mine (Also Office 365 E3).
    However, when this user is added as an External User, they are unable to login, and get "Sign In is not complete":
    That didn't work
    We're sorry, but [email protected] can't be found in the CLIENT1.sharepoint.com directory. Please try again later, while we try to automatically fix this for you. 
    Correlation ID: dc1f7f9c-092b-20b8-7b35-89348ba22f71
    Date and Time: 3/20/2014 7:06:55 AM
    URL: https://CLIENT1.sharepoint.com/
    User: [email protected]
    Issue Type: Partner User Invalid.    
    I then remove the user using the Site Collection, and using the PRofile Manager, and using Remove-SPOUser, and using Remove-SPOExternalUser. Which is great, he's gone. However when I go to add him back to a group, as soon as I type his e-mail address, it
    'Resolves' into his full name! If I have completely(?) removed him form the site, how is he being resolved? And therefore me trying to remove him to re-add him to try and solve the user/directory/auth issue is not working.
    Furthermore, upon clicking on said client's username inside SharePoint (after I've 'added him back' of course), his ID, in format: i:0#.f|membership|live.com#[email protected] has an entirely different e-mail address, his Microsoft Account! 
    I'm assuming he must have been already signed into his Microsoft Account when he clicked on the External User e-mail invite? If so, I clearly do not want this, how can I remove lal traces of his Microsoft Account, given that I have gone to the lengths as
    detailed above?
    I have already completed these steps: http://community.office365.com/en-us/forums/148/p/228263/709905.aspx
    Some possible further reading regarding Microsoft ID's and Organization ID's:
    http://sergeluca.wordpress.com/2013/09/23/sharepoint-online-and-external-users-this-invitation-has-already-been-accepted-with-another-account-bug-or-feature/
    Please let me know if you need any more information regarding this issue, and thanks in advance to anyone who can shed some light on this situation for me and anyone whom encounters it in the future.
    Regards,
    Evanly.

    Hi Scott,
    Thank you so much for taking the time to read and respond to my issue.
    Certainly, it makes sense that regardless of where the invitation it sent, the user would authenticate with their Microsoft ID.
    In my case, I want the user to authenticate using their Microsoft Organisation ID, that they use for their seperate Office 365 account.
    This is the way I was able to log in, and worked great. With my client, they are unable to access Sharepoint because once they sign in with their Microsoft Organisation / Office 365 ID, they are told they are not in the directory, because their Microsoft
    ID is in the directory and it doesn't match up.
    I am simultaneously trying to 1) Remove all traces of this users Microsoft ID, which so far using the above steps, has been unsuccessful; and 2) Invite the user using his Microsoft Organisation ID, and have him authenticate with that (which is proved to
    work, as my account uses this).
    Looking forward to any more suggestions. Thanks in advance!

  • Cannot secure delete items from trash: 180 items (pictures, files, folders) remain even if I check "remove all items"

    I cannot secure delete items from trash: 180 items (pictures, files, folders) remain even if I check "remove all items".  Macbook Pro, 10.6.8

    Maybe the items are locked.
    Mac OS X 10.6 Help: Shortcuts for working with items in the Finder
    Shortcuts for working with items in the Finder Command (⌘)-Shift-DeleteEmpty the Trash without any warning or when it contains locked filesCommand (⌘)-Shift-Option-Delete
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/cdb_cpmvfky.html

Maybe you are looking for