Remove all of one color, is this possible?

I have a photo of an army battalion from 1980 and it has little orange spots in random places all over the photo. It looks like it got sprayed with orange soda. Is there a way to remove the orange without removing each one one at a time? Any suggestions would be great, I will try ANYTHING! Thanks!

Here you go, well, you get the idea although it is quite pixelated once I converted it down to lower res. The orange spots don't obscure the picture but my client wants them all removed, especially on the faces. Any thoughts? Thanks!
http://www.pixentral.com/show.php?picture=1RqQpkBvxrCRy5jhTxRjFMQxGJbmZ1

Similar Messages

To remove all of one color in an image on Elements 5.0

Hi. I've got a sprite sheet with a Bright green background and I use the Magic wand tool but then there's areas that still have some green in them in the sprites and I don't want to have to keep using the magic wand tool over and over again. Please help me out.

Stick, assuming the Replace Color function is available in PSE5 (I have PSE6), it should do the trick. Go to Enhance>Adjust Color>Replace Color...Make sure Preview is checked so you can see the immediate results. Select the middle (+) eye dropper and click on the green background of your image. Move the sliders in the Replacement box to get the background you want. For example, move the Lightness slider all the way to the right for a white background. Continue to click the areas you want to replace if necessary.

I have upgraded my computer to program the MAC OS X but would like to remove this update and revert to the old one. Is this possible and how do I proceed?

I have upgraded my computer to program the MAC OS X but would like to remove this update and revert to the old one. Is this possible and how do I proceed?

Not easily, unless you backed up your data.
Did you? If not, let that be a lesson to never install anything without a backup:
https://discussions.apple.com/docs/DOC-1992
https://discussions.apple.com/docs/DOC-1948

How can i add a wireless printer HP officejet 6310 all in one? is it possible

How can i add a wireless printer HP officejet 6310 all in one? is it possible..?

Hi @millep
To answer your question, no the Officejet 2620 is not a wireless printer;
- Source: Printer specifications
As for the USB cable, personally, I believe the intention is to bring down the cost of the printer by selling the USB cable separately. Many people already have printer USB cables kicking around the house, so instead of paying more for the printer and having an extra cable I believe the theory is reduce the cost and sell the USB separately for those who need to purchase one.
I hope this answers your inquiry.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I'd like to copy my workout DVD's on my mac, then play them on my Apple TV so I won't wear them out and have to buy new ones. Is this possible?

I've recently purchased some workout DVD's and was wondering if I can copy them to my mac, then watch them on my Apple TV so I don't wear the DVD's out and have to buy new ones. Is this possible?

so I don't wear the DVD's out and have to buy new ones.
DVD's do not wear out from being played. Nothing makes any physical contact with them to cause any wear.
And yes you can "RIP" a DVD and add it to iTunes which would let ATV play them.   You will need to Google RIPPING DVD though for details. It violates the terms of service for the forum to talk about it here.
And in response to Rudder'scomment ALL DVD's are encrypted.   That is why you need HandBreak (and VideoLan) to decrypt them.

I am considering buying Acrobat 11 Prio on a monthly subscription but I would like to use it on more than one machine is this possible?

I am considering buying Acrobat 11 Prio on a monthly subscription but I would like to use it on more than one machine is this possible?

You are allowed to have two working installations so if you want to have it on two machines you can. If you want it on more than that then you need to manage which ones are working at any given time such that only two are usable.

Officejet pro 8600 plus e-all-in-one color managment problem.

please help, I'm a photographer and I own officejet pro 8600 plus e-all-in-one printer. I want to print my photos using this printer, but it never print them right, so I bought Colormunki photo to calibrate my monitor and my printer and match them together. The problem is I can't control the printer color management !!! I want to disable it, so I can use the printer profile in Photoshop or other applications to get the right prints. my prints are darker when I set the color management to be handled by the application, or I make the printer handle it but I will end up with wrong colors. I really really need to change the profile of the printer. how ?????? otherwise I really have no use of it in my work.

Jassim,
Kudos to you for figuring out how to better control the outcome for what you require.
I have learned something new today. Smiling!
Did you create the new profile manually or add it in from a previously saved setting? Filename / filetype?
It has been a while since I used Photoshop. I am thinking I may take another look at my old favorite.
Edits << 27-Dec-2014 >> Added the following links:
Profile Support Center
How to use ICC color printer profiles for inkjet printers
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

HP 8500 All In One COLOR print issues

My all in one will not print in color, I have just replaced all of the cartridges and even ran a TEST page and all other available diagnostic functions with no success. I also checked the print options to be sure COLOR was selected and everything including the print test comes out in BLACK only. Even the color level test prints in BLACK for all cartridges ...
Any suggestions on this issue.
I have tried printing documents from Word, Publisher and every other program with no success.
Thank you!
Glen Bigness, P.A. Realtor

hi,
It seems to me that there could be a problem with the Magenta/Cyan Printhead of your printer. Try to perform the steps of cleaning the contacts of the printhead and of the printer, click here. After cleaning the contacts, try to print a diagnostic page to see if your printer will now print color. If issue persisted, then i believe you need to replace the Magenta/Cyan printhead.
Contact HP tech support at 1-800-474-6836 for any suggestions regarding this matter, they might be able to replace the printhead of your printer if your machine is still under warranty.
Hope these would help you!
Kiko

8500 all in one color not correct!

my red color is pink

Hey @big-bob1,
Welcome to the HP Support Forums!
I understand that you're experiencing a print quality issue when printing from your Windows 7 to your HP Officejet 8500 series printer. I would like to assist you today with resolving this quality issue. However, in order for me to provide you with accurate troubleshooting steps today I do need to verify which Officejet 8500 series printer you have:
1) HP Officejet Pro 8500 All-in-One Printer Series - A909
2) HP Officejet Pro 8500A e-All-in-One Printer Series - A910
If you're not sure which series of printer you have, please click here for instructions on how to locate your printer model number.
In the meantime, you will need to follow the Print Quality troubleshooting steps to resolve this issue. Once you determine which Officejet 8500 series machine you have, please follow the appropriate Print Quality troubleshooting steps below.
If you have the HP Officejet Pro 8500 All-in-One Printer A909 Series, please click here and run through the quality troubleshooting provided.
If you have the HP Officejet Pro 8500A e-All-in-One Printer A910 Series , please click here and run through the quality troubleshooting provided.
Please respond to this post with the result of your troubleshooting. Should the issue persist, be sure to include you exact printer model number in your response. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP 4385 all in one returns message "This device not configured for networking"

This happens just after the point in the install when I have attached USB and wireless data seemingly has been transferred to the Printer. This all started when I needed to do a re-install after a Vista upgrade.
I did reset the printer to Factory settings. I am using latest install software from HP Site. I have tried to resolve this with HP CHAT with no luck. Obviously I have tried this install several times now I even tried it with the printer within inches of my router.
Help Please

Print a Wireless Test from the front of the printer. It will self-test the components of the printer, including its radio.
1. Press the Wireless button on the front of the HP All-in-One.
2. Press the button next to the icon on the display until Wireless Network Test is highlighted, and then press the button next to OK. The Wireless Network Test prints.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Forward all ports using ssh - is this possible?

consider the following situation: port 22 and 80 are open but most of the other more or less useful ports are closed.
i'd like to automatically route all traffic through my ssh connection (preferably without having to mess around with proxy settings).
is this possible using ssh?

thanks for your replies and sorry for my late answer
i did know about the -D flag (using it regularly to login to ICQ/MSN from my workplace), but i don't want to alter proxy settings for all apps using the internet.
i did read up on vpn over ssh, but it seemed a bit too much work, considering i'm not strictly limited to ssh. it's my own server so i could set up openvpn/xxx on it.

HT2731 I would like to have a Canadian itunes account, and a UK one. Is this possible?

I have a Canadian iTunes account, but now live in the UK so would like to have a UK one. I don't, however, want to give up using my Canadian one. Is it possible to have both at the same time?

Not without an address and credit card in both locations.

I want to buy a new 27in iMac and I want to transfer all my photo and music from my old iMac to the new one. Is this possible?

I am going to purchse a new 27in iMac. I have a 21 inch single core intel chip iMac purchased in 2006. I want to transfer my music from iTunes (3600 songs) and my photos from iPhoto (28000). Can this be done without using an external hard drive? I backed up all my songs from iTunes but I have yet to understand how they show up on the hard drive. Before you all criticize me, I am a 72 year old lady who is limited in my ability to understand technical data but have been able to use a computer for some time now.

Yes. OS X: How to migrate data from another Mac using Mavericks

Can I transfer iTunes/App store purchases from 1 Apple ID to another? I have recently parted from my partner, everything was purchased under his but I now want to move it all to mine. Is this possible?

Please help.

On the premise that an application is irrevocably tied to an Apple ID it was purchased from, I want to pose another scenario similar to the original question of this post.
A small business purchased a Mac for a specific purpose. Given that no one in the business is savvy enough for Mac systems, they hire a consulting IT. IT then sets up the Mac and all the apps that came with it (and here's where the problem starts) under his Apple ID. Now that the IT consultant no longer services the business, he takes with him the rights for two apps, specifically iPhoto and iMovies, at the business' expense. He also needs to remove the Mac that's tied to his Apple ID but that's only secondary issue as admin rights on the device was retained. Two generations of OS X's later, with the current update Yosemite, those two programs are now inoperable. One might suggest to call back the IT and update the programs himself but that's beside the point. Terms and conditions were set to protect these apps from unlawful sharing, but in this case, an application was purchased by a user not using his own finances.
It's no longer a question on whether we could move an application from one Apple ID to another but I wish Apple can find a way to protect their consumers from unethical practices such as this.
Thank you.

Multiple transform/assigns for one variable - is this possible?

Hi,
What I am trying to do is read in a complex XML file. Transform some data, add some other data from another source and update a table in the database with all data.
So currently I read in the XML file.
Do one big transform to map the majority of data to the input variable of my database adapter.
I then call a stored procedure to get some ID values.
I have then been trying to add these ID's to the input variable of my database adapter. Tried both transform and assign, but these seem to overwrite the big transform which I previously did.
Is it possible to update the same variable in more than one transform without overwriting the values set previously?
Thanks in advance for any help

Hi Marc,
Thanks for your help.
I've tried playing around with the <bpelx:insertAfter> command referring to your Blog.
I have a couple of questions, perhaps you could help me with them.
1. I noticed that once I have added this command into the .bpel file I get an error within the designer view. Is this to be expected or am I doing something wrong?
2. Is it possible to specify the XML tag which is used and also use an XPath query?
The code I have added is as follows:
<assign name="Assign_GlobalsToInsert">
<bpelx:insertAfter>
<from variable="InvokeGlobalsGetGlobalsOutputValue"
part="outputParameters"
query="/ns1:outputParameters/GET_VALUE"/>
<to variable="ReceiveFileReadInputVariable"
part="DATA_FILE"
query="/ns3:DATA_FILE/ns3:DataLine/ns3:FinalLine"/>
</bpelx:insertAfter>
</assign>
When I tested this it did add and element with the correct value as expected, however the XML tags were <GET_VALUE> as specified in my query section of the from command. Is there anyway to use a different value for the tags?
I currently get <GET_VALUE>99</GET_VALUE>
I would like to use <TRANS_ID>99</TRANS_ID>
Thanks very much for your help

Remove all of one color, is this possible?

Similar Messages

Maybe you are looking for