Remove an incident from a case?

I accidentally assigned two incidents to the wrong case. I see where I can clear the "Included" box on the case for those incidents so they don't appear when I view the case document, but there doesn't appear to be any way to fully de-assign the incidents from this case. Am I missing something, or can't this be done? Thanks.

You'll get better help with video questions in the Premiere Elements forum. Not many of us here use it:
http://forums.adobe.com/community/premiere_elements

Similar Messages

  • Phone hangs up when removing from holster case

    Hi, whenever i receive an incoming phone call and i remove my 8830 from the clip-on hoster case, the phone call is "missed" because likely a key is pressed, or the track ball. How can i set the phone such that when a call comes in, i can remove the phone from the case without it hanging up on the person? thanks, chris

    Try changing your phone general options to set the Auto End Calls to Never, and possibly Auto Answer Calls to un-holster .  You might be triggering an accidental 're-holster' signal as you pull it out.
    posted by DigitalFrog
    WARNING: May contain traces of nuts.

  • FSCM-DM: Removing invoices from dispute case

    Hi all,
    I'm trying to remove an invoice from an Dispute Case but i'm receiving the error message UDM_MSG015 ("You cannot change this system node manually").
    Is it possible to remove an invoice from an Dispute Case ?
    Best Regards,
    Bruno Sousa

    Hi all,
    Many thanks for your feedback.
    So, as far i understood, after installing EhP2 and activating the business functions:
    - FSCM Functions (FIN_FSCM_CCD)
    - FSCM Integration (FIN_FSCM_INTEGRATION)
    I will be able to remove the a specific invoice from a dispute case.
    Just another question. These business functions seem to be valid also to FSCM-CR (Credit Management) but we don't want to activate the FSCM-CR and we want to continue using FI-AR-CR.
    Does the activation of these business functions also activate the FSCM-CR ? Because that will turn off the FI-AR-CR and we don't want that..
    Best Regards,
    Bruno Sousa

  • Remove Templates from Create Incident From Template Selection

    Originally all users had access to all of the templates created, however now that we have been using SCSM for a while the number of templates created has started to grow and make the Create Incident From Template Screen difficult to navigate.  I am
    trying to limit the number of templates each team sees based on security group, however when I uncheck the templates from the Form Templates section of the User Role, they continue to display for all users.  Is there somewhere else I have to go in and
    change this that I am missing?

    Hi,
    Take a look at this thread:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/d0b64ab8-ea5a-4426-968e-77675193473f/hiding-templates-from-console-users-while-still-effectively-using-the-end-user-role?forum=administration
    (By default the End User role has access to all templates, and the members of that role is Authenticated Users)
    Regards
    //Anders
    Anders Asp | Lumagate | www.lumagate.com | Sweden | My blog: www.scsm.se

  • Remove null values from query

    Hi All;
    Below is my query and the output and i need to remove null values from the output
    Any help regarding same is much appreciated
    Thanks
    ; WITH CTE AS
    select a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid,c.contactid,c.fullname,a.new_mainprogramme_idname,
    a.new_subprogramme_idname,
    a.owneridname,
    a.new_dateofapplication,count(appt.activityid) as NoOfAppointments,
    ap.scheduledstart,
    ap.scheduleddurationminutes
    from opportunity a
    left join contact c on (c.contactid = a.parentcontactid)
    inner join activitypointer ap on ( ap.regardingobjectid = c.contactid )
    inner join appointment appt on (appt.activityid = ap.ActivityId)
    where
    appt.new_didmeetingtakeplace = 1
    and appt.statecode = 1 and
    (a.SCRIBE_DELETEDON is null and c.SCRIBE_DELETEDON is null and ap.SCRIBE_DELETEDON is null and appt.SCRIBE_DELETEDON is null)
    group by a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid, c.contactid,c.fullname,a.owneridname,
    a.new_mainprogramme_idname,a.new_subprogramme_idname,
    a.new_dateofapplication,ap.scheduledstart,
    ap.scheduleddurationminutes
    union
    select a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid,c.contactid,c.fullname,
    a.new_mainprogramme_idname,a.new_subprogramme_idname,a.owneridname,
    a.new_dateofapplication,count(appt.activityid) as NoOfAppointments,
    ap.scheduledstart,
    ap.scheduleddurationminutes
    from opportunity a
    left join contact c on (c.contactid = a.parentcontactid)
    inner join activitypointer ap on (ap.regardingobjectid = a.opportunityid)
    inner join appointment appt on (appt.activityid = ap.ActivityId)
    where
    appt.new_didmeetingtakeplace = 1
    and appt.statecode = 1 and
    (a.SCRIBE_DELETEDON is null and c.SCRIBE_DELETEDON is null and ap.SCRIBE_DELETEDON is null and appt.SCRIBE_DELETEDON is null)
    group by a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid,c.contactid,a.owneridname,
    a.new_mainprogramme_idname,a.new_subprogramme_idname,
    c.fullname,a.new_dateofapplication,
    ap.scheduledstart,
    ap.scheduleddurationminutes
    CTE2 As
    select opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,
    new_mainprogramme_idname,new_subprogramme_idname,cte.owneridname,
    ac.new_businessstartdate,new_dateofapplication,(NoOfAppointments),
    case when ac.new_businessstartdate > = CTE.scheduledstart
    then (CTE.scheduleddurationminutes) end as PreStartHours,
    case when ac.new_businessstartdate < CTE.scheduledstart
    then (CTE.scheduleddurationminutes) end as PostStartHours
    pp.new_outputs,
    case when po.new_outputsname = 'Pre Start Assist'
    then 'Yes' else 'No' end as Precheck,
    case when po.new_outputsname = 'Business Assist'
    then 'Yes' else 'No' end as Buscheck
    from CTE
    join account ac on (ac.accountid = CTE.parentcustomerid)
    join dbo.new_programmeoutput as po on (CTE.opportunityid = po.new_relatedopportunity)
    join dbo.new_programmeprofile pp on (
    po.new_mainprogrammeid = pp.new_mainprogrammeid and
    po.new_subprogrammeid = pp.new_subprogrammeid
    and pp.new_claimstartdate = po.new_claimdate
    and pp.new_outputsname = po.new_outputsname)
    where (ac.SCRIBE_DELETEDON is null)
    group by opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,ac.new_businessstartdate,new_dateofapplication,NoOfAppointments,
    scheduledstart,new_mainprogramme_idname,new_subprogramme_idname,cte.owneridname,scheduleddurationminutes
    select opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,
    new_mainprogramme_idname,new_subprogramme_idname,cte2.owneridname,
    new_businessstartdate,new_dateofapplication,(NoOfAppointments),
    PreStartHours, PostStartHours,po.new_programmeoutputid,
    case when (new_outputsname) = 'Pre Start Assist'
    then 'Yes' else 'No' end as Precheck,
    case when (new_outputsname) = 'Business Assist'
    then 'Yes' else 'No' end as Buscheck --po.*
    from cte2
    left join dbo.new_programmeoutput as po on (cte2.opportunityid = po.new_relatedopportunity)
    where po.new_claimmonthidname is not null and po.statuscode_displayname = 'claimed'
    group by opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,
    new_mainprogramme_idname,new_subprogramme_idname,cte2.owneridname,
    new_businessstartdate,new_dateofapplication,(NoOfAppointments),
    PreStartHours, PostStartHours,po.new_programmeoutputid,new_outputsname
    --where new_claimmonthidname is not null --and CTE2.PreStartHours is not null and CTE2.PostStartHours is not null
    Pradnya07

     i need to remove null values from the output
    Hello,
    What exactly do you mean with "remove", to filter the rows out from result set or to replace the null value by an other value e.g. 0? This can be done with the
    ISNULL function:
    ISNULL(case when ac.new_businessstartdate > = CTE.scheduledstart
    then (CTE.scheduleddurationminutes) end, 0) as PreStartHours, ...
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • How do you remove a symbol from the stage in Edge animate?

    Hello-
    I'm wondering how to remove a symbol from the stage in Edge Animate so you can jump to another place in the timeline.  In Flash, the symbol was only on the stage for the amount of frames you indicated.  Not sure how it works here.
    For example, I have 2 buttons on my first screen with some text that animates in.  I want the button click to take the user to another section in the timeline or (basically another scene, like in Flash)  that contains different content.  If I change the visibility the buttons are still there and will ( I assume) create problems when other elements are placed on top. 
    Or is the only way with code.  If that is the case what would that code be?
    I would appreciate any help.
    Thank you!

    What I usually do, is, once you have everything set up in the scene you are done with. highlight it all
    right click
    group elements in DIV
    Now all those items act as 1 group and then you give it a properties name, much like a symbol.
    THEN you can refer to that scene name and move it anywhere or hide it and slide in another scene that has the content for that next scene.
    basically you take all the elements that make up 1 scene, gruop it up, name it, and then in the code for the button say something like:
    on click:
    scenename.play(framenumber);
    that will then animate that scene according to any animation you gave it, such as moving to the left, off stage. while moving scene 2 that you create into the stage.
    or just have something like this hide it
    sym.$("scenename").hide();
    sym.$("scene2name").show();
    but if you do that, make sure in your CompositionReady code you hide all scenes EXCEPT the 1st one, so the user doesnt see them all instanatly anyway.

  • Remove Blank Values from Slicer in Power View

    Hi all,
    I am trying to create a power view report from a power pivot data model. After creating the model when I try to use the slicer in power view I am seeing the Blank record. Then I checked that dimension in model where I don't have any blank value in there.
    Also I checked in fact table where it has a relationship with that dimension and I don't see any blank value there as well.
    I am currently blocked with this issue. Experts please jump in and give some ideas how to remove blank value from there.
    Thanks

    As MM-99 already stated correctly, the BLANK-member is created if there is one or more non-matching row in your fact-table that does not exist in the dimension-table
    maybe you have some issues with upper and lower case?
    or maybe there are some whitespace characters contained in the text?
    to identify the issues you may want to create a calcuated column in your fact-table as =RELATED('DimTable'[MyKeyColumn])
    then you can filter on that column and see if any blank values appear
    hth,
    gerhard
    Gerhard Brueckl
    blogging @ http://blog.gbrueckl.at
    working @ http://www.pmOne.com

  • How to remove a device from my adobe id counter?

    Hello together,
    I use my sony ereader with my adobe id for several years now, and have already used three different pc's with this same id to load my ebooks to the reader. Since the number of devices that can be registered with the same id is limited to 6, I really need to remove the id from two of these pc's that are not alive anymore to register a new device. How do I do that?

    If you still have the old devices/computers you can deregister them.
    For a computer running ADE, ctrl-shift-D (cmd-shift-D on Mac)
    For an ereader device, connect it to a computer running ADE, then ctrl-shift-E (cmd-shift-E on Mac)
    For a tablet, find instructions for the app you are running.
    Unfortunately, deregistering does not always free up the slot to allow for more devices as is should.
    In that case ...
    ~
    Adobe Live Chat: http://www.adobe.com/support/chat/ivrchat.html,
    or as a slight short cut try http://helpx.adobe.com/contact.html?product=digital-editions&topic=using-my-product-or-ser vice
    Click on 'I still need help' and then you should see 'Chat with an Agent' at the bottom of the page.
    'Ask our experts' will indeed just lead you back to this forum.
    Sometimes you will get ‘Sorry! All agents are busy— please check back soon.’
    Don’t refresh the page, just hang on and it should eventually go to ‘Chat Now, and agent is available’.
    They can reset your authorizations, and then you must reauthorize any devices you still need.
    (Unfortunately, Adobe haven’t got round to an admin website for viewing and editing authorizations.)
    Some of the representatives haven't been properly trained and don't know what to do (and claim there is nothing they can do);
    in that case the only way seems to be to give up that chat and try another session hoping for a properly trained representative.
    If your problem is with another device using Overdrive, Bluefire, Aldiko or similar third party app, it is recommended not to mention that app when on the chat, just mention that you have run out of authorizations  (E_ACT_TOO_MANY_ACTIVATIONS) .  Thanks to AJP_Bear for that tip.

  • Removing extra spaces from a long document

    Hello
    I have seen a number of find/change and GREP formulas to do similar things. I have NO scripting or coding experience and have labored to understand GREP.
    So I am a little afraid to use it as I don't know what all the modifiers refer to (I do have a printout of some neat GREP cheatsheets like Mike Witherell's that I can absorb until I obtain a good reference )
    I need something I can copy and paste into either find/change or GREP dialog that will do the following in less than 12 steps (hopefully) without doing something catastrophic like removing all of my paragraph marks (which I almost did using someones GREP expression)
    No spaces before any comma, period, exclamation mark, question mark, colon, semicolon
    One space only after any of those
    One Space before any opening parenthesis and one space after the closing parenthesis
    No space after the opening parenthesis or before the closing parenthesis
    Remove any double or extra spaces ( en, em etc.)
    Remove any commas before parentheses
    Remove any spaces after a paragraph mark
    I think that's it
    I did find this one recently (Maybe Jongware?)
    [~m~>~f~|~S~s<~/~,~3~4%]{2
    Which from my dim understanding addresses em, en, flush and hair space ,  nonbreaking space ,figure space,third space--not sure of the rest. Really this is way over my head.
    I know this will be a piece of cake for you guys
    Thanks

A: Removing extra spaces from a long document

Peter is too modest, he's doing just great.
No space BEFORE-One Space after ---period,semicolon,colon, exclamation, question mark,CLOSING Parenth,Bracket,Brace, single & Dbl. quotation marks
Find (\s)([.,;:!\)\]\}~}~]])
Replace with $2
No space AFTER-One Space Before----OPENING bracket,brace,parenthesis,Dbl & single quotes
Find ([\[\{\(~{~[])(\s)
Replace with $1
These remove the space before/after but do not automatically add a space after/before.
In the first case, you could add a space right after the '$2' in the Replace With string, but it already may have a space, in which case you suddenly have two. One alternative is to optionally remove it with the Find string (add it as an optional match) and always add it with the Replace string, but remember that this string will only be found if there is a space preceding it. That way you'd only check the space after in cases where there was a bad space before.
So I propose you add another two find/changes to add the space, only when necessary.
One Space After: find
([.,;:!\)\]\}~}~]])(?!\s)
replace:
$0 [followed by one single space]
One Space Before: find
(?<!\s)([\[\{\(~{~[])
replace:
[one single space] $0
Color-coding with my WhatTheGrep might make it just a tad clearer what's going on in that jumble of codes:
(1 [ .,;:! \) \] \} ~} ~] ] 1) (?!! \s !)
and
(?<!<! \s <!) (1 [ \[ \{ \( ~{ ~[ ] 1)
(Orange is lookahead/lookbehind, blue is a regular escaped character, pink is an InDesign special character, green is normal grouping parentheses, and lavender is a character group.)

Peter is too modest, he's doing just great.
No space BEFORE-One Space after ---period,semicolon,colon, exclamation, question mark,CLOSING Parenth,Bracket,Brace, single & Dbl. quotation marks
Find (\s)([.,;:!\)\]\}~}~]])
Replace with $2
No space AFTER-One Space Before----OPENING bracket,brace,parenthesis,Dbl & single quotes
Find ([\[\{\(~{~[])(\s)
Replace with $1
These remove the space before/after but do not automatically add a space after/before.
In the first case, you could add a space right after the '$2' in the Replace With string, but it already may have a space, in which case you suddenly have two. One alternative is to optionally remove it with the Find string (add it as an optional match) and always add it with the Replace string, but remember that this string will only be found if there is a space preceding it. That way you'd only check the space after in cases where there was a bad space before.
So I propose you add another two find/changes to add the space, only when necessary.
One Space After: find
([.,;:!\)\]\}~}~]])(?!\s)
replace:
$0 [followed by one single space]
One Space Before: find
(?<!\s)([\[\{\(~{~[])
replace:
[one single space] $0
Color-coding with my WhatTheGrep might make it just a tad clearer what's going on in that jumble of codes:
(1 [ .,;:! \) \] \} ~} ~] ] 1) (?!! \s !)
and
(?<!<! \s <!) (1 [ \[ \{ \( ~{ ~[ ] 1)
(Orange is lookahead/lookbehind, blue is a regular escaped character, pink is an InDesign special character, green is normal grouping parentheses, and lavender is a character group.)

  • I cannot remove embedded barcode from the image. Due to saving compression.

    Hi guys,
    I recreate a thread to prevent confusing on my previous one. Please only reply to this thread thanks.
    Ok, for a start I will give some general description about the application I made.
    I had some problem with the image being compressed while it is saved.
    Because saving an image will cause it to compress and had its pixel valued changed, I could not successfully remove the bardcode that is embedded inside a image(although some of the pixel value will be returned to original normally). I had placed my code below and will accept any opinion that will help me solve the removal of barcode problem.
    What my application does is actually very simple. It will take the pixel value of the area inside the image that will be embed with the barcode first, then it will take the pixel value of the barcode and use the formula (1-alpha * Image pixel value) + (alpha * barcode pixel value) = new pixel value which will contain the barcode that had been embedded inside. The formula works great but when I saved the image the pixel value will change due to compression. On the removal of barcode my application will read every pixel value from the image embedded with barcode (only the area with barcode embedded), then it will go on to read every pixel value of the barcode used for embedding and then use the formula (Embedded image pixel value - (alpha * Barcode pixel value) - (1 - alpha) = original pixel value. But due to the reason that compression will change some of the pixel inside the saved image to drop in its value, the result from the removal formula will be negative and hence caused my result image to become wierd as it will red colors instead of original color on some of its pixel. I tried saving under PNG format which people said to be lossless compression but the result is still the same.
    So I need to ask you guys for opinion or help me find the part where I actually did wrongly and caused the image pixel value to change.
    Thanks. Please proceed and read below for the codes that I used. It is messy and I will sort it out later.
    When alpha is set as 1 the barcode will appear to be overwrite onto the image. But when alpha is set as 0.1 the barcode will appear to be transparent and almost seems to be not there on the image when embedded.
    This is the code I used to retrieve image pixel when embedding:
    public static int[] getImagePixelValue(BufferedImage image, int x, int y){
              //Create an array to store image RGB value
              int[] imageRGB = new int[3];
              //Get height and width from input image
              int imageWidth = image.getWidth();
              int imageHeight = image.getHeight();
              //Get raw RGB value from image
              int imageValue = image.getRGB(x, y);
              //Convert image raw RGB value
              int imageRed = ((image.getRGB(x, y) >> 16) & 0xff);
              int imageGreen = ((image.getRGB(x, y) >> 8) & 0xff);
              int imageBlue = image.getRGB(x, y) & 0xff;
              //Input the converted RGB value into the array
              imageRGB[0] = imageRed;
              imageRGB[1] = imageGreen;
              imageRGB[2] = imageBlue;
              /*//Print out the pixel value to check
              System.out.println("Image red pixel: "+imageRGB[0]);
              System.out.println("Image green pixel: "+imageRGB[1]);
              System.out.println("Image blue pixel: "+imageRGB[2]);*/
              //Return image RGB value
              return imageRGB;
    }This is the code I used to retrieve barcode pixel for embedding:
    public static int[] getWatermarkPixelValue(BufferedImage watermark, int x, int y){
              //Create an array to store watermark RGB value
              int[] watermarkRGB = new int[3];
              //Get height and width from input watermark
              int watermarkWidth = watermark.getWidth();
              int watermarkHeight = watermark.getHeight();
              int watermarkValue = watermark.getRGB(x, y);
              //Convert watermark raw RGB value
              int watermarkRed = ((watermark.getRGB(x, y) >> 16) & 0xff);
              int watermarkGreen = ((watermark.getRGB(x, y) >> 8) & 0xff);
              int watermarkBlue = watermark.getRGB(x, y) & 0xff;
              //Input the converted RGB value into the array
              watermarkRGB[0] = watermarkRed;
              watermarkRGB[1] = watermarkGreen;
              watermarkRGB[2] = watermarkBlue;
              /*//Print out the pixel value to check
              System.out.println("Watermark red pixel: "+watermarkRGB[0]);
              System.out.println("Watermark green pixel: "+watermarkRGB[1]);
              System.out.println("Watermark blue pixel: "+watermarkRGB[2]);*/
              //Return watermark RGB value
              return watermarkRGB;
         }This is the code I used for merging the image pixel and barcode pixel to get the embedded pixel value:
    public static int[] getEmbeddedPixelValue(int[] imagePixelValue, int[] watermarkPixelValue, double alpha){
              //Create a object to hold embedded pixel value
              int[] embeddedRGBValue = new int[3];
              //Change image pixel value into double calculating equation
              double imgRedValue = (double) imagePixelValue[0];
              double imgGreenValue = (double) imagePixelValue[1];
              double imgBlueValue = (double) imagePixelValue[2];
              //Change watermark pixel value into double calculating equation
              double wmRedValue = (double) watermarkPixelValue[0];
              double wmGreenValue = (double) watermarkPixelValue[1];
              double wmBlueValue = (double) watermarkPixelValue[2];
              //Equation for embedding image and watermark together
              double embeddedRed = ((1.0 - alpha) * imgRedValue) + (alpha * wmRedValue);
              double embeddedGreen = ((1.0 - alpha) * imgGreenValue) + (alpha * wmGreenValue);
              double embeddedBlue = ((1.0 - alpha) * imgBlueValue) + (alpha * wmBlueValue);
              //Changing embedded value from double to int
              int embeddedRedValue = (int) embeddedRed;
              int embeddedGreenValue = (int) embeddedGreen;
              int embeddedBlueValue = (int) embeddedBlue;
              //input the embedded RGB value into the array
              embeddedRGBValue[0] = embeddedRedValue;
              embeddedRGBValue[1] = embeddedGreenValue;
              embeddedRGBValue[2] = embeddedBlueValue;
              //Return embedded pixel value
              return embeddedRGBValue;
         }This is the code where I used for the embedding process:
    else if(target == embedButton){
                   String xCoordinate = JOptionPane.showInputDialog(embedButton, "Enter coordinate X", "When you want to embed the watermark?", JOptionPane.QUESTION_MESSAGE);
                   String yCoordinate = JOptionPane.showInputDialog(embedButton, "Enter coordinate Y", "When you want to embed the watermark?", JOptionPane.QUESTION_MESSAGE);
                   int xValue = Integer.parseInt(xCoordinate);
                   int yValue = Integer.parseInt(yCoordinate);
                   int wCounter = 0;
                   int hCounter = 0;
                   //Create file object to be used in embedding and removing watermark
                   File inputImage = new File(imagePath);
                   File inputWatermark = new File(watermarkPath);
                   //Convert string into double for calculation of embedded pixel value
                   try {
                        alphaDouble = Double.valueOf(alphaValue).doubleValue();
                   catch (NumberFormatException nfe) {
                        System.out.println("NumberFormatException: " + nfe.getMessage());
                   try{
                        //Define selected image as testPic and make java read the file selected
                        BufferedImage image= ImageIO.read(inputImage);
                        BufferedImage watermark= ImageIO.read(inputWatermark);
                        BufferedImage testing;
                        //Get height and width value from the selected image
                        int imageWidth = image.getWidth();
                        int imageHeight = image.getHeight();
                        //Get height and width value from the selected barcode
                        int watermarkWidth = watermark.getWidth();
                        int watermarkHeight = watermark.getHeight();
                        int totalWidth = watermarkWidth + xValue;
                        int totalHeight = watermarkHeight + yValue;
                        //Use nested for loop to get RGB value from every pixel that the barcode will be embedded in the selected image
                        if(totalWidth <= imageWidth && totalHeight <= imageHeight){
                             for (int h = yValue ; h < totalHeight; h++){
                                  for (int w = xValue; w < totalWidth; w++){
                                       int[] imagePixelValue = getImagePixelValue(image, w, h);
                                       int[] watermarkPixelValue = getWatermarkPixelValue(watermark, wCounter, hCounter);
                                       int[] embeddedPixelRGBValue = getEmbeddedPixelValue(imagePixelValue, watermarkPixelValue, alphaDouble);
                                       setRed(image, w, h, embeddedPixelRGBValue[0]);
                                       setGreen(image, w, h, embeddedPixelRGBValue[1]);
                                       setBlue(image, w, h, embeddedPixelRGBValue[2]);
                                       wCounter++;
                                       if(wCounter == watermarkWidth){
                                            wCounter = 0;
                                            hCounter++;
                        else{
                             JOptionPane.showMessageDialog(embedButton, "The watermark cannot be embedded at the coordinates.");
                        tempImage = image;
                        imageIcon = new ImageIcon(tempImage);
                        labelImage.setIcon(imageIcon);
                        imagePanel.add(labelImage);
                        container.add(imagePanel, BorderLayout.CENTER);
                        setVisible(true);
                        System.out.println("Embedding completed");
                   catch(Exception errorEmbedding){
                        //If there is any error, the try and catch function will tell you the error
                        System.out.println("The following error occured: "+errorEmbedding);
              }This is the code I use to save the image that had been embedded with the barcode:
    else if(target == saveAction){
                   JFileChooser chooser = new JFileChooser();
                   FileNameExtensionFilter filter = new FileNameExtensionFilter("JPG & GIF Images", "jpg", "gif");
                   chooser.setFileFilter(filter);
                   chooser.setCurrentDirectory(new File("."));
                   int returnVal = chooser.showSaveDialog(getParent());
                   if(returnVal == JFileChooser.APPROVE_OPTION) {
                        String name = chooser.getSelectedFile().getAbsolutePath();
                        //Create a string instant to hold outputImage path name
                        String saveFile = chooser.getSelectedFile().getName()+"."+fileType;
                        //Create file output to decide what name will be used to save the file
                        File outputImage = new File(saveFile);
                        try{
                             //Save the file with the name used
                             ImageIO.write((RenderedImage) tempImage,fileType,outputImage);
                        catch(Exception errorSaving){
                             //If there is any error, the try and catch function will tell you the error
                             System.out.println("The following error occured: "+errorSaving);
                   else{
              }This is the code I used for removal process of barcode:
    else if(target == removeButton){
                   //Create file object to be used in embedding and removing watermark
                   File inputImage = new File("removalTesting.jpg");
                   //File inputWatermark = new File(watermarkPath);
                   //Used a defined barcode for testing of removing barcode from embedded image
                   File inputWatermark = new File("barcode.jpg");
                   /*//Convert string into double for calculation of embedded pixel value
                   try {
                        alphaDouble = Double.valueOf(alphaValue).doubleValue();
                   catch (NumberFormatException nfe) {
                        System.out.println("NumberFormatException: " + nfe.getMessage());
                   //Used a defined alpha value for testing of removing barcode from embedded image
                   //alphaDouble = 0.5;
                   //Create x and y value for the starting coordinates of barcode embedded in the embedded image
                   int xValue = 0;
                   int yValue = 0;
                   int wCounter = 0;
                   int hCounter = 0;
                   try{
                        //Define selected image as testPic and make java read the file selected
                        BufferedImage image= ImageIO.read(inputImage);
                        BufferedImage watermark= ImageIO.read(inputWatermark);
                        //Get height and width value from the selected image
                        int imageWidth = image.getWidth();
                        int imageHeight = image.getHeight();
                        //Get height and width value from the selected barcode
                        int watermarkWidth = watermark.getWidth();
                        int watermarkHeight = watermark.getHeight();
                        int totalWidth = watermarkWidth + xValue;
                        int totalHeight = watermarkHeight + yValue;
                        //Use nested for loop to get RGB value from every pixel that the barcode had been embedded in the embedded image
                        if(totalWidth <= imageWidth && totalHeight <= imageHeight){
                             for (int h = yValue ; h < totalHeight; h++){
                                  for (int w = xValue; w < totalWidth; w++){
                                       int[] imagePixelValue = getImagePixelValue(image, w, h);
                                       int[] watermarkPixelValue = getWatermarkPixelValue(watermark, wCounter, hCounter);
                                       int[] removedPixelRGBValue = getOriginalImagePixelValue(imagePixelValue, watermarkPixelValue, alphaDouble);
                                       setRed(image, w, h, removedPixelRGBValue[0]);
                                       setGreen(image, w, h, removedPixelRGBValue[1]);
                                       setBlue(image, w, h, removedPixelRGBValue[2]);
                                       wCounter++;
                                       if(wCounter == watermarkWidth){
                                            wCounter = 0;
                                            hCounter++;
                        tempImage = image;
                        imageIcon = new ImageIcon(tempImage);
                        labelImage.setIcon(imageIcon);
                        imagePanel.add(labelImage);
                        container.add(imagePanel, BorderLayout.CENTER);
                        setVisible(true);
                        System.out.println("Embedding completed");
                   catch(Exception errorEmbedding){
                        //If there is any error, the try and catch function will tell you the error
                        System.out.println("The following error occured: "+errorEmbedding);
              }Sorry if the codes are in a mess, I did not had the time to sort it out yet but most likely do it when I got the removal of barcode done.
    Follow this link to have a look of the result I see in my application when I got the barcode embedded into the image I selected:
    [http://img356.imageshack.us/my.php?image=beforeremovalresultmg2.jpg]
    Follow this link to have a look of the result I see in my application after I got the barcode removed:
    [http://img523.imageshack.us/my.php?image=removalresultmx4.jpg]
    As you can see from the link, after I remove the barcode from the image. Some of the pixel actually went back to normal in the barcode area when the the barcode is embedded into the image. But some pixel in the barcode area had its value changed due to compression when I save the image file I think.
    Anyone can help me find out the problem?
    Thanks.

    KamenRider wrote:
    I suspect the problem lies in the code when I save the image. Because people said that PNG was loseless compression but when I saved in PNG some of the pixel went back to normal while some did not. This is obviously the cause from changing of pixel value when I saved the image.You are almost certainly wrong. This is trivially easy to check. Print out the color of a certain pixel immediately before you save it. Open the saved PNG in your favorite image manipulation program and check the saved value of that same pixel. When you re-load the saved PNG, print out the color again. It should be unchanged.
    Thanks you for trying to help me spot the problem but the formula is correct. The alpha value i used in my application is used to set the transparency of the barcode that will be embedded in the image. Hence, when alpha = 1 the new pixel value should be the barcode value. ^^The formula isn't wrong, it's just not doing what you think it's doing. Remember that you're working with ints here, not floating point numbers, so they have finite precision. When you case from double to int, fractions are dropped. As morgalr pointed out, your formula is:
    (1-alpha * Image pixel value) + (alpha * barcode pixel value) = new pixel value You didn't show us the code for getOriginalImagePixelValue but I imagine it's:
    original pixel value = (new pixel value - alpha * barcode pixel value) / (1 - alpha)On a piece of paper, take alpha = 0.9, image pixel = 17 and barcode pixel = 100. Calculate out what you should get for new pixel value and then calculate what you should get for original pixel value. You will find they don't match.

  • I want to remove the VMware from my iMac intel will this remove the wind7 also cleanly ?

    Hi, I know where to go uninstall the VMware (fusion),  im just concerned that if i remove VMware it wont remove the windows7 cleanly, I never actually use it, someone thought it would be a good idea for me at the time, as I was new to Mac, well I had no issues with getting along with mac I was among some of the first to have computers in the schools, things are very similar so I never required the use of it.
    Also I'm wanting to know what happens to my VMware, as I didn't install it myself just wondering if I can  remove it from the trash and burn it to a cd ? for use at a later time, or would it be simpler and easy to just remove windows and leave the VMware Fusion installed,  if so how much room is VMware using. I would really like to claim back that extra memory for use with my iMac.
    I Thought It would be best to ask some advice before I make a silly mistake. So any info regarding this matter would be helpful thanks
    OS X
    Version 10.8
    Build 12A269
    Processor 2.66 GHz Intel Core 2 Duo
    Memory 2 GB 800 MHz DDR2 SDRAM

    Thank you for that, i am intending to upgrade my memory but not till end of month, So what your saying is to remove the windows from the VMware and if thats the case may I ask how i would do that. Sorry I just dont want to make a mistake and regret it later. Thanks for your help and advice Samberl awesome

  • How do I move my large iTunes collection from a case-sensitive hard drive to a case-insensitive hard drive?

    I currently keep my iTunes media on an external hard drive because it takes up too much space on my machine. I recently discovered that it was formatted as case-sensitive when I bought it, and now months later I'm having issues. When attempting to back up my files on a case-insensitive hard drive, the operation failed due to conflicting file/folder names (Artist and artist are now considered the same file name and one would have to overwrite the other). I now have a large iTunes file collection that is stuck on the case-sensitive hard drive, and I want to save a backup on a case-insensitive drive. 
    Is there a way to identify all cases where multiple files/folders have the same title/album/artist but different spelling so there will be no conflicts? The folder/file names would have to be crossed referenced to highlight any cases where File/fiLe/file  would cause a problem.
    I imagine there is a way to do this using iTunes script or Automator  or a command in terminal or something rather than going through and checking/fixing all the information for thousands of songs by hand. I'm at the limits of my minimal development skills, so any help would be appreciated.

    You should be able to use either "Carbon Copy Cloner" or "SuperDuper" (free for this purpose) to copy your case-sensitive volume to an empty case-insensitive one. Make at least two such copies on different drives. One is not enough to be safe.
    If there are any name conflicts—that is, files in the same folder with names that differ only in case, such as "File" and "file"—then you will either get an error or one of the files won't be copied. You must ensure either that no such conflicts exist, or that the consequences are not important. How you do that is up to you. Unless you went out of your way to create conflicts, they probably don't exist.
    Then erase the source volume in Disk Utility as case-insensitive. This action will remove all data from the volume.
    Restore from one of your backups using the same application you used to create it, or use the "Restore" feature of Disk Utility, which will be faster. Search its built-in help for the term "duplicate" if you need instructions.

  • How do I remove padlock icon from all my files?

    On one of my drives, every single file has a little padlock icon superimposed over the file icon. I recall when I did a clean install of windows 7 RC over my Vista install, I wasn't getting write access to the drive so I had to take ownership of the drive and mess with the security settings before it started working normally.
    I have to admit, I find the security settings in all versions of NT mystifying... For instance, although my account is in the administrators group, having full access to administrators never seems to work. I always have to add my individual user account and explicitly give it full access.
    In any case, I can't remember exactly what it took, but after messing around with the security settings for a while, I eventually was able to have full access to the drive and have no problems reading/writing/deleting files and folders, but there's the padlock icon still on everything.
    Can anyone explain how to get rid of it, and/or maybe point me to a good, clear, understandable guide on how to properly set NTFS permissions.
    Thanks!

    <form id="aspnetForm" action="edit" enctype="application/x-www-form-urlencoded" method="post">
    <input id="__VIEWSTATE" name="__VIEWSTATE" type="hidden" value="/wEPDwULLTEzNzk0MzkwMDlkZD6SorGRLWx4w+alHb7GRMyulXR+" />
    </form>
    Windows Client TechCenter
    <input id="SearchTextBox" class="TextBoxSearch TextBoxSearchIE7" name="SearchTextBox" type="text" /><input id="SearchButton" class="SearchButton" name="SearchButton"
    src="http://i1.social.microsoft.com/globalresources/Images/trans.gif" type="image" /> 
    Sign out
    United States (English)
    Australia (English)Brasil
    (Português)Česká republika (Čeština)Danmark
    (Dansk)Deutschland (Deutsch)España
    (Español)France (Français)Indonesia
    (Bahasa)Italia (Italiano)Magyarország
    (Magyar)România (Română)Singapore
    (English)Türkiye (Türkçe)Россия
    (Русский)ישראל (עברית)المملكة
    العربية السعودية (العربية)ไทย (ไทย)대한민국
    (한국어)中华人民共和国 (中文)台灣
    (中文)日本 (日本語)香港特別行政區
    (中文)
    ZYBORG
    Resources for IT Professionals
    HomeWindows 7Windows VistaWindows
    XPLibraryForums
    Windows Client TechCenter >
    Windows 7 IT Pro Forums
    > Windows 7 Security
    > How do I remove padlock icon from all my files?
    > a9d3326a-9af4-4d81-9f6e-0df9575b4fea
    <form action="/Forums/en/w7itprosecurity/thread/16474fcf-688b-4eae-88f4-804306bafc0f/a9d3326a-9af4-4d81-9f6e-0df9575b4fea/edit" enctype="application/x-www-form-urlencoded" method="post">
    Edit Message
    <textarea cols="100" rows="20" name="body"><blockquote> <p>Hi,</p> <p>This is a new feature of Windows 7 RC. If a folder's ownership is SYSTEM, the icon would be appears.</p> <p>To
    remove the icon, please change the ownership of the folders. You may refer the following website.</p> <p><a href="http://www.vista4beginners.com/Change-permissions-take-ownership">Change the permissions and take ownership of your
    files and folders&nbsp; Windows Vista for Beginners</a>&nbsp;</p> <p>Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft
    does not guarantee the accuracy of this third-party contact information.</p> <hr> Arthur Xie - MSFT</blockquote> <p>You may call this a feature but I call it rediculous. The security and ownership system deployed in win 7 is beyond
    belief and horribly BAD!</p> <p>I have files which have disappeared from view under start / all programs which are clearly on my system. They can be seen by an administrator only account but not by a users acccount which has administrator privs.
    That really makes great since!</p> &nbsp;Returning to Win XP looks like a good option to me. Anyone who changes the ownership of an entire drive is asking for latent problems when various areas within windows needs ownership of SYSTEM or Trustedinstaller
    and others which were overwritten with the change.</textarea>
    <label for="hasCode">Resource.HasCodeLabel</label><input name="hasCode" type="checkbox" value="true" /> <label for="reason">Reason</label><input name="reason" type="text"
    />
    <input title="Submit" type="submit" value="Submit" />
    </form>
    Need Help with Forums? (FAQ)
    © 2011 Microsoft. All rights reserved.
    Terms of Use|Trademarks|Privacy Statement|Contact
    Us
    <script type="text/javascript"></script> <script type="text/javascript"></script> <script type="text/javascript"></script> <noscript></noscript> <noscript></noscript>
    This forum even has bugs! look at this mess.

  • Remove data plan from family plan with basic phones?

    Is there a way to remove a data plan from a family plan with just basic phones on it? We used to have a $20/month basic plan until we had to get a data plan for our son's iPhone. He no longer has the iPhone with Verizon and has removed his line from the plan because he has an Android with Sprint. We also were required to use the data plan because we at one point had one of those "Hotspot" devices as a temporary solution for at-home Internet until our DSL line could be fixed. As of now we no longer have the hotspot device or the iPhone, but we still have a data plan that is patently useless because all we have are basic phones. On the My Verizon Wireless website, it says that "your text and data are now bundled with your plan" or something to that effect. I don't want to be paying extra for a useless data plan that we don't need or want because we are not in the market for fancy smart phones or tablets any time soon.
    Is there any way to unbundle or detach the data plan so that we no longer have one and just have the unlimited text and calling plan without data? Our daughter is fine with her EnV Touch from 2005 and us old folks are perfectly content with the basic flip phones. Is the EnV a data phone too, in which case we should get rid of the EnV Touch in favor of an even more "basic" basic phone? She's not much of a technology buff like her brother is and has even suggested getting rid of the "fancier" phone that she has for a basic flip phone. Are we stuck with the data plan unless we break everyone off from the family plan (it's just me, my husband, my daughter, and my sister for right now) and move everyone to pay-as-you-go or no-contract? Wouldn't that end up costing more in the long run? How can we get rid of this annoying and expensive data plan that nobody on our network even uses and is causing a headache of expense?

    As I understand the plans now (and this could be wrong, they change so often I get confused!!) to have the "pay as you go" data, on the More Everything, you have 700 shared minutes.  To bump up to unlimited minutes, there is an attached data plan of 500 MB, and the total cost for 4 basic phones, unlimited minutes and text, 500 MB data, is $100/mo  ($20 for each basic phone line access, and $20 for the data).  The 700 shared minutes and pay as you go data is $85.
    You can change your plan at any time.

  • How do I remove old applications from my new Macbook Pro that came over when the data on my iMac was migrated to the new computer.

    How do I remove old applications from my new Macbook Pro that were part of the data that was migrated over from my older iMac?
    Thanks

    If the applications were originally drag and drop installations you can simply drag them to the trash and empty. If they were installed by an installer there should be an uninstaller included. If you're not sure you should check with the software developer for instructions. In this case Google can be your friend.

    • Maybe you are looking for