Remove an oracle home entry from the central repository

Does anyone know how to remove an oracle home entry from the central repository (inventory.xml file), after the oracle home in question has been deleted. It is left behind and I want to clean it up.
thanks

I went to the link you have posted and it did not help me.
I cannot get rid of my Oracle Home directory. When I attempt to delete this folder, I
get an error message:
oci.dll ...is write protected or in use..
So I deleted this oci.dll file. Then I rebooted and tried to delete the OraHome directory (folder)
again, and I get the SAME error!!
Thanks for any advice.

Similar Messages

Remove a sleep log entry from the Lifelog

Is it possible to somehow remove a sleep log entry from the Lifelog?
I have an incorrect entry messing up my average value so I would like to get rid of it.
Solved!
Go to Solution.

It is possible to remove a single sleep activity. You scroll in the timeline to the activity you like to remove, then press the avatar while it’s sleeping. You will get a pop-up with sleep details for this specific sleep activity, press the trash can symbol and remove this activity.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

HOWTO remove an entry from the node list...

Hi all,
does anybody know, howto remove an entry from the node list TAB ?
I recentyl updated my system to 11.5.10.2 including enabling autoconfig.
Now, concurrent processes won't start, because of two entries in the node list tab (yes, it's a single node installation!). There are two entries, one with the IP-address and one with the hostname.
Can somebody tell me howto remove this obsolete entry?
Thanks.

1) Login as APPS user to SQL*Plus
2) Issue the following:
SQL> EXEC FND_CONC_CLONE.SETUP_CLEAN;
SQL> COMMIT;3) Run AutoConfig
For more details, please refer to:
Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1

Removing the following prohibited entry from the EAR:

I have a Fusion Application and I am using jdeveloper 11.1.1.4.0.
If I make an Application Module Service Enabled by adding a Service Interface custom method
I cannot deploy the application to the embedded weblogic because
some jars are removed automatically
Removing the following prohibited entry from the EAR: lib/trinidad-api.jar
Removing the following prohibited entry from the EAR: lib/trinidad-impl.jar
and then I get
java.lang.ClassNotFoundException: org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl
Why is this happening? An why is this happening only when I add a Service Interface custom method
Any help appreciated.
Regards

Hi Frank
Unfortunatelly this didn't work.
If I deploy the application by using the Application Menu / Deploy / Application to IntegratedWebLogicServer the deployment succeeds with no issues
On the other hand if I hit RUN on the ViewController I get
Caused By: java.lang.ClassNotFoundException: org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl
I also believe this is a misconfiguration issue but I cant find it yet
and this only happens if I add a custom method in the Service Interface of the Application Module.
If I remove it everything is back to normal
I found another post with a very similar issue but it has not been resolved
https://kr.forums.oracle.com/forums/thread.jspa?threadID=2217152
Edited by: spooker on 31 Μαϊ 2012 12:36 μμ

Delete all entries from the following tables - Follow-up Activities (oracle)

Hello,
I performed a homogeneous system copy of our development BW system with the database (oracle 11.2.0.3) from the BW production system!
I already start the oracle database and the SAP system in the target system/server (development BW system) and I´m doing some follow-up activities. One of this activities is (at the system copy guide 6.2.3.2 Activities at Database Level) is to delete all entries from the following tables:
DBSTATHORA, DBSTAIHORA, DBSTATIORA, DBSTATTORA
I tried to delete them using SQL Plus:
sqlplus /nolog
SQL> connect /as sysdba
SQL> delete from DBSTATTORA;
delete from DBSTATTORA
ERROR at line 1:
ORA-00942: table or view does not exist
... and it show me that error message.
This is strange because when I go to transaction SE14 and check the DBSTATTORA I see that table exist and contain a lot of entries!
Why this is happened in SQL Plus!? I´m running the correct SQL statement for doing this type of task or not?
How can I delete the entries of that tables? Can I do that using the transaction SE14?
Can you help me please?
Thank you,
samid raif

Hello
sqlplus /nolog
SQL> connect /as sysdba
SQL> delete from DBSTATTORA;
delete from DBSTATTORA
ERROR at line 1:
ORA-00942: table or view does not exist
It doesn't surprise me as you are not mentioning the schema name here. Instead it should be
delete from SAPSR3.DBSTATTORA;
Assuming the schema owner is SAPSR3. if the owner is different then replace that with the correct one.
Regards
RB

Re:How can we delete the concurrent node entry from the FND_NODE table

HI ,
11.5.10.2 on Oracle Solaris on SPARC (64-bit) .
How can we delete the concurrent node entry from the FND_NODES table without running Autoconfig.
Currently we are having 3 nodes RAC and we are deciding to remove one node from the RAC and all 3 nodes are registered as concurrent node with application but concurrent manager is running only on one node.
Lot of the custom configuration we did it at application web tire level. If we run the Autoconfig at that time we need to redo those changes again that we are trying to avoid.
Regards .

we are trying to avoid to run FND_CLONE.setup_clean because it will delete all the nodes entries from the FND_NODES.If those entries are invalid then they should be deleted.
Running AutoConfig after purging the table will populate it with the correct entries.
In order to populate the nodes entries again we need to run autoconfig and it will change the server id in fnd_nodes and then we need to redo the ADI client configuration on users PC and redo all the changes that we made in jserv and webserver.For ADI Clients, you should use the correct server ids which will be populated in the table for you once you run AutoConfig.
For jserv configuration, you can refer to (Customizing an AutoConfig Environment [ID 270519.1]) to make the preserve all your custom setup/configuration after running AutoConfig.
If there any custom script to delete only one node from the fnd_node so that we don't need to run autoconfig after that, then I really appreciate.No.
Thanks,
Hussein

Unable to start Oracle Process Manager from the windows services for OBIEE

Hi,
I have OBIEE 11g installed on a 32-bit windows machine. Of the two windows services installed, I am unable to start the Oracle Process Manager. When I try to start it I get the following error:
Error 1053: The service did not respond to the start or control request in a timely fashion.
At the back end, this service is calling the file opmn.exe which is placed at MIDDLEWAREHOME\Oracle_BI1\opmn\bin. On trying to execute this file the error we get is:
The procedure entry point longjmp could not be located in the dynamic link library orauts.dll
I have tried replacing the orauts.dll file, but to no avail.
Please let me know if you have any clue regarding what is to be done.
Thanks
Naman

Hi Naman,
This error occurs for the following reasons,
*Path variable is not set properly
*Multiple Oracle homes exists in the same machine.
Follow the below steps and let me know if it works,
1. Select My Computer -> Right Click -> Properties
2. In the System Properties screen go to Advanced Tab
3. Click on Environment Variables
4. In the System Variables section select PATH variable & Click edit
5. Now you will find that it will contain invalid directories. Remove the incorrect entries. This may happen when you have multiple oracle homes in the same machine
6. Restart the service.
Rgds,
Dpka

Cannot delete users from the Central Management Console

I cannot delete users from the Central Management Console. I'm logged in to Enterprise as administrator but still get the following error:
There was an error while writing data back to the server: Sorry, you do not have the right to 'Delete objects' (id - 22) for 'koberg' (id - 725415). Please contact your system or permissions administrator if you require this right.
Thanks in advance for any help on this matter.

Oops, my mistake, sorry. Ok, so the Administrator cannot delete user koberg.
Check top level:
Logon to CMC, browse to Home > Settings and select the Rights tab. These are your top level settings. Factory default will show only Administrators and Everyone. Select the Net Access "Advanced" for the Administrators group. NB: Do not select these group names links - they will jump you out of the top level! On the Advanced rights page, ensure the right to "Delete objects" is explicitly granted.
Then set for the Users top level folder:
In the CMC, browse to Home, and select Users. Select the "Rights" button. Again - NB: Do not select these group names links - they will jump you out of the Users top level folder! Set the Administrators group to "Full Control". Save.
That should be all you need. However, there is a possibility the previous admin was busy setting security not only at the account level, but on groups so we need to verify the user:
In the CMC, browse to Home, and select Users. In the User list, select koberg. In the koberg account page, select the Rights tab. If the Administrators is not set to (Inherited Rights), make it so, and when you select the "Update" button, you should see the Net Access update to "Full Control". If this is the case, you should follow these steps on each account and accomplish this.
And if you still can't delete it, verify the groups:
In the CMC, browse to Home, and select Users. In the User list, select koberg. In the koberg account page, select the "Member of" tab. Note all groups koberg is a member of. Then in the CMC, browse to Home, and select Groups. Select the name hyperlink for the group(s) that koberg belongs to. On the group page, select the Rights tab, and ensure the Administrators have (Inherited Rights) - Full Control on all of these, also. If not, set it.
Finally, I know you inherited this, but let's overview some basics of simplifying your deployment administration. Follow these guidelines, and your administration life will be so much easier.
1. The Everyone group should never have any subgroups. Ever. All accounts on the system are a member of the Everyone group. Adding subgroups to the Everyone group is redundant.
2. For simplicity's sake, Application level access should be set on the Adminstrators Group, and the Everyone group. I know there are customers who add groups to application rights. I don't understand why users would have an account on the system if they are not allowed access to InfoView, but it's your system.
3. From a report object perspective, the Everyone group should be set at the top level to "No Access". This will result in them having no rights on anything at all. You break this inheritance at the application level to give them access to InfoView and other apps. On folders and objects, you ADD groups, then assign (ADD) rights as desired.
4. If you can help it, never explicitly deny a right to any user or group for any object or application. Explicitly deny overrides any other setting. If a user belongs to group A and group B, and group A is explicitly denied a right, you can explicitly grant it for group B or the user all day long, and it will still be denied. Always try to put yourself in the position of adding groups/users, and adding rights, then inheriting as far down the folder tree as you can.

HT201317 My husband bought an Ipad 3. He gave me his Ipad 2. How do we get home movies from the 2 to the 3? I want to restore the 2 to the factory settings, but not lose these movies.

My husband bought an Ipad 3. He gave me his Ipad 2. How do we get the home movies from the 2 to the 3? I would like to restore the 2 to factory settings. As I understand, from reading "help", videos are NOT in the Photo Stream.

1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

Is it possible to remove an action log entry from a ticket?

Hello.
Is it possible to remove an actoin log entry from a ticket. We may run into a situation when confidential data has been pasted into the action log.
Thank you,
Richard

Yes, but not through the UI. the easiest way to do this would be with
SMLets.
Import-Module SMLets
$IRClass = Get-scsmclass Workitem.Incident$
$SRClass = Get-SCSMClass Workitem.ServiceRequest$
$ActLogRelationshipClass = get-scsmrelationshipclass System.WorkItem.TroubleTicketHasActionLog
$IR = Get-SCSMObject -Class $IRClass -Filter "Name -eq 'IR21'"
$ActionLogs = Get-SCSMRelatedObject -SMObject $IR -Relationship $ActLogRelationshipClass
Foreach ($ActionLog in $ActionLogs) {
if ( $ActionLog.Description -match "TEST") {
Remove-SCSMObject $ActionLog -Force -WhatIf
It should be noted that this will not remove the action log form the data warehouse. there isn't a supported method to edit data in the DW, so you're kinda on your own if you need to remove this data from the historical records

How to remove app designer migration access from the Developer id

Team,
Please guide me with steps to remove app designer migration access from the Developer id.
I want that developer can create the project but do not have migration access.
Rgds,

Did you already remove the other permission lists/roles you identified in your previous response like I told you to do in my first response? The user can have no permission lists that grant this access. Working with a clone of VP1 is a bad strategy. Security should be handled from the bottom up, adding what is required for a user to perform their necessary functions. Cloning VP1 and removing roles/permissions is security from the top down and will undoubtedly leave you with a user that is still granted more access than you like even after removing this particular access. You should really be working with your companies security admin on this, they may have a standard way of doing this. Many places I've been use custom roles and permission lists when deviating from the Oracle delivered security.
Does ABC user still have any access to UPGRADE?
select ru.roleuser, ru.rolename, rc.classid, ai.barname from psroleuser ru
join psroleclass rc on ru.rolename = rc.rolename
join psauthitem ai on ai.classid = rc.classid
where ai.menuname = 'APPLICATION_DESIGNER'
and ai.barname = 'UPGRADE'
and ru.roleuser = 'ABC'

Removing an Oracle Home

What is the best way to remove an Oracle Home?
After removing all the products in a Home, I want to remove this Oracle Home. I can do it by editing the Windows Registry, but I don't think it's safe.

It would have been safer to use the Oracle Home Selector ( software ) developped by Oracle that allows to remove or properly delete the Home.
It however worths to use it even if all your files have manually been deleted.
Vincent

HT204266 How can I remove my credit card information from the app store?

How can I remove my credit card information from the app store? I would like to have an account without the credit card information.
I would like to put in my credit card only when I am ready to purchase.

On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link. If you are doing it on your phone then tap on your id in Settings > iTunes & App Store and tap 'View Apple ID' on the popup - that should also give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918
If you don't get the 'none' option on the payment details screen then do you owe iTunes anything or have any pre-orders/subscriptions due : http://support.apple.com/kb/TS5366 ?

Error in creating New Entry from the Client in NW Mobile 7.1

Hi All,
I have created a mobile application for Laptops in NW Mobile 7.1.
I have a requirement to create an entry from the client, i.e., I need to create a PR in the client. The model bindind, the backend adapters, bapi wrappers are in place.
I have used the standard create BAPI for PR and wrapped it in a BAPI wrapper. I just have to give the PR details and save the entry in the client. The BAPI wrapper has the logic for generating the new PR number.
My problem here is, when I try to create a new PR, give the details and save, the entry is not getting updated in the backend and the sync state is '201'.
I checked the "Message Monitoring" in the NW Mobile Administrator for the particular SWCV.
For this create PR transaction, the particulars are as below
Message State: Error - Stop Flow
Message Type: Transaction
Error: "Error occurred while fetching synckeys from table ZDOE01700000SL"
"ZDOE01700000SL" is the Sync key look up table for PR(my data object).
Please let me know where I have gone wrong and guide me in rectifying this problem.
Thanks and Regards,
Sunil

Hi Sunil,
From my understanding, looks like you are not filling synckey when you are creating a PR in your client. Synckey is a unique key on the DOE using which you can uniquely identify any node.
There are two scenario's atleast as I know, where this error would have come.
Case 1. If you are modifying something on client, which has been send by DOE, then you are not supposed to change synckey because it is a primary key. Now if we assume that you are not modifying synckey but when you are sending an update, check if by any chance the synckey is not going to DOE which is one case, and the second one is, after DOE has end that record to client, someone has cleaned up all the tables on DOE for that dataobject or someone has deleted that entry on the backend because of which the entry has been deleted on DOE. In either case, you are modifying something on client which is actually not present on DOE because of which when the DOE tries to look up based on synckey it doesn't find the needed record.
Case 2. If you are creating something on client, then you are supposed to create a synckey which is a 32 bit character GUID. I think in your case, you are missing the synckey when you are sending it to DOE. Check if there is any API for doing that or you have manually create a GUID and send it.
Hope it works out.
Best Regards,
Siva.
PS: Reward with points if you find the post useful.

Error while reading file entries from the database

Hi there,
We are running a instance of xmii 12 in a VM (VMware) and after somebody shutdown the host machine without shutting down the VM (great idea isn't it?) we keep getting this message when trying to access xMII:
"Application cannot be started.
Details: com.sap.engine.services.deploy.container.ExceptionInfo: Error while reading file entries from the database."
Any clue? Any suggestion on how we can recover from that?
Thanks a whole lot,
Dom
Server log:
#1.5 #000C29A3B1F20002000000C400000F2800044829A35270F8#1205243578005#/System/Server##com.sap.engine.services.dbpool.deploy.ContainerImpl####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.dbpool.deploy.ContainerImpl#Plain###DataSources or DataSource aliases of 'sap.com/tcmonitoringsysteminfo' application started successfully.#
#1.5 #000C29A3B1F20002000000C500000F2800044829A3527A6C#1205243578005#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###application [] Start of application [sap.com/tcmonitoringsysteminfo] finished successfully on Web Container.#
#1.5 #000C29A3B1F20002000000C600000F2800044829A3527DB5#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
Operation startApp over application sap.com/tcmonitoringsysteminfo finished successfully on server 305221750#
#1.5 #000C29A3B1F20002000000C700000F2800044829A3527E03#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
Operation startApp on application sap.com/tcmonitoringsysteminfo finished on current cluster node for 221 ms.#
#1.5 #000C29A3B1F20002000000C800000F2800044829A3528B49#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Error#1#com.sap.engine.services.deploy#Plain###Error occurred while initially starting application sap.com/xappsxmiiear:Error while reading file entries from the database.#
#1.5 #000C29A3B1F20002000000CA00000F2800044829A352922B#1205243578015#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###The synchronization of applications with DB completed for 39304 ms.#
#1.5 #000C29A3B1F200040000000200000F2800044829B290A4F8#1205243834341#/System/Server/SLDService##com.sap.sldserv.DataCollector####n/a##0da42150ef7311dcb908000c29a3b1f2#SAPEngine_System_Thread[impl:5]_7##0#0#Warning#1#com.sap.sldserv.DataCollector#Plain###Communication configuration is incomplete. No data transfer possible until corrected.#

Well thanks for the hint. Actually, the DB was up but corrupted. I managed to solve the bug by re-deploying xMII (using the SDM tool) which kept all my data but redeployed both the config db of (x)mii and the class files.

Remove an oracle home entry from the central repository

Similar Messages

Maybe you are looking for