Remove and install dial plan installer - the effects on route patterns etc

Hi All,
I am hoping someone could answer this one for me quickly.
I have a scenario during an refresh upgrade to CUCM 10.5(2) where it fails in the install logs with "component_install:807, failed to refresh_upgrade Infrastructure_post components | <LVL::Critical>".
The fix to this may be that I need to uninstall the AUNP dialplan before upgrading.
See (https://supportforums.cisco.com/printpdf/12334191)
What is the effects on route patterns etc when removing the AUNP dial plan?
Will the configuration be maintained and become operable once I upgrade and re-install the AUNP?
Thanks in advance
Kent

Check your database replication status, this might help:
https://supportforums.cisco.com/docs/DOC-13672
HTH,
Chris

Similar Messages

  • Get , remove and install the spusersolution again using powershell if solution exists already

    hi,
    i want to know how can i write in my powershell script:
    if spusersolution exists on the soutions gallery in my site collec , i want to uninstall this and re-install again
    $solutionIS = $sandboxSite | Get-SPUserSolution | where-object {$_.Name -eq $solutionName}
    aftre this, how can i check whether this exists , if exists i want to remove and install and activate this again.
    else if it doenst exists, i want to deploy directly.

    Hi, You can use the following. Please let me know how that goes:
    if([bool($solutionIS = $sandboxSite | Get-SPUserSolution | where-object {$_.Name -eq $solutionName}))
    #It exists, so remove it
    Remove-SPUserSolution $solutionIS
    #install the solution again.
    Install-SPUserSolution "some solution"
    i
    Nico Martens
    SharePoint/Office365/Azure Consultant

  • How do I remove server os and install normal os?  The computer has never been used as a server.  I only purchased the server version because of two internal hard drives.

    How do I remove server os and install normal os?  The computer has never been used as a server.  I only purchased the server version because of two internal hard drives.

    If you want to just disable the Server aspect, this should work for both Lion and Mountain Lion...
    http://support.apple.com/kb/HT4827
    If you want to completely start over, backup your /Users and /Applications directories and re-install the client OS.

  • ITunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more

    iTunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more.
    can you please help, as I also tried to re-install it but pr

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • Have a new computer and will I my adobe photoshop elements 12 downloading and installing, do you have the setup for me.

    I have a new computer and will I my adobe photoshop elements 12 downloading and installing, do you have the setup for me
    I see only photoshop elements 13
    Thanks

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed  and then a second message the " select driver not found(-10202). my interface is a apogee duet

    after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed  and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

    YES!!! YES!!! YES!!!
    I got it!!! Yes!!!
    Guys, I've solved my problem about that error -10202 (Selected driver not found).
    I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
    That file is called "U.S. - International.rsrc" and it's stored in the following path:
    "Macintosh HD/Library/Keyboard Layouts"
    So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
    That's the clue!
    When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
    So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
    I hope I can help all of you.
    Regards,
    Renato Veiga.

  • I have bought a new imac late 2012 and I want to wipe clean my 2008 mac and install Mountain Lion on the old computer for my kids to have

    I have bought a new imac late 2012 and I want to wipe clean my 2008 mac and install Mountain Lion on the old computer for my kids to have.
    What do I need to do?

    Boot your Mac from the System Install DVD that came with it, and erase the HD using Disk Utility. Then, reinstall the OS from the disc. Give the disc to your kids since it must always accompany the Mac it came with.
    After the OS installation is complete and the Mac restarts to begin its new owner setup procedure, just shut down the Mac. Your kids can take it from there.
    If you purchased Lion or Mountain Lion from the App Store, you cannot transfer it. The Apple ID you used to purchase it is required to maintain and / or reinstall the OS. Unless you want to supply your own Apple ID to your children for their use, they must purchase their own copy of Mountain Lion using their own Apple ID.
    If they do not already have an Apple ID and you want them to have Mountain Lion, you will need to create one on their behalf. This does not change the above procedure - just give them the Apple ID and password you create in addition to the Mac and its discs.

  • Wipe and install OSX Leopard without the disk

    Hi everyone,
    I need to wipe my iMac and reinstall OS X Leopard. I have the install disks, but my CD drive doesn't work and can't read the disk.
    Is there a way for me to wipe and install OSX Leopard without the disk?
    Thanks.

    You can turn the 2011 iMac into a Firewire Optical drive.
    Put the Leo Install Disc into the 2011 iMac, boot the 2011 iMac while holding t key to put it into FW Target Disk Mode, with a FW cable connect the the 2, boot older one holding Alt key, choose the Leo Install Disc to boot from.

  • I've downloaded and installed Lightroom 6. The icon is on my desktop, but it won't open. The older version is still there also, and it works like normal.

    I've downloaded and installed Lightroom 6. The icon is on my desktop, but it won't open. The older version is still there also, and it works like normal. How do I fix this.

    Hi Alian,
    Please try to follow the steps given in the article.
    http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    Regards,
    Sumit Singh

  • I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but can't it won't drag to the timeline. I'm using FCE

    I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but it won't drag to the timeline. I'm using FCE

    You cannot drag the effects themselves to the timeline.  You add them to a clip in the Viewer, just as you have done. 
    If the clip was already in the timeline when you  opened it in the Viewer (by double-clicking it in the timeline to open it in the Viewer) and then added the reverb effect, there is nothing further to do, you have added the effect to the clip.  You don't drag it back to the timeline.
    You only have to drag the clip to the timeline if the clip was not already in the timeline (for example, if you opened the clip from the FCE Browser; or set different In and Out points in a master clip to use a different portion of the master clip in a different location in your timeline).
    Depending on the effect you add, you may have to render the timeline after adding the effect.  But I don't think reverb requires immediate rendering.  One other note, you said you were working with an audio clip ... audio clips need to be AIFF (not MP3 or something else) and preferably 16-bit stereo.

  • I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

    I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

    Adobe admits to a Flash problem here:
    http://forums.adobe.com/message/6285851#6285851
    YOu can apply the fix they show and tehn wait for them to fix the problem

  • I cannot seem to get the app to download and install.  I get the spinning progress wheel.

    I cannot seem to get the app to download and install.  I get the spinning progress wheel.

    Hi profoto3,
    Are you trying to download and install the Creative Cloud apps? Which operating system are you using?
    Here is a helpful network troubleshooting doc. Go thru the steps in this doc to ensure that you can download.
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Free Creative Cloud | Download Adobe Creative Cloud free trial
    Thanks
    Scott

  • Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!

    Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!
    Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist.   Verify that you have access to that directory.

    Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist.   Verify that you have access to that directory.
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    Vista instructions in the following document: Check your hard disk for errors
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Erasing and installing plug ins from the internet

    erasing and installing plug ins from the internet?

    What plug-in what browser??
    FireFox>Tools>Add-ons>Plug-ins, etc
    Safari>Preferences>Extentions
    Safari>Help>Installed Plug-ins

  • Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces?

    Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces? The Nio reads hte guitar but GB doesn't....

    Usually effects packages are AU plugins that would have no effect on track selection. Interfaces should have no control over what kind of track you can select. I really think something else is going on her maybe something you overlooked.
    Did you choose the input channel in the track info pane. Try both channel 1 mono or channel 2 mono. Make sure the track is record enabled.

Maybe you are looking for