Remove black bars from social videos on Muse

Hi,
How can I embed videos from youtube/vimeo without having black bars appear above and below them? See screenshot...

This happens due to aspect ratio of video , you can try these options :
http://stackoverflow.com/questions/19794000/removing-black-borders-on-a-vimeo-iframe-embed -using-css
http://www.reelseo.com/remove-black-bars-youtube/
http://wistia.com/blog/remove-black-bars-from-online-video
http://stackoverflow.com/questions/26617154/responsive-fullscreen-youtube-video-with-no-bl ack-bars
Thanks,
Sanjit

Similar Messages

Remove Black Bars from Top and Bottom

Here's my situation:
I shot my footage FULL FRAME (not anamorphic) but while shooting my footage I had markers on my LCD for a 2.35 Aspect Ratio.
Now that my footage is edited I dropped the FCP matte filter for 2.35
For those of you out there I know I did not use a anamorphic lens and I know I did not shoot it on 16:9 format. But is there a way to crop out the Black bars?
Again like the previous post I would like to remove the black bars and have my QUICKTIME MOV. play like the ones on APPLE's Trailer site: http://www.apple.com/trailers/
Can anyone out there explain how to do this? Other then just drop this and change the size...WHAT DOES THAT MEAN? If you can provide more step by step information that would be great!

1. Create a New Sequence in FCP (Command-N)
2. Bring up your Sequence Settings (Comman-Zero) and alter them...
2a. so that your Frame Size is (approx) 720x306
2b. set Aspect Ratio to Custom.
3. Drop in your widescreen-filtered footage (they'll be shrunk, so...)
4. Select your clip (or all clips) (Command-A)
5. Remove Attributes (Option-Command-V) and select 'Basic Motion' then click OK.
6. Your movie should now (pretty much) fill the 2.35:1 sequence.
You'll probably need to tweak the frame size slightly (It's been a while since I've done this so my number(s) might be off).
Also, when you (ultimately) Export Via QuickTime Conversion (for the web?), be sure to take into account that the web uses Square Pixels - so resize your QT movie (in the Save Dialog, under Options) to be 640x306. (Again, my exact numbers might be off)
Good luck.

Removing black bars from youtube/altering aspect ratios for youtube

How do you get rid of the black lines on the vid on youtube using I Movie 08? I have tried using the crop options in I movie, and still cant get rid of the back lines above and below. The cameras aspect ratio is 4:3 and using crop options of “fit” or “done” does not fix it. For example, here’s an exercise vid I did.
http://www.youtube.com/watch?v=EWgFDVI8Xs4
What is the cure for this? I notice when the vid is in the even library it’s in 4:3 as the source vid from the cam but is converted to 16:9 when moved to the project library. Is there any way to prevent that or convert it back to 4:3? I had thought the crop options in I movie would do the trick, but it does not from what I can tell.

Welcome to the  Discussion Forums
Is your project 4:3, you set this when you create your project. You can check this by looking at the project properties from the file menu.

Remove menu bar from second monitor maverick

Hi, Can i Remove menu bar from second monitor maverick ?
Thanks

Apple has sort of screwed up the whole full-screen / multi-screen features of OSX. I get it's hard to achive it all in a "perfect way" for everyone but the so called "improved" multi-screen features of 10.9 add a number of issue on top of the "fixes".
1. Switching between apps with CMD + TAB is bugged with using 10.9 screen-setup. The OS doesn't understand what screen I'm using and the CMD + TAB feature shows up on screen 1 or screen 2. The only way I've found to controll this is by activating the DOCK on either screen which is a very bad solution.
2. Spotlight searching always follows the "active" screen. At least 10.9 understands what screen is my active one but in this case I never ever want screen 2 to have Spotlight on it. Very irriting.
3. Remembering application positions. If I open an app from the dock on screen 1, place it on screen 2 close it and again open it from the dock on screen 1 the app will open on screen 1 and not screen 2. Some apps will remember certain windows on the correct display. A solution is to open the app from the dock on the display you want it on. Very irritiating.
4. Swiching between apps is also bugged. Concider I have mail on screen 2 and a new mail window on screen 1. I CMD + TAB to Safari on screen 2 after starting to write the new mail on screen 1. No problems here. If I now howvever CMD + TAB back to mail, the last active window (new mail window on screen 1) won't be active. Very irritating.
As noted above, going back to what we had in 10.7 and 10.8 solves these issues but doesn't solve Apples horrible fullscreen app issues. I'd go as far as saying Apple hasn't really fixed anything in 10.9 - only cause more issues and confusing behavoir. Fullscreen apps are often very lacking in funktion, having safari or mail fullscreen renders them on a large screen very very limited compared to "maximized". It's also very confusion that you are required to travel between virtual desktops to use full-screen apps. I personally would prefer the option of "layered fullscreen apps". For example VLC allows me to work this way.

How to remove red eye from you video with adobe premiere elements?

I would be greatful if someone could let me know how to remove red eye from a video, which I will be using for my acting reel. Thank you!

Ang.Fel
What version of Premiere Elements do you have and on what computer operating system is it running?
Do you have an integrated set of Photoshop Elements and Premiere Elements (such as 10/10, 11/11)?
How long is this person with the red eye viewed?
There are two possibilities that I can think of, but I would have to work it through with the actual footage and adapt accordingly.
1. Keying and color correction.
2. In Premiere Elements, do a freeze frame (in Freeze Frame dialog, Edit in Photoshop Elements after Insertion + Insert in Movie Option + adjustment of duration of the Freeze Frame bmp).
In Photoshop Elements, Red Eye Tool if possible or other color correction tool there.
How did you ever get red eye in video?
ATR

Can't remove black bars when converting

I have seen numerous threads talking about Adobe Media Encoder producing black bars when converting videos. Some are saying it's a bug w/ CS4, others are saying its something to do w/ non-square pixels. I really don't know, and I really don't understand most of it, sorry.
My dilema is, I have some .mov files created in Final Cut Pro with a 4:3 aspect in NTSC. I need to convert them to .flv so I can stream them on a website. My current settings are:
FLV - Web Large, PAL Source (I'm using PAL because it seemed to create a better quality video when I was streaming)
Export Video
Export Audio
On2 Codec
Resize Video (786x576)
Frame Rate - 15
Bitrate encoding - CBR
Encoding Pass - One
Bitrate - 1,500kbps
Undershoot (%Target) - 90
Quality - Best
When I export the files and try to play them in a web flash player (480x400) I get black bars on the top and bottom. I don't really have a lot of experience doing video editing so I'm shooting in the dark here. I have adjusted a lot of the pre-mentioned settings but still no luck. Help me out please!

Ok, it will take a minute to figure out how to do that....haha. (This is my first time using the software, can you tell?)
Meanwhile, take a look at these screenshots. The output preview appears to show it will still produce the black bars. Although I'm not sure if I want to trust it because there are times it appears to show it WONT produce black bars and yet it still does...

How do you remove EXIF data from a video shot on an iPhone5s?

I'm trying to remove location metadata from a video of my daughter before posting to YouTube and can't figure it out. I tried opening the video in Adobe Premiere and Bridge and both don't display the location data for some reason, they fields are just blank. But I can see the locaction data if opened in Quicktime or iPhoto, but neither program allows you to edit the EXIF data for some reason. And any app I find seems to only work on photos and not videos. Any thoughts? I'd love to upload this video without revealing our exact location. Thanks.

Check out A Better Finder Attributes 5: Mac OS X Batch Date Changer for EXIF Photos, Files and Folders. It may do what you want.
OT

Does anyone know which software can remove a logo from a video as well as subtitle in it. Thanks

Does anyone know which software can remove a logo from a video as well as subtitle in it. Thanks

Watermarking like this cannot be easily removed (which is the entire point of including a watermark). You would probably have to go through the video frame by frame, editing out the watermark and subtitles by hand, and then it would take a lot of work to try and reconstruct the background to not just leave a blank spot. It's not worth the effort unless you wanted to use such a video professionally, and then you would need a licence after obtaining of which you probably could obtain the original footage without the watermark.
If you really want to explore this, though, see:
http://www.fxguide.com/featured/the_art_of_wire_removal/
Regards.

Black bars on youtube videos coming from adobe premiere elements 10?

Every single video that I have edited on this programme, once saved, has come up on youtube with the black bars either side of it. I've tried to fix it but havent been able to. I believe its something to do with the setting that I saved it as but I'm not sure which setting to pick to get the right ratio for the youtube screen. Any gelp Would be most appreciated.

Coolbeans
We will need more information to look for the cause of the issue that you are describing.
1. On what computer operating system is your Premiere Elements 10 running? And, what is the video card that the computer uses?
2. What are the properties of the video that you are using when this issue occurs? I am looking for video and audio compression, frame size, frame rate, interlaced or progressive, file extension, pixel aspect ratio.
3. What are you setting as the project preset for this project? The project preset should match the properties of your source video.
4. How are you uploading your Timeline content to YouTube....
a. Are you exporting your Timeline content to a file saved to the computer hard drive and then uploading that file to YouTube at the YouTube web site? If so, please give all the export settings including any customization of the export settings under the Advanced Button of the preset selected.
or
b. Are you using the program feature Share/Computer/Online/YouTube? If so, what preset are you selecting for this upload?
Please review, supply the requested information, and then we will move forward from there.
Thank you.
ATR

Removing the black border from exported videos

Ok, basically I'm trying to rip DVD footage and convert it to something playable on an iPod. Nothing too hard getting it ripped and converted and all, but the VOB files didn't break right on the episodes, and I also wanted to edit out the theme from the beginning of EACH episode in the interest of space.
Overall it's working pretty well so far, I've been able to perform all that I needed to do, but when I export I get a wide black border around the video which looks fine now, but will take up a lot of valuable space when reduced to iPod resolution. I've found ways to change the color of the border in FinalCut, but no real way to remove it. Anyone have a way of dealing with this?

Ok, figured out what to do.
If you go to the canvas, hit the box for the borders, tell it to show the wire frame. Click and you can rotate, resize, etc.

Removing Black Bars on iMovie Projects (Aspect Ratio / Resolution Problem)

Hey folks,
I jusr recently recorded a video using fraps on my PC while playing World of Warcraft. I've transfered this over to my mac to import into iMovie and upon importing the file (using a DV Widescreen profile) there are two black bars on either side of the video.
I believe this is because my monitor is using a different aspect ratio (max resolution is 1680x1050, in otherwords not 16:9 as the profile indicates).
How can I configure iMovie to conform to the aspect ratio of the origional imported video? I know if I import the video and get it edited to the final version I want to encode, there is an option using the Divx codec to remove these bars - But i'd like to keep the video using the H.264/.Mov standards (Divx looks like crap IMO!)
Any suggestions?
Thanks!
- Evan

Hey folks,
I jusr recently recorded a video using fraps on my PC while playing World of Warcraft. I've transfered this over to my mac to import into iMovie and upon importing the file (using a DV Widescreen profile) there are two black bars on either side of the video.
I believe this is because my monitor is using a different aspect ratio (max resolution is 1680x1050, in otherwords not 16:9 as the profile indicates).
How can I configure iMovie to conform to the aspect ratio of the origional imported video? I know if I import the video and get it edited to the final version I want to encode, there is an option using the Divx codec to remove these bars - But i'd like to keep the video using the H.264/.Mov standards (Divx looks like crap IMO!)
Any suggestions?
Thanks!
- Evan

How do I get CS4 Change Quality Presets to be used and remove black bars?

In Encore CS4 I CAN change the quality preset to what I want, but then when I go back to the project it does not stick. I tried to get to transcode settings, but they are greyed out. There does not seem to be a way to "USE" the quality preset I have saved!
This is a single video clip that I sent to Encore from Premier Pro CS4 so I could make DVD and BD's. However it seems I am unable to make a DVD at 4 Mbps (so I can combine this Premier Pro Project with another on a single DVD) no matter what I try. Also I notice the BD I made was not m2v like I am used to in CS3, and therefore are not sure I can combine it with a menu and another clip on a single BD as I have done numerous times in CS3 Encore.
I also notice as I look at preview, and then also when a made a default setting DVD that there are black bars on either side of the picture. This was a 1440X1080 60i project in Premier Pro CS3 and I am desireing to make ait a 1920 X 1080 DVD.
Neither of these were problems in Premier Pro CS3 and I am thinking the way around this is to spend the day or two and redo the project in CS3. I have done many projects successfully in CS3 and mistakenly thought I could just pick up the project in CS4 and be successful again. If anyone knows how to resolve these in CS4, it would save this extra work, if not, I will join the crowd with CS4 "issues" and go back to CS3.

First, on the black bars. I do not want them at all. I cannnot post a screenshot now as
file attachments are turned off temporarily, but they are about 5% on either side. Totally unacceptable especially when in CS3 when exported to Encore there are NO black bars either visible in Encore or in the resulting DVD's
On the options and is the preset saved. I can close Encore and open it afresh and find the preset that I saved listed in the dropdown of presets with the name I saved it as and all the settings the way I want them.
On the issue of Transcode settings when selecting the resource... When I select the resource in the Project panel, or in the Timeline tab, the Transcode settings is greyed out. I have consulted the help screens and forums for various ways to change the transcode settings and none of the suggested ways work.
It looks like my CS4 install does not work the way yours does. I am about to completely unistall CS4 and CS3 and all other Adobe products and try a fresh reinstall to see if that works. Most likely I will simply reinstall CS#, since that works, and abandon CS4 for now as I am getting way behind on my work, and know I can finish with CS3. I have also heard form others that Sony Vegas is really solid and does not have all these weird bugs such as seen in CS4 and CS5, and is a much less bloated product and does the encodings faster. Since it is also less expensive, this seems too good to be true, but work a trial. So first rip every Adobe product off my PC and format the HD and start fress with JUST CS3 and get my work done. Then try Vegas to see if it is as good as my buddies say, if so bye bye Adobe!

I get every time after rendering four black bars around the video, I would like to fix this because it is not really professional.

sorry for my poor english, I have a problem with adobe premiere elements 12 when I render I get a video black bars on all sides of the screen, which makes the video smaller. How do I fix this?

Bram Bakker
Are you OK with translating the language English to Dutch? Have you been using the Translate button at the bottom right of the posts to translate what is written in English to Nederlands (Dutch)? Is the major problem that you cannot find the locations that I point to in Premiere Elements?
1. What are the properties of the video that you are putting on the Timeline? The quick way to find this
information is knowing brand/model/settings of the camera that recorded the video on the Timeline.
From this question I am trying to find out what the properties are for your video - video compression, audio compression, frame size, interlaced or progressive, file extension, pixel aspect ratio. I was hoping that you could tell me the brand/model/settings of the camera recording the video so that I could find the information myself.
2. What are you setting (manually) or the project (automatically) as the project preset that will match
the properties of the video that you are importing? If you do not know, then tell us what you see under
Edit Menu/Project Settings/General and the readouts for Editing Mode, Timebase, Frame Size, and Pixel
Aspect Ratio, even if the fields look grayed out.
Besides knowing the properties of your video, it is just as important to know the project settings. Are you setting them yourself or just dragging the video to the Timeline and letting the project set the project preset automatically? If you are doing nothing, then the answer is that the project is doing the setting automatically.
Either way, you can find out what is being set by going to Edit Menu/Project Settings/General and looking for the reading that you see in the following screenshot.
3. The next big question is "What do you mean by rendering?"
Do you see these black borders after you render the Timeline content in the Edit area to get the best
possible preview of what you are seeing in the Edit area monitor?
or
Do you see these black borders after you go to Publish+Share/ and export the Timeline video?
If your "rendering" refers to the export of the Timeline, please tell us Publish+Share/and then what?
This question 3 should not need a screenshot. The question is where are you seeing the black border in your video.
a. When you are in the Edit Area of the program and you press the Enter key of the computer main keyboard or the Render
button above the Timeline.
or
b. After you have exported your Timeline using Publish+Share/ and one of the export paths.
Please see if any of the above helps. If it does not, then let us try this. In Dutch if you want, describe in your own words
what you are doing in much more detail and post screenshots of the areas involved on your Premiere Elements 12.
Then I will deal with interpreting what you wrote.
We want you to succeed. So whatever way works, that is the way to go.
The answers are in the details.
Thank you.
ATR

Remove address bar from file explorer (using regsitry)

This used to be possible in 2008, but I haven't been able to figure out how it's done in 2012 R2. The old method was to add a key under IE, and it would also remove the address bar from windows explorer - but this method
no longer works. So is anybody aware of what key needs to be changed or modified in order to make this happen. Further, ideally this change would happen in HKCU.
Thanks

Hi,
>>That would seem to remove run from start menu, not the address bar from file explorer.
Yes, this setting will disable Run.exe. However, this setting will also prevent users from accessing local or network resources by typing the accessing paths in the address bar of File Explorer.
I am not completely sure why you want to remove the address bar in File Explorer. However, if our target is to restrict users from accessing network resources by UNC path, in my opinion, enabling this setting a better way to go.
In addition, regarding this topic, the following thread can also be referred to for more information.
Hide Windows Explorer Address Bar
http://social.technet.microsoft.com/Forums/en-US/987305c6-bd48-4107-bcf5-84d4fff4097d/hide-windows-explorer-address-bar?forum=winserverGP
Best regards,
Frank Shen

Remove control bar from MOV clip

I dropped a MOV file into the web page and it created a
control bar at the bottom. This is nice for most uses, but I don't
want it. Any idea how to remove the bar? I tried re-sizing the
graphic, but that just resizes it from the middle, so the result is
that I would have to cut off a portion from the top equal to the
size of the control bar at the bottom :-(

set controller parameter to "false"
http://www.mediacollege.com/video/format/quicktime/streaming/
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"enthios" <[email protected]> wrote in message
news:g7q1e6$21d$[email protected]..
> I dropped a MOV file into the web page and it created a
control bar at the
> bottom. This is nice for most uses, but I don't want it.
Any idea how to
> remove the bar? I tried re-sizing the graphic, but that
just resizes it
from
> the middle, so the result is that I would have to cut
off a portion from
the
> top equal to the size of the control bar at the bottom
>
>

Remove black bars from social videos on Muse

Similar Messages

Maybe you are looking for