Remove bluetooth device - device not available

I have a iPhone 5 and recently traded in a car that was paired via bluetooth. I did not think to undo the pairing prior to saying goodbye.
I know it is not a big issue and won't mess with the new vehicle, but I just like things neat and tidy and would like to remove it from the list.
The real stinky thing about it is that both vehicles are the same model and I now have two items in the list with the same name and only one is valid.
Any way to delete it?

I was attempting to remove the device from the list on the phone. For some reason I could not do that when selecting the device. It would not go to the that next screen. This is while I was connected to the new vehicle.
Once I was away from the vehicle, where it could not connect, I was able to access that additional screen and forget the device. I did this before I saw your response. But you are absolutely correct. I would just add a caveat to not have any connection with any bluetooth device while attempting to forget another device unless of course it is the device that you are currently connected to.
Chris - Thank you for your response

Similar Messages

Wave Device: Not Availa

Hi,?Hope this is an easy one but i'm going round in circles. I have installed my X-Fi Platinum card into my machine, installed drivers. But no sound. When I inspect the Audio Console?It says?Wave Device:Not Available?MIDI DeviceSB X-Fi Synth A [EC00]?Mixer DeviceSB X-Fi Mixer [EC00]?In device manager it's fine no conflict?I have bios disabled the on board soundcard, I think it is something simple but I just can't find the solution. Thanks

I just tried this and it has not worked. I am getting an error message though:The ordinal 6663 could not be located in the dynamic link library MFC42.DLL
?I have previously tried the following?
upgraded drivers to latest revision<
reinstalling drivers twice<
deleting device from Device Manager and rediscovering then installing new drivers<
swapping PCI slot testing, then after fail reinstalling drivers<
disabled other sound devices in Device Manager<
Creative Diagnostics crashes, I would like to flush every trace of the creative suite (all versions and?every registry entry) from my system and start with a fresh install, I realy think this may turn out to be a nasty one.
?Message Edited by markedwards_uk on 2-0-200703:45 PM

My iPhone 4 will not find any Bluetooth device not even my ipod touch . When I turn on bluetooth it starts searching and then never stops. It never finds my headset and never stops "searching". I have tried restarting the phone

My iPhone 4 will not find any Bluetooth device not even my ipod touch . When I turn on bluetooth it starts searching and then never stops. It never finds my headset and never stops "searching". I have tried restarting the phone. what to do?

Hi,
You probably need to do this...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
But Try Here First
Frozen or unresponsive iPhone
From Here:
http://www.apple.com/support/iphone/basics/

Can't update itunes. I get " The feature you are trying to use is on a CD-ROM or other removable disk that is not available

Can't update itunes. I get " The feature you are trying to use is on a CD-ROM or other removable disk that is not available"

I am getting this same message when it tries to install it is Itunes.msi
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

"the feature you are trying to use is on a RD-ROM or ohter removable disk that is not available insert the 'itunes' disk and click OK

I've beeing having problems with Itunes since about january, wheneveer i click on itunes the error message reads "The file 'ituneslibrary.itl' cannot be opened because it was created by a newer version on of itunes", yet when i try to updat to itunes 11 or uninstall itunes from my computer i keep on getting a message stating "the feature you are trying to use is on a RD-ROM or ohter removable disk that is not available insert the 'itunes' disk and click OK" what is the best way to fix this problem?

yet when i try to updat to itunes 11 or uninstall itunes from my computer i keep on getting a message stating "the feature you are trying to use is on a RD-ROM or ohter removable disk that is not available insert the 'itunes' disk and click OK"
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Bluetooth is suddenly not available anymore!

bluetooth is suddenly not available anymore! and i can`t find it in the systemeinstellungen

For a starting place trythese:
SMC reset:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
PRAM reset:
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.

When trying to connect by Bluetooth to cellphone both devices recognize each other then I get the error that device not available.

Would the problem be with cell carrier

Bluetooth has nothing to do with the cell carrier, unless they have restricted its use in a network specific phone (some US based networks do this).
Exactly which cell phone (make and model) are you trying to connect to which other Bluetooth device (make and model), and for what purpose?

Removed bluetooth device by accident

Hello fellow Mac Lovers!
I was trying to pair my JBL Speaker/Microphone and when I had the Bluetooth Preferences open I right clicked on the wrong JBL device and selected "Remove" and it removed it. Now, I want to add it back but I cannot find how to do that. Can you help me add it back? I've tried removing the plist files but that didn't help.
Any help is greatly appreciated.
Thank you,
Brian

Hi dominic23 and Mac smarties, This was NOT helpful at all. Please try what I am asking about before you reply.
If a user (you) opens System Preferences and selects BlueTooth you will be shown a list of the available devices that you could attempt to pair to.
If you RIGHT CLICK on a device the menu items has "Remove" as an option. If you select "Remove" the device disappears and you will never see that device in the detected Devices window again.
THIS IS MY PROBLEM.
How do I get it to show in my screen again???
What I imagine is that there is a list being maintained that holds all the devices that you never want to see again. This list is what I am looking for. If I had the source I would simply traverse the code and go clean the file.
What I imagine is that this file that tracks the devices I never want to see again in a profile Var or a file located in my User preferences area. I have not been able to find this yet but, I am certain that it is in some .ignore or blacklist.cfg that the device code checks before showing the entire list.
Once more please, I would appreciate any of the few Mac iOS geniuses to read this and say "Oh simple man, it is here *****. Credit please :-)"
Thank you,
Brian

Cannot remove bluetooth devices in iOS 8

In bluetooth settings, I am trying to remove a bluetooth device using iOS 8 on an iPhone 5; however, when I select the device, "Forget This Device" is greyed out and unavailable. I have done some searching and found that this can happen with jailbroken phones, but mine is not jailbroken. I now have two devices that are in my iPhone bluetooth settings that have this issue: my iMac and my iPad.
Anyone else seeing this or knows of a fix?

I just found a solution that worked for me by disabling Handoff in both my iMac and my iPhone.
For OSX:
System Preferences → General and scroll down. Uncheck Allow Handoff between this Mac and iCloud devices
In iOS:
Go to Settings → General, scroll down and turn off the switch for Enable Handoff
I was then able to select forget for the desired bluetooth devices, and then switch Handoff back on.

Can't remove bluetooth device in file explorer.

I had an LG LS970 Phone paired with my windows 8.1 HP touchsmart PC. After I uninstalled the phone under bluetooth devices, it keeps showing up on my File Explorer. When I double click on it, an FTP No Response dialog box pops up. When i right click
on it, it does not give me an option to delete it. How do i get rid of it? I am also trying to pair my iPad with my PC but its not working. I think this might be a problem. Please help.

Hi,
According to your description, it must the driver which relate with LG-LS970 no uninstall completely.
First of all, please check Programs in Control Panel, make sure the Bluetooth related driver removed completely.
Seondly, Access to Device Manager, check is it had Bluetooth device driver, if so, uninstall or disable it.
Thirdly, Open Registry, CTRL+F, search LG-LS970, if it found any value, delete it.
Roger Lu
TechNet Community Support

Bluetooth devices not finding or connecting to iPhone 5 after update to iOS 6.1.3?

Is anyone else having this problem? This is also happening on my ipad 4th gen. Anyone have a solution for this? It is very frustrating!

I figured it out. On the device(s) that I was trying to connect there is a function on the device that makes it discoverable by your iPhone/iPad. Some devices have an actual button that is labeled "connect" on the bottom or in an inconspicuous place on the device. Others can activate this function by long holding the action button (like that on a Bluetooth headset) for 5+ seconds until the device goes into "discover" mode. Then your iPhone/iPad should be able to find the device and you can connect. If this does not work sometimes hard resetting the actual Bluetooth device will fix the problem. You will have to research your specific device as each one has a different sequence to accomplish this. I hope this helps!

ThinkPad W540 - Win7 - Bluetooth device not recognized by Windows 7 - REALTEK not supported OS !!

In my Device Manger there are three devices that are working properly the are:
Bluetooth Peripheral Device - Not Installed
Bluetooth L2CAP Interface - Disabled
Bluetooth Peripheral Device - Not Installed
These devices are found by the Lenovo Solution Center.
If I go to Lenovo's driver download page and download and attempt to install the REALTEK Bluetooth drivers when setup starts it ends with a prompt stating
"Sorry ! We do not support this operation system !!"
I am running Windows 7 64bit which is the driver that is suppored per the lenovo driver site.
Thanks for your help

My guess is that you are trying to install the driver for a newer machine (different Bluetooth device). I believe you need this one:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7zwb06ww.exe

T410 bluetooth device NOT FOUND

Hello Everyone,
I have a t410, product id is 2539AJ6 (bluetooth included), running Windows 8.
however i can't get bluetooth to work, in addition it seems like there is no trace for a bluetooth device on this computer:
- Can't install driver ("Device not found").
- Not Recognized by Windows 8.
- on BIOS, Security -> I/O Port blah blah -> no mention of bluetooth settings there.
where do i go from here? anybody ever encountered such an issue with bluetooth?
btw, im pretty sure there is a bluetooth device on this laptop.
appreciate any help

Here's the Link for the 2539-AJ6, it does indicate that you have Bluetooth. Dowload and install the latest drivers.
http://support.lenovo.com/en_US/downloads/default.page?

SPP Bluetooth devices not listed in Mac mini

Hi,
We're developiong Bluetooth supported hardware. the hardware supports bith SPP & iAP.
Works fine on any iOS device (iAP protocol)
Works fine (SPP) on an old Mac mini machine.
Works fine (SPP) on any android device.
But, on a new Mac mini machine the device won't even get listed in the Bluetooth devices list.
Old Mac mini (Device is working perfect):
OS X 10.6.8
1.83 GHz
Intel Core 2 Due
New mac mini (Device is not detected):
OS X 10.8.4
2.3 GHz
Intel Core i5
Any assiatance will be great,
Thanks,
Dan

interface GigabitEthernet5/0/24
switchport access vlan 110
switchport mode access
switchport voice vlan 250
srr-queue bandwidth share 1 30 35 5
priority-queue out
mls qos trust device cisco-phone
mls qos trust cos
auto qos voip cisco-phone
spanning-tree portfast
service-policy input AUTOQOS-SRND4-CISCOPHONE-POLICY
end
I condensed one of the ports as follows, but it's still in the game flapping:
interface GigabitEthernet5/0/24
switchport access vlan 110
switchport mode access
spanning-tree portfast

W530 - Bluetooth device not connected - Windows 8

I recently upgraded to Windows 8. Bluetooth was working fine. Today I tried to use Bluetooth only to find that it doesn't work anymore.
In the Windows 8 Device Manager (Win + X | M) the Bluetooth doesn't show up anymore unless I show hidden devices (View | Show hidden devices).
The message on the properties of every Bluetooth device is:
"Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer."
This seems to only apply to Bluetooth. WIFI is working fine.
Does anyone have any ideas what's wrong?

I have been trying to "Connect" to my laptop (running Windows 8) with an external bluetooth device (HC-05). I have tried allowing the HC-05 to me the master and initiate the connect and vice versa. I can "pair" the two devices but I am unable to "connect" Sometimes I will look in the device Manager and see that "COM5" and "COM6" ports appear under the "ports" listing. COM5 is shown to be the incoming and COM 6 is shown to be outgoing for the bluetooth adatper. When I open a serial term, the connection fails. Then when i check the COM port proerties, I see the ERROR 45. I checked the drivers and it says there are non installed. I open the Bluetooth USB Module (under Bluetooth in Device Manager) and checked it's driver. The message says they are up to date.
Thoughts?
What is the best way to update my BIOS? Do you think I am mising drivers for these (what apear to be "virtual") ports?

Remove bluetooth device - device not available

Similar Messages

Maybe you are looking for