Remove Call Quality Popup

Hello Community: I know this has been hashed before but didn't see anything recently. Do you know if there's anything that can be done about the infamous Call Quality popup. Does the business edition also have this annoying thing? Please, tell me there's some switch to turn it off. Surely at this point Skype has a better way of gather call quality metrics than bugging the users on nearly every call.
Thanks for any help,
David

Hi, DBDave, and welcome to the Community,
DBDave wrote:
Surely at this point Skype has a better way of gather call quality metrics than bugging the users on nearly every call.
I actually encourage taking a few seconds to click responses. These statistics - and our ratings - are important to Skype as they assess call routing.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

IPhone 5 call quality

I just bought my iPhone 5. I was disappointed when I received a call and discovered the phone call quality on my end is bad. The other person's voice sounded very tiny and soft although I have already turned up the volume to maximum. Is it that way with all iPhone 5? The receiver could hear me clearly. I tried speaker and the person voice sounded much much clearer.
Please recommend suggestion to fix this or I have a defected phone?
Thank you!

Actually, after examining my phone properly, i think that this problem might have been caused by the plastic cover that I have yet to remove as it looks like it is blocking the earpiece. ><
My apologies.

My iphone 5 is having poor call quality? Verizon can't figure out why. Anyone else having problems?

My phone has been working without any problems since I bought it in January. Yesterday I had a Zagg invisible shield applied to my phone and as soon as I got home, the call quality was horrible. I could hear people on the other end however, they couldn't hear me, the call would be dropped, or they said I sounded like I was in a tunnel. I removed the zagg cover and it is still not working like it was before. I called Verizon and did everything from resetting the network settings, to restoring the phone to factory settings and restoring it from the last back up. Nothing is working. I have never had these problems up until yesterday. Verizon would try calling my cell and it would ring on their side but not on mine. Very strange. Phone is up to date on its software.
Anyone else having these issues or know a way it can be fixed???
Thank you!!!!

Hello the third!
I placed the <ul> css code you supplied in the main.css file as well. No avail.
But I did just notice there is a tiny thin yellow line between the logo and nameplate graphics at the top and the menu bar. That yellow line disappears in IE8 compatability mode. The graphics sit right on top of the menu bar, as it appears in Dreamweaver, and the margins and such all line up. In regular IE7, the thin yellow line is always there.
I don't know if this helps, but it is something I just noticed while tinkering around.

EXEcutable only starting DLL when calling a popup before.

Hello,
1. I have created a DLL in Labview 8.2 with one VI/function.
2. Then i call this DLL/function in a new VI
3. Then i created an EXE-file of this VI (which calls a DLL)
Attached a screenshot of the code.
As you can see it contains a sequence-structure where in the first part i open a message-popup and in the second-part i call the DLL.
When i run it like this then it works without problems.
The funny thing is:
When i remove the message-popup and create a new EXE-file and run it then nothing happens!
Only the Run-arrow changes to running-mode (and stays there until i close it with taskmanager) but the outputs dont-change (they stay "0").
(The VI in the DLL that i call is very simple. The Inputvalue "11" is added and multiplied. This two results are returned. So nothing special.)
Whats wrong here? Seems like Labview can´t make the DLL-call starting in the second exe-file (without an popup before).
Is this a kind of a bug?
Thanks for your help and ideas
Attachments:
screen.jpg ‏26 KB

Hmm, i´m getting a red error-message after cklicking on "install LabVIEW 8.2.1 now." in your link.
Whats going wrong here?
--> See attached screenshot
Attachments:
error.jpg ‏54 KB

Disable Call Quality Feedback

Morning all, Does anyone know how to disable the call quality feedback that keeps popping up after making a call. I use skype for business purposes and have the call quality feedback box popping up all the time. Very frustrating. Can anyone assist please??? Thank you in advamce!

Dear Skype support,
I have a huge problem with your Skype call quality feedback. I use Skype to talk with my friends and play together full screen games online like CallofDuty7 BlackOps. We have a big community and we have our own discussion which we never leave, we use it to talk while we play the game together (instead of the game team speak). We do this all the time but with your new add "call quality feedback" popup window it throws me and my team mates out in Windows to ask us about the quality of the conversation. This happens everytime someone from the group decides to end call, while the caller and everyone else are still talking on the discussion. This interrupt out game and sometimes the game even crash and Skype ruin the experience with this unwanted and offensive popup. Please fix this problem at your next version of Skype or me and everybody else I know that is a Skype lover but have a problem with your harrasing way to ask people about every conversation - we will leave Skype and go on something else. I have friends, family and co-workers that use this to contact me and they all would change Skype with something else just because I cant stop this harrasment !
Best regards,
Yours truly user.

My LG G3 has terrible call quality.

My LG G3 has terrible call quality. It's fine for first few minutes, but after about 5-10 minutes of call, the person I'm speaking to can't hear me because my sound becomes jittery and /or fades out. I can hear them fine but they can't hear me.

You might Try pulling out the Battery and then removing the sim card for about 10 min. then re-install the Card and re-power the phone see if your call Quality improves..
Note: remove and re-in-stall the card with caution Sim Cards are extremely sensitive in the Gold contact Area..

Kyocera Brigadier, awful outbound call quality

Working on the farm and in the woods I thought it would be good to have an indestructible phone in case of an emergency. Have that supposedly indestructible phone, the Kyocera Brigadier, except no one will be able to hear me if I call 911 for help.
The outbound call quality on this phone is miserable and frequently totally undecipherable by the other party. In fact I had a Verizon support person ask which phone I was using because the audio was so bad on his end. He promised to look into the matter, to my knowledge that has not happened.
I have been to the Verizon store to complain and the fix then was a factory reset; things were better ...for a few days.
Emailed Kyocera the other day, they sent instructions saying to do another factory reset. Great, except the instructions are wrong as tell you to remove the battery as part of the process. Can't remove the battery on this phone. Pointed that out to Kyocera, no follow up.
Net-net, if I do get into an emergency I will have to send a text.

Hello SwitchgrassFarmer,
Long story short, I had to upgrade my Brigadier's firmware because of a display problem I was having and the update fixed the display but as a bonus my call quality improved. I could always hear everyone, that was never a problem...in fact I have yet to encounter a situation where I couldn't hear someone but the opposite was not true. In the car for example, if I had the windows rolled up it was OK but if I rolled down a window(s) then people on the other end would have trouble understanding me. I tested this and it sounded to me like the phone was picking up literally every sound and broadcasting it to the other person.
The update fixed the display but as an added bonus it helped the call quality. I don't know what or how it did it but I am happy it did. I almost never get complaints any longer. It's worth a shot to make sure you have the new firmware version.
Go to Settings > About Phone and look for Software version. Make sure it is the 1.723VZ and not 1.102VZ. As of now, 2/26/2015 the 1.723VZ is the newest to my knowledge.
I hope this helps.

Charge cases effect call quality

I recently posted an issue with my Charge regarding call quality (it was "solved", so I'm opening up a new post since I am now having the same issue again).
I purchased the diamond design silicone case at Verizon when I purchased my charge (plastic-type case). I was having poor quality with the charge; a loud, scratching static noise was produced on 50% of my calls. I removed this case, and I've had no call quality issues.
I recently purchased a new case at a Verizon store; the soft "rubbery" silicone case. At first, I did not experience call quality problems (I've had the case for about 5 days). Now, I'm experience the same "static" scratching noises on 50% of my calls. I have to hang up and call back to get a clear call, and this is becoming very frustrating. I've spoken with IT over the phone, and they have no knowledge of this issue. I am now removing this new "soft" silicone case to see if my calls will be effected.
This is a serious issue that needs to be addressed; of all things, call quality is paramount with a "phone". I need to have some sort of protection encasing my $300 smartphone, however, it appears cases for the Charge effect the call quality. I've read that other people are now having this issue.

Hello Redfish542,
I read your other posting with the indication that you determined the issue is not regarding the case on the device.
May I have you verify that wi-fi and Bluetooth is turned off on the device? Sometimes these technologies can effect the call quality. How many bars of signal do you have before and during the call? Is there a fluctuation between the to phones status? Another troubleshooting step you can try is to turn the volume down to medium & retest. If it's possible to post a picture of the icon that appears, that would be a great help.
I hope this information is helpful and addresses your concerns.

IPhone 5s, call quality, periodic echo

I upgraded from the iPhone 4 to the 5s 4 months ago. Ever since I upgraded, I have periodic issues with call quality. In the middle of a call I will all the sidden start to hear myself talk and the person on the other end cant hear me at all and I cant hear them. This happens to be in the Atlanta, GA area in the same places on interstate 75.

jab1820,
Thank you so much for reaching back out to us. Could you please provide us with your mailing zip code? With your iPhone 5s can you please reset your network settings. You can do this by going into Settings, General, Reset, Reset Network Settings. Then re-try the call quality after that reset has been completed. Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

IPhone 6 Call Quality Issues

iPhone 6 64gb 8.0
As of yet, I've not been able to make or receive a call without the other person sounding like they're three rooms away. I've turned up the volume on the side and within settings. I've turned the phone off and back on again.
I backed up this phone from my last iPhone (5) so that I have all my personalization and files, etc. on it now. I also took the SIM card from my old phone and put it in my new phone.
Everything else seems to work fairly well. It's just the call quality. I can hear what they're saying, They can hear me, but it seems like the volume is as low as it goes. But I know it's not.
HELP!

since I received my iPhone 6 Plus on Friday I've noticed that all of my phone calls have very bad audio quality. i thought it was just when I was talking to someone in a car. But it doesn't matter where they are.
WHat hat does it sound like:
its like a crappy digitized vrry tinny sound. It's as if the ither person is talking on a radio.

IPhone Poor Call Quality Without Headphones

I have an iPhone 4s. When I am working in my home office, the carrier signal level is good - typically three or four bars out of 5. However, the call quality is sometimes very poor - I can hear the other caller very clearly but they cannot hear me clearly and often say that it sounds like I am talking through a long tube or that my voice has some kind of metallic quality. However, when I plug my earphones in, it all works just fine. The call quality is generally fine in other locations.
I did wonder if this is something do to with the apple ambient noice cancelling system and some kind of interaction with it and the case that I am using but I have tested it with and without case and it makes no difference.
Any suggestions that you might have would be gratefully received.

I did they have know referred me to Apple!!!

Iphone 6 call quality issue....

Hi, yesterday i saw software update in my iphone 6 and i thought it will solve the call quality issue , but unfortunately it was not for that.
Dear iphone support , the call quality in iphone 6 is really bad, I was using iphone 4S and that had great voice quality. iphone 6 voice during call is not clear , it has noise .
When I told my friends about the problem , they told me that I might have bought the refurbish phone. But I bought it from Dubai in 750 USD and I do not think it would be the case.

Since my iPhone 6 has great Call Quality,
My tip would be to take it to an Apple shop. All apple Products have world wide warranty.
If it is really they should be able to fix it.
Hope this helps,

Error when calling a popup window in the initial screen of an application

Hi,
    I am calling a popup window in the Initial screen to select the variant list.
I am getting an error reference to Null Object reference.
Here is the Error.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Date and Time          15.06.2007 10:00:16
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_MESSAGE_AREA===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "SUPPLY_VIEW_DATA" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
"CL_WDR_MESSAGE_AREA===========CP" or "CL_WDR_MESSAGE_AREA===========CM00Q"
"SUPPLY_VIEW_DATA"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SUPPLY_VIEW_DATA" "(METHOD)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
To prevent the exception, note the following:
Looking for Ur valuable suggestions.
Cheers,
Sam

Hi Sam,
The correct code for creating a popup window will be:
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window         type ref to if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window         = lo_window_manager->create_window(
                     window_name            = 'WINDOW_NAME'
*                    title                  =
*                    close_in_any_case      = abap_true
                     message_display_mode   = if_wd_window=>co_msg_display_mode_selected
*                    close_button           = abap_true
                     button_kind            = if_wd_window=>co_buttons_okcancel
                     message_type           = if_wd_window=>co_msg_type_none
                     default_button         = if_wd_window=>co_button_ok
lo_window->open( ).
Hope this helps.
Regards,
Ram

Need to dynamically include an image file when calling a popup window

I am working on a web dynpro Java app which uses a button to call a popup window/view. Within the popup, I want to dynamically choose an image to show (from mime types) based on a criteria...there will be multiple buttons on the initial view that all call the same popup, but the popup will have content specific to which button called it (specifically the image embedded in the view).
My question is, what is the proper/best way to do this?
Here are some possible ways I can think of...
1. Pass a parameter from each button during the call of the event, but how does that get sent to the implementation of the second view for use in determining which image? And, how do I modify the source property of the image element based on that parameter?
2. Create multiple pages and views for each button to call...but this seems decidedly un-DRY.
3. Saw one posting on how to dynamically create a cached image...I could use different event handlers in the initial view, then load individual images from the mime library at that point...cache it into a hard-coded image name...then just call the identical view every time. Not sure this is even possible...input?
I don't know specifically how to implement any of these options, or know if there are other/better ways. Any help would be appreciated.

Just create a context attribute "imageFileName" in the component controller or a custom controller, map this attribute from both views (the one that contains the buttons and the one in the popup window that displays the image).
Now you can have an separate action for each button or one common action. In the first case just set the "imageFileName" inside the action handler for the specific button. In the second case use an action parameter "buttonId" and a parameter mapping
button.mappingOfOnAction().setParameter("buttonId", button.getId());
to determine which button triggered the action. After having checked which button was pressed, set the "imageFileName" accordingly.
Armin

How to disable 'Remove Hidden Information' popup when closing PDF in Acrobat X on Mac?

How do I disable the function that causes the 'Remove Hidden Information' popup when closing PDFs in Acrobat X? I'm using OS X 10.9.4 on a Mac?
I've searched online and was directed to Preferences>>Security (enhanced) to uncheck 'Unable Enhanced Security', but it wasn't checked.
This box (see screen shot) opens each time I close a PDF. I'm forced to select an option before closing.
Please help.
Thanks.

Go to the menu Acrobat>Preferences
In the Preferences window's "Categories" pane, select "Document"
In the "Hidden Information" section deselect both check boxes
Click the OK button
You should be good now.

Remove Call Quality Popup

Similar Messages

Maybe you are looking for