Remove Caller Name ID app

Agip_skf wrote:
Yes you can remove the app
1. Make sure mobile data is on and open the CALLER NAME ID app.
2. Go to ACCOUNT TOOLS and check your STATUS. If it says to SUBSCRIBE then that means that you have not been signed up for the service yet and simply hit the back
key and hit REMOVE APPLICATION.
3. If you see under your status that you have X amount of days left in your trial period then that means you have been signed up for the trial period. In this case just
unsubscribe and confirm, then hit the back key and hit REMOVE APPLICATION.
If you disabled the app then just enable it and remove.
This did not work there was no Remove Application Option.
LG 2 phone
app version 2.5.0
Branched from CALLER NAME ID APP...how do u uninstall it from ur Samsung Galaxy S3..it seems to have interrupted my text messaging
Message was edited by: Admin Moderator

Hi NotHAppyUser - Let's bring back the joy! What indication are you getting that the text messaging is affected? This application is pre-installed and may not be able to be removed from all devices. Is there an option for "Disable" in the same Menu option?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Similar Messages

Caller Name ID App

Yesterday, I received a blackberry update. When it finished, the update left an app called "Caller Name ID". Finally a message appeared saying the update installed a ten day free trial offer, but disappeared when I went to investigate. The app is on my phone, but when I hit the blackberry key, no option allows me to delete it. It seems I will just start getting charges for an app I do not want, if I can not figure how to get rid of it??? Can anyone help?

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB10040 How to view or remove installed applications on the BlackBerry smartphone
Hopefully it contains something useful!
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Disable Caller Name ID app on Kyocera Brigadier

I would like to disable this app but there is no straightforward way to do it in application manager that I can see. Why on some devices this is possible (found out via search) but not this one? I dont want any of the stupid verizon apps at all, and some of them you wont even let us disable? Is there another way to do this? I dont just want to "hide" it, I never want it to run period.

You cannot uninstall it. Are you referring to Caller Name ID or another app?

How to remove caller name id for incoming call?

When i get an incoming call, along with the ringtone the device also says the name if the caller. How can i remove it and just have the ringtone and no name being called out.

klc757,
Thank you for reaching out us. We understand the importance of being able to set phone up as wanted. From you are describing it sounds like your phone is in driving mode. Do you see a steering wheel picture in the top bar of your phone? If so then pull the top bar down and close out of it. When did this issue begin? If you do not see these characteristics please fill us in on when this issue began and what you were doing when it happened.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport

CALLER NAME ID APP...how do u uninstall it from ur Samsung Galaxy S3..it seems to have interrupted my text messaging

HOW U UNINSTALL THIS APP MY GALAXY S3 ISNT RECEIVING MY TEXT MESSAGES

Ann154
Settings > Apps > scroll over to the "All" tab > scroll down to the Caller ID app. Select it and touch the disable button. You'll might have to uninstall the updates before the disable option will be available.
This is not true as it still takes up 2M on my phone. How do you uninstall it?

New App "Caller Name ID": My business has wrong name

I got a new Note 3. I am using the "caller name ID" app. When I call my cell phone from my business it comes up as one of my clients names with my number..what the heck? How do I change the data in the database for the "caller name ID" app?......this is not the general caller id info...it just the data in this app that displays the wrong name....help!

Congratulations on your new phone, Pittsmaster! I was so in love with the Caller Name ID that I kept it after the free trial! Let me ask you this, is it your company? Have you tried to call a landline phone (that has caller ID) from the business phone to see if it appears the same?
TamaraH_VZW
Follow us on Twitter @VZWSupport

Caller Name ID alert does not clear

LG G2
Caller Name ID app is showing an alert in the upper left corner of screen. "1 Caller Name ID Result. Select to see all results." is displayed in alert list. When you select this, nothing happens. I did not sign up for this service and I cannot find an option to uninstall this app.
Caller Name ID App version (2.0.9 2013-06-13)
Does anyone know a way to disable/uninstall this app?
Thanks

Settings > applications or Apps > scroll over to the All tab > scroll down to the Caller ID app > select it > Uninstall updates if present > disable.
This steps might need adjusting based on your specific device.

How to remove sender name in field "From" in Notification page

I would like to remove name ( LIUNI, ANTONIO_ ) (bold text and underline) from message and field "From" in notification page.
I have 2 problems below:
1.) This message "_*LIUNI, ANTONIO*_ has completed their appraisal of KERINS, ANNE MARY"
Should change to "A multirater has completed their appraisal of KERINS, ANNE MARY"
2.) Field From, must be blank: From: LIUNI, ANTONIO_ -> From: <Blank>
It call standard workflow HRSSA.
Please provide me coding in controller to set item attribute values in field "From" to blank and remove sender name in message+
Below is the example notification:
This notification does not require a response.
LIUNI, ANTONIO_ has completed their appraisal of KERINS, ANNE MARY.
Personalize "Notification Details Function"
Personalize "Notification Details Attributes"
Personalize Table Layout: (leftTable)
From LIUNI, ANTONIO_
To BILLOUD, CLAIRE
Sent 26-Apr-2010 09:53:06
ID 66666475
Personalize Stack Layout: (rightStack)
Personalize Table Layout: (rightTable)
Personalize Stack Layout
Personalize Stack Layout
Personalize "Summary"
Edited by: jamras on Apr 26, 2010 1:34 AM

Thank you for your reply.
Do you mean region in notification page?
Below is region in notification page.
Field From is in Region: /oracle/apps/fnd/wf/worklist/webui/NtfDetailsAttr.leftTable
Document Name /oracle/apps/fnd/wf/worklist/webui/NtfDetailsAttr
Message is in Region: Notification Details Function
Document Name /oracle/apps/fnd/wf/worklist/webui/NotifDetailsRG
Now I'm working on extension controller in the page below (I'm submit button in this page).
/oracle/apps/per/selfservice/appraisals/webui/PartCompletePG
My controller -> fao.oracle.apps.per.selfservice.appraisals.webui.FaoPartCompleteCO
I put the following coding in this controller. It removed value in workflow attribute, but it didn't remove value from notification page.
SSHRParams sshrparams = new SSHRParams(oapagecontext.getRootApplicationModule());
String wfItemType = sshrparams.getItemType();
String wfItemKey = sshrparams.getItemKey();
// String wfProcess = "HR_APPRAISAL_DETAILS_JSP_PRC"; ///sshrparams.getProcesName().toString();
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"HR_APPRAISAL_FROM_USER_ATTR", "");
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"FORWARD_FROM_USERNAME", "");
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"FORWARD_FROM_DISPLAY_NAME", "");
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"FORWARD_FROM_PERSON_ID", "");
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"HR_APPRAISAL_FROM_NAME_ATTR", "");
Thank you for your help.

I removed my /Applications/Safari.app/Contents/Resources/.VideoCaptureFactory.* files and now Safari will not open. How do I fix this?

Hi,
In a stupid attempt to "fix" my computer, I removed my /Applications/Safari.app/Contents/Resources/.VideoCaptureFactory.* files (one was a .png and the other was a .xls).
I followed these steps:
Manual Removal Instructions
1. Run the following command in Terminal:
defaults read /Applications/Safari.app/Contents/Info LSEnvironment
2. Take note of the value, DYLD_INSERT_LIBRARIES
3. Proceed to step 8 if you got the following error message:
"The domain/default pair of (/Applications/Safari.app/Contents/Info, LSEnvironment) does not exist"
4. Otherwise, run the following command in Terminal:
grep -a -o '__ldpath__[ -~]*' %path_obtained_in_step2%
5. Take note of the value after "__ldpath__"
6. Run the following commands in Terminal (first make sure there is only one entry, from step 2):
sudo defaults delete /Applications/Safari.app/Contents/Info LSEnvironment
sudo chmod 644 /Applications/Safari.app/Contents/Info.plist
7. Delete the files obtained in steps 2 and 5
8. Run the following command in Terminal:
defaults read ~/.MacOSX/environment DYLD_INSERT_LIBRARIES
9. Take note of the result. Your system is already clean of this variant if you got an error message similar to the following:
"The domain/default pair of (/Users/joe/.MacOSX/environment, DYLD_INSERT_LIBRARIES) does not exist"
Is there a way to update my db to not look for this or did I remove something crucial to the functioning of Safari? I feel like an idiot.
Thanks for any help.
Sincerely,
Sterling MacNay

You installed a variant of what’s commonly called the “Flashback” or “Fakeflash” trojan, although the names are obsolete.
If you’re certain you know when that happened, and you back up with Time Machine or something similar, you can save yourself a lot of time by restoring your whole system from the most recent snapshot taken before it was infected. Then take Steps 7, 8, and 10 below.
How can you tell when the infection took place? All you can be sure of is that you were infected some time before the problems started. You may have visited a blog that prompted you to install some kind of software, or a “certificate.” You entered your administrator password when prompted. If you remember doing that recently, mention it in a reply, but don’t post a link.
If you don’t know when you were infected, there's no easy, reliable way to remove the malware, because it's constantly changing. There are differences of opinion on this site as to the best of course of action, so you should do your own research before deciding how to proceed.
I suggest you take the following steps:
1. Back up all data to at least two different devices, if you haven't already done so.
2. Boot from your recovery partition (if running Mac OS X 10.7 or later) or your installation disc (if running an earlier version of the Mac OS), launch Disk Utility, and erase the startup volume. This action will destroy all data on the volume, so you must be sure of your backups.
3. Install the Mac OS.
4. Reboot and go through the initial setup process to create an account with the same name as your old one. Don’t import anything from your backups at this stage.
5. If running Mac OS X 10.6.x or earlier, run Software Update. You may have to run it more than once to fully update your system.
6. Restore the contents of the top-level subfolders of your home folder except “Library” from the most recent backup. The Library folder may contain components of the malware. It’s best not to restore anything from there. If you must do so, restore only files, not whole folders with all their contents, and only if (a) they’re visible in the Finder, and (b) you know what they are, and (c) they haven’t been altered. Don’t restore anything in the home subfolder Library/LaunchAgents, if it exists, or any hidden files or folders, no matter where they are.
7. If you’re running Mac OS X 10.5.8 or earlier, launch Safari and select Safari ▹ Preferences… ▹ Security from the menu bar. Uncheck the box labeled Enable Java. Because of known bugs, Java in those OS versions is unsafe to use on the Internet. (Note: I’m not referring to JavaScript, which is unrelated to Java, despite the similar names.) If you’re running Mac OS 10.6.8 or later, you should still disable the Java web plugin unless you really need it. Few websites have legitimate Java content nowadays. If you encounter one that does, enable Java temporarily.
8. Change every Internet password you have, starting with banking passwords. Check all financial accounts for unauthorized transactions. Take this step only after you’ve secured your system in the preceding steps, not before.
9. Reinstall your third-party software from fresh downloads or original media, not from backups which may be contaminated.
10. If you use any third-party web browsers, disable Java in their preferences. As with step 7, this step is mandatory if you’re running any version of Mac OS X older than 10.6. Otherwise it’s optional, but recommended.

How do I remove my name from an ipod prior to donating it to someone?

I would like to donate my ipod touch to someone as I just bought another one. How do I remove my name from the device prior to donating it? I was able to remove all of my apps, music and videos but not the name.

Go into your settings>general>reset, then select Erase All Content and Settings.

Removing Checklist Name from Checklist Sheet

Hi, I am trying to use the checklist template from Numbers in iWorks 08 as an inventory sheet. I have tried unsuccessfully to remove the word "Checklist" that appears at the top of the page. It is almost hidden behind the top of the columns while editing the sheet, although when I print the page I have the word "Checklist" printed above the header.
Any ideas on removing this???

Ok... I feel like an idiot. I will answer my own question in hopes that this saves someone else from having to ask.
There is a checkbox all the way to the right on the toolbar called "Name" by removing the check from this box the name "Checklist" will be removed from the checklist sheet.
rack a frack a frick a frack...

My iphone donot appear the name of the caller although the caller name saved on my mobile

my iphone donot appear the name of the caller although the caller name saved on my mobile
if i save any number with its name.......when its number call me the name donot appear

Hello waleed101,
I would recommend force closing all open apps on your iPhone, then restarting.
iOS: Understanding multitasking
http://support.apple.com/kb/HT4211
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
Allen

Caller Name ID on DROID 4 disappears too quickly

I just added the Caller Name ID for Mobile Devices feature to my phone; when I get an incoming call, I briefly see a Network Message that shows who is calling but this message only stays up for about a second before it vanishes. If I'm not already staring at the phone, I'll miss the message because of the short display time of the message. Is there anyway to increase the timeout of the "Network Message" dialog that Caller Name ID uses?
I'm using a DROID 4 purchased from Verizon on March 2013; the device has not been rooted; the phone app and contact/people app is stock.

What type of PSTN circuit is this?
If its an FXO port, caller-id is not supported in MGCP.
If its a PRI, how is calling name being delivered? Display IE or facility IE? A "debug isdn q931" for an inbound call will show you this.

Show a different view when called from different app.

Hi,
I have the requirement of showing a different view in the same window when called from different apps (urls).
I have created different start-up inbound plugs and assigned them to the different apps but I can't figure out how to code the view switch.
Any idea?
thanks in advance,
David R.

hi,
It is possible.
Click on the Properties tab of application.In that screen click on the seach help option against Interface view.It will show all views you have created. Select the desired view to which the application has to point.
Don't forget to give the plug name which is under that interface view
Now the application invokes the new view which u have pointed.
If you have doubts in this please inform me.
Regards,
Ramanan
Edited by: Ramanan Panchabakesan on Sep 3, 2008 1:50 PM
Edited by: Ramanan Panchabakesan on Sep 3, 2008 1:51 PM

Disable calling name presentation on SPA-3102

Hi,
If I send a SIP INVITE to my SPA-3102, where the From header is like this -- (spaces inserted to stop the forum software treating it as an email address -- they're not there in the real invite)
From: Caller Name <01234567890 @ my.sip.server.net>;tag=as4b617ab1
-- the SPA-3102 generates a Caller ID spill on its FXS port with 'Caller Name' as the calling name, and '01234567890' as the calling number. That's all well and good.
If the From: header doesn't have a caller name, but is like this instead --
From: <01234567890 @ my.sip.server.net>;tag=as4b617ab1
-- the box sets the calling name to be 01234567890 as well.
Is there any way to turn that off, and have the SPA just not present a calling name at all?
If not, no bother! I'm just trying to get my box to behave a little more like BT with regards to caller ID presentation -- they don't ever send a reason for no calling *name*, but if the calling number is withheld or unavailable they will set the calling name to Withheld or Unavailable -- and set a reason for no calling number.
Many thanks!
Martin
Message was edited by: Martin Thorpe -- hopefully removed the auto-'email address' tagging! (Argh, no, it didn't. Bodged a different way.)

Hi Lindsey,
Thanks for the quick response. Here's a complete SIP invite -- I've changed the telephone number and put spaces around @ signs again, but everything else is unmodified.
INVITE sip:spa-line1 @ 81.2.113.115:5060 SIP/2.0
Via: SIP/2.0/UDP 81.187.239.177:5060;branch=z9hG4bK4062e0e9;rport
Max-Forwards: 70
From: ;tag=as75e22314
To:
Contact:
Call-ID: 445f75c33908fff74829a514159e9946 @ sentry.met24.net
CSeq: 102 INVITE
User-Agent: Asterisk
Date: Mon, 29 Oct 2012 19:51:07 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Type: application/sdp
Content-Length: 286
So there is a contact field in there as well.
That's from a slightly patched Asterisk server, which doesn't put a calling name in if it's blank -- by default if you didn't set a calling name, Asterisk will also set the calling name from the calling number and you'd get this instead:
From: "01234567890" ;tag=as54c7bb08
I've done product management myself so I know one customer asking for it to work a little differently (as opposed to it doing something wrong!) isn't going to make a change -- that's no problem at all. If it were to be changed, I'd rather the ATA didn't generate a calling name field in the CLID spill at all, rather than 'Unknown'. But hey, that's just my opinion!
For the avoidance of doubt, the ATA is always generating the calling *number* field in the CLID spill correctly.
Thanks again!
All the best,
Martin

Remove Caller Name ID app

Similar Messages

Maybe you are looking for