Remove Clip Name from Video

Hello,
I'm relatively new to using Premiere Pro. I have a video I am preparing for use on the web. After editing and saving as an .mp4 file, when I play it, using Windows Media Player, briefly (three seconds or so) it shows the Clip Name (file name) in the upper left hand area of the video. How can I stop this behavior?
Thank you for any and all help.
Tap

Thank you joe bloe!
For at least the past four hours, I have been searching Adobe Forums, Google, and checking everything under the sun within PP! I didn't find how to disable this under preferences for Media Player, but I did open up Quick Time and the Clip Name (file name) isn't there.
If you have the time, could you share the path to the Media Player > Preferences > Disable the Clip Name. I'm using Win 7 Professional, IE 10.
Again, thank you!
Tap

Similar Messages

How do I remove my name from an ipod prior to donating it to someone?

I would like to donate my ipod touch to someone as I just bought another one. How do I remove my name from the device prior to donating it? I was able to remove all of my apps, music and videos but not the name.

Go into your settings>general>reset, then select Erase All Content and Settings.

Removing camera flash from video

Is there a way to remove camera flash from video clips within PE8? If not natively, is there a plugin that can do this?
Thanks,
Steve

Here are the best answers that I can offer:
1) why do you go from Premiere Pro to Premiere Elements?
Actually, about 90% of my work is in PrPro. The rest is in AfterEffects, PrE and other NLE programs. Basically, I use those, including PrE, when they do something better than PrPro. PrE will accept a broader range of formats/CODEC's, than will PrPro, so I use it to Import those odd Assets, and get them ready for PrPro. Same with CyberLink's PowerDirector, and Magix MovieEdit Pro.
2) How do you synch the audio and video (I'm guessing that you record off-camera). I synch it by eye and ear and it can be tedious. I don't have time code synchronized equipment
Most of my shooting is actually done with camera audio capture, though usually through either a shotgun, or wireless mics, attached to and recording to the camera's tape. When I do separate audio & video capture, I slate, so that I have the visual and audio sync. When I am faced with having to do manual sync, I will look for the visual and then the accompanying audio, and just nudge and listen. This ARTICLE will give you some of the mechanics of the process.
3) I don't know much about DD 5.1 SS and this is just from the point of curiosity at present, can it be a problem keeping long clips in sync?
I do not record to DD 5.1 SS, as that is a very expensive and technically challenging process. It takes six well-designed and well-placed mics, a multi-channel recorder and a mixing panel, run by a skilled tech. My DD 5.1 SS Audio is with regard to the music for my Projects. Some of it is recorded as 6 discrete channels and then mixed, while some is faux 5.1 and is "created" from 2-channel source material.
Much of the work from Hollywood is actually faux 5.1, in that the source material is seldom recorded in 5.1. Most is stereo and mono, and is blended from myriad sources. These can be SFX, dialog, ambient audio. Most of those are mono TO separate them out from any other audio sources. Narration is a good example. Few audio techs, would consider using a stereo mic for narration and would choose a very directional mono mic, so as to better reject other audio signals.
Now, I can take a mono SFX file and pan/fade (not in the terms of a "fade" Transition, but front to rear location) it across/around the sound stage. I can place that bumblebee anywhere that I want, when I want it with 5.1 SS Audio. I'd almost always work with mono sources, so that I have the pure signal with no clues as to the source location - I set those in mixing.
I must add that with regard to mixing of music, there are constraints on doing faux 5.1. If the material was not recorded on multiple tracks to begin with, the RIAA, and other organizations, greatly frowns on creating a 5.1 "master." That came after the failed quadrophonics experiments from the '70s/'80s. With Hollywood's music, the recording IS done multi-track in the studio/symphony hall, so it IS multi-track and just gets mixed down to 5.1 Audio. This will be about the only time that the audio is done multi-channel in recording, as few environments lend themselves to doing 5.1 during the initial recording. There are exceptions, like live concerts, but that is almost a genre unto itself.
Sync, in and of itself, is not difficult to maintain, but so much depends on the recording equipment. Many, using separate cameras and recorders, often find that there is sync drift, and need to establish the % of "cure." In the old cine days, we hooked our camera to the Nagra recorder, and chose which unit's crystal clock would establish sync. Then, we had a cable between the two. Nowadays with digital, it seems a bit more difficult. There are several recent threads in the PrPro forum about the sync drift between pro-level cameras and recorders. One user has found that altering his recorder's output by 104% fixes the OOS issues. Others need to test critically. The sync clocks in different equipment just does not match up perfectly, and there is usually no universal crystal clock that overrides the internal ones - like in the "good old days."
Hope that this helps. If I missed something, please let me know,
Hunt

Removing my name from an Alias email

I have been unable to remove my name from the "FROM" in outgoing emails. U have deleted my name in the "FROM" box in the preferences with no luck.
Help...pf

Open address book. Find your own card in address book. Check if this email address is on your own card. If so, you just get your name displayed, as you and this email-address is in address book. Simply delete the email-address from your card, and you shouldn't see your name in "From" any more.

Preserve clip name from Premiere?

Hi,
Does anyone know a trick or script to preserve a clip name from Premiere when pasting into AE?
Not the file name, which is all I'm getting, but what you have renamed it in Premiere.
I know of renaming scripts for AE, but it's a bit of a pain to name clips twice.
It seems an easy bit of metadata to just follow your clips.
Thanks,
Andrew

Thank you joe bloe!
For at least the past four hours, I have been searching Adobe Forums, Google, and checking everything under the sun within PP! I didn't find how to disable this under preferences for Media Player, but I did open up Quick Time and the Clip Name (file name) isn't there.
If you have the time, could you share the path to the Media Player > Preferences > Disable the Clip Name. I'm using Win 7 Professional, IE 10.
Again, thank you!
Tap

How do I permanently remove a name from a group list?

I would like to permanently remove a name from a group list. I have highlighted and deleted and it still won't go away. I have deleted him from my address book but I cannot remove him from the group list.

There is the mailing list stored (which addressbook)? Perhaps the addressbook is read-only or unavailable?

Remove Printer Name from Crystal Report

How can i remove the printer name from the Crystal Report so that the PrinterName property of the CRAXDRT.Report object in the RDC SDK is blank WITHOUT having the "No Printer" Option checkbox checked?
Here's the scenerio. When I first create a Report and don't go into Page Setup, PrinterName property is blank. If I go into Page Setup and explicitly select a printer, PrinterName property equals the name of the printer selected. If I check the "No Printer" checkbox in Page Setup, PrinterName property is blank. But if i go back in and uncheck the "No Printer" checkbox in Page Setup, the PrinterName property equals the name of my Windows Default Printer.

I'm still not sure what is unclear about my first question. And I'm not sure how any of the info you are requesting is going to make any difference in answering my question. And I'm not sure how your analogy fits here but ..
Version of CR = 11.0.0.895
CR Service Packs applied = None
Web or Win app? = Win App
OS? = Windows XP Service Pack 3
Development language? = Both Visual Basic 6 and C#.Net 2008
Method of CR files deployment = email the .RPT file to a client
Where were the runtime files downloaded from? = Runtimes are installed from Merge Modules donwload from SAP site
What is the version of the craxdrt.dll on the deployed box? = 11.0.0.893
So here are the exact steps so you can understand what is going on:
I have the Crystal Reports Application open side-by-side with my Visual Basic development environment in debug mode so i can step through the code using the RDC SDK.
1. I open the Crystal Reports Application and create a brand new report - "Test.RPT" and DO NOT go into Page Setup at all and save the report.
2. In my Visual Basic development environment, i run the code that will generate the report, Here's the exact code
    Dim m_crApp As CRAXDRT.Application
    Dim m_crReport As CRAXDRT.Report
    Set m_crApp = New CRAXDRT.Application
    Set m_crReport = New CRAXDRT.Report
    Set m_crReport = m_crApp.OpenReport("Test.RPT")
3. When i look at the PrinterName property in the CRAXDRT.Report object, it is blank.
    ie. crReport.PrinterName is equal to ""
4. I reopen the Crystal Reports Application with report "Test.RPT" and go into Page Setup and check the "No Printer" option.
5. I go back into my Visual Basic development environment and rerun the code that will generate the report.
6. When i look at the PrinterName property in the CRAXDRT.Report object, it is still blank.
    ie. crReport.PrinterName is equal to ""
7. I reopen the Crystal Reports Application with report "Test.RPT" and go into Page Setup and uncheck the "No Printer" option. I have NOT specified any printer, nor have i clicked the "Printer..." button to setup a printer....i have just unchecked the "No Printer" option
8. I go back into my Visual Basic development environment and rerun the code that will generate the report.
9. When i look at the PrinterName property in the CRAXDRT.Report object, it is now set to my WINDOWS DEFAULT PRINTER, yet i had not specified any printer.
    ie. crReport.PrinterName is equal to "
MyNetwork\MyPrinter"
PROBLEMS:
1. The client needs the report to go to the default windows printer of their machine
2. If the "No Printer" Option is checked, the Report does not print at all
3. If the report is set to MY default windows printer and i give it to the client, at times it takes upwards of to a minute for the Print Dialog to disply. As i've read on other forum posts, it appears Crystal is looking for MY printer on the clients machine and takes a minute before i realizes it can't find it and then sets it to the CLIENTS default windows printer.
4. The client believes it is unreasonable to wait a minute for the print dialog to appear ...and i agree.
5. I cannot change the code to use the Select Printer in the RDC SDK - it's a long explanation why but just suffice it to say that i cannot do this.
All i want to do is either:
1. Remove the Printer Name in the actual report from the Crystal Reports designer - basically undoing what Crystal did when i went into Page Setup.
2. Via the RDC SDK, be able to detect the "No Printer" option is selected. Checkign CRAXDRT.PrinterName equal to "" is not an option.

Removing Checklist Name from Checklist Sheet

Hi, I am trying to use the checklist template from Numbers in iWorks 08 as an inventory sheet. I have tried unsuccessfully to remove the word "Checklist" that appears at the top of the page. It is almost hidden behind the top of the columns while editing the sheet, although when I print the page I have the word "Checklist" printed above the header.
Any ideas on removing this???

Ok... I feel like an idiot. I will answer my own question in hopes that this saves someone else from having to ask.
There is a checkbox all the way to the right on the toolbar called "Name" by removing the check from this box the name "Checklist" will be removed from the checklist sheet.
rack a frack a frick a frack...

How to remove database name from SQL query

We have an MS SQL server with several databases that are of the same schema but have different data. We do this for testing different environments. We are using Crystal reports for the first time and we are having trouble changing the database location in the designer. If update the data source location to the same database server, but different database name, the data still comes from the original database used when creating the report. We look at the SQL query and it contains the database name and does not change when updating the data source. Therefore the data always comes from the database used when originally creating the report.
How can I remove the database name from the SQL query so the proper database is used when testing the report?

Hi C F
Please ensure you have followed the procedure mentioned below:
In Crystal Reports, there are two ways to set the location of the data source your report points to, depending on your connection type.
For ODBC and Native Connections:
1. On the 'Database' menu, click 'Set Datasource Location'.
2. In the 'Current Data Source' section, click the data source to be changed. You must click each individual table in the data source one by one. If the data source is a stored procedure you will not see individual tables.
NOTE In Crystal Reports 10, XIR1, and XIR2, if you are mapping from a data source such as a stored procedure where the report designer can not determine which fields should be mapped automatically, you will see a 'Mapping' dialog box where you can manually map fields, as in the procedure cited above.
3. In the 'Replace with' section, click the data source you want the report to use.
4. Click 'Update'.
5. Close the 'Set Datasource Location' window.
The report now points to the new location.
For Native Connections Only:
1. On the 'Database' menu, click 'Set Datasource Location'.
2. In the 'Current Data Source' section, click 'Properties' to expand it and right-click 'Database Name: <path to database>'.
3. Click 'Edit' and then type the path to the
new data source location.
4. Close the 'Set Datasource Location' window.
The report now points to the new location.
Regards
Girish

Removing user name from sign-in window

Upon starting Skype my username appears in the sign-in window by default.
To stop this happening skype says: when skype is not running, in Finder click on Go, select Go To Folder, enter ~/Library/Application Support/Skype, and once there delete the folder bearing the username to be removed.
This works, but only until the user with that name signs-in. Thereafter the name reappears in the sign-in window.
Can a username be removed without having to follow this procedure every time the user logs out, please.
Skype 6.15 (335)
Mac OS 10.6.8

Never mind:
https://support.skype.com/en/faq/FA10876/How-can-I-remove-my-Skype-Name-from-the-sign-in-screen-in-S...

Burning clip name into video

Hi,
I have many short clips that I'm exporting for a director and was wondering if there was a setting I could take advantage of that would help burn the clip name into the picture.
They are all timelapse clips that I will upload online as one long video.
It would help our workflow to have the clip name present because the director/cinematographer could give me feed back on specific clips instead of referring to the timecode. I thought if it is just one click away it would streamline things a bit and save the time of creating seperate titles or scrolling through the timline in reference to timecode.
Thanks in advance for your Pr wisdom.
~Scott
p.s: I'm running CC

Hmmm ...I immediately thought of using the titler but you need a different "name" in each clip. Manually that would be a pita ... and I can see uses for that even with my small set-up, as for my interview and persona-stories work I frequently end up with sub-clips of this and that which need consideration for inclusion by at least one if not 2-3 other people.
If there's a way to simply burn the clip name into a proxy-like smallish outputtable file, that would be darn handy ...
Neil

Removing green background from videos (Chromakeying)

Hi,
I am currently trying to use JMF to remove green background from the videos I have recorded. I am trying to merge 2 videos ( 1 video in the background) and (this video w/green bacground removed in the foreground). Does merge.java from JMF do the job for the second part? Please help!!

Merging works only with one video sitting on top of another, but the top video positioned on the top left corner. Is there some way to have the top video positioned in the center? I am using the merge.java file from the JMF solutions. Any way to remove the green/blue background of a video using Java codes? Or is there a freeware tool to do so and then have the java program call it?

Is there any way to remove my name from the profil...

Is there any way to remove or prevent my profile from appearing in the profile search directory? I'm so tired of ALL the unwanted contact requests. Yeah I know I don't have to add them but this shouldnt even be a problem in the first place. If I want to add someone to add me I'll give them my skype name.

Hi, Phnxbane, and welcome to the Community,
You may certainly remove all profile data by leaving those settings as "blank" or "not specified." I find the easiest way to do this is to open the profile settings from within the Skype "client" software.
Removing/deleting an account name from the Skype search directory closes the account. More details about this can be found here: 'Can I delete my Skype account?'
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Nokia 6300: How do I remove a name from a dictiona...

Hi
I was hoping someone knows how to remove a word/name from the word prompter on my phone. That is when I type the keys on word prompt how do I remove a name I do not want to come up
Thanks
Lee

Hi,
Try this. Messaging> Message> Options> Prediction Off.

How to remove "Version Name" from contact sheets

When printing contact sheets, how do you remove the words"Version Name" from under each photo.
I just want my image numbers to be there such as JJC_3795. As it appears now is reads, Version Name:
JJC_3795. I went to Presets then to File Names hoping this would fix it, but can't figure out how to make that change. Maybe it's not possible???
Any help would be appreciated.

I don't think it is possible. What I have done is print to PDF and then (in Acrobat Pro) covered the "version name" part with a blank text field, white background, and done the physical printing from Acrobat.

Remove Clip Name from Video

Similar Messages

Maybe you are looking for