Remove Composites from being deployed in startup of soa server
Hi Is there a way to remove a composite being deployed in the start up of soa_server. I am getting an error while starting the soa server saying adf-config.xml not found for a particular composite. I want to force remove that composite from the startup so that the server starts.
Thanks
Ajay
Edited by: ajaykumar on Aug 20, 2010 9:57 AM
Any Help here ?
Similar Messages
-
How to keep an internal drive from being mounted on startup?
Other than opening the box and disconnecting them physically, how do I keep an internal drive from being mounted at startup? I have two problems:
1) despite having an SSD drive marked as the startup drive, I think one of my other drives is being considered first - startup takes a long time and it shows the gray circle with a line through it, before acquiescing into booting (rapidly and nicely) from the SSD drive. How do I make it ignore the other drives and go right for this?
2) when the system boots up, if I don't immediately dismount the internal drives (which I don't need most of the time), Time Machine and Spotlight begin going over them.
other than physically removing them, anything I can do in some OS X boot script to keep those drives from being mounted?Ok, I followed your directions (including de-seleccting and re-selecting the SSD as boot disk from System Preferences). Console: there was nothing under System Diagnostic Reports, but here's what the All Messages logs said after the Boot_Time that demonstrated my issue (3 min wait, then gray circle with a line through it, then finally rapid boot off the SSD). Is there anything here that shows what the heck it's doing before it actually boots off the SSD?
12/27/12 10:16:09 PM
bootlog[95]
BOOT_TIME: 1356664502 0
12/27/12 10:16:09 PM
com.apple.usbmuxd[77]
usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
12/27/12 10:16:09 PM
fseventsd[88]
event logs in /.fseventsd out of sync with volume. destroying old logs. (764 7 915)
12/27/12 10:16:09 PM
fseventsd[88]
log dir: /.fseventsd getting new uuid: 69C652CD-6886-4C24-962B-86FE77C3DFD3
12/27/12 10:16:09 PM
Parallels[126]
Unloading kernel extension prl_netbridge.kext
12/27/12 10:16:09 PM
com.apple.SystemStarter[78]
Starting APC PowerChute Personal Edition daemon
12/27/12 10:16:09 PM
com.apple.SystemStarter[78]
Starting the DynDNS Updater Daemon
12/27/12 10:16:09 PM
com.apple.SystemStarter[78]
Starting MySQL database server
12/27/12 10:16:09 PM
com.apple.SystemStarter[78]
Parallels Link-local IPv4 daemon v1.0.
12/27/12 10:16:09 PM
com.apple.SystemStarter[78]
Success: process 142 went to background
12/27/12 10:16:09 PM
com.apple.SystemStarter[78]
/usr/sbin/comapcpowerchutepe start: comapcpowerchute starting...
12/27/12 10:16:09 PM
sudo[134]
root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Applications/NETGEARGenie.app/Contents/MacOS/NETGEARGenieDaemon
12/27/12 10:16:09 PM
net.denyhosts[100]
Traceback (most recent call last):
12/27/12 10:16:09 PM
net.denyhosts[100]
File "/usr/local/bin/denyhosts.py", line 5, in <module>
12/27/12 10:16:09 PM
net.denyhosts[100]
import DenyHosts.python_version
12/27/12 10:16:09 PM
net.denyhosts[100]
ImportError: No module named DenyHosts.python_version
12/27/12 10:16:09 PM
net.denyhosts[100]
starting DenyHosts:
/usr/bin/env python /usr/local/bin/denyhosts.py --daemon --config=/usr/share/denyhosts/denyhosts.cfg
12/27/12 10:16:09 PM
Parallels[212]
Unloading kernel extension prl_vnic.kext
12/27/12 10:16:10 PM
com.apple.launchd[1]
(0x1005014a0.anonymous.nohup[242]) Bug: launchd_core_logic.c:8303 (24498):0
12/27/12 10:16:10 PM
com.apple.launchd[1]
(0x1005014a0.anonymous.nohup[242]) Switching sessions is not allowed in the system Mach bootstrap.
12/27/12 10:16:10 PM
com.apple.launchd[1]
(0x1005014a0.anonymous.nohup[242]) _vprocmgr_switch_to_session(): kr = 0x44c
12/27/12 10:16:10 PM
com.apple.launchd[1]
(0x100120790.anonymous.nohup[243]) Bug: launchd_core_logic.c:8303 (24498):0
12/27/12 10:16:10 PM
com.apple.launchd[1]
(0x100120790.anonymous.nohup[243]) Switching sessions is not allowed in the system Mach bootstrap.
12/27/12 10:16:10 PM
com.apple.launchd[1]
(0x100120790.anonymous.nohup[243]) _vprocmgr_switch_to_session(): kr = 0x44c
12/27/12 10:16:10 PM
Parallels[272]
Unloading kernel extension prl_usb_connect.kext
12/27/12 10:16:10 PM
Parallels[288]
Unloading kernel extension prl_hid_hook.kext
12/27/12 10:16:10 PM
Parallels[297]
Unloading kernel extension prl_hypervisor.kext
12/27/12 10:16:10 PM
Parallels[309]
Loading kernel extension prl_usb_connect.kext
12/27/12 10:16:10 PM
Parallels[317]
Loading kernel extension prl_hypervisor.kext
12/27/12 10:16:10 PM
kernel
Ethernet [Intel8254x]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [792d,af08,0de1,0e00,cde1,2c00]
12/27/12 10:16:11 PM
Parallels[328]
Loading kernel extension prl_hid_hook.kext
12/27/12 10:16:11 PM
Parallels[334]
Loading kernel extension prl_netbridge.kext
12/27/12 10:16:11 PM
kernel
/drv/ HypVtx.c:186 CPU is Intel
12/27/12 10:16:11 PM
kernel
/drv/ HypLowCache.c:193 Low cache initialized (35520 kB for 8 VMs on 4096 MB)
12/27/12 10:16:11 PM
kernel
/drv/ HypApic.c:211 Host APIC phy 0xFEE00000 lin 0x5dae1000 ver 0x14
12/27/12 10:16:11 PM
kernel
/drv/ HypVtd.c:3941 [vtdInit]
12/27/12 10:16:11 PM
kernel
/drv/ HypVtd.c:3957 [vtdInit] VTD initialization disabled
12/27/12 10:16:11 PM
kernel
/drv/ HypSMBios.c:54 Failed to find SMBios entry point
12/27/12 10:16:11 PM
kernel
/drv/ HypModule.c:184 Parallels IPI irq = 0 ipi = 0(0x0)
12/27/12 10:16:11 PM
kernel
/drv/ HypModule.c:194 Parallels Hypervisor 7.0.15107.796624 loaded.
12/27/12 10:16:11 PM
kernel
/prl_hid/ Parallels HID Helper started.
12/27/12 10:16:11 PM
Parallels[340]
Loading kernel extension prl_vnic.kext
12/27/12 10:16:11 PM
Parallels[345]
Trying to load kernel extensions, exit status: 0
12/27/12 10:16:11 PM
Parallels[348]
Starting Parallels networking...
12/27/12 10:16:11 PM
kernel
com.parallels.kext.prlnet 7.0.15107.796624 has started.
12/27/12 10:16:11 PM
kernel
com.parallels.kext.vnic 7.0.15107.796624 has started.
12/27/12 10:16:11 PM
kernel
com_parallels_kext_prl_vnic: created vnic0
12/27/12 10:16:11 PM
kernel
com_parallels_kext_prl_vnic: created vnic1
12/27/12 10:16:11 PM
Parallels[357]
Parallels networking sucessfully started
12/27/12 10:16:11 PM
Parallels[359]
Restarting CiscoVPN
12/27/12 10:16:11 PM
/Library/Parallels/Parallels Service.app/Contents/PlugIns/Parallels NAPT Service.app/Contents/MacOS/prl_naptd[355]
Starting Parallels Network Daemon
12/27/12 10:16:11 PM
SystemStarter[361]
Unknown service: CiscoVPN
12/27/12 10:16:11 PM
Parallels[364]
Starting Parallels Dispatcher Service
12/27/12 10:16:11 PM
Parallels[368]
Parallels Dispatcher Service sucessfully started
12/27/12 10:16:11 PM
/Library/Parallels/Parallels Service.app/Contents/PlugIns/Parallels NAPT Service.app/Contents/MacOS/prl_naptd[355]
vnic0: DHCP/NAT for 10.211.55.1-10.211.55.254 netmask 255.255.255.0
12/27/12 10:16:11 PM
/Library/Parallels/Parallels Service.app/Contents/PlugIns/Parallels NAPT Service.app/Contents/MacOS/prl_naptd[355]
vnic1: DHCP for 10.37.129.1-10.37.129.254 netmask 255.255.255.0
12/27/12 10:16:12 PM
kernel
/drv/ HypIoctls.c:779 Ioctl VT-d status: 0
12/27/12 10:16:12 PM
configd[14]
network configuration changed.
12/27/12 10:16:13 PM
com.bjango.istatmenusdaemon[103]
interface: en0
12/27/12 10:16:14 PM
com.apple.SecurityServer[31]
Session 0x52dc31 created
12/27/12 10:16:14 PM
com.apple.SecurityServer[31]
Session 0x52dc31 attributes 0x30
12/27/12 10:16:14 PM
com.apple.launchctl.LoginWindow[380]
launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
12/27/12 10:16:14 PM
com.apple.launchctl.LoginWindow[380]
launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.netgear.NETGEARGenie.plist
12/27/12 10:16:15 PM
loginwindow[84]
Login Window Started Security Agent
12/27/12 10:16:15 PM
WindowServer[138]
kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/27/12 10:16:15 PM
com.apple.WindowServer[138]
Thu Dec 27 22:16:15 ML-Home-Desktop-Mac.local WindowServer[138] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/27/12 10:16:15 PM
SecurityAgent[386]
Showing Login Window
12/27/12 10:16:15 PM
kernel
2.2.05 Little Snitch: connection deferred for:/usr/libexec/XProtectUpdater uid:0 to:23.48.94.224 :80
12/27/12 10:16:31 PM
kernel
[098db600][BNBTrackpadDevice::init][54] init is complete
12/27/12 10:16:31 PM
kernel
[098db600][BNBTrackpadDevice::probe][54] entered
12/27/12 10:16:32 PM
kernel
[098db600][BNBTrackpadDevice::handleStart][54] Done
12/27/12 10:16:32 PM
kernel
[0991b300][AppleMultitouchHIDEventDriver::start] entered
12/27/12 10:16:32 PM
kernel
[09982a00][AppleMultitouchDevice::start] entered
12/27/12 10:16:36 PM
kernel
[BNBTrackpadDevice][waitForHandshake][28-37-37-2a-41-a4] Timeout waiting for handshake
12/27/12 10:16:36 PM
kernel
[098db600][BNBTrackpadDevice::_simpleSetReport][54] ERROR: setReport returned error 0xe00002d6
12/27/12 10:16:36 PM
kernel
[098db600][BNBTrackpadDevice::_setMultitouchReportID][54] ERROR: _simpleSetReport returned error 0xe00002d6
12/27/12 10:16:36 PM
kernel
[098db600][BNBTrackpadDevice::_getMultitouchReportInfo][54] ERROR: _setMultitouchReportID returned error 0xe00002d6
12/27/12 10:16:36 PM
kernel
[09982a00][AppleMultitouchDevice::_getFeatureReportInfo] ERROR: getMultitouchReportInfo returned error 0xe00002d6
12/27/12 10:16:36 PM
kernel
[09982a00][AppleMultitouchDevice::_deviceGetReportWithLookUp] ERROR: _getFeatureReportInfo returned result 0xe00002d6
12/27/12 10:16:38 PM
kernel
[BNBTrackpadDevice][waitForHandshake][28-37-37-2a-41-a4] Became inactive waiting for handshake
12/27/12 10:16:38 PM
kernel
[09982a00][AppleMultitouchDevice::willTerminate] entered
12/27/12 10:16:38 PM
kernel
[BNBTrackpadDevice][setReportWL][28-37-37-2a-41-a4] Could not send DATA command via interrupt channel
12/27/12 10:16:38 PM
kernel
[098db600][BNBTrackpadDevice::_setMultitouchReportID][54] ERROR: _simpleSetReport returned error 0xe00002c0
12/27/12 10:16:38 PM
kernel
[098db600][BNBTrackpadDevice::_getMultitouchReportInfo][54] ERROR: _setMultitouchReportID returned error 0xe00002c0
12/27/12 10:16:38 PM
kernel
[09982a00][AppleMultitouchDevice::_getFeatureReportInfo] ERROR: getMultitouchReportInfo returned error 0xe00002c0
12/27/12 10:16:38 PM
kernel
[09982a00][AppleMultitouchDevice::_deviceGetReportWithLookUp] ERROR: _getFeatureReportInfo returned result 0xe00002c0
12/27/12 10:16:38 PM
kernel
[09982a00][AppleMultitouchDevice::stop] entered
12/27/12 10:16:50 PM
kernel
[0746a000][BNBTrackpadDevice::init][54] init is complete
12/27/12 10:16:50 PM
kernel
[0746a000][BNBTrackpadDevice::probe][54] entered
12/27/12 10:16:50 PM
kernel
[0746a000][BNBTrackpadDevice::handleStart][54] Done
12/27/12 10:16:50 PM
kernel
[09923800][AppleMultitouchHIDEventDriver::start] entered
12/27/12 10:16:51 PM
kernel
[098dc600][AppleMultitouchDevice::start] entered
12/27/12 10:16:54 PM
SecurityAgent[386]
User info context values set for mlevin
12/27/12 10:16:54 PM
authorizationhost[385]
Failed to authenticate user <mlevin> (tDirStatus: -14090).
12/27/12 10:16:59 PM
SecurityAgent[386]
User info context values set for mlevin
12/27/12 10:16:59 PM
SecurityAgent[386]
Login Window Showing Progress
12/27/12 10:16:59 PM
SecurityAgent[386]
Login Window done
12/27/12 10:16:59 PM
loginwindow[84]
Login Window - Returned from Security Agent
12/27/12 10:16:59 PM
loginwindow[84]
USER_PROCESS: 84 console
12/27/12 10:16:59 PM
com.parallels.vm.prl_naptd[355]
QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
12/27/12 10:16:59 PM
com.parallels.vm.prl_naptd[355]
QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
12/27/12 10:17:00 PM
com.apple.launchctl.Background[395]
launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
12/27/12 10:17:00 PM
com.apple.launchctl.Background[395]
launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.netgear.NETGEARGenie.plist
12/27/12 10:17:00 PM
com.apple.launchctl.Aqua[396]
launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
12/27/12 10:17:00 PM
com.apple.launchctl.Aqua[396]
launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.netgear.NETGEARGenie.plist
12/27/12 10:17:00 PM
com.apple.launchd.peruser.501[394]
(com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
12/27/12 10:17:00 PM
com.apple.launchd[1]
(com.apple.xprotectupdater[75]) Exited with exit code: 252
12/27/12 10:17:01 PM
SystemUIServer[400]
MenuCracker 2.2 (/Library/Application Support/iStat Menus 4/extras/MenuCracker.menu)
See http://sourceforge.net/projects/menucracker
MenuCracker is now loaded. Ready to accept new menu extras.
12/27/12 10:17:01 PM
SystemUIServer[400]
failed to instantiate and get the principal class of bundle: NSBundle </Library/Application Support/iStat Menus 4/extras/MenuCracker.menu> (loaded)
12/27/12 10:17:02 PM
SystemUIServer[400]
MenuCracker: Allowing "iStatMenusCPU".
12/27/12 10:17:02 PM
SystemUIServer[400]
MenuCracker: Allowing "iStatMenusDisks".
12/27/12 10:17:02 PM
SystemUIServer[400]
MenuCracker: Allowing "iStatMenusMemory".
12/27/12 10:17:02 PM
SystemUIServer[400]
MenuCracker: Allowing "iStatMenusNetwork".
12/27/12 10:17:02 PM
SystemUIServer[400]
MenuCracker: Allowing "iStatMenusTemps".
12/27/12 10:17:02 PM
SystemUIServer[400]
iStat Menus loading extra - cpu
12/27/12 10:17:02 PM
SystemUIServer[400]
iStat Menus loading extra - diskusage
12/27/12 10:17:02 PM
SystemUIServer[400]
iStat Menus loading extra - memory
12/27/12 10:17:02 PM
SystemUIServer[400]
iStat Menus loading extra - network
12/27/12 10:17:02 PM
com.apple.launchd.peruser.501[394]
(com.adobe.ARM.42ac9929a05cbdd7f58fd6e4e7b56fce8abf441e6bb086a4605d75e8[428]) posix_spawn("/Volumes/SSD disk's clone/Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper", ...): No such file or directory
12/27/12 10:17:02 PM
com.apple.launchd.peruser.501[394]
(com.adobe.ARM.42ac9929a05cbdd7f58fd6e4e7b56fce8abf441e6bb086a4605d75e8[428]) Exited with exit code: 1
12/27/12 10:17:02 PM
com.apple.launchd.peruser.501[394]
(com.adobe.ARM.3e1417e9549d2369b747c3eb25762e38be24fdd2f6636655133c410b[429]) posix_spawn("/Volumes/Primary 10.6 drive clone/Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper", ...): No such file or directory
12/27/12 10:17:02 PM
com.apple.launchd.peruser.501[394]
(com.adobe.ARM.3e1417e9549d2369b747c3eb25762e38be24fdd2f6636655133c410b[429]) Exited with exit code: 1
12/27/12 10:17:02 PM
/Library/Parallels/Parallels Service.app/Contents/PlugIns/Parallels NAPT Service.app/Contents/MacOS/prl_naptd[421]
Starting Parallels Network Daemon
12/27/12 10:17:02 PM
com.parallels.vm.prl_pcproxy[421]
QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
12/27/12 10:17:02 PM
com.parallels.vm.prl_pcproxy[421]
QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
12/27/12 10:17:02 PM
iStatMenusAgent[423]
Loading istat menus agent
12/27/12 10:17:02 PM
com.apple.launchd.peruser.501[394]
(com.apple.Kerberos.renew.plist[418]) Exited with exit code: 1
12/27/12 10:17:02 PM
iStatMenusAgent[423]
iStat Menus Agent version 4.03 (416)
12/27/12 10:17:02 PM
SystemUIServer[400]
iStat Menus loading extra - sensors
12/27/12 10:17:02 PM
sudo[439]
root : TTY=unknown ; PWD=/ ; USER=mlevin ; COMMAND=/bin/launchctl load /Library/LaunchAgents/com.parallels.vm.prl_pcproxy.plist
12/27/12 10:17:02 PM
sudo[443]
root : TTY=unknown ; PWD=/ ; USER=mlevin ; COMMAND=/bin/launchctl start com.parallels.vm.prl_pcproxy
12/27/12 10:17:03 PM
detectpen[452]
did set up runloop
12/27/12 10:17:03 PM
[0x0-0x16016].com.livescribe.PenAutoLaunch[447]
2012-12-27 22:17:03.080 detectpen[452:903] did set up runloop
12/27/12 10:17:03 PM
detectforcon[451]
did set up runloop
12/27/12 10:17:03 PM
detectpen[452]
did add service matching notification fun 0
12/27/12 10:17:03 PM
detectpen[452]
deviceFound, iterating
12/27/12 10:17:03 PM
[0x0-0x16016].com.livescribe.PenAutoLaunch[447]
2012-12-27 22:17:03.109 detectpen[452:903] did add service matching notification fun 0
12/27/12 10:17:03 PM
[0x0-0x16016].com.livescribe.PenAutoLaunch[447]
2012-12-27 22:17:03.110 detectpen[452:903] deviceFound, iterating
12/27/12 10:17:03 PM
[0x0-0x17017].com.livescribe.AutoLaunchForConnect[448]
2012-12-27 22:17:03.080 detectforcon[451:903] did set up runloop
12/27/12 10:17:03 PM
detectforcon[451]
did add service matching notification fun 0
12/27/12 10:17:03 PM
[0x0-0x17017].com.livescribe.AutoLaunchForConnect[448]
2012-12-27 22:17:03.124 detectforcon[451:903] did add service matching notification fun 0
12/27/12 10:17:03 PM
detectforcon[451]
deviceFound, iterating
12/27/12 10:17:03 PM
[0x0-0x17017].com.livescribe.AutoLaunchForConnect[448]
2012-12-27 22:17:03.134 detectforcon[451:903] deviceFound, iterating
12/27/12 10:17:04 PM
AutoLaunchForConnect[448]
exiting
12/27/12 10:17:04 PM
PenAutoLaunch[447]
exiting
12/27/12 10:17:09 PM
com.apple.Finder[401]
Dropbox: Entered INJECT_pthread_entry
12/27/12 10:17:09 PM
com.apple.Finder[401]
Dropbox: Installing event loop timer
12/27/12 10:17:09 PM
com.apple.Finder[401]
Dropbox: proc: 0x1016cbe53
12/27/12 10:17:09 PM
com.apple.Finder[401]
Dropbox: upp: 0x1016cbe53
12/27/12 10:17:09 PM
com.apple.Finder[401]
Dropbox: InstallEventLoopTimer: 0x7fff803fcdd8
12/27/12 10:17:09 PM
com.apple.Finder[401]
Dropbox: GetMainEventLoop: 0x7fff803fcc41
12/27/12 10:17:09 PM
com.apple.Finder[401]
Dropbox: timer installed!
12/27/12 10:17:09 PM
com.apple.Finder[401]
Dropbox: Loading /Library/DropboxHelperTools/Dropbox_u501/DropboxBundle.bundle/Contents/MacOS/Dr opboxBundle
12/27/12 10:17:09 PM
com.apple.Finder[401]
Dropbox: dlopen returned: 0x1014b3e40
12/27/12 10:17:09 PM
com.apple.Finder[401]
module initializer in main thread?: 1
12/27/12 10:17:17 PM
osascript[485]
Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
12/27/12 10:17:35 PM
osascript[487]
Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
12/27/12 10:17:41 PM
osascript[489]
Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
12/27/12 10:17:41 PM
com.apple.notifyd[12]
EV_DELETE failed for file watcher 22
12/27/12 10:17:41 PM
com.apple.notifyd[12]
EV_DELETE failed for file watcher 21
12/27/12 10:17:41 PM
com.apple.notifyd[12]
EV_DELETE failed for file watcher 20
12/27/12 10:17:41 PM
com.apple.notifyd[12]
EV_DELETE failed for file watcher 19
12/27/12 10:17:41 PM
com.apple.notifyd[12]
EV_DELETE failed for file watcher 18
12/27/12 10:17:41 PM
com.apple.notifyd[12]
EV_DELETE failed for file watcher 17
12/27/12 10:17:41 PM
com.apple.notifyd[12]
EV_DELETE failed for file watcher 16
12/27/12 10:17:41 PM
com.apple.notifyd[12]
EV_DELETE failed for file watcher 15
12/27/12 10:18:07 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:07 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:07 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:08 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:08 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:08 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:08 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:08 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:11 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:11 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:11 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:11 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:11 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:11 PM
mds[83]
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
12/27/12 10:18:25 PM
osascript[500]
Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax" -
When i download an application to my macbook, how do I remove it from being seen on my desktop?
When I download an external application, such as Sykpe, it goes directly to my desktop. How do I keep the application on my computer but remove it from being seen on my desktop?
Welcome to Apple Support Communities
You are probably referring to the DMG file in which Skype comes. First, open the DMG file and then, copy the Skype icon to the Applications folder or another one. Then, after doing that, you will have Skype installed. Finally, right-click the Skype option in the Desktop and choose "Eject" -
Remove data from hard drive without startup CD?
I have an old mac computer Tiger 10.4.1 which I am taking to be recycled. How do I erase or zero the hard drive? I do not have the original disk- the computer is 12 years old! This is just a personal computer but does have some sensitive data (one file only, actually). Cant I just drag the hard drive to the trash and empty it?
As WALTER-MILANO-ITALY indicated above, it is possible to gain access to the hard disk on another computer using FireWire target disk mode (if both machines have FireWire ports). A FireWire cable would be needed for this. See the manual for your computer(s) and the article below for details.
http://support.apple.com/manuals/
http://support.apple.com/kb/ht1661
In order to remove a hard drive, you would have to disassemble the computer. This can be more or less difficult (a quick look at ifixit.com should give you an idea about this) depending upon which model it is.
Once the hard drive has been removed, you can either keep it, erase/use it with another computer, or mechanically destroy it. If you wish to connect it to another computer, something like this example could be useful:
http://www.newertech.com/products/usb3_universaldriveadap.php
You are not supposed to drag a hard disk with an active system to the Trash. Dragging individual files to the Trash (and emptying the Trash) is not going to be sufficient, unless the space is overwritten. It is not wise to recycle a computer without having properly erased or removed the hard disk drive.
Jan -
Remove Quicktime from being the default player? I just want to download
Here's the deal, I'm trying download a file from this website "yousendit" and whenever I attempt to just download the file, the Quicktime 7 media player begins playing the file right away.
I don't want to watch the file, I want to download the file.
How I can change my settings on either quicktime or Windows Vista such that I can just download the file in the first place?
I'm running Windows Vista, and Quicktime version 7.
Halp!
LiaTry just right-clicking on the link to the downloaded file. In most browsers you'll get some variant of a command to download the file to your computer. That would bypass the QuickTime browser plugin.
Hope this helps. -
Add or remove applications from Startup in LION
We just did a migration from Tiger to Lion for our primary Mac user and now, on her new machine running Lion, Microsoft Excel and Microsoft Entourage launch every time she starts up her PC. Microsoft Excel was not even in her Startup on her old system.
I followed the instructions provided in this link: http://www.apple.com/findouthow/mac/#appstartup for adding and removing applications from a user's Startup in Lion. For this user, there are no Microsoft 2008 applications listed. She is the only user on the computer - there is a guest account that is shown but cannot be accessed or modified from the Users and Groups folder in System Preferences.
So, my question is: Is there another way to see what would be the equivalent of the "Startup" folder in Windows on an iMac running Lion? Or am I missing something? How did Excel get into Startup? How do I get it out?
MartyAs it turned out, I noticed that when you shut down or restart the computer, a question box comes up asking "Are you sure you want to restart/shutdown your computer now?" There is a check box next to the option "Reopen windows when logging back in", which is checked by default. I discovered that if you uncheck that box just one time, it will not attempt to open any applications that were open during any previous shutdown. It appears to sort of 'wipe the slate clean'. That is how I got it to stop launching Microsoft 2008 applications on every startup even when they were not in the user's Login Items. And they were not set for Open At Login.
This one led me a merry chase! Thanks to all who responded. -
How do I remove an item from being a purchase field?
I have several general questions in my form that should not be purchase fields. How do I remove them from being purchase fields?
On the Options tab, were you setup up the purchase fields, you can delete them by clicking the trash can.
Randy -
Composite with dependency not working after soa server restart
Hello,
I have composite application that invokes another composite application. After deploying those work fine. But after restarting soa server the one having dependency does not work any more. To soa server log I get following:
<Jul 1, 2010 11:45:29 AM EEST> <Error> <oracle.integration.platform> <SOA-20003> <Unable to register service.
oracle.fabric.common.FabricException: Error in getting XML input stream: http://Yacico:8001/soa-infra/services/default/validationForCC/getStatusByCC?WSDL: Response: '503: Service Unavailable' for url: 'http://Yacico:8001/soa-infra/services/default/validationForCC/getStatusByCC?WSDL'
at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:276)
Caused By: java.io.FileNotFoundException: Response: '503: Service Unavailable' for url: 'http://Yacico:8001/soa-infra/services/default/validationForCC/getStatusByCC?WSDL'
<Jul 1, 2010 11:45:30 AM EEST> <Error> <oracle.integration.platform> <SOA-20020> <Deployment of composite "POProcessing" failed: Unable to find a WSDL that has a definition for service {http://oracle.com/sca/soapservice/POProcessing/POProcessing/receivePO}receivePO and port execute_pt. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate the HTTP proxy settings for the server..>
So POProcessing does not work any more after server restart. validationForCC works fine also after server restart. Url http://...validationForCC/getStatusByCC?WSDL points to wsdl file and is visible by browser.
I use soa suite 11g patch set 2 (11.1.1.3) running on redhat enterprise linux 5.
Any idea what is the problem?
Is it somehow possible to configure which composites are started first during server startup?
regards, Matti
Edited by: user10197965 on Jul 1, 2010 2:28 AMYes, I did that. I'm not all that happy about this as a solution either, but it's better than making multiple copies.
We have since found out that his is a known bug and that it is fixed in some, but not all, deployments.
-------- see below -------------
Composites With WSDL Dependencies Fail To Deploy Following SOA Server Restart [ID 1272070.1]
Modified:Jul 19, 2012 Type:PROBLEM Status:MODERATED Priority:3
In this Document
Symptoms
Cause
Solution
References
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process and therefore has not been subject to an independent technical review.
Applies to:
Oracle SOA Platform - Version 11.1.1.3.0 and later
Information in this document applies to any platform.
Symptoms
A SOA Project has an external reference to a Web Service or a reference to another Composite.
When the SOA Server is started, the Composite is trying to access the WSDL of it's referenced Web Service in order to load data structures. If SOA can not find the WSDL then the Composite fails to load/deploy.
Once this happens the Composite can not be started, or shutdown, from Enterprise Manager Fusion Middleware Control Application.
Related Error Messages:
[ERROR] [SOA-20020] ... Unable to find a WSDL that has a definition for service ... Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate the HTTP proxy settings for the server.]
javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Error reading import of oramds
Cause
When SOA Server is restarting the Composite can not access the WSDL of it's referenced Web Service (it is not available).
In the first scenario there are two Composites on the same server: CompositeA and CompositeB.
In SOA Suite 11g there is no possibility to specify the load order for the composites. If CompositeA references CompositeB and if CompositeA is firstly loaded then it can not access the WSDL from CompositeB and the issue occurs.
In the second situation there is one Composite on the server (CompositeA) which references an external WebService (ExternalWS). If the ExternalWS is not available when the SOA Server is starting then this issue occurs.
Solution
Solution 1
Redeploy the affected Composite into the SOA Server.
You can do that but it is not advisable in a production environment and in a development environment it will take a lot of time to redeploy the composite manually
Solution 2
Copy the abstract WSDL locally into the project.
This is documented in these articles in our Knowledge base:
• Document:1155033.1 Node Restart Cause Composites To Become Unavailable. Response: '503: Service Unavailable'
• Document:1151973.1 Boot Order Of The Composites Upon Soa Suite Restart
Steps:
o a. Copy and use the WSDL file in the Project
o b. Edit the WebService Adapter
o c. Change the "WSDL URL" to point to the WSDL copied into the project
o d. Redeploy the Project
o e. Make this configuration with all the Projects that have a references with other Web Services
Solution 3
Use shared artifacts in Metadata Service (MDS). A WSDL used by more than one composite is a shared artifact per definition. If the WSDL structure is changed (that is not happening frequently in a production environment), you will normally deploy a composite with a new version because overwriting it will break your production environment. Moreover, in a development environment you will need a proper process in place where different developers access the same artifacts within MDS. In addition, when you use external WSDLs (owned by third parties), you will have a proper process/agreement in place to be notified about modifications affecting your applications.
1. In order to use shared artifacts a MDS connection must be configured in jDeveloper:
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10224/sca_lifecycle.htm#SOASE85488
2. Deploy the shared artifacts:
o a. Create a JAR profile and include the artifacts to share
o b. Create a SOA bundle that includes the JAR profile
o c. Deploy the SOA bundle to the application server
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10224/sca_lifecycle.htm#SOASE85472
If the shared artifacts (WSDLs) needed are from other composites this step can be skipped
3. Create a new WebService
o a. When completing the "WSDL URL" click on "Find existing WSDL's"
o b. Select "Resource Palette"
o c. Go to the SOA-MDS
o d. Select a WSDL from a Composite or the one deployed at step 2.
Known Restriction 1
The port and the location for the WSDL reference is not completed automatically by jDeveloper in the composite.xml file. This information must be inserted manually. In Bug:10287325 is raised this issue and it is available for SOA 11gPS2+.
Known Restriction 2
Another issue regarding MDS caching is raised in Bug:10218147 - the MDS cache is not refreshed when an artifact is deployed or deleted.
In order to refresh this cache the server must be restarted. This Bug resolves the issue but in a production environment the server restart will be the preferred option. The reason for that is because in a production environment you never deploy single composites under the same version after artifacts (WSDLs) have been modified.
The fix for the Bug:10218147 can be an acceptable solution in development environment where redeployment would be quicker than restarting the server.
Bug:10218147 is available for SOA 11gPS2+.
To find out more information about how to use Shared Metadata check the following documentation:
Oracle Fusion Middleware Developer's Guide for Oracle SOA Suite 11g
41 Deploying SOA Composite Applications
41.7.3 Deploying and Using Shared Metadata Across SOA Composite Applications in Oracle JDeveloper
URL:
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10224/sca_lifecycle.htm#CACFEAJJ
Solution 4
The last solution is to use an UDDI (Universal Description Discovery and Integration).
Oracle recommends Oracle Service Registry 11g (OSR). The advantage is that you can use OSR and SOA Suite in a Shared WebLogic Domain.
http://www.oracle.com/technetwork/middleware/registry/overview/index.html
http://blogs.oracle.com/governance/2010/05/oracle_service_registry_11gr1.html
To find out more information about Oracle Service Registry check the following documentation:
Oracle Fusion Middleware Administrator's Guide for Oracle SOA Suite 11g
33 Configuring Service and Reference Binding Components
33.1.3 Changing the Endpoint Reference and Service Key for Oracle Service Registry Integration
http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10226/bc_config.htm#SOAAG37248
Oracle Fusion Middleware Developer's Guide for Oracle SOA Suite 11g
A BPEL Process Activities and Services
A.4 Publishing and Browsing the Oracle Service Registry
http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10224/bp_appx_ref.htm#SOASE85561
Oracle Fusion Middleware Service Registry 11g
http://download.oracle.com/otndocs/tech/soa/OSR11gR1ProductDocumentation.pdf
Solution 5
In case you have BPM Components in the Composites deployed check the following note:
Document 1317803.1 Soa Suite Composite Fails To Deploy Upon Restart Of Managed Server
The issue is caused by the Bug:11822470 SOA SUITE COMPOSITE FAILS TO DEPLOY UPON RESTART OF MANAGED SERVER
References
BUG:10218147 - WSDL CHANGES NEED SOA SUITE SERVER RESTART
BUG:10278478 - WHEN SOA SERVER IS RESTARTED, SOME SOA COMPOSITES COULD NOT LOAD/BE DEPLOYED
BUG:10287325 - ABSTRACT WSDL NOT AVAILABLE WHEN COMPOSITE STARTED
BUG:10311698 - WHEN SOA SERVER IS RESTARTED, SOME SOA COMPOSITES CAN NOT BE STARTUP / SHUTDOWN
BUG:11822470 - SOA SUITE COMPOSITE FAILS TO DEPLOY UPON RESTART OF MANAGED SERVER
@ BUG:9267312 - MDS ARTIFACTS ARE STILL CACHED AFTER DELETING
@ BUG:9708488 - AFTER SOA RESTART, ALL PROCESSES HAVE TO BE REDEPLOYED
@ BUG:9749845 - SCHEMA CACHE STARTS EMPTY AFTER RE-START, BUT NOT AFTER DEPLOYMENT
NOTE:1151973.1 - Boot Order Of The Composites Upon Soa Suite Restart
NOTE:1155033.1 - Node Restart Cause Composites To Become Unavailable. Response: '503: Service Unavailable'
NOTE:1317803.1 - Soa Suite Composite Fails To Deploy Upon Restart Of Managed Server
Bug 11822470 : SOA SUITE COMPOSITE FAILS TO DEPLOY UPON RESTART OF MANAGED SERVER
Bug Attributes
Type B - Defect Fixed in Product Version 11.1.1.6
Severity 2 - Severe Loss of Service Product Version 11.1.1.4
Status 80 - Development to QA/Fix Delivered Internal Platform 912 - Microsoft Windows (32-bit)
Created Mar 1, 2011 Platform Version 2003
Updated Oct 12, 2012 Base Bug N/A
Database Version N/A Affects Platforms Generic
Product Source Oracle
Abstract: SOA SUITE COMPOSITE FAILS TO DEPLOY UPON RESTART OF MANAGED SERVER
*** 03/01/11 08:07 am ***
Customer has a project consists of two services for interaction with the
process and one reference to an external service.
On deployment of the process to an Enterprise Environment, the process works
as expected. However, upon a restart of the managed server, the process will
then fail to deploy.
Workaround used is to redeploy the project again.
Bug 10278478 : WHEN SOA SERVER IS RESTARTED, SOME SOA COMPOSITES COULD NOT LOAD/BE DEPLOYED
Bug Attributes
Type B - Defect Fixed in Product Version
Severity 2 - Severe Loss of Service Product Version 11.1.1.3.0
Status 92 - Closed, Not a Bug Platform 226 - Linux x86-64
Created Nov 10, 2010 Platform Version RED HAT ENTERPRISE LINUX 5
Updated Dec 10, 2010 Base Bug N/A
Database Version N/A Affects Platforms Generic
Product Source Oracle
Abstract: WHEN SOA SERVER IS RESTARTED, SOME SOA COMPOSITES COULD NOT LOAD/BE DEPLOYED
Detailed Problem Description
====================
When a SOA composite get dependencies with other SOA composites located on the same server, if the dependency is still not loaded, the SOA composite will not be loaded, and there is no possibilities for Entreprise Manager console to restart it (EM crash). The only way to make it working is to redeployed the SOA composite from jDeveloper that is not acceptable in a production environment.
The composite that has the issue cannot be start-up or shut-down, although the Enterprise Manager do not show any errors with it. -
Yet another error deploying BPEL process on SOA Suite 11g
Hi All,
I am getting the following error when trying to deploy a SOA composite from Jdev 11g (on XP) to SOA suite (on linux). Somehow the JDev is trying to create a connection to 3.3.3.27 which is the private IP of the soa server even though the connection is using the public IP. The application connection is successfully created and tested using the public IP address. Any idea where the private IP is being picked up from? There is no setup under the proxy in JDev preferences.
Thanks in advance.
[02:38:18 PM] >>>> Warning: Unable to determine the target platform from the Profile. Using default...
[02:38:18 PM] ---- Deployment started. ----
[02:38:18 PM] Target platform is (Weblogic 10.3).
[02:38:18 PM] Running dependency analysis...
[02:38:18 PM] Building...
[02:38:25 PM] Deploying profile...
[02:38:25 PM] Updating revision id for the SOA Project 'myFirstComposite.jpr' to '2.0'..
[02:38:26 PM] Wrote Archive Module to C:\bpel_11g\SOA-first-composite\myFirstComposite\deploy\sca_myFirstComposite_rev2.0.jar
[02:38:26 PM] Deploying sca_myFirstComposite_rev2.0.jar to soa_server1 [3.3.3.27:8001]
[02:38:26 PM] Processing sar=/C:/bpel_11g/SOA-first-composite/myFirstComposite/deploy/sca_myFirstComposite_rev2.0.jar
[02:38:26 PM] Adding sar file - C:\bpel_11g\SOA-first-composite\myFirstComposite\deploy\sca_myFirstComposite_rev2.0.jar
[02:38:26 PM] Preparing to send HTTP request for deployment
[02:38:26 PM] Creating HTTP connection to host:3.3.3.27, port:8001
[02:38:26 PM] Sending internal deployment descriptor
[02:38:26 PM] Sending archive - sca_myFirstComposite_rev2.0.jar
[02:38:46 PM] *Error sending deployment request to server soa_server1 [3.3.3.27:8001]
java.net.ConnectException: Connection timed out: connect*
[02:38:46 PM] Error sending deployment request to server soa_server1 [3.3.3.27:8001]
java.net.ConnectException: Connection timed out: connect
[02:38:46 PM] #### Deployment incomplete. ####
[02:38:46 PM] Error deploying archive file:/C:/bpel_11g/SOA-first-composite/myFirstComposite/deploy/sca_myFirstComposite_rev2.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)Thanks Baskar.
Added the IP to the hosts files per you suggestion - however still the same error. It's still trying to go to the private IP.
[09:43:59 AM] Error sending deployment request to server soa_server1 [3.3.3.27:8001] java.net.ConnectException: Connection timed out: connect -
EXCEPTION in deploying ear file on weblogic server 11g
Hi, I am trying to deploy an ear file on the weblogic server 11g(10.3.5) application installed successfully but when i tried to start application to listen service requests its throws exceptions and application state changed from prepared to failed
I have unchecked the check box Auto generate and synchronize weblogic JDBC descriptors during deployment in application properties under the deployment node. I also have created same jdbc datasource with name Connection1 and JINDI name jdbc/Connection1 on my weblogic server.
Exceptions that application throwing are.
Message icon - Error weblogic.common.ResourceException: java.security.PrivilegedActionException: weblogic.common.ResourceException: java.security.PrivilegedActionException: weblogic.common.ResourceException: No credential mapper entry found for password indirection user=hr for data source Connection1
But when I tried to deploy this from jdeveloper deployment console directly on the server it deployed successfully and starts listening requests.
please give me solution of this problem.
Thanks in advance
Edited by: Rao on Nov 29, 2012 10:22 AM
Edited by: Rao on Nov 29, 2012 10:23 AMI have resolved this exception. Exception occur due wrong settings in weblogig_Application.xml file remove Data source information from this file and provide datasource on weblogic server.
-
The full message reads as, "
Force Quit Applications
Your Mac OS X startup disk has no more space available for application memory.
To avoid problems with your computer, quit any applications you are not using. Closing windows and removing files from your startup disk will also help."
Currently I have:
Capacity: 319.73GB ; Available: 299.11GB ; Used: 20.62GB
Why am I receiving this message and being forced to force quit items? Both times the message has been received, Safari was open (frozen) while checking yahoo! mail.
I received my MacBook Pro as a gift less than a month ago and I have only saved 20 pictures within iPhoto and installed Skype and Vuze...no other modifications from default have been made.
Any idea?The full message reads as, "
Force Quit Applications
Your Mac OS X startup disk has no more space available for application memory.
To avoid problems with your computer, quit any applications you are not using. Closing windows and removing files from your startup disk will also help."
Currently I have:
Capacity: 319.73GB ; Available: 299.11GB ; Used: 20.62GB
Why am I receiving this message and being forced to force quit items? Both times the message has been received, Safari was open (frozen) while checking yahoo! mail.
I received my MacBook Pro as a gift less than a month ago and I have only saved 20 pictures within iPhoto and installed Skype and Vuze...no other modifications from default have been made.
Any idea? -
How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated
FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap. -
How can I remove files from the startup disk
I am getting a screen when I am trying to quit saying the "MAC OS X startup disk has no more space available for application memory" by closing the windows and removing files from the startup disk will help.
How do I do this?That error message is misleading. Your problem is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
In the Activity Monitor application, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
No partitions found ! error while deploying a soa composite from jdev
Hi,
I have an issue while deploying a composite from Jdev.
After selecting the server I am getting "No partitions found!" error in the SOA Servers step of the Deployment.
Followed this link ( Re: JDev PS2 (10.3.3) can't deploy SOA to WLS PS1 (10.3.2): No partititions! and changed the listen address from blank to localhost but still the issue persists.
The versions which we are using is
SOA suite version - 11.1.1.3
jdev version - 11.1.1.3.0
Please do let me know if anyone has any idea on this issue.
Thanks and Regards,
KaavyaHi Kaavya,
Make sure that hosts (C:\Windows\System32\drivers\etc\hosts) file has the entry for localhost -
127.0.0.1 localhostRegards,
Anuj -
How do I keep emails from being deleted on my iPhone 6? Emails get deleted from phone when I startup desktop computer and they are downloaded from sever. Is POP3 no longer supported on IOS 8.1?
Have you seen this?
Using a POP account with more than one device - Apple Support
A better solution is if your email provider uses IMAP. IMAP sync email folders between multiple devices. Meaning any device will receive the email, all sent email can be seen on the devices. If you delete email from one device the email is deleted from all the other devices. Check with your email provider to see if they offer IMAP services.
If they do not your choices are to 1) configure email on the PC to keep Mail on the mail server or 2) change email providers to something like Gmail or Outlook.com (as examples). FWIW I use Cox IMAP email and fully sync email between a Win 8.1 Update 1 laptop, a Win 7 desktop, an iPad 4, an iPhone 4 and an iPhone 5S.
Maybe you are looking for
-
How do I get CTRL + 0 to work?
I just upgraded to PSE 11 and can't get CTRL + 0 (zero) to work. My OS is Windows Vista. I have friends who are using Windows 7 and it works for them. I use CTRL + 0 all the time and need it to work with PSE 11. Is there anyone out there who can
-
It keeps telling me it wants to delete everything off of my I touch. I can't get the music I bought on this I touch to be copied into my I-Tunes. I don't want to delete everything off this I touch. I've got a new Nano, and I want to transfer the ol
-
Hello. I want to make an extraction from an ODS object with some dynamic selection. What are the oppotiunities to do it? Is it possible to do a process chain with dynamic selection? Is there an API or function, that could set Parameters Values for th
-
Convert PDF to Microsoft Powerpoint
I cant find where to comvert PDF to Powerpoint, I have word and excel
-
Way is it when i want to watch a video, all i see is a sigh that says "blocked plug-in" ?
when i want to watch a video all i see is this "blocked plug-ins" what are plug-ins?