Remove custom messge

Hello,
I lost my phone, and sent a custom message to the phone. The person who found the phone, was kind to return the phone to me.
But how do I remove the message from the screen? It stays on the screen. When I login with my BB ID on the website, I can send a new one, but I cannot remove it.
How to remove the message from the screen?
Thanks.

ok, problem solved. I had to make a new message, and then it worked. It asked me the new password, and now it disappeared. Why it did not work the first time I do not know
Topic can be closed.

Similar Messages

Remove custom field instead of default text field

I need migrate to SharePint 2013 from 2007.
In SharePoint 2007 List include a custom field.
Dont use the custom field again,
I want remove custom field instead of default text field (remain metadata).
How to do it ?
Thanks

Hi ,
According to your description, my understanding is that you want to migrate SharePoint from 2007 to 2013 with managed metadata column. Is it right?
If you need to migrate managed metadata columns, you also need to migrate the Managed Metadata Service application. however, when you use this method, only global terms are available but the local terms are not available.
So, if you used the local terms for the managed metadata column, I suggest you use a third party tool or manually re-create the column in the destination list.
There are some articles about migrating managed columns, please take a look at:
http://sharepointconnoisseur.blogspot.jp/2012/06/migrate-sharepoint-2010-content-with.html
http://www.metalogix.com/help/Content%20Matrix%20Console/SharePoint%20Edition/002_HowTo/003_MigrationActions/011_CopyTaxonomy.htm
http://www.quest.com/tv/All-Videos/1749994742001/Migrating-to-SharePoint-Managed-Metadata-Columns-with-Migration-Suite-for-SharePoint/Video/
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Not able to add taxonomy Control(Activex Control) under Add /remove Custom Controls in infopath 2010

Hi ,
Not able to add taxonomy control(activex Control) , under Add/Remove Custom controls in infopath 2010 ..i'm getting the fallowing error ..
error:This control could not be added through custon control wizard,to use this control go to Controls gallery in home tab.
Regards
Giriraj

Hi,
I am getting same error while adding contact selector control. And this control is not visilb in controls gallery on home tab. Please help. Thanks!
Gaurav

Removing custom camera profiles

I am running windows 7. How do I remove custom camera profiles created by x-rite passport?
thanks,
Randy

Randy,
Be careful deleting profiles, particularly from the OS. I think the x-rite manager actually hides profiles instead of deleting them which is probably just fine.
Regarding actual deletion, I am not certain so please test this - if the profiles are not being used by any images, deleting should not be a problem. If some images are using them however and the profiles are deleted, the next time that image renders it won't be able to find the profile and will have to render using an Adobe default color profile. To compound this problem, there is no easy way to filter by color profile (a couple of plug-ins exist I think) so it becomes difficult to know if it a particular profile is being used.
One way around this, again I believe this is correct but please test for yourself, is that if you use the DNG format for your RAW images, when you update the DNG Preview (instead of Ctrl-S) you embed the color profile into the image and therefor you can delete them. This can be handy when you have one-time uses for the special color profiles.
Jeff

How to remove custom authentication provider in weblogic server 11g

Hi ,
I am trying to remove the custom authentication provider in weblogic server 11g, It disappears when i delete it from list of authentication providers. But upon server restart it appears again.
Documentation for 10g says delete it from service administration but i couldn't find one in 11g. Please help me in removing the custom authentication provider
Thanks
Sandeep

You can try editing the config.xml file and removing it there. (Re: After provider reorder I cannot login admin server console
If you are referring to a jar file - custom authenticators are usually placed in the <middleware-home>wlserver_10.3/server/lib/mbeantypes/ directory.

Delete or unsync or remove custom ringtone from iphone 4s

I bought iphone 4s and I've added a custom ringtone .m4r and now I can't remove it?
I tried everyting of unsyncing to deleting the actual rintone file from the PC but it still appears in my iphone 4s?
No ringtones appear in itunes under the iphone or even libaray yet it stayed in my ipgone
Any advise?
Thank you.

In response to Ocean20...IT WORKED!!! Thanks a million! I tried 3-4 different suggestions people had posted, but none worked. Thanks again!

How do I add and remove custom mail sounds

I have a custom mail sound that I would like to remove from Apple mail. I have another sound that I would like to add to mail.
There was a web site that explained how to do this for 10.4 but I cannot find a procedure for doing it with 10.5.

I'm wondering if Apple changed how these sounds are done from 10.4 to 10.5
I actually replaced one custom sound with the very same custom sound, this seems to have solved my problem.
Thank you for taking the time to help me.

Remove custom captions from cache, CS5

I created a number of custom captions in CS5. The captions work fine but are no longer needed. I removed their .bmp and .fcm files from the Gallery\Captions folder but the captions still appear in the Caption Type drop-down list. I can't seem to get rid of these unwanted captions. They seemed to be cached in a mysterious location and refuse to go away. I have cleared project cached files, uninstalled/re-installed Captivate 5, exited/entered new projects, rebooted the PC, and scanned the PC registry. How do I remove these captions?
Other recent postings have raised this same issue but I couldn't find any answers.

Hello,
I think your are pointing at Captivate 5 (Captivate is not part of a Creative suite, so the 'CS5' doesn't apply to it)?
Did you try to delete the Preferences folder in CP5? This has to be done while CP is not running. It depends on your OS. I'm on Windows 7 and the folder 'Captivate 5' can be found there in this path:
C:\Users\YourProfile\AppData\Local\Adobe if Windows is installed on C: Replace 'YourProfile' by your username
You can delete the folder, but will lose all your preferences. When restarting CP a new folder will be created. This replaces the "*.dat" file from previous versions.
Lilybiri

Remove custom aspect ratio

Hi all,
I set up some custom aspect ratios in the crop and straighten tool window for a project I was working on. Now that I'm done w/ them I would like to remove them from the drop down menu. Can some one tell me how this is done?
Thanks,
Mike

As Pete says, they get overwritten with new ones, but that only answers the question indirectly. You can't remove them from the list and make the list empty, except by deleting the preference file. This removes all customisation though, and returns Lightroom to first install preferences. Not something to do lightly, because all of the print/slideshow/web settings you've used are stored there also.

Remove custom scaling DAQmx

What I am working on is a calibration VI so that a user may come up with scales for different channels in their DAQ tasks which they create in MAX. When I start my VI, I create a copy of the existing task from MAX because that task includes the channels to calibrate. But, in creating this copy, my virtual task includes the scaling. I want to remove this so I get raw voltages. How can I do this?
Essentially I want to programmatically set <No Scale> the same way you can in MAX.
My not-so-valid attempt. I was hoping "no scale" was a custom scale.
CLA, LabVIEW Versions 2010-2013
Attachments:
scaling.PNG ‏20 KB

I actually have tried that and it seemed like it didn't work. But I will try again. I tried just to make a scale that went by increments of 1. I was somewhat rushed so I may have had something set up wrong, but from what I remember the data was still being scaled.
CLA, LabVIEW Versions 2010-2013

Remove custom attribute labels

Hi.
Does anybody know how remove the custom attribute labels on a page.
Thanks
Portal version 9.0.2.6.18 and 9.0.4.0 (10g)

Try below:
http://www.harbar.net/archive/2012/07/23/sp13adi.aspx
http://social.technet.microsoft.com/Forums/office/en-US/d183d133-7fdd-4053-a2ef-dd09b892bf33/error-when-i-get-the-custom-property-an-administrator-must-create-this-property-in-the-profile?forum=sharepointdevelopmentprevious
This error indicated that the property is not exist in the UserProfile properties. I think you need first to check out the "ZipCode" has been created in your default user profile.
Create custom profile property:
http://technet.microsoft.com/en-us/library/cc262327.aspx#create
In code, it is a good practice to make sure the specific property whether it exists or not.
SPSite site = new SPSite(SPApplicationRootUrl);
SPServiceContext serviceContext = SPServiceContext.GetContext(site);
UserProfileConfigManager profileConfigManager = new UserProfileConfigManager(serviceContext);
ProfilePropertyManager profilePropertyManager = profileConfigManager.ProfilePropertyManager;
CorePropertyManager corePropertyManager = profilePropertyManager.GetCoreProperties();
CoreProperty coreProperty = corePropertyManager.GetPropertyByName("ZipCode");
if (coreProperty != null)
Also you can try to create your custom property in code behind:
http://www.sharemuch.com/2010/03/30/how-to-create-custom-sharepoint-2010-user-profile-properties-programatically/
Hope this can help.
If this helped you resolve your issue, please mark it Answered

How do I remove custom .exe icon?

I used a custom icon for publishing a set of recordings. I need to rebrand these and cannot remove the custom icon file designation. I tried removing the file path from the Publish dialog, but it refused to unlink that ico file and the file path persists no matter what I do. I was able to make it generate a "generic" icon by selecting an invalid file as the ico, but thats a poor solution.
So, how do I get a recording to 'forget" it had a custom icon?
Captivate 7 build 7.0.0.118
Thank you

Hello ,
I don't think you will be able to remove that custom icon , But you can use any of your designed icon having an extension as .ico .
Thanks and Regards
Himanshu Satija

How to Remove Custom Tracking and Leading

Hi, I am trying to edit a long document in InDesign which has already had a lot of custom tracking and leading applied to it in order to correct the "widows and orphans" in it. I want to remove all those custom changes in order to edit the text, and then reapply them as I reset the text in InDesign afterwards. Can someone tell me what is the easiest and quickest way of identifying and removing those custom changes (mainly tracking and leading) in InDesign?

I want to remove all those custom changes in order to edit the text, and then reapply them as I reset the text in InDesign afterwards. Can someone tell me what is the easiest and quickest way of identifying and removing those custom changes (mainly tracking and leading) in InDesign?
Well, assuming you want to reapply custom tracking & kerning manually, then
Find any character - ^? in the FInd window
Leave the "Change to" field blank and specify Kerning of Metrics and Tracking of 0 in the "Change Format" area

Remove custom masthead for administrator

Hi,
we developed custom mast head ,and in the master rule, we kept for "administrator: it should display as normal portal(with content ,user,system admin).. and its working fine.
now we added one more group to master rule to display custom masthead ,because of this ( i am not sure-this is the only change we did) now when i login with 'administrator' i am getting custom mast head instead of normal portal .
please let me know how 'administrator' can get normal portal screen , now?
Thanks
Surya

hi
If the group contains administrator also,then custom musthead also applicable to administrator,thats why it showing custom one.
Custom masthead rule you applied to the group is having the highest priority so when the administrator logs into the portal custom rule will be executed.(group contains administrator)
one more thing,
If multiple conditions apply to a user [ administraor,group(which includes administrator in your case) ] , the rule that is listed first will be applied when administrator logs in..(custom rule in your case)
if this is not the case try to restart the portal..
if you want to display default rule to administrator,
Replace the positions of cutom rule (2nd) and default one.(must be in 1st )
check if expression ,you have to add administrator as user (in if condition)and apply default rule in then condition.
and it must be first Rule collection in the order.
or
remove administrator user from Group..
Regards
sowmya.

How do I remove custom access on a networked external drive?

My external drive (1 partition, named Zumtobel) is networked to my MacBook. It is USB connected to Airport Extreme. Everything works perfectly -- including Time Machine -- even though TM is always wanting to redo the backup to ensure accuracy.. But the info pane on Zumtobel shows that I have custom access. There is no padlock. Greyed out is Everyone showing no access.
I am pretty sure I know what caused the problem. When setting up the drive, I had it USB connected to my MacBook. I then reconnected it to the Airport Extreme, set up Time Machine, and put on a bunch of media files. Instead, I should have started from scratch with the drive first connected to Airport Extreme and then partitioning with Disk Utility before I installed Time Machine and the media files.
Now, when I remove the external drive and USB connect it to my MacBook, the padlock and all my options for sharing and permissions all appear.
My question now is that without having to start again back at square one, repetitioning the drive off Airport Extreme, is there a way to remove the custom access by using commands in Terminal? Or any other way without destroying data on the external drive?

1 go to Terminal.
2 type 'man chmod'.
3 navigate in the command line to the drive you want to update.
4 use what you learned from the man pages.

Remove custom messge

Similar Messages

Maybe you are looking for