Remove/delete duplicate cash flows on facility

Hi all
Due to a error in SAP std, for a facility a number of duplicate commision flows are created when drawing a contract against a facility. The issue is solved with the implementation of SAP note 1389873 so no more duplicates are created.  Is there a way that I can remove/delete/reset a spesific cashflow manually?  I would like to avoid to have a it removed directly from the table(s)

Hi,
OK, since SAP given solution for avoiding creation of new flows, it should work with change mode of transaction as well. Try to reset the flows in trasaction if the flows are still scheduled. You cannot seperate flows with same date & update type from activity posting/marked as posting. TBB1_LC can be used for marking flows as fixed. Also, there is a function for reversing flows from Cash flow tab of transaction for money market products. Please check that as well.
And finally, the possible solution will be reverse the entire transaction and create a new one instead.
Regards
Prasad AV

Similar Messages

  • HT4191 How do I get to "When prompted, select Delete Notes to remove the duplicates from the device."?  I can't get to this!

    I have duplicate Notes on my iphone 4 (upgraded to iOS 5.1.1)  I have followed your instructions to remove the duplicates.  How do I get "select Detete Notes" to appear on my Mac?  I have connected my phone to my Mac and selected it in iTunes.  I clicked the Info pane and deselected the option to Sync Notes.  THEN WHAT should I do?  How do I get the prompt "Select Delete Notes to remove the duplicates from the device.  (I do want to sync them using the over-the-air feature.)

    I would try the following:
    First sync your phone with iTunes to create a new backup (just in case).  When done, disconnect your phone from your computer.
    Next be sure that all of your Notes are on your mac (Don't proceed any further if they aren't).  If so, turn off iCloud syncing for Notes on your phone go to Settings>iCloud and turning Notes to Off.  When prompted choose to delete the notes from your phone.
    Next, without connecting your phone to your computer, open iTunes and go to iTunes>Preferences, on the Devices tab check "Prevent...from syncing automatically".
    Now connect your phone to your computer, click on the name of your phone when it appears in iTunes on the left sidebar.
    Go to the Info tab and under Other check Sync Notes, then further down under Advanced: Replace information on this iPhone, check Notes.
    Click Apply at the bottom right to sync your phone.  This should sync the Notes from your mac to your phone and you should no longer have duplicate Notes.
    Next, on the Info tab uncheck Sync Notes and click Apply, when prompted select to keep the Notes on your phone (haven't tested this step but I believe you will be given the option to keep them on your phone).
    Now disconnect your phone from your computer and check the Notes on your phone to confirm that they are still there and that you don't have any duplicates.
    Next turn on iCloud syncing on your phone again by going to Settings>iCloud and turning Notes to On.
    On your computer, without connecting your phone, go back to iTunes>Preferences>Devices and uncheck "Prevent…from syncing automatically" to re-enable automatic syncing.
    That should do it.

  • Duplicated Posting on Cash Flow

    Good afternoon,
    We have in our company, on money market of TRM, bilateral facility for
    the intercompany loans to control taxes. We noticed that after applying
    support package 15, the flows for the first condition keeps being
    generated in parallel with the flows for the second condition in the
    cash flow.
    We apply the notes 1298195, 1326397 and 1389873. The problem of
    duplicated flows was resolved, I mean, they are no longer being
    duplicated. But the flows that already were duplicates continued in
    the cash flow, which can't happen.
    Please, how we can remove these duplicate entries of cash flow? Exists
    some note or procedure for to remove these flows?
    Best regards.

    Hello Prasad,
    Thank you for your feedback. I had already opened a message in the service market place. I'm now waiting for a solution for this problem.
    Thanks a lot.
    Regards,
    Rodrigo Soares

  • How can i delete duplicates from my itunes account?

    At "View" I chose "Show duplicates."
    Now what do I do to delete duplicates quickly without having to delete each one separately?
    THanks

    Hello, singinheart. 
    Thank you for the question.  Since you have already identified the duplicate media you just have a couple more steps to go.  This article outlines the remainder of the steps in order to mass delete the duplicates. 
    How to find and remove duplicate items in your iTunes library
    http://support.apple.com/kb/ht2905
    Cheers,
    Jason H. 

  • How do you delete duplicate songs in your library without having to delete each song individually??

    How do you delete duplicate songs in your library without having to delete each song individually?

    mauijiminar wrote:
    Go to iTunes, select view and click show duplicates. Hold control and A ( select all) and then delete.
    Not a good idea! The "show duplicates" feature shows "all" duplicate tracks, but you only want to delete the "extra" copies, not the "originals".
    I've written a script called DeDuper which can help remove unwanted duplicates. See this  thread for background, including how to delete the extra tracks manually if you prefer.
    tt2

  • How do I delete duplicate songs from my library that have been automaticly downloaded from itunes?

    How do you delete duplicate songs from an iphone 3gs?  I did the automaticly download song feature when doawloading from my CPU and now there are 11 songs that no matter what I do will not come off my phone.  I have tried everything.  Also how do you shut off this automatic download feature?

    Hello momoandfam,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it’ll answer your questions about finding and deleting duplicate tracks in your iTunes library.
    Find and remove duplicate items in your iTunes library - Apple Support
    Take care,
    -Jason

  • How do I delete duplicate songs on my iPod that do not appear in my iTunes?

    I recently had an interrupted iTunes update that really messed up my iPod Touch. I had to restore it to "factory settings" (it has since been running a lot slower than it was before) and it duplicated over half of my songs, which takes up a significant amount of my storage. Today I tried un-selecting all of my songs in my iTunes Library in hopes of also removing the duplicates, but no such luck - everything was removed from my iPod EXCEPT the duplicates, and as far as can I see there's no way of deleting the extras from my actual iPod.
    I've tried everything I could think of. I even selected "Music" under my iTunes Library, "View", and "Show Duplicate Items". However, not even a single one of the "duplicate" items on this list are the duplicated songs that're stuck on my iPod.
    It's incredibly frustrating and I'm at a loss here. I'm afraid now if I manually go through my list to re-sync all the songs except the duplicate items that it'll just re-duplicate them or something. I can't believe just clicking "yes" on a simple update could reak so much havoc on this little thing.
    Any help is greatly appreciated, the nearest Apple store to me is over an hour drive away and I really don't feel like wasting the gas if the solution is fairly simple.
    Please help & thank you!

    a question for the iPhone forum?
    LN

  • How to delete duplicate datasets in iOS health app?

    I synchronize my POLAR activity tracker with my iPhone to collect and visualize the number of steps in the Health app. In most cases it works perfect, but sometimes the data are completely to high. So I have days with more than 600.000 steps, but the list of data points shows thousends of duplicate entries.
    Is there an easy way to remove the duplicate data?

    Hi Tidbits,
    I ended up going to Best Buy, where I got my LG G3 Verizon phone. The Tech tried everything to correct the duplication, but could not find how to do it. He deleted everything, and went back to factory settings. Darn if the duplicates didn't come back.
    He went to my Verizon account, and went to the Verizon Cloud. Clicked on Contacts, and there were all the duplicate contacts. He deleted the duplications, leaving the original for each contact. BINGO the problem was solved.
    I am using the Standard Messaging instead of Verizon messaging Plus. The Tech said that if I had been using Using Verizon Messaging Plus this may not of happened. I just down want the added cost of Messaging Plus.
    Thanks for the response.

  • HOW TO DELETE DUPLICATE ELEMENT IN A VECTOR

    Hi everybody!
    If I've a vector like this vectA={apple,orange,grape,apple,apple,banana}
    and I want final result be vectB={apple,orange,grape,banana}.
    How should I compare each element in vectA and delete duplicate element. Like here duplicated element is apple. Only one apple remain in the vectB.
    Any help,
    Thanks.

    Hello all. Good question and good answers, but I would like to elaborate.
    To begin with, you specifically asked to map the following:
    {apple,orange,grape,apple,apple,banana} ==> {apple,orange,grape,banana}
    Both of cotton.m's solutions do NOT do this, unfortunately. They are both useful in particular cases though, so think about what you're trying to do:
    cotton.m's first solution is best if order does not matter. In fact, as flounder first stated, whenever order doesn't matter, your most efficient bet is to use a Set instead of a List (or Vector) anyways.
    Set vectB = new HashSet(vectA);This code maps to {banana, orange, grape, apple}, because HashSets are "randomly" ordered.
    cotton.m's second solution is good if you want to impose NEW ordering on the List.
    Set vectB = new TreeSet(vectA);This code maps to {apple, banana, grape, orange}, because TreeSet uses alphabetical-order on Strings by default.
    java_2006, your solution is the most correct, but it's a little verbose for my taste :)
    more importantly, the runtime-efficiency is pretty bad (n-squared). calling Vector.contains performs (at worst) n comparisons; you're going to call it n times! Set.contains usually performs 2 comparisons (constant, much better), so I suggest you USE a Set to do the filtering, while still sticking with your good idea to use a List. When the ordering is "arbitrary" (so can't use TreeSet) but still relevant (so can't use HashSet), you're basically talking about a List.
    I think saving A LOT of time is worth using A LITTLE extra space, so here, let's save ourself some runtime, and some carpal-tunnel.
    import java.util.*;
    class Foo {
         public static void main(String[] args) {
              String[] fruits = {"apple","orange","grape","apple","apple","banana"};
              List     l = Arrays.asList(fruits),
                   m = filterDups(l);
              System.out.println(m);
         // remember, both of the following methods use O(n) space, but only O(n) time
         static List filterDups(List l) {
              List retVal = new ArrayList();
              Set s = new HashSet();
              for (Object o : l)
                   if (s.add(o))
                        retVal.add(o);     // Set.add returns true iff the item was NOT already present
              return retVal;
         static void killDups(List l) {
              Set s = new HashSet();
              for (Iterator i = l.iterator(); i.hasNext(); )
                   if (! s.add(i.next()))     
                        i.remove();
         // honestly, please don't use Vectors ever again... thanks!
         // if you're going to be a jerk about it, and claim you NEED a Vector result
         // then here's your code, whiner
         public static void mainx(String[] args) {
              String[] fruits = {"apple","orange","grape","apple","apple","banana"};
              List l = Arrays.asList(fruits);
              Vector v = new Vector(l);
              killDups(v);
              System.out.println(v);
    }

  • How to Delete Duplicate Birthdays in iCloud?

    While the birthdays are shown properly on my iPhone, there are duplicate records in iCloud.  I guess this might be due to revisions to the contact information, or synchronization of two (or even more) sets of contact information with iCloud by mistake.  For the latter, I have already removed the duplicate set of contact information from both my iPhone and iCloud.  However, there are still duplicate birthday records in iCloud as shown in the attached picture.  When I attempted to delete the duplicate birthdays, a message saying that this is a read-only information and can't be edited would display.
    I should be grateful for other users' advice on how to resolve the problem.  Advice on how to distinguish which of the duplicate records is associated with the existing contact and hence should be retained, and which is/are associated with old records and can be deleted would also be highly appreciated.  Thank you very much.

    Hey fchengwy,
    Thanks for the question. I understand you are having issues with your Birthday calendar in iCloud, specifically duplicate events. The following article addresses Birthday calendar troubleshooting, and steps to resolve any duplicate entries:
    iCloud: Advanced Calendar and iCal troubleshooting
    http://support.apple.com/kb/TS4337
    To clean up issues related to manually adding birthdays to a calendar in Calendar (or iCal):
    1. If you already have the Birthdays Calendar enabled, deselect it in the Calendars list in Calendar (or iCal).
    2. Search Calendar (or iCal) by entering "birthday" (without the quotes) in the Search dialog in the top-right corner of the Calendar (or iCal) window.
    3. Sort the Search results by title, so they are easier to analyze.
    4. Locate any birthdays that are returned in the Search results that are not contained in a Holidays Calendar (such as John F. Kennedy's Birthday, Lincoln's Birthday, and so on).
    5. For each non-Holidays birthday returned, decide if you want to keep it. If so, open Contacts (or Address Book) and verify that you have a Contact for the individual. Enter the birthday information for that person in Contacts (or Address Book). For more information about updating Contacts (or Address Book) fields, see this article.
    6. After verifying that the birthday is entered in Contacts (or Address Book), remove any birthday events not stored in the Birthdays or Holidays calendars by selecting them and choosing Delete from the Edit menu.
              Note: You can select consecutive items by holding down the Shift key while selecting them. You can select non-consecutive items by holding down the Command key while selecting them.
    After cleaning up any manually added birthdays, you can enable or re-enable the Birthdays Calendar. To enable the Birthdays Calendar for the first time, open Calendar (or iCal) > Preferences and select the checkbox next to Show Birthday's Calendar. If you temporarily hid the Birthdays Calendar as per the instructions above, you can re-enable it by selecting the checkbox for it in the Calendar List.
    Thanks,
    Matt M.

  • How to delete duplicate contacts in icloud

    How do you delete duplicate contacts in iCloud so that they will not appear on all of my devices (iPhone, iPad, MacBook)?

    Hey mzhill78
    Remove you icloud contact information on all your IOS devices, go to the icloud setting on you ios device and turn off the addressbook syncing, when it asks you "do you want to remove keep the address on your ips device you say NO...  So now your MacBook is the only thing syncing too the icloud.
    Go to Addresbook and look for the menu option find duplicates.
    After that wait for your laptop to sync this too icloud.  to check give it about 2 min depending on how many changes log into your icloud account at www.icloud.com and check too see if the syncing has updated whats in the cloud.
    If it has then urn on your addressbook syncing in iclouud settings on your IOS devices and all should be back too normal.
    Hope it helps,
    If this has sloved your problem please mark it as Solved thank you..

  • How to Delete Duplicate Songs in iTunes 8

    Is there an easy way to delete duplicate songs in iTunes 8?
    A friend of mine with a large CD collection and I share music. The trouble is that in the process of exchanging music we have created quite a number of duplicates.
    Is there a way to automate identifying and removing duplicate songs?

    hi,
    you aren't missing this. Show duplicates is NOT a tool to allow to simply select all and hit deleted. It is showing you the duplicates, one beside the other, to allow you to discriminate two songs having the same name but that may not be duplicate. For exemple, they may be two different version of a same song and that you want to keep them. For this reason, automated process are somehow risky to loose also song that you want to keep.
    however, if you still want to proceed with an automated script, you can find some at http://dougscripts.com/itunes/.
    Personnally, I would still discriminate duplicated songs manually by reviewing the list of "show duplicate" to avoid deletion of song I wish to keep. I also have a quite large library and found many songs having the same name and not being duplicates.

  • How do we delete duplicates songs easily and not one at a time in iTunes?

    how do we delete duplicate songs easily and not one by one in iTunes?

    I've written a script called DeDuper which can help remove unwanted duplicates. See this  thread for background.
    tt2

  • Deleting duplicates from a table ,who's size is 386 GB

    Need to delete duplicate records from the table.Table contains 33 columns out of them only PK_NUM is the primary key columns. As PK_NUM contains unique records we need to consider either min/max value.
    Sample data :
    PK_NUM
    Name
    AGE
    1
    ABC
    20
    2
    PQR
    25
    3
    ABC
    20
    Expected data should contains only 2 records:
    PK_NUM
    Name
    AGE
    1
    ABC
    20
    2
    PQR
    25
    *1 can be replaced by 3 ,vice versa.
    Size of table : 386 GB
    Total records in the table : 1766799022
    Distinct records in the table : 69237983(Row distinct with out Primary key)
    Duplicate records in the table : 1697561039(Row duplicates without primary key)
    Column details :
    4 :  Date data type
    4 :  Number data type
    1 :  Char data type
    24:  Varchar2 data type
    DB details : Oracle Database 11g EE::11.2.0.2.0 ::64bit Production
    My plan here is to
    Pull distinct records and store it in a back up table.(ie by using insert into select)
    Truncate existing table and move records from back up to existing.
    As data size is huge ,
    Want to know what is the optimized sql for retrieving the distinct records
    Any estimate on how much it will take to complete (insert into select) and to truncate the existing table.
    Please do let me know ,if there is any other best way to achieve this.My ultimate goal is to remove the duplicates.

    As data size is huge ,
    Want to know what is the optimized sql for retrieving the distinct records
    Any estimate on how much it will take to complete (insert into select) and to truncate the existing table.
    @ 1. - Your best chance seems to be (should require a single FTS only)
    create backup_table as
    select pk,name,age,a_date,a_string,a_number, ...
      from (select pk,name,age,a_date,a_string,a_number, ...
                   row_number() over (partition by name,age order by a_date) rn
              from big_table
    where rn = 1
    @ 2. - Having statistics in place and (at least nearly) up to date explain plan should return an appropriate estimate
    Regards
    Etbin
    select pk,name,age,a_date,a_string,a_number
      from (select pk,name,age,a_date,a_string,a_number,
                   row_number() over (partition by name,age order by a_date) rn
              from big_table
    where rn = 1
    Operation
    Options
    Object
    Rows
    Time
    Cost
    Bytes
    Filter
    Predicates *
    Access
    Predicates
    SELECT STATEMENT 
    13,044
    1
    30
    53,023,860
    VIEW
    13,044
    1
    30
    53,023,860
    "RN" = 1
    WINDOW
    SORT PUSHED RANK
    13,044
    1
    30
    495,672
    ROW_NUMBER() OVER ( PARTITION BY "NAME","AGE" ORDER BY "A_DATE")< = 1
    TABLE ACCESS
    STORAGE FULL
    BIG_TABLE
    13,044
    1
    26
    495,672
    select pk,name,age,a_date,a_string,a_number
      from big_table
    where pk in (select min(pk) keep (dense_rank first order by a_date)
                    from big_table
                   group by name,age
    Operation
    Options
    Object
    Rows
    Time
    Cost
    Bytes
    Filter
    Predicates *
    Access
    Predicates
    SELECT STATEMENT 
    6,000
    1
    52
    306,000
    HASH JOIN
    6,000
    1
    52
    306,000
    "PK" = "$kkqu_col_1"
    VIEW
    VW_NSO_1
    6,000
    1
    27
    78,000
    HASH
    UNIQUE
    6,000
    1
    27
    126,000
    SORT
    GROUP BY
    6,000
    1
    27
    126,000
    TABLE ACCESS
    STORAGE FULL
    BIG_TABLE
    13,044
    1
    23
    273,924
    TABLE ACCESS
    STORAGE FULL
    BIG_TABLE
    13,044
    1
    24
    495,672
    Message was edited by: Etbin

  • Help needed in removing the duplicate nodes in an xml file

    Hi Friends,
    I need some help in removing the duplicates from a xml file using the Excel Spreadsheet. The xml Im using does not have any schema.
    Can some one please let me know the steps.
    Thanks a lot.

    Hi,
    I got the answer.
    Go to the developers Tab and click on export.
    Select the column where we want to delete the duplicates and click on Remove Duplicates from Data Tab.
    OR go to Home Tab> Conditional Formatting> High light Cell Rules> Duplicate Values. It will highlight all the duplicate values and then remove them manually.
    Thanks.

Maybe you are looking for

  • Photo stream reset

    is anyone else having problems resetting their photo stream

  • Help, I don't know how to burn a DVD!

    Hello, Not sure where to post this question but I need help with the DVD player part of my computer. It isn't iDVD I'm talking about either. Okay so I own this collection of Billy Blanks DVD's and so I want to burn one of them onto a blank disc. I in

  • Mail wanted to start setup - although have been using it for 2 years!

    Hi, appreciate your help as no so technical myself......but started my mac this morning and clicked to start mail and it wants to run through the set up again etc - like I just bought the computer. Have been using mail for 2 years no problem........a

  • MINOR CODE PROBLEM WITH AXIS,EJB,WSAD,WEBSPHERE

    Hi All, I am using below environment client side ANT + Sun 1.4.2 JRE JIBX (DE)SERIALIZERS, JIBX BINDING AXIS 1.2 RC2 STUBS server side JIBX (DE)SERIALIZERS, JIBX BINDING AXIS 1.2 RC2 JIBX BETA 3D WSAD 5.1.2 WEBSPHERE 5.0 Test Environment Basically I

  • /bin/ls format woes

    I have been googling until my eyes hurt but i cannot seem to find how to send long file names that contain spaces.... I am currently implementing an FTP server in java and have gotten to a point where i can send directory listings and files, however