Remove Deletion flag on storage location

Dear all,
Kindly find below image
i want to remove the deletion flag on storage location and plant.
Kindly let me know how to process it
Regards
Rajasekaran

Hi Raja,
Just un-tick at plant level and press enter. Storage Location tick will be cleared automatically. Then SAVE. And later if you want to maintain only for storage location, then enter material/plant/storage location in intial screen of MM06 and tick only storage location
Thanks & Regards,
Ramagiri

Similar Messages

Material deletion flag at storage location level is not working

I have a material that is created in some plants and also in some storage locations within each plant. If I mark the deletion flag at plant level I am not able to create a PO -> Me051 error message appears. Whereas if I mark the deletion flag at storage location level nothing appens. I am able to create a PO and also to create to goods receipt. Is there any customization that I should do in order to get the error message?
Thanks in advance.

storage location level deletion flag is not checked at order creation.
it is assumed that you can change the storage location when you do the receipt.
MRP run is at plant level, so the requirement is valid even the storage location view is flagged for deletion.

Deletion flag at functional location - equipment installation sallowed

Hi
Small question, when we set deletion flag at functional location we can still instal equipment in transaction IE02. Is it possible to configure LF in such way that after setting delation flag or inactivation FL equipment installation shouldn't be allowed??
We wanted to do it by user status but we can't.
Thanks for help. Regards. Joanna

Hi Joanna,
Try using user exit IEQM0001 and write a custom code, not to allow equipment being installed in deleted / inactive function location.
Regards,
Prabhu

Deletion or block storage location at material lable

Hi friends.
Can it possible delete or block storage location , once i have assign storage location to particulars material.
Anil Chaudhary

Hi,
If u want to delete the storage loc for a single material then do the same thro' mm06, enter the material # and storage loc, put a del ind tick & save it.
If u want to delete the storage location itself from plant then u can do the same as told above, thro OX09 by making the stock nil
regds,
CB

Re: removing deletion flag

Hi guru's.
The material is flag for deletion at client level, but unfortunately its stock is not removed,in one plant now this stock is to be removed from that plant & then marked for deletion, what to do.
its urgent
thanks
tuljasingh.

I am currently a student at RSU learning SAP and in trying to delete a material that had incorrect data I tried flagging the item for immediate deletion. Well I found out how to fix the standard price and when I went on to create the bill of materials is wouldn't let me because the material was flagged for deletion. After searching for this issue and solution I was able to remove the flag and finish the assignment. Thank you for having this trouble shooting information available to us.
Marcus

Remove deletion flag

Hi Gurus,
How to remove the deletion flag for the material master?
Regards,
Narendra

Hi,
Follow path Production- Master Data- Material Master- Flag for Deletion- Immediately MM06.
Give input for the material & execute.
Remove the deletion flag & save.
SmanS

Remove Deletion Flag from WBS Element

Hi,
Can anyone please tell me how cancel deletion flag from a WBS Element ? I set Deletion Flag on WBS Element by fault.
BR//
Rofique
Edited by: akash2010 on Feb 18, 2011 6:57 AM
Edited by: Virendra Pal on Feb 18, 2011 2:59 PM
Basic Question

The same way as you set it.
Select the WBS Edit>Status>DeletionFlag-->Undo

Enterprise Structure(Deletion of Storage Locations)

Hi Gurus
I am new to SAP MM module. I have created 5 storage locations in which i need to delete 3 locations.
What all precautions shouls i keep in mind before deleting the 3 storage locations. Kindly explain in details.
Regards
Bhupesh

If you have Stock in that 3 Storage Locations then First you Transfer the Stock (Should be nil) into another Storage Locations and Delete the Storage Locations in Trxn code OX09
If you have Extended / Created Material to that Storage Location then Set the Deletion Flag using MM06 at Stor Locn Level & save.
You can Perform the Stock Transfer using MB1B / MIGO 311 Movement type.
Regards,
Ashok

Material deletion at plant and storage location deletion at plant

hI EXPERT,
We are going to extend the materials in plant A to plant B and C. So we will extend it using LSMW. After extending, we need to delete the materials in plant A and storage location in plant A. How can we do that? Please explain step by step.
Thanks

Hi,
If you want to delete material at storage location level
Enter MM17
Select table MARD
Select fields tab
find MARD-LVORM
Execute (F8)
Enter list of materials
Enter plant
enter storage location.
tick the field lvorm(carry out mass change)

Remove PO deletion flag

hi...
i deleted some PO by Mass Transaction...by mistake some processing PO is also deleted...how i can remove the delete flag...???
Thanks & Regards
Rekha Sharma

hi all,
to remove deletion flag from your PO you can use both the transactions ME22N and and MEMASSPO.
choose the line items that you want to undelete and press the undelete button.
NOTE-PO at line items will be successfully deleted if only-No MIGO and MIRO has been done.
OR both MIGO and MIRO has been done.
If only MIGO has been done No MIRO at that moment You will not be able to undelete the PO.In this case you will obtain a error message shown below.
"Quantity delivered differs from qty ordered(Function not possible)".

Blocking a Storage LOcation

HI All,
How to block a storage Location from day to day transaction. What transaction is used for that?

Hi
You can flag all materials for deletion at this storage location level.
Set the message to error so that you will not be able to post any movements with this storage location for the alredy extended materials.
If you do not want any new material to be extended to this storage location then you can use MGA00001 user exit to do the check & issue error message.
Regards,
Manish

Detetion material from storage location

Hi All ,
I wanted to delete a material from a storage location .Can any one suggest me to delete material from storage location other than blocking material for storage location using MM06 .I suppose that it can not done by using MMSC.
Thanks & Regards,
Srikanth P.

Dear,
If you created an material by error and you want to delete that material from the data base you can do it in this simple 4 steps. The only condition is that this material has to have no material movement recorded.
These are the steps:1
1) Flag material for deletion. transaction MM06
2) Run report MMREO001 - Selection of materials flagged for deletion and select the material
3) Run report MMREO050 Archive Materials to archive the material (some customisig settings might be required)
4) Run report MMREO110 Deletion Program for Archiving Materials to delete the material from the database.
These reports are called by the SARA transaction too.
Regards,
Syed Hussain.

Create storage location at the time of goods receipt

Hi
How do i create the storage location automatically at the time of GR
thanks

In Plant parameter setting flag create storage location automatically

MD04 - Subreq - Storage location MRP area

Hi all,
I have an issue of Subreq in MD04 which is not assigned to the the good MRP area.
I'm explaining :
Business process
   -> I work with a subcontractor
        case 1 : either I buy raw material to be processed and delivered it directly to my subcontractor
        case 2 : either I send raw material from my physical stock to my subcontractor
   -> I create subcontracting purchase order with indication as components, the raw material.
   -> In case of the components are already in my subcontractor (case 1), the reservation (Subreq) should not consume my physical stock.
   -> In case of the components are in my physical stock (case 2), the reservation (Subreq) should consume the physical stock.
Solution choosen
Then I decided to create a storage location MRP area : "EXTERN" as External.
I assigned a storage location "EXT" to this MRP area.
I assigned this MRP area to the material in MRP1 / MRP Area.
In the purchase order, in the components popup,
For case 1 : I assigned "EXT" as Prod.Stor.Loc and Supply area
For case 2 : nothing special is filled
Issue
For the case 1, althought I assigned the storage location "EXT", the Subcontractor Requirement is not attached to the good MRP area.
WHY?
Remark : I didn't use the subcontracting MRP area because I would like to have 2 cases : case 1 & case 2.
Thank you in advance for your help about this problem which make me nervous !

Hello Catherine
Your system is working as designed. The following note explains the system design in more detail:
503497 - Subcontracting and MRP areas
Take a look on the relevant information provided by this note below:
Reason and Prerequisites
The most important point to understand the system behavior is the fact that the withdrawal of the (subcontracting) component is generally carried out during the goods receipt for an SC procurement proposalfrom the subcontractor stock that is managed at plant level from an inventory management point of view and that has no reference to a storage location at all.
This causes that subcontractor requirements can never enter a storage location MRP area, since you can later not post the withdrawal from this MRP area.
Thus SC-requirements always enter the SC segment of the plant MRP area or the SC-MRP area.
The SC MRP area in turn is supplied by stock transfer reservations from the plant MRP area or via third-party order processing through procurement proposals with goods receipt directly to the subcontractor. A supply through the materials planning from a storage location MRP area is not possible.
For the above reason, SC-requirements do also not carry any storage location, since the storage location does not have any control function at all for SC-requirements:
You cannot and you should not determine a storage location MRP area (see above), and the subcontractor MRP area is determined via the vendor of the procurement proposal, thus it is independent of the storage location.
See also Note 376050 on this topic that makes a modification available which prevents the deletion of the storage location in the subcontractor requirements, so that you can use, for example, customer-specific reports to analyze the storage location.
Please observe that the mentioned modification note 376050 only makes the storage location available on table RESB, so that you can use it on custom report. This modification will not make the storage location to be considered by MRP or on MD04.
BR
Caetano

External operation storage location

Hi,
I am generating a purchase requisiton for an external operation from a production order. This purchase req is a std purchase req and account assignment is F (production order). The line item does not have a storage location due to which the ME59N fails. Does anyone know how I can get the strorage location for this external operation purchase req to populate and how I can get the ME59N to work for purchase reqs of these kinds ?
Thanks

Hello
I'd like to suggest you to read carefully the following note:
503497 - Subcontracting and MRP areas
The following information provided on this note confirms that the storage location is not necessary for subcontracting, therefore, this field is empty:
The most important point to understand the system behavior is the fact that the withdrawal of the (subcontracting) component is generally carried out during the goods receipt for an SC procurement proposalfrom the subcontractor stock that is managed at plant level from an inventory management point of view and that has no reference to a storage location at all.
This causes that subcontractor requirements can never enter a storage location MRP area, since you can later not post the withdrawal from this MRP area.
Thus SC-requirements always enter the SC segment of the plant MRP area or the SC-MRP area.
The SC MRP area in turn is supplied by stock transfer reservations from the plant MRP area or via third-party order processing through procurement proposals with goods receipt directly to the subcontractor. A supply through the materials planning from a storage location MRP area is not possible.
For the above reason, SC-requirements do also not carry any storage location, since the storage location does not have any control function at all for SC-requirements:
You cannot and you should not determine a storage location MRP area (see above), and the subcontractor MRP area is determined via the vendor of the procurement proposal, thus it is independent of the storage location.
See also Note 376050 on this topic that makes a modification available which prevents the deletion of the storage location in the subcontractor requirements, so that you can use, for example, customer-specific reports to analyze the storage location.
You may consider the modification from note 376050, which prevents the deletion of the storage location from the subcontracting requirements, however, this is generally only relevant for displaying the storage location and this is not used for processing the item.
BR
Caetano

Remove Deletion flag on storage location

Similar Messages

Maybe you are looking for