Remove device does not work

Although I can remove it, when iSync starts again the device is still shown. In this case it is Pocket PC, which was a program to connect a Pocket PC to the Mac. I no longer need this.
I also tried to add a Nokia E90. I d/loaded the plug-in, did a search in bluetooth, and it found the E90 and installed it as a device. However when I try to connect iSync quits.
The fact I cannot remove the previous device leads me to think that the problem is with iSync.
Any ideas? TIA

Your issues don't involve a problem with iSync.
These instructions no longer appear to be available at Information Appliance Associates support site, but you can do this to remove PocketMac completely from iSync:
Manually remove PocketMac plugins from iSync in Mac OS X 10.4 or later by…
• navigating to the iSync application in your Applications folder
• right-clicking or control-clicking on iSync, then choosing Show Package Contents
• opening the Contents folder
• opening the Plugins folder
• locating the Plugin named PM, Entourage or PocketMac that you want to delete, being sure to leave the other conduit.syncdevice folders alone
• dragging the folder or folders you want to remove to the Trash, and emptying it
Why their uninstall option does not perform these steps is beyond me…
Start with that fix, and then you can address the Nokia 90 issue.

Similar Messages

HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

USB device does not work after sleep

The problem in the following:
X230t in tablet mode,
connect to the USB port of the adapter USB to COM Port (ftdi232) all works fine,
but if not disconnect the adapter from the USB port and put the laptop into sleep (or hibernation) the following inclusion is not determined USB adapter (or other device) and does not work pen (stylus)
until you restart the laptop.
What to do?
How to fix it?
Please help, this is terribly annoying.

Thank you friend, I do not work and a stylus. Since he is also on usb!
Lenovo and for some reason does not want to fix it.

Right click clip in sequence to remove attributes does not work?

Trying to get my old head around the three way color corrector. In the process when I try to right click a clip in the sequence to remove the attributes it does not work. When I do it again the filter square is still ticked. What am I doing wrong? Thanks for your help. The transition from Avid to FCP is not an easy one for me.

so someone else might be helped, you should link to the good captain's post or explain what you were doing wrong.

Remove Element does not work

Hi Experts,
I want to loop over a node and remove all elements in this node if they don't match a certain pattern (which needs to be checked by getting the details o these elements).
So looping over the node and checking whether the pattern matches works pretty fine (I've checked by using a counter variable which counts the number of matches and compares to the total size of the node). But removing the elements does not work.
I always get the complete table as the result but not without all those elements I that they'd be removed already. I also check the success status (boolean) of the remove function and it delivers always "true" so it seems to work.
This is the relevant coding:
       for(int c = 0 ; c < wdContext.nodeMatnrlist().size() ; c++){
          wdContext.nodeMatnrlist().moveTo(c);
          GetMaterialDetails(wdContext.currentMatnrlistElement().getMaterial());
          if(!wdContext.currentMaterialDetailsElement().modelObject()
.getOutput().getMaterial_General_Data().getCreated_By().equals("BAIV-SS09-21")){
               success = wdContext.nodeMatnrlist().removeElement(wdContext.nodeMatnrlist().getCurrentElement());
               counter++;
any Ideas on this?
Many thanks in advance!
Cheers
Tobias
Edited by: Tobias Fickinger on Sep 4, 2009 7:04 PM

Hi Tobias.
Try this instead:
wdContext.nodeMatnrlist().invalidate();
Regards.
Julio Herrera

Time Machine Configuration of USB Backup Device - Device does not work

Hi there,
my issue is that it appears that I'm not able to successfully partition / initialize / format or whatever my external USB device (Trekstor Datastation 300GB NAS) to work with Time Machine.
Time Machine wants to prepare the drive which I accept and then it doesn't do anything for a long time (appears process hangs). After some time it will state that it failed or I manually kill the process as it hangs.
After that I can not use the drive anymore at all since partition table seems broken. After using fdisk on Linux I can get the drive working again by creating a FAT32 partition.
I also tried to use fdisk on OS X and I could get it partitioned with "fdisk -a device" but even after that Time Machine does not accept the drive.
All options like delete, partition, repair etc. using Disk Utility.app result in broken drive.
I also tried with another (standard non NAS) USB device, same issues.
I also tried booting from Install DVD and used that Disk Utility.app. Same result.
I tried many different combinations now and I'm really lost. Although I'm quite new to Mac OS X I have quite some experience with Linux and Windows and it's not the first drive I have to initialize.
Anybody has any good idea? Are there tools that help analyze the issue?
It appears that the app can remove the FAT32 partition and then it stops. Lights from USB device turn off. No working sound anymore on drive. Process gets listed as "not responding". Even after 30 min nothing happens anymore.
Thanks for any comment that might help out here.

So I finally sorted it out. After a couple of further attempts using OS X and different tools I started looking for a software which could do it using Linux. I haven't found anything. So I looked further for something using Windows.
Although I don't like it I have to admit that MacDrive 7 on Windows XP did it. It ran just perfect, done in 2 minutes and drive usable for Time Machine without any further issues. It worked even with the Trial Version and I really consider to buy it for any potential future need. I think the only disadvantage is that I have read that MacDrive can only format the entire drive, which I wanted to do anyway. However, some might want to have a separate FAT or NTFS partition on it, I think in that case this might not work.
However, if anyone should have the same issue try MacDrive 7 on XP.

Win Media Encoder on VMWare - Video Devices does not work!!! MBP 15"

Hi,
Im trying to setup Windows Media Encoder (9 series) through Windows XP (SP3 Virtualized on VMWare 2.0.5) to make a live webcast event on internet, but my Macbook Pro can't recognize my camcorder (Sony HVRA1)
I want to setup an live webcast event but when I use an Intel Windows native computer (as I have been doing) all works gook.
I've get a new Macbook Pro 2.53GHz 15" (aluminium) and I just cant make it work on Windows Media Encoder. The camcorder just doest exist inside Windows.
First thing I've done was try to find a Win Media Encoder for Mac, but I havent found any. Only converters but they not work with live events.
I could try others encoders but Im already on a server which just run Windows.
Any tips how to make it work?
Thanks in advance.

Hi lgmmachado,
Presumably you connect the camcorder to the MBP using Firewire?
As far as I am aware one cannot access directly from a Virtual Machine a Firewire Port as it is not virtualised and no virtualisation software that I know of works directly with Firewire. I may be wrong here as I've never had the need to do so.
You would have to install BootCamp, then install Windows and then start up your Mac directly from the BootCamp/Windows partition to directly access the Firewire port from within Windows.
Kryten

IPhoto sync with iOS Devices does not work

I have an 2007 iMac with OS X 10.9.1, iTunes 11.1.3 and iPhoto 9.5.1.
I have an iPad 2 with iOS 7.0.4 and iPhone 4 with iOS 7.0.4.
Around the update to OS X 10.9 I have the problem that I can't sync my iPhoto pictures with my iOS devices anymore.
Beforehand I had no problem. But I can't tell exactly when this problem pop up the first time. (iOS 7, OSX 10.9, iTunes or iPhoto update???)
The problem is: I can sync all my content with my iOS devices per iTunes without any problemsbut not the fotos from the iPhoto library.
If I go to the Foto sync page in iTunes I see all my iPhoto Albums, Events, ... I can select and desect all these items. But if I sync this items I see that in the used memory bar no pictures are shown, the foto count do not show any number and on the iOS device all pictures are removed.
To fix this problem I have tried some options.
I have disabled the foto sync in iTunes, close iTunes, close iPhoto, remove the iPod cache from the iPhoto library, recreated the iPhoto database, obened iPhot and iTunes again, connectd the iOS device and try to sync some albums from the iPhoto libray again. But no pictuers are synced.
I have created a new iPhoto library and added some fotos to the new library, created some albums. Then I tried to sync the iOS device with this library. The first sync wored. :-). But then I disconnected the iOS device and later I connected it again and synced another time and all fotos are gone again.
The only way I can sync my fotos is to switch to folder sync instead of iPhoto library sync. This work, but this is a very bad option!
What can I do to fix this problem?

Open the iPhoto Libraray with the Finder as shown in this screenshot
and locate the folder titled iPod Photo Cache and move it to the Desktop.
Close iPhoto, lanuch and try again.
OT

My sound device does not work after yesterdays update

after the last update my sound device is out of system.

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

Pdf sync across devices does not work

is anyone experiencing problems with syncing PDF files across devices? My PDFs are not the same across the 3 devices I use.

So I managed to solve this Problem.
First: Be patient in itunes, as it takes some amount of time for changes to show up there. (after 10s it should be there - I also closed the applications quite often.)
Second make a backup of your calendars in the calendar app - you should have a file with a icbu-ending that contains your data. It's most likely you won't lose data.)
do a filesystemrepair on the basic level - reboot and hold cmd + s to boot into single user mode and type in fsck -fy and wait for your mac to finish the filesystem repairs (if there were any errors to be corrected.)
Reboot and do a parameter reset hold down cmd + option + p + r and wait for the second startup sound.
Turn on iCloud-sync for my calendar within OS X (Mountain Lion 10.8)
Turn on iCloud-sync on my iPad (iOS 5.1.1)
Turn iCloud-sync off on both devices and swipe both calendars. (On my iPad it went through right away - only birthdays from Contacts left. - On the Calendar-App in OS X I had leftovers.)
Checked my Calendar-app and deleted all leftovers and closed Calendar. - I repeted this step a few times until iTunes would only show me one last calendar named "Calendar")
I confirmed that i was close by creating a new test-calendar in the calendar-App named test which showed up in iTunes (Hurra!)
I restored my calendars with the import-function in the calendar-app.
I cleaned up duplicate Google-Webcals.
I synced the calendar with iTunes AND replaced the entries on my iPad.
I synced with my iPhone AND replaced the entries there as well.
I did a last sync with my idevices.
Poooh. Thanks half a day later I'm back to normal. Calendars showing up again on my mac and my iDevices.

Pls help! USB Storage Devices does not work for K7N2 Delta-L

hi all,
I am pulling my hair out trying to resolve this issue.
Everytime i plug in a USB Storage Device/Thumb Drive(eg Creative NOMAD), my system gives an error saying task cannot be performed due to a I/O device error.
Yet, the USB ports work well with other USB devices like mouse, keyboard, USB sound cards, printers and so forth??!!
I am using WinXP SP1 and have installed the patch that comes on the CD driver. Pls help me out if you know the answer. ...
Thanks!
Les

I'm pretty much going to confirm the same going with compatibility issues here...there is still alot of hardware out there on the market that is incompatible with many other types of hardware...
We've reached the day when alot of us like to think that ALL manufacturer devices should work flawlessly with everyone else's devices on the market. This just isn't the case and I don't ever see this being the case. Ideally it would be nice but the fact is is that no company can "cover all the bases" in this respect. There are literally hundreds of thousands of hardware mfg's out there now and this cannot be a reality unless the PC world goes Apple. Same standards for all period. No fluctuation or ability to expand on new ideas without going to the "Standard Setting Company" directly for full testing capability.
Regardless of that fact, I'm kinda surprised that you can't get this device to work on your rig. Have you tried a fresh install of XP? Have you tried using a PCI USB device to see if the MB ports are bad? Could be that the MB has a problem that doesn't show until you use that device...many things to try here to troubleshoot your problem.
Bonz 8)

Metadata Preset Edit - changing or removing keywords does not work

I can't find this documented so I sure hope this is not a duplicate. Sorry if it is.....
Existing metadata preset contains various fields populated and checked including keywords both populated and checked. When I edit the preset by either a)removing and unchecking the keywords or b)changing the keywords and leaving it checked followed by Done followed by Save to "Save changes to the preset Preset Name? ..... the changes or removal actions are ignored such that if I immediately Edit the preset, the keywords are back the way they originally were.
Changes to any other fields in the preset are reflected properly upon subsequent edit. Only keywords seem to be "not changeable or not removable".

You can use this to report a bug:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

I can not connect to my Time Capsule, rescaning for the device does not work.

I used extra Len Cable to connect to my MacBook but still it can not find the Time Capsule.
What are my other options to try reconect the Time Capsule again?

Hard reset did the trick.
I was able to finally see my Time Capsule after few minutes.

My bookmarks tab does not show an "organize bookmarks" choice. Also, going to the site, and clicking on the star and selecting "remove bookmark" does not work. What is the problem?

I can't think of any more details - what I wrote before sums it up. I used to be able to do this on Firefox and don't understand why I can't anymore.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Ipad app icons shaking but won't delete, home button does not work, power off switch does not work

I just got a new ipad air and have started to add apps to it. I have added a couple of free apps which I have also deleted (moved to icloud). I have also a couple of apps (free & purchased) which I have on it now.
Now my problem:
I tried to remove another free app. I press and hold the icon. All app icons shake and display the 'x' for removing, but the 'x' for does not work on any of the icons. Also, after this, the home button does not work as the icons keep shaking even while I am pressing the button. And the power off switch on the side of the device does not work either. If I close the smart cover and reopen it shows the home display and all the icons still shaking (instead of showing the passcode sign-in display). Fortunately (well, fortune in the misfortune) if I press the home button and off switch a couple times each and close the smart cover and wait, the device awakes normally. Well, normally until I try to remove any app.
So what do I need to do to fix this?
Thanx
Brian

Glad it worked. Anytime your iPad acts up, the reboot/reset is a common first thing to try. And it clears up many issues and glitches.
enjoy your new toy

Remove device does not work

Similar Messages

Maybe you are looking for