Remove echo from recorded person?

I am trying to remove echo from audio that I recorded of a person speaking in a conference room.  This is a professional project and I need it to be done right.  I have tryed some fiters/effects in Soundtrack Pro but haven't had any luck?
Any suggestions?

Echoes are nearly impossible to remove for the simple reason that they exist in exactly the same frequencies as the original voice.
You can try a noise gate (on the assumption that the echoes are at a lower volume). You'll need to go gently in this as often the effort to remove the echo makes the audio worse.
You may have to re-record the person to get the audio. Unless you have access to a good ADR setup you'll probably end up running B-Roll on screen and using the new recording as a VO.
Next time have someone on the set wearing good quality headphones who's job is monitoring and riding levels on the audio as it is being recorded. Then, you'll catch the issue before it becomes a problem.
Good luck.
x

Similar Messages

  • Removing echo from audio track.

    Hi
    I have audio recorded in a church which sounds great apart from the echo on it. Im at a loss as to which filter, if any will help remove it. Can anyone point me in the right direction?
    Many Thanks
    Adrian

    You may be able to reduce the level of echo by using a noise gate; the results will depend upon the nature and level of echo and also other background noise, but some reduction may be possible. Don't be too agreesive in the setting of noise reduction otherwise it will be very obvious that you are gating the sound and you will end up hearing the background sound coming and going as quite often heard on less well processed movies and tv productions.

  • Removing echo from voice over

    Hi - we recorded some voice over in a hotel room whilst on the road and it has a pretty bad echo on it. Sounds like we recorded in the bathroom. Does anyone have some suggestions to reducing this echo? any help much appreciated. thanks!
    michael

    The echo or reverberation of the room is usually quieter than the direct sound,
    so sometimes using an expander or noise gate will help.
    If the recording was done in stereo (like the camera's built-in mics, for example),
    you can get rid of some of the ambience by mixing left and right together as mono.
    Finally, when shooting, wear headphones.
    Do a test shot, play it back and listen.
    If the sound is too roomy, move the mic closer to the talent.
    Good luck!
    Les

  • HT2496 How do I remove words from my personal dictionary?

    I added a mispelled word to my Dictionary using the "Add to Dictionary" menu option. I need to remove it now and can't figure out how to.

    Stored in /Users/"username"/Library/Spelling/LocalDictionary
    Open it in TextEdit and delete the erroneous entry. Getting to the stupidly hidden Library folder is left as an exercise. I've permanently unhid it using this Terminal command:
    chflags nohidden ~/Library
    Might take a restart to take affect.

  • How do I remove everything from my personal web site.

    I am trying to clean out my basic web space to completely start from scratch. However, when I try to use the "Edit my web site" link, I can't seem to delete everything. I did manage to delete some of the photos but the web site is still published minus the photos. The text is still there. I am using ie 9 and I have the pop blocker turned off. Can someone help me with this?

    The fastest way to completely clear it is probably through FTP, but there should also be an option on the SiteBuilder to just delete the whole site.
    If you want to go the FTP route, just go to ftp://mysite.verizon.net and login when prompted with your Verizon username and password. This should bring you to a windows-explorer type view where you can just select files and delete them.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Is there a way to remove extensive echo from auido clip?

    This clip was recorded in an open hall in a veteran's memorial museum.  As you can hear the echo is extensive.  Is there a way to effectively remove the echo from the meeting hall echo?
    http://www.filexoom.com/showfile-32865/call4action_.wav
    Thanks
    James

    Basically no. There are a few plugins that may attempt to do this but they are not totally effective and cost the earth. Long thread here:
    Removing slight echo with audtion - recorded in room with hard walls

  • HT1206 I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account. Now I can't use the work email to create the new iTunes account.  how do I remove the email from my personal accou

    Since I upgraded to Mavericks from Snow Leopard I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account.
    Now I can't use the work email to create the new iTunes account.  how do I remove the email from my personal account?

    You can long into an account via this page and update the email addresses that you have on it : http://appleid.apple.com

  • Feeback error: "Your feedback seems to contain a URL. Please remove this and similar personal data from the text, then try again."

    error when using feedback: "Your feedback seems to contain a URL. Please remove this and similar personal data from the text, then try again. Thanks!"
    Using FF4.0 b10 with MS XP sp3

    well, for starters, is there a URL (link) in the text? if so, you will have to take it out, and include it in the little link area under the comments box.
    If not, check to see if you have 'Http://' or '.com' or something similar in the text.

  • How to remove noise from a recorded audio file.

    I'm a relatively new user. I recorded certain audio files which are noisy(humm or hiss). Can anyone suggest ways to remove noise from that clip? I tried Denoiser but it added further noise artifacts which were unpleasant to hear Need help. And pls dont ask me to rerecord it in a noise free environment!

    If you have some cash you go after 'Sonnox Restoreor' or 'iZotope RX'. Otherwise this might be of some help:
    http://www.howtogeek.com/howto/40469/the-how-to-geek-guide-to-audio-editing-basi c-noise-removal/
    Have a nice day!

  • Most efficient way to delete "removed" photos from hard disk?

    Hello everyone! Glad to have this great community to come to for help. I searched for this question but came up with no hits. If it's already been discussed, I apologize and would love to be directed to the link.
    My wife and I have been using LR for a long time. We're currently on version 4. Unfortunately, she's not as tech-savvy or meticulous as I am, and she has been unknowingly "Removing" photos from the LR catalogues when she really meant to delete them from the hard disk. That means we have hundreds of unwanted raw photo files floating around in our computer and no way to pick them out from the ones we want! As a very organized and space-conscious person, I can't stand the thought. So my question is, what is the most efficient way to permanently delete these unwanted photos from the hard disk
    I did fine one suggestion that said to synchronize the parent folder with their respective catalogues, select all the photos in "Previous Import," and delete those, since they will be all of the photos that were previously removed from the catalogue.
    This is a great suggestion, but it probably wouldn't work for all of my catalogues since my file structure is organized by date (the default setting for LR). So, two catalogues will share the same "parent folder" in the sense that they both have photos from May 2013, but if I synchronize May 2013 with one, then it will get all the duds PLUS the photos that belong in the other catalogue.
    Does anyone have any suggestions? I know there's probably not an easy fix, and I'm willing to put in some time. I just want to know if there is a solution and make sure I'm working as efficiently as possible.
    Thank you!
    Kenneth

    I have to agree with the comment about multiple catalogs referring to images that are mixed in together... and the added difficulty that may have brought here.
    My suggestions (assuming you are prepared to combine the current catalogs into one)
    in each catalog, put a distinctive keyword onto all the images so that you can later discriminate these images as to which particular catalog they were formerly in (just in case this is useful information later)
    as John suggests, use File / "Import from Catalog" to bring all LR images together into one catalog.
    then in order to separate out the image files that ARE imported to LR, from those which either never were / have been removed, I would duplicate just the imported ones, to an entirely separate and dedicated disk location. This may require the temporary use of an external drive, with enough space for everything.
    to do this, highlight all the images in the whole catalog, then use File / "Export as Catalog" selecting the option "include negatives". Provide a filename and location for the catalog inside your chosen new saving location. All the image files that are imported to the catalog will be selectively copied into this same location alongside the new catalog. The same relative arrangement of subfolders will be created there, for them all to live inside, as is seen currently. But image files that do not feature in LR currently, will be left behind by this operation.
    your new catalog is now functional, referring to the copied image files. Making sure you have a full backup first, you can start deleting image files from the original location, that you believe to be unwanted. You can do this safe in the knowledge that anything LR is actively relying on, has already been duplicated elsewhere. So you can be quite aggressive at this, only watching out for image files that are required for other purposes (than as master data for Lightroom) - e.g., the exported JPG files you may have made.
    IMO it is a good idea to practice a full separation of image files used in your LR image library, from all other image files. This separation means you know where it is safe to manage images freely using the OS, vs where (what I think of as the LR-managed storage area) you need to bear LR's requirements constantly in mind. Better for discrete backup, too.
    In due course, as required, the copied image files plus catalog can be moved bodily to another drive (for example, if they have been temporarily put on an external drive, and you want to store them on your main internal one again). This then just requires a single re-browsing of their parent folder's location, in order to correct LR's records inside this catalog, as to the image files' changed addresses.
    If you don't want to combine the catalogs into one, a similar set of operations as above, can be carried out for each separate catalog you have now. This will create a separate folder structure in each case, containing just those duplicated image files. Once this has been done for all catalogs, you can start to clean up the present image files location. IMO this is very much the laborious and inflexible option, so far as future management of the total body of images is concerned... though there may still be some overriding reason for working that way.
    RP

  • I Have removed conduit from safari but it still has pop ups

    So i have remove the application conduit and geniome from finder, but pop up still occur. I even changed and remove conduit from search and extension. I still get pop ups.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • What steps do I take to give my husband my older IPAD w/o removing him from my Apple account?

    I recently bought a new IPAD2.  All personal data and APPS were transferred from my older IPAD to my new one at the time of purchase. I'd like to give my older IPAD to my husband w/o removing him from my Apple acct.  Apple's support does not provide instructions for my situation.  Does anyone have suggestions as to what steps I should take?

    What you might need to do depends upon how you want the old iPad to be for him.
    If he will be using your iTunes account for any purchases/downloads from the store then he can continue to be logged in with your account in Settings > iTunes & App Stores. If not then log out of your account by tapping on your id in there, and he can then log in with his own account - any apps and other store downloads that you leave on the iPad will remain tied to your account, so only your account will potentially be able to redownload them and/or download updates to your apps.
    To use his own account for Messages he can log out of your account via Settings > Messages > Send & Receive - tap on your id at the top of that screen and select 'sign out' on the popup. He can then log in with his account. Similarly for FaceTime : Settings > FaceTime (tap on your id on that screen). And (if he wants to back up his content to his own account) : Settings > iCloud > Sign Out
    If you want to remove all content from the old iPad so that he can start afresh with it, then Settings > iCloud > Sign Out, and then Settings > General > Reset > Erase All Content & Settings

  • How can I remove Genius from my ipod playlists menu?

    After my 120GB Classic iPod died, I purchased a new 160GB Classic last week. Now I can't seem to get rid of the Genius playlist which appears at the top of my normal playlists on my new iPod. I don't use Genius and have it disabled in iTunes (via iTunes > Prefs > General > uncheck Genius AND Store > Turn off Genius). I don't understand why it appears in my new iPod. It never did on my old one. It is a bit of an annoyance because I used to click right through to my first playlist to play the music I like, and now I have to scroll 1 down, which is not always easy for me because I have a small handicap.
    old situation:
    click music > click playlists > click play = first playlist starts playing
    new situation
    click music > click playlists > Scroll 1 down (which is a hassle) > click play = first playlist starts playing
    I hope there is a way to remove Genius from my playlists in my iPod but I can't see how. If it is not possible it seems to me that this is an issue that needs to be fixed. Maybe a software update can give a solution.
    Apple, please consider this.
    Thanks,
    Martin

    turingtest2 wrote:
    Genius Mixes are generated from random selections of your library.
    The Genius Playlist lets you select a specific song to be used as the basis for selecting "similar" songs that are supposed to play well together.
    If you don't want to use the feature, don't use it. Anything as complicated as an iPod is bound to have at least one feature you don't need or doesn't work the way you would want it to. Personally I'd fix grouping on Album Artist or the behavior of iTunes U before worrying about an item I don't need in the menus.
    tt2
    I know darn well what Genius Mixes are, and I've chosen to turn them off because I don't like the concept or in this specific case the execution.  There are plenty of other features in the iPod I don't use, but none of them get in the way.
    Personally, this is my 9th or 10th iPod purchase, going all the way back to a gen2 (before the iTunes store when I had to rip my 1,000 CDs to have any music in iTunes) that saw three battery replacements (yes, I've been inside the case).  Five of the iPods before this one are still working.   I know how to use iTunes and the iPods.
    The issue here is simply that the setting to turn off Genius Mixes does not turn off Genius.   It still appears in the Playlist queue -- and most annoyingly in the first Playlist slot.  Genius is turned off on all my iTunes instances, and all my iPods.
    When you turn off a feature, the feature should be turned off.   If that isn't the result, that is a bug.  Quite simple.

  • How do you remove recipients from the To list?

    Say you want to send an email to multiple recipients. You add a few recipients to the To list but then change your mind about including one of them. How do you remove one from the list? So far the only way I can see is go cancel the whole message and start again.

    Touch the persons name you wish to remove. It will highlight in blue. Then hit the destructive backspace (delete) key on the keyboard.

  • HT4009 My daughter made a $49.99 in-app purchase of 1400 gems for Home Design Story.  She says she does not know how she purchased it.  Is there anyway to remove that from my purchases?

    My daughter made a $49.99 in-app purchase of 1400 gems for Home Design Story.  She says she does not know how she purchased it.  Is there anyway to remove that from my purchases?

    Apple allows apps to list themselves as "Free" if the initial download is free, even if the app has kid-oriented inducements for costly in-app purchases.  The in-app purchases are almost always ridiculous, over-priced game accessories, of which your example of "1400 gems for $49.99" is right up there.  It is way too caveat emptor for my taste, but each consumer can form their own opinion on that.
    To Apple's credit, they have a good record of granting refunds providing you explain the extenuating circumstances (purchase by a minor) and only ask once.  Contact iTunes Customer Service.
    As roaminggnome notes, you need to place restrictions on the devices.  The restrictions are off by default, so you need to take action to do this.  See this document:  iOS: Understanding Restrictions

Maybe you are looking for