Remove EDM Profile from Interval Meter of an installation-Device Management

My dear friends, I need sincere help from you .
I have an installation with an interval device installed to it.
We need to do full removal of this installed device by eg32.
The interval meter is having EDM Profile attached to it. Before doing full removal of the device from the installation using EG32,
we need to de-allocate the EDM Profile attached to this interval meter. Manually this is done by using transaction code - EEDM04
but we need to do deallocation of profile using ABAP code.
We need your help in this regard. Could you suggest ISU function modules that could be used to do the deallocation of the EDM profile from the interval Device/Meter.
Your help is really needed and appreciated!
Thanks,

I think function module ISU_S_PROFASS_CHANGE might be useful.
Isnt't it an option to prorate the profile allocation on device removal?
You can set system parameter PRORATEPRO for this in customizing of device management:
PRORATEPRO (Limit Prof. Alloc. for Rem./Repl./Mod./Chnge to Logical
Reg.)
During device installation/replacement/removal or when changing the
logical register number, you can use this parameter to control
whether the allocations of the profile to the register are limited.
Edited by: evolderen on Apr 15, 2010 8:23 AM

Similar Messages

Remove color profile from an image

How to remove color profile from an image is it possible through any script?
Manual Try - Don't Color Manage this Document: option is used to instruct Photoshop to remove an existing embedded profile but when I save the file, close and open it I still see a color profile in the embedded image.

On the mac you could have sips do this (it may depend on the file type). You would loose the files creator if Photoshop was its last editor though.

HT5833 What happens if you remove a profile from ipad? Can you get it back?

What happens if you remove a profile from iPad? Can you get it back?

Hi Gumby694,
You can only get the profile back if you plug into a computer that has the configuration profile in Apple Configurator or get the profile wirelessly from an MDM.
Hope this answers your question.
~Joe

How do I remove extra profiles from color mangement in Print Module?

How do I remove extra profiles from color mangement in Print Module?

If you're talking about the "short list" then click on other and then uncheck the ones that you don't want displayed. If you're talking about the long list, then you will have to browse to the folder containing the profiles and then delete them manually.

How do I remove cmyk profiles from a pdf. and keep it strictly 2 color process?

My company is trying to outsource a booklet to an offset printing company. We are strictly digital printing, and I honestly have no experience with offset. In the past I would build the documents with the pantone colors that were needed in whatever software I was using to create it (Illustrator, Indesign), do my checks and fixes in Acrobat and send it to the printer, and it would get done. The current printer is having an issue with the files that I'm giving him. He says, that the files contain CMYK profiles, and has to strictly be 2 color process. The file is pointing to the correct spot colors, but it does still does contain the CMYK profiles, list I have no idea how to remove the CMYK profiles, I can convert them to RGB, but that doesnt help. How do I remove these profiles and make the PDF strictly use spot colors, or does this not make any sense, Honestly it doesn't to me.

Honestly it does not to me either.
You have a history of creating spot color files - but are using a new vendor...what I'm hearing from the vendor doesn't make sense
...do my checks and fixes in Acrobat and send it to the printer, ...
Have you checked the PDF - verified that your Spot colors are Spots, not cmyk builds?
The current printer is having an issue with the files that I'm giving him. He says, that the files contain CMYK profiles, and has to strictly be 2 color process.
Communicate very clearly - cmyk profiles or cmyk elements?
To my limited knowledge, every file will have a profile - it's a moot element in spot color printing -

How do you remove provisioning profiles from iOS 6?

I am looking for them under the usual path "settings/general/profiles" but that option seems to be gone now. How do I erase provisioning profiles from my iphone 4 now?

Yeah Apple !
As your provisioning program is plain ******** before setup correctly…
How to you restart from scratch ?! Com-mon !
<Edited By Host>

Automate the removal of profile from a user id

hi,
I have allocated SAP_ALL profile to a user id.
Can u pls tell me is there any way to automate the removal of SAP_ALL profile after a particular day

Hi Balaji,
As far as i know theres no tools on SAP to remove the profiles after certain date... when working with roles you can set a "valid to" field to make the role expire but with profiles this is not available.
What you can do is create a role as copy of the SAP_ALL profile and then set a validity so it expires when needed.
Regards
Juan

X1 USB mouse resumes from standby even though disabled in Device Manager

I don't want mouse movement to resume the X1 from standby (sleep). So I have gone into Win 8.1 Device Manager under power mgt tab and unchecked the box that enables this. However, the X1 still resumes from standby if the mouse is moved.
Is there something else -- like in the BIOS -- that I need to do?

I have also found that keyboard does not seem to be able to wake this computer in any case, even though the box is checked in Device Mgr for keyboard to do so. However, if I uncheck the box for keyboard, then mouse does not wake computer either. It is as though the checkbox in Device manager for the mouse is not relevant. Only the checkbox for keyboard matters as regards the mouse, and the keyboard can't wake the computer regardless.

Update Consumption Value in EDM Profile From Meter Readings in DM

Dear,
Can it be possible that consumptions values from meter readings (for non interval readings / Non AMR meters) in DM imported / transfered to profiles in EDM.
Sohail Ashraf

In general non-interval measured point of deliveries are dealt with by a synthetic profile.
The synthetic profile is assigned to the installation and can be normed, e.g. to 1000 kWh.
In most cases you will have several synthetic profiles, where each one is used for customers that have such a profile.
Then in billing the usage factor is updated in such a way that the usage factor * normed consumption = actual consumption of customer. So if the customer consumed 2600 kWh the usage factor would be 2,6 for that period if his synthetic profile is normed to a 1000kWh.

How do I remove a profile from my iPad?

I bought my iPad from my school when I graduated. Being a school iPad, it has restrictions that I can't remove and it seems to be because of the profiles that are on it. I really just want iMessage back, which I can't do unless the profiles are gone. Like I said, it's no longer the schools iPad, so this isn't breaking any rules or anything.

If you cannot restore because the iPad is asking for a passcode, foloww the instructions here:
http://support.apple.com/kb/HT1808

Removing old profile from the laptop?

When I first bought my imac I was uncreative and did liv### as my mac name. I then changed it to rocketliv when I signed up for the mac internet features. Is there a way to get rid of the liv### from showing up in my preferences?! I keep changing it to rocketliv but it keeps coming back to haunt me.

Are you referring to the Computer Name, your user short name, your user long name? Try to be specific since there are a lot of different "names."

De-allocating EDM Profile of an Interval Meter attached to an installation

My dear friends, I need sincere help from you .
This is an ISU requirement on which ABAP/functional suggestions are required.
I have an installation with an interval device installed to it.
We need to do full removal of this installed device by eg32.
The interval meter is having EDM Profile attached to it. Before doing full removal of the device from the installation using EG32,
we need to de-allocate the EDM Profile attached to this interval meter. Manually this is done by using transaction code - EEDM04
but we need to do deallocation of profile using ABAP code.
We need your help in this regard. Could you suggest ISU function modules that could be used to do the deallocation of the EDM profile from the interval Device/Meter.
Your help is really needed and appreciated!
Thanks,
Rohit

I think function module ISU_S_PROFASS_CHANGE might be useful.
Isnt't it an option to prorate the profile allocation on device removal?
You can set system parameter PRORATEPRO for this in customizing of device management:
PRORATEPRO (Limit Prof. Alloc. for Rem./Repl./Mod./Chnge to Logical
Reg.)
During device installation/replacement/removal or when changing the
logical register number, you can use this parameter to control
whether the allocations of the profile to the register are limited.
Edited by: evolderen on Apr 15, 2010 8:23 AM

Create IOS app to remove MDM profile

Hi,
I need a way to automatically remove specific profiles from ipads and then reinstall from a URL. Is this something that could be achieved with Xcode?
I am an experienced c# programmer and thinking off learning objective C. This may well be my first project. I work as an IT manager and we have just started rolling out iPads, etc using MDM.
Any advice is much appreciated.
Ps I know that I can do this with the MDM. This is to deal with unusal circumstances that sometimes occur in IT!, and the end user doesnt want to uninstall settings themselves.

Hi, Andrew-
What specifically are you looking for? It's unclear if you're looking for best practices or other documentation. Thanks,
-Elaine

Stop Profile From Sync'ing to iPod Touch

Hi All,
I have a question regarding permanently removing profiles from the iPod touch. I currently have an iPhone (which has a work related profile), but I use the same computer to sync my iPod touch. For some reason the work profile syncs onto the iPod touch even though the work application is not sync'd to the iPod. In addition, I manually have removed the profile from the Mobile Applications sub directory.
I also deleted the profile from from the iPod, but every time the iPod is sync'd the profile shows back how. How do I delete this permanently?
Thanks.

It was actually loaded by an application from work. I think the profile is called a "Provisioning Profile" (not Configuration Profile). It is definitely loaded as part of the application, but I have removed the application and deleted the backup and sync histories...
No use, it still shows up after a sync. There is got to be something hidden...
Thanks.

EDM interval meter with CT/PT ratio

Hi,
I have an interval meter register, which i have mapped in EDM as a profile. But the consumption getting recorded in the profile is not getting adjusted based on the CT/PT attached to that device.
How can the CT/PT ratio along with the meter ratio can be included to the consumption recorded in profile.
Thanks in advance

Hi,
Meters have Billable meter multipliers derived from meter and CT/PT ratios. For scaling purposes, CT/PT ratios are stored at Device level for Non Interval Meters.
For Interval Meters, consider to apply CT/PT multipliers before importing the interval data into SAP..In this case, the rate data for Interval Meters correposponding to RTP rate will ignore the CT/PT factor during the billing run.
Hope this helps..
Thanks
Vinod

Remove EDM Profile from Interval Meter of an installation-Device Management

Similar Messages

Maybe you are looking for