Remove Everything & ReInstall Windows 8 From Windows 10, possible?

Ok, so I bought an HP Pavilion Laptop that came preinstalled with Windows 8. 
I made the mistake of installing the latest Windows 10 technical preview (its slower and a lot more glitchy than the first build). 
I want to know if it is possible to use HP's Recovery Tool to try to reinstall windows 8. I don't have a windows 8 CD, does the recovery tool install windows 8 without the CD? HELP!!!

You should refer to the HP support website for the recovery process. If you still have the recovery partition, then you should be able to run it during startup of your PC (before starting Windows) and then run it and it will format everything and reinstall your
Windows and setup settings like when you bought your Laptop.
 

Similar Messages

  • Factory cond. restore or reinstall windows not possible

    My laptop was running badly so I decided to restore to factory settings. At the finish of the 3 discs being read when restarting I got a fatal error message in VXD.  I then tried to reinstall windows but get a message that a hard drive cannot be found. I now don't know what to do, any suggestions please?

    Hi, I had this problem and some others here did also.  The fix for me was running the battery all the way down so that the CMOS reset itself.  One of the threads detailing that fix is here.  Once you get the tablet back up, you can update the EFI to the latest firmware and that should hopefully prevent it from happening again.

  • 5th generation ipod not detected by my windows xp.  works fine on other pc.  performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

    5th generation ipod not detected by my windows xp.  works fine on other pc.  performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

    I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
    Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
    Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
    Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
    - reset
    - fully charged,
    - cable works fine on two other computers
    - in normal or disk mode makes no difference
    - tried to find anything useful in the diagnostics mode
    - reinstalled iTunes several different times since then to the latest version
    - I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
    - I've never used any Mac with this ipod
    - I've tried fiddling with the win7 Services by stopping and restarting them and of course
    - uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
    - Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
    Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
    iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
    Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
    I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
    I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
    Here are two screengrabs from my Device Manager
    and Devices and Printers screens on my comp:
    That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
    If you think you have any idea PLEASR HELP, I'M DESPERATE!

  • Reinstalled Windows - how to restore iTunes from backup?

    OK, here's the short succinct and none-waffley version of my question:
    Under OSX there's a whopping big (xml?) file stored in the iTunes Library folder, but where is that on Windows? I've read about a Library.itl file, is that the same thing? If so, where on earth is it please?!?
    And now for those who don't mind reading a bit, I'd like to explain my problem (a blank looking iTunes library after reinstalling Windows / iTunes) in a bit more detail. A lot of hard work and many listening hours went into crafting those smart playlists and I'd rather like to get them back if that's at all possible?
    Here's what I've got to go on:
    - the "iTunes music folder" is on a disk partition that remained untouched during the reinstallion process, so all my music's still there (else I wouldn't be quite so relaxed about it!!!)
    - my "My Documents" folder is also on another untouched partion, but I don't think iTunes saves anything there does it?
    - before reinstalling Windows I backued up my "Documents and Settings" folder from C drive. I assumed everything I'd need for restoring iTunes would be stored in the "Application Data" subfolder (or whatever Windows calls this in english - it's Anwendungsdaten in german)
    So after reinstalling iTunes and before starting it for the first time, I copied my backup of "Docs & Settings/Rich in Berlin/Anwendungsdaten/Apple Computer/iTunes" to the corresponding place on C drive (and also the same named folder from "Local Settings"). Then I started iTunes, remembered that this is a PC not a Mac and saw an empty library window. Which brought me here.
    As I wrote at the beginning, I suspect Library.itl has something to do with it. Can anybody confirm this and/or tell me where to find it, please?
    Cheers
    a computer designed by the devil Windows XP Pro iTunes 4.8 and why do so many only use this to show-off irrelevant items they own???
    BeigeG3 400/256/40 OS921, PismoG3 400/640/40 Windows XP iTunes 4.8 and why do so many only use this to show-off irrelevant items they own???

    iTunes operates as a database of information for your music files. The actual music files are stored on your PC, not within iTunes. iTunes keeps absolute references of the music file location and other information in its database file. This allows iTunes to use music files from any location on the PC: different directories/folders on the main HD, another internal drive, an external drive, or a network drive (or any combination of the above). Each song reference has a specific and hardcoded path so iTunes can find and play (or sync) it. Move the file, change the path, re-map the drive it is on, and iTunes will lose the file (giving you the '!' of a ‘Broken Link’). Lose, move or corrupt the ‘iTunes Music.itl’ file and your complete Library will ‘vanish’.
    If you delete, corrupt, or otherwise lose your ‘iTunes Library.itl’ file, you will end up with a ‘blank’ Library within iTunes. Nine time out of ten, your underlying music files are still on the PC. They can be ‘re-Added’ via the File==>Add Folder/File menu command, but you will lose some of the music meta-data. Recovering your Library via backup copies of the iTunes database file, or from importing the XML file is always preferable.
    The iTunes music information (meta-data) is stored in two places: the actual individual song files themselves, and the iTunes Library database file (‘iTunes Library.itl’). There is a corresponding XML file that is created by iTunes, but not directly used. See: What are the iTunes Library files?.
    Song attributes stored directly in each music file are as follows: Artist, Album, Song Title, Year, Comments, Compilation tag, Lyrics, Genre , Grouping, Composer, BPM, Album Artwork, Bit Rate & Kind (Both not tags - inherent to the file itself).
    Song attributes stored in the iTunes Library database file only are: Playlists, Ratings, Play Count, Last Played, Date Added, Date Modified, Equalizer, Volume Adjustment.
    While it appears that all of the music attributes (except for Album Art) are also written to the XML file, when ‘Importing’ the XML file back into iTunes, it will not capture the Ratings, Play Count, Last Played, and Date Added attributes. The XML file can be somewhat useful, but it is usually better to have legacy copies of the ITL file for restoring your complete Library.

  • I reinstalled windows on my computer, wiped out everything is there any way to retrieve my library or at least my purchases, I reinstalled windows on my computer, wiped out everything is there any way to retrieve my library or at least my purchases

    I reinstalled windows  and wiped out everything. Is there any way to retrieve my library or at least my purchases??

    It has always been very basic to always maintain a backup copy of your computer.
    Certainly you did not reinstall you os without making sure your backup copy was up to date.
    Just use your backup copy to put everything back.
    If for some reason you failed to backup ( not good), then you can transfer itunes purchases from an ipod:  File>transfer Purchases.
    If you are in the U.S, then you can use the newly released Beta version of icloud to retrieve them.  open itunes store, click Purchased under Quick Links.
    ALWAYS maintaining a backup is very important.

  • Can not copy any songs or videos from iTunes to iPhone after reinstall Windows 7

    I am experiencing trouble with my iPhone. I have to reinstalled my Windows 7 OS due to some trouble. When I reinstalled everything include iTunes back, it can not automatically back up my iPhone to iTunes like it used to. Also, I can not copy any songs and/or videos from iTunes to my iPhone. Fortunately, the application can be restored thanks to the new iTunes version.
    Does anyone know how could I restore all my previous services I got before the reinstallation? Help!!
    Many thanks..

    Did you create a backup of your music and videos before you reinstalled windows?

  • Remove everything and install windows again

    I have MSI AE 2212G with win8.
    If i use this option (Remove everything and install windows again),would i have the drivers installed and MSI programs coming  with PC after installation?
    Thanks

    Use what option? Are you talking about the integrated and automated recovery or installing Windows yourself from another install media not coming with the PC?

  • I downloaded newest itunes version and it would not install properly and now i can't open it. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. anybody having this problem.

    i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • My ipod touch 4g does not show in Windows 7 or itunes.  I've removed and reinstalled itunes, stopped and started apple mobile services and changed out cables.  Ipod is charging when connected.  I've also done a complete rollback to factory defaults.

    My ipod touch 4g does not show in Windows 7 or itunes, I've removed and reinstalled Itunes.  I've done a factory default, and I've changed out cables. The ipod shows connected but does not show.

    Did you remove and reinstall all the Apple software by:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Run this to see if it helps determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if you have an iPod or computer problem'
    Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • My computer running Windows 8.1 no longer recognizes my 7th Generation Ipod Nano.  I have removed and reinstalled the latest ITunes software and it still doesn't recognize my Ipod.

    I previously installed my Ipod Nano 7th generation in Itunes, Windows 8.1.  When I have recently connected, Itunes does not recognize it.  I removed and reinstalled the latest Itunes software, but no success.  Message says that Itunes sees an Ipod is connected, but does not recognize it.  The USB connection is working fine, as I recharged the Ipod without problem.

    Hello Lynn,
    The article linked below details a number of troubleshooting steps that can help get iTunes to properly recognize your iPhone.
    iPod nano: Error message saying that iPod could not be identified properly
    https://support.apple.com/en-us/HT203350
    Regards,
    Allen

  • Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

    Hello Everyone,
    I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
    Please send me a feasible solution to this problem.
    Thank You.

    Uninstalling the iCloud control panel should allow you to do that folder deletion.

  • I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book

    I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book back as i have already paid for it once and i would not like to pay for it twice.

    If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • How do i import my library from an external hard drive. Exported it as had to wipe pc and reinstal windows but when i try to import nothing happens

    How do i import my library from an external hard drive. Had to export it as had to reinstal windows due to a conflict between windows and i-tunes. Wen i try to import nothing happens despite selecting the file. Can you import from an i-phone to i-tunes?

    What do you mean bye exported the library? 
    There is nothing to export or import.
    The correct process to backup the iTunes library would be to copy the ENTIRE iTunes folder from the computer to the external drive.

  • Is there a way to reinstall windows 7 from an erased disk? HP support states there is

    Hello,
    I completley erased the hardrive on a Compaq Presario CQ57 that I plan to sell.  I don't have the recovery discs to reinstall Windows 7 Professional 32 bit. 
    I phoned HP and they they told me that although the hard drive is wiped clean, there is a partition that still houses the operating system and does not require disks.  However, they stated they would have to charge an out-of-warranty fee of  $59.99 for the information on how to do this.  Declining such, they stated someone on the forum should be able to help.
    I have searched the forum but have not found a way to restore Windows 7 on the notebook without recovery disks so far.  Was HP support mistaken about bein able to restore Windows without disks?
    Thank you.

    When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
    If you only erased the Windows partiton and left the factory recovery partition intact, then yes you can possible recovery the computer with out the discs. If you ereased the entire disc, there is no way to recover the computer to a factory like state without the HP Recovery Disc set.
    Please enter you computer information HERE and select "Drivers", then the original OS to see if an HP Recovery Disc set is available from HP. You can also see if third party vendor www.computersurgeons.com has an HP Recovery Disc set available for your computer.
    Alternatively, if you can still can still read the 25-digit product key on the Microsoft COA affixed to your computer, please see "How to Install Windows 7 Without the Disc" to download Windows 7, create the Windows installation media, and install Windows.  If you prefer to install Windows 7 from a USB Flash Drive, please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash Drive. Please note that you will have to source the needed drivers from HP or directly from the chipset manufacturer's websites. This method will result in a plain Windows installation with no HP customization.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • I can't reinstall Windows Xp pro SP3 from installation disk on my IBM Thinkpad T40

    Dear folk,
    I have bought used IBM Thinkpad t40 in Germany.
    It has Windows XP in German, wich works well but it makes some dificulties while I am using some functions.
    I decided to reinstall Windows XP Pro in English.
    My Windows XP Pro CD instructed me to install XP from BIOS.
    This is how it works.
    I got to BIOS by clicking blue button "IBM acsess".
    I have got to BIOS released in 15/05/2003.
    My Win XP Pro CD instructed me to press Delete to boot Cd-Rom and run Win XP installator.
    Meanwhile, pressing "Delete" button did not produce any effect.
    I got to Start up menu in BIOS, then I tried to run CD-Rom to run Windows XP from my installation CD.
    But it has not produce any effect.
    System stayed still.
    As result, I can not install Windows XP English version.
    Please, hint me how can I reistall Windows XP English on my notebook.
    May be something with old BIOS version and I has to update it?
    Should I use other menu in BIOS for installation (actually I used all of them)?
    Or anything else? Please, advice.
    Or I has to learn German? )))
    Looking forward for any help.
    Cheers
    Vittor

    Hi and welcome..
    leave short your german XP on your T40 ... you need it to update BIOS..
    first i prefer to update your BIOS ... Download this T40 BIOS 
    Version: 1RETDRWW (3.23) Release Date: 2007/07/03
    you see this is abit newer ... follow the instructions to update...if update is successfull...you can go in BIOS
    look at tab startup ... change startup sequence so that DVD/CD Drive is on first place and usb-device on second and HDD on third you can move this via F5 / F6.. exit and save with F10 ...
    Download all drivers that you need from this page and save them on extra USB Stick or external HDD...you will need this to complete your install after XP is fresh installed
    T40 Driver Table
    Insert your English XP with SP3 in DVD/CD Drive and restart...
    if a message comes press space to install from CD ...
    follow the instructions.. delete (format drive C: where the german XP is ... and install XP in english..
    when installation process is done... look at device manager you see many yellow questionmarks ..no installed drivers... Now use the pre-downloaded drivers from external HDD/USB Device... keep in mind that drivers are compressed when clicking on that the driver first deflates to c:\drivers\win\ [foldername]... sometimes you have to go in the correct folder and start setup to install it for real...
    or you can install TVSU ThinkVantageSystemUpdater:
    TVSU
    that helps you .. but in that case you have to install Wireless or Cable Network first...
    i dont prefer this because at this time you dont have a antivirus program ..
    a small and good advice is AntiVir you can freewareversion download here
    Free Antivir English
    So good luck ...with fresh "english XP" on your T40...
    sincerely KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Maybe you are looking for

  • Do I need a cable connecting my Time Capsule to Airport Express if I want to use the AE to extend my wifi network range?

    I'm a bit confused by conflicting advice given by my local Apple shop and my internet provider.  My cable modem is plugged into a Time Capsule which I use to access the net wirelessly almost all over the house.  The one spot the wireless doesn't quit

  • How can i tell if javascript is on? How do i turn it on/off?

    One of the answers on your support page says JavaScript is on by default. A webmaster at a page I visited said the reason clicking on his email address did not automatically load Outlook is because JavaScript is turned off. If it is turned off, I don

  • Cange chord strips for smart guitar

    Hi, I am looking to change the selection of chords in the smart guitar, but idot know how. I would like to add an A Minor. Can anyone help me configure the chord strips? Thanks, Michael

  • IMovie won't let me export in HD

    I imported an MP4 into iMovie, set the project preference to 16:9 and it still won't let me export the movie in anything but the "tiny and mobile" options.  The "medium, large and HD" options are greyed out. What could be the problem?  thanks

  • SAB ABAP CERTIFICATION

    Hi all, I want to write sap abap certification exam in india without undergoing training , so I want to know how many years of experience should I have to write exam without undergoing training.I am currently working for an MNC having less than 1 yea