Remove Exchange 2010 DC from single server environment coexisting with Exchange 2013

My new Exchange server (2013) has completed all the migration steps including public folders. Mail is working well.  I do not use the old DC running Exchange 2010 for any local domain logins or computer control, it is strictly for OWA as is my new Exchange
2013.  I went through the uninstall of Exchange 2010 with out error but cancelled it after it said it was ready to uninstall. When I shut down Exchange 2010 server mail no longer is available.  What am I missing? I am using same Public IP and different
private (192.168.1.4 new EXchange 2013, 192.168.1.7 for Exchange 2010) I changed these settings in my asa Firewall and that is working with new settings as well.  Send and Receive connectors are on new while old one have been deleted.  Do my MX records
need to be updated to reflect new server (ex2) as opposed to old server name (ex)? 
You can come to Maui for a "Site Inspection" lol!
System Admin

Hi
You need to make sure all your DNS settings are correct with the new server IP as well as autodiscover. Remove any routing connectors between exchange 2010 and 2013.
Not best practice to run exchange on a DC but if you comfortable you have migrated all system mailboxes, user mailboxes and that the settings on your new server match the old one then proceed with the uninstall.
Your ISP will obviously route mail to your firewall as you are doing the NAT from there.

Similar Messages

  • Exchange 2010 ambiguous URL'S issue while coexist with exchange 2013

    Hi ,
    Please correct me if i am wrong and also all of you tell me your valuable suggestions.
    Like as said in the below article we are having an exchange 2010 ambiguous url's in place.
    Referred
    article : 
    http://blogs.technet.com/b/exchange/archive/2013/05/23/ambiguous-urls-and-their-effect-on-exchange-2010-to-exchange-2013-migrations.aspx
    As said in this article, if we have exchange 2010 ambiguous url's in place we will face issues during exchange 2013 coexistence.I agree with that point .
    Question : On such case why don't we use a separate namespace for internal and external outlook anywhere settings in exchange 2013 which is different from cas array name and also there is no need to disturb the existing exchange 2010
    environment by changing the rpc client access attribute in exchange 2010 databases or by forcing the exchange 2010 internal outlook clients to connect via OA. Please clarify my doubt and say whether the mentioned scenario is possible or not ?
    Note : Same time please consider the new namespace which is going to be utilized on exchange 2013 outlook anywhere settings is available on SAN certificate.
    Regards
    S.Nithyanandham

    Hi ,
    Please someone shed light on this case.
    Regards
    S.Nithyanandham
    Thanks & Regards S.Nithyanandham

  • Custom workflow - How to go from single server to multiple?

    I have been working on a project that involves developing a custom workflow activity for SharePoint 2013. I am developing it in a single server environment working with http. My problem occurs when deploying to multi-server environment with https (WFE, APP).
    My question is how to deploy my solution to the new environment. 
    The steps:
    Create a project - c# activity library
    Add a workflow activity, add .xml
    Deploy the .dll and .xml of project to "C:\Program Files\Workflow Manager\1.0\Workflow\Artifacts" "C:\Program
    Files\Workflow Manager\1.0\Workflow\WFWebRoot\bin"
    net sotp "Workflow Manager Backend"
    net start "Workflow Manager Backend"
    gacutil to deploy the .dll to GAC
    iisrest
    Create a project - empty SharePoint 2013 project
    Add a workflow custom activity to project
    Edit .actions4 and .xaml (my custom code from previous project is in this project now that i can drag and drop in .xaml)
    Deploy to server, activate feature, open SharePoint Designer 2013 and choose the custom action that now appears when creating a 2013 workflow
    This all works fine and dandy on my single server environment. Workflow is working like a charm. How should I go about deploying this to a multi-server environment with https? Does that server need Visual Studio on it also? I have continued to deploy the
    .dll and .xml to the workflow manager backend folders. I have continued to deploy the .dll to the GAC also. When I upload the solution to the new site, it continues to work. When I open designer to create the workflow, it breaks and i cannot create or edit
    any of the workflows on that site. Do i need to be doing something different because i am going from a http environment to https?
    Let me know if this is unclear or if anyone needs more information. Thanks

    If I understand correctly, your workflow still working fine in multi-servers farm but having problem in SharePoint designer. As far as I understand your custom activities should be deployed in the server where your workflow manager is running. Good architecture
    would be to put the workflow in app server (or in it's separate server). But if you are also using HTTPs in multi-server farm whereas the workflow configured over HTTP, you might need to register the workflow (I'm not quite sure though, so you can try in some
    test environment first).
    I've worked with SharePoint 2013 workflow but I intentionally didn't develop custom activity. Rather I develop custom WCF service in SharePoint. And then used the service from workflow. This is how I could use a separate dedicated server for workflow (if
    needed ever) without having any reference to SharePoint DLLs from inside workflow.
    Thanks,
    Sohel Rana
    http://ranaictiu-technicalblog.blogspot.com

  • Intermittend DNS resolution, timeserver, group policy updates errors in client logs in Win 2012 R2 single server environement

    We recently switched hardware and server software Win SBS 2008 to 2012R2 for a small network roughly 40 clients (Win7 Pro / Win 8.1 Pro) about 16 running concurrently at a given time and one network printer with the printer queue residing on the DC as well.
    I read that a single server environment might not be ideal in particular no fail-over but that is an accepted risk in this particular network here.
    Errors:
    Error 1043: Timeout during name resolution request
    Error 1129: Group policy updates could not be processed due to DC not available
    Error 5719: Could not establish secure connection to DC, DC not available
    Occasionally but disappears after a while
    Error 134: As a result of a DNS resolution timeout could not reach time server
    Symptoms
    On Win 7 Clients
    Network shares added through Group Policy will not show sometimes
    Network shares disconnect (red X) and when accessed return access authorization error after one or two clicks on the share finally grant access again
    When the issue with accessing network shares occurs, it usually also affects Internet access meaning a 'server not responding' error appears in the browser windows when trying to open just any web page
    nslookup during the incident returns cannot resolve error
    ipconfig on client shows correct default router (VDSL Router) and DHCP / DNS Domain Controller
    Also, the Win system log shows the above errors during these incidents, however, the nuimber of incidents vary from 20-30
    On Win 8.1 Clients
    Same as above with the slight variation for network shares apparently due to Server 2012 and Win 8.1 clients managing drive shares differently. However, network share refresh does not work with this clients. In most cases only a gpupdate /force returns
    drive shares but usually only for the active session. After logoff / logon the shares are gone again.
    The issue does appear to be load related since it occurs even if there are only one or two workstations active.
    Server Configuration
    Dell R320 PowerEdge 16GB / 4TB 7200RPM RAID10 / GBitEthernet
    Zyxel 1910-48 Port Switch
    VDSL 50Mbps Down / 20Mbps Up
    Since the DC is the only local DNS and there are no plans to add another one or move DNS to another server, the DNS server is configured with this own address as preferred DNS with three DNS forwarders 1) VDSL Router 2) ISP DNS1 3) ISP DNS2
    Currently only one Network card is active for problem determination reasons.
    There appears to be no consensus concerning IPV6 enabled or disabled, I tried both with no apparent effect
    I have set all network cards server and client to Full Duplex and the same speed, also disabled Offload functions within the adapter settings. Some but no consistent improvements.
    Best Practice Analyzer Results
    DNS server scavening not enabled
    Root hint server XYZ must respond to NS queries for the root zone
    More than one forwarding server should be configured (although 3 are configured)
    NIC1 should be configured to use both a preferred and alternate DNS (there is only one DNS in this network)
    I have found some instructions to apply changes to the clients through a host file but I would rather like to understand whether this DNS response time issue can be resolved on the server for example timing setting perhaps. Currently the DNS forwarders are
    set to 3 second.
    Since a few people have reported issues with DNS but most are working with multi DNS, DC environment I could not really apply any suggestions made there. perhaps there is anyone like me who is running a single server who has overcome or experience the same
    issues. Any help would be appreciated

    Hello Milos thx for your reply.. my comments below
    1. What does it "switched"? You may mean migration or new installation. We do not know...
    >> Switched is probably the incorrect term, replaced would be the appropriate wording. Before, there was a HP Proliant Server with SBS 2008 with distinct domain and now there is a Dell Server with MS 2012 R2 with a distinct domain. Client were
    removed from one (SBS) domain and added to the new Server 2012 domain. Other components did not change for example same Network Switch or VDSL Router, Workstations and Printer
    2. Two DCs are better alternative. Or backup very frequently. There are two groups of administrators. Those who have lost DC and those who will experience this disaster in near future.
    >> Correct, and I am aware of that
    3. NIC settings in W 7 and W 8.1, namely DNS points to DC (...and NOTHING else. No public IP or that of router DNS.))
    >> Correct, this is how it's currently implemented. Clients point to DC for DHCP and DNS and Default Router, no public IP or DNS. The only references to ISP DNS exist on the VDSL Router itself as provided through ISP when establishing VDSL
    Link and the list of Forwarders in the DNS Server configuration. However, I have just recently added the ISPs DNS as forwarders for test purposes and will probably learn tomorrow morning whether this had any effect for better or worse.
    4. Do nslookup to RR on clients. RR branch is saying client basic info on LDAP parameters of AD.
    >> Will post as soon as available
    5. I do not use forwarders and the system works
    >> Ok, does this mean it works for you in a similar or the same infrastructure setup or are you saying it is not required at all and I can remove any forwarder in a scenario like mine? If not required can you explain a bit more why it is not
    required apart from that it does work for you that way?
    6. DHCP should sit on DC (DHCP on router is disabled)
    >> Correct, no other device is configured to provide DHCP service other than DC and DHCP is currently running on DC
    7. NIC settings in DC points to itself (loopback address 127.0.0.1)
    >> Are you sure this is still correct and does apply to Server 2012? I am reading articles stating that it should be the servers own IP but local loop or should this be added as alternate DNS in addition to the servers own IP?
    8. Use IPCONFIG /FLUSHDNS whenever you change DNS settings.
    >> OK, that was not done every time I changed some settings but I can do that next week. Reboot alone would not suffice, correct?
    9. Test your system with dcdiag.
    >> See result below
    10. Share your findings.
    Regards
    Milos
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
      Home Server = GSERVER2
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
    Testing server: Default-First-Site-Name\GSERVER2
          Starting test: Connectivity
             ......................... GSERVER2 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\GSERVER2
          Starting test: Advertising
             ......................... GSERVER2 passed test Advertising
          Starting test: FrsEvent
             ......................... GSERVER2 passed test FrsEvent
          Starting test: DFSREvent
             ......................... GSERVER2 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... GSERVER2 passed test SysVolCheck
          Starting test: KccEvent
             ......................... GSERVER2 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... GSERVER2 passed test
             KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... GSERVER2 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... GSERVER2 passed test NCSecDesc
          Starting test: NetLogons
             ......................... GSERVER2 passed test NetLogons
          Starting test: ObjectsReplicated
             ......................... GSERVER2 passed test
             ObjectsReplicated
          Starting test: Replications
             ......................... GSERVER2 passed test Replications
          Starting test: RidManager
             ......................... GSERVER2 passed test RidManager
          Starting test: Services
             ......................... GSERVER2 passed test Services
          Starting test: SystemLog
             ......................... GSERVER2 passed test SystemLog
          Starting test: VerifyReferences
             ......................... GSERVER2 passed test VerifyReferences  
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : GS2
          Starting test: CheckSDRefDom
             ......................... GS2 passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... GS2 passed test CrossRefValidation  
       Running enterprise tests on : GS2.intra
          Starting test: LocatorCheck
             ......................... GS2.intra passed test LocatorCheck
          Starting test: Intersite
             ......................... GS2.intra passed test Intersite
    Server:  gserver2.g2.intra
    Address:  192.168.240.6
    *** gserver2.g2.intra can't find g2: Non-existent domain
    > gserver2
    Server:  gserver2.g2.intra
    Address:  192.168.240.6
    g2.intra
            primary name server = gserver2.g2.intra
            responsible mail addr = hostmaster.g2.intra
            serial  = 443
            refresh = 900 (15 mins)
            retry   = 600 (10 mins)
            expire  = 86400 (1 day)
            default TTL = 3600 (1 hour)
    > wikipedia.org
    Server:  gserver2.g2.intra
    Address:  192.168.240.6
    Non-authoritative answer:
    wikipedia.org   MX preference = 10, mail exchanger = polonium.wikimedia.org
    wikipedia.org   MX preference = 50, mail exchanger = lead.wikimedia.org
    polonium.wikimedia.org  internet address = 208.80.154.90
    polonium.wikimedia.org  AAAA IPv6 address = 2620:0:861:3:208:80:154:90
    lead.wikimedia.org      internet address = 208.80.154.89
    lead.wikimedia.org      AAAA IPv6 address = 2620:0:861:3:208:80:154:89
    Final benchmark results, sorted by nameserver performance:
     (average cached name retrieval speed, fastest to slowest)
      192.168.240.  6 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      + Cached Name   | 0,001 | 0,002 | 0,003 | 0,001 | 100,0 |
      + Uncached Name | 0,027 | 0,076 | 0,298 | 0,069 | 100,0 |
      + DotCom Lookup | 0,041 | 0,048 | 0,079 | 0,009 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                 gserver2.g2.intra
                    Local Network Nameserver
      195.186.  4.162 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,022 | 0,023 | 0,025 | 0,000 | 100,0 |
      - Uncached Name | 0,025 | 0,071 | 0,274 | 0,065 | 100,0 |
      - DotCom Lookup | 0,039 | 0,040 | 0,043 | 0,001 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                         cns8.bluewin.ch
               BLUEWIN-AS Swisscom (Schweiz) AG,CH
      195.186.  1.162 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,022 | 0,023 | 0,026 | 0,001 | 100,0 |
      - Uncached Name | 0,025 | 0,072 | 0,299 | 0,066 | 100,0 |
      - DotCom Lookup | 0,039 | 0,042 | 0,049 | 0,003 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                         cns7.bluewin.ch
               BLUEWIN-AS Swisscom (Schweiz) AG,CH
        8.  8.  8.  8 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,033 | 0,040 | 0,079 | 0,011 | 100,0 |
      - Uncached Name | 0,042 | 0,113 | 0,482 | 0,097 | 100,0 |
      - DotCom Lookup | 0,049 | 0,079 | 0,192 | 0,039 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                 google-public-dns-a.google.com
                     GOOGLE - Google Inc.,US
      UTC: 2014-11-03, from 14:33:12 to 14:33:29, for 00:17,648
    15: 40
    192.168.240.  6 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      + Cached Name   | 0,001 | 0,002 | 0,004 | 0,000 | 100,0 |
      + Uncached Name | 0,025 | 0,074 | 0,266 | 0,063 | 100,0 |
      + DotCom Lookup | 0,042 | 0,048 | 0,075 | 0,007 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                 gserver2.g2.intra
                    Local Network Nameserver
      195.186.  1.162 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
      - Uncached Name | 0,024 | 0,073 | 0,289 | 0,067 | 100,0 |
      - DotCom Lookup | 0,039 | 0,041 | 0,043 | 0,001 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                         cns7.bluewin.ch
               BLUEWIN-AS Swisscom (Schweiz) AG,CH
      195.186.  4.162 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
      - Uncached Name | 0,025 | 0,073 | 0,286 | 0,065 | 100,0 |
      - DotCom Lookup | 0,041 | 0,066 | 0,180 | 0,037 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                         cns8.bluewin.ch
               BLUEWIN-AS Swisscom (Schweiz) AG,CH
        8.  8.  8.  8 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,033 | 0,038 | 0,077 | 0,009 | 100,0 |
      - Uncached Name | 0,042 | 0,105 | 0,398 | 0,091 | 100,0 |
      - DotCom Lookup | 0,049 | 0,066 | 0,141 | 0,025 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                 google-public-dns-a.google.com
                     GOOGLE - Google Inc.,US
      UTC: 2014-11-03, from 14:39:59 to 14:40:12, for 00:13,363

  • Do I need DFSR in a single server environment?

    I have a 2012 Host, running a single 2012 Guest.  Guest is running as a DC with AD, DNS, DHCP, and File Services.  DFSR is running, and it gives a warning every time my back runs (Backup is running on Host).  Warning is The DFS Replication
    service stopped replication on volume F:......and long message about Database, yada yada yada.  
    Do I need to run DFSR?  Again, single server, no file replication to different offices.  I'm not finding a clear answer to that question.
    Second, Server Manager should, according to TechNet, have under the Tools option the ability to turn off DFSR.  I cannot find that option.  So, IF I can turn it off, can I simply disable the DFS Namespace and DFS Replication services?  
    I would prefer eliminating rather than ignoring warnings.
    Thanks

    Sorry, one more time.  I have a single server environment, there is NO upstream domain controller, no replication between DC's.  There is ONE DC.  So, this is digressing into two questions.  One, why do I need to run DFSR (again, lots
    of articles talking about how to turn it off, and not as a discussion of temporary turn off https://msdn.microsoft.com/en-us/library/cc753144.aspx) in a single server, single domain, non-replicating environment.  
    Second, how do I address the warning I receive during my backup?  It appears to be caused by a replication error to downstream servers, since there is no downstream server, I should be able to resolve it by turning DFSR off.  I would like some
    documentation discussing the issue of turning it off in a non-DFS environment.
    The DFS Replication service stopped replication on volume F:. This occurs when a DFSR JET database is not
    shut down cleanly and Auto Recovery is disabled. To resolve this issue, back up the files in the affected replicated folders, and then use the ResumeReplication WMI method to resume replication. 
    Additional Information: 
    Volume: F: 
    GUID: 65E46942-B9D6-11E3-9400-00155D325402 
    Recovery Steps 
    1. Back up the files in all replicated folders on the volume. Failure to do so may result in data loss due
    to unexpected conflict resolution during the recovery of the replicated folders. 
    2. To resume the replication for this volume, use the WMI method ResumeReplication of the DfsrVolumeConfig
    class. For example, from an elevated command prompt, type the following command: 
    wmic /namespace:\\root\microsoftdfs path dfsrVolumeConfig where volumeGuid="65E46942-B9D6-11E3-9400-00155D325402"
    call ResumeReplication 
    For more information, see http://support.microsoft.com/kb/2663685.  
    Jeff Ferris

  • Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

    Hi,
    I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
    Tried manually start services, it started successfully but again goes down within few seconds automatically.
    Reboot server. but no luck.
    Any help.
    MD

    Hi,
    I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
    In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Installation of Exchange 2010 in Windows 2012 Server

    Hi all,
    We are planning to upgrade our current Exchange 2003 to Exchange 2010, Need some help on installation and Support of Exchange 2010 in Windows 2012 Server, as per the
    https://technet.microsoft.com/library/ff728623(v=exchg.150).aspx Exchange 2010 with sp3 is supported in Windows 2012 but I am unable to find the installer of Ex 2010 with sp3
    in web even in MSDN. There is only Ex 2010 with Sp1 available. I know that after installing ex2010 with sp1 version, I can install sp3 later but I found one link
    http://www.petenetlive.com/KB/Article/0000785.htm where it is mentioned that insllation can be done only after doing the registry settings.
    So is any one who has installed Ex 2010 in Windows 2012 Server and faced this issue and any solution.
    Thanks
    Mukesh
    Mukesh Bisht

    You can easily install Exchange 2010 (SP3) on Windows Server 2012. If you are working with previous SP version’s you can easily upgrade after installing server. And registry settings
    are used to fix an error which may occur during migration, so it is not mandatory to correct registry settings each time during migration.
    You can find detailed information about installing Exchange 2010 (SP3) on Windows Server 2012 at this blog :http://oxfordsbsguy.com/2013/03/24/how-to-install-exchange-2010-sp3-on-windows-server-2012/

  • HT1277 How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info Messages on server.

    How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info > Messages on server. What am I doing wrong?

    Mail > Preferences… > Accounts > Advanced > Remove copy from server after retrieving a message

  • How to remove my icloud mail from icloud server ?

    how to remove my icloud mail from icloud server ?

    If you don't want to keep it, select it, on the iCloud website Mail page click the Trash icon in the toolbar to move it to the Trash, then click the cogwheel icon at top right and choose 'Empty Trash'. Or in the Mail application drag the messages to the Trash and from the Mailbox menu choose 'Erase deleted items' then 'iCloud'.
    If you want to keep it, in the Mail application drag the messages to another mailbox under 'On My Mac'.

  • How do i remove the exif metadata from my jpg file produced with a digital camera photo?

    How do i remove the exif metadata from my jpg file produced with a digital camera photo?

    The excellent and free utility Irfanview has the option to remove the EXIF data.
    Simply open and the file and do a Save, or Save As with the original name.
    Surprisingly, the default is to not keep the original EXIF data.

  • Issue in Synchronizing with Exchange 2010 Hub and Edge server

    Dear Sir,
    We have an issue with the installation of Exchange edge server 2010 SP1.
    We installed exchange edge server on DMZ but unable to do the subscription between edge server and hub server. Tried to check from the edge server whether the ports (50389 & 50636) are listening. Both are listening without any issues. After the
    edge subscription is done and when pass the command start -edgesynchronization we are getting the below error:
    Unable to contact the edgesync service.
    +catogary                      :ReadError: (:) [start-edgesynchronization], Endpoint not registered exception
    +Fullyqualifiederrorid      : FE1A5BE2, Microsoft.Exchange.Management.Edgesync.SyncNowTask
    Please help me in rosolving the issue with regards to Edge Server.
    Thank & Regards
    Suraj Sreekumar

    Hi Suraj,
    Try to Re subscribe the HUB & EDGE serve, Create  XML file on the EDGE server, Removed the Edge subscription from the HUB server and Restart the Transport & ADAM service
    Then Ran Start & Test-EdgeSynchronization cmdlet on the Exchange Management Shell on Hub, again Restart the Transport server on the HUB & ADAM service on the EDGE .
    White Paper: Edge Subscription and Synchronization
    http://technet.microsoft.com/en-us/library/bb310755(EXCHG.80).aspx#EdgeSyncsynchronization
    Anil

  • Exchange 2010 masquerade from a non-authoritative domain

    I have several sendmail servers who send mails as coming from their host names(hostname.localhost). I would like to have exchange change this to the exchange mail domain then send to the exchange users
    Is there a way to setup masquerading for this?
    thanks for your time
    -Steve

    Hi Steve,
    According to description, I understand that you want to change the domain name to Exchange mail domain for inbound message.
    If I misunderstand your concern, please do not hesitate to let me know.
    Do you have install Edge server in your environment? If so, we can enable Address Rewrite Agent and configure Address Rewrite Entry to achieve your goal.
    In Microsoft Exchange Server 2010, address rewriting enables you to modify the addresses of senders and recipients on messages that enter and leave your Exchange 2010 organization. More details about Address Rewriting, for your reference:
    https://technet.microsoft.com/en-us/library/aa996806(v=exchg.141).aspx
    https://technet.microsoft.com/en-us/library/bb123966%28v=exchg.141%29.aspx?f=255&MSPPError=-2147217396
    Best Regards,
    Allen Wang

  • [SOLVED] Can't add a node to the cluster with error (Exchange 2010 SP3 DAG Windows Server 2012)

    Hi there!
    I have a problem which makes me very angry already :)
    I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
    I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
    Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
    LOGS on the second nodes: 
    Application Log
    "Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
    Failover Clustering Diagnostic Log
    "[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
    CMDLET Error:
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:06:21
    MSC-CO-EXC-02V
    Failed
    Error:
    A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
    (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
    An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
    This operation returned because the timeout period expired
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
    Warning:
    Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
    Warning:
    The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
    Exchange Management Shell command attempted:
    Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
    Elapsed Time: 00:06:21
    UPD:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.
    Please, help me if you can.

    Hi, Jared! Thank you for the reply.
    Of course I did it already :) I have new info:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.

  • Exchange 2010 Provisioning from OIM 11g

    I am having trouble provisioning to Exchange 2010. The error I am receiving is "Empty Arguments Passed in either Root Context,Admin FQDN,Admin Password,Server Address,Port Number in the IT Resource." I don't recall setting any of these parameters as part of the Exchange IT Resource. Do these come from the AD IT Resource or some Lookup object that I have missed? During the request I only specified AD Server, Mail Store and Mail Alias.
    Thanks,
    Pete

    Check the values in ADITResource. Yes these come from ADITResource.

  • Recover exchange 2010 to a new server

    I recently took over a position here at this company. The exchange server had 2gb left on the C drive. I had to disable windows updates and clear logs just for email to begin working again. That exchange server had since failed, but was able to recover it
    by just dumping the raid array into an identical machine. However I suspect this machine will soon fail itself. 
    I purchased a brand new server to move exchange over to, im wondering if there is any documentation anywhere where I can do a backup, then restore exchange and mailboxes to the new machine without breaking links to our Cisco VM system, client mailbox configurations,
    mobile phone setups, SSL cert, ect. Basically just to restore exchange 2010 on Server 2008 64 to a brand new machine and have it continue from there. Has anyone done this or can point in the direction of documentation for this? 

    What is the current status of Old Exchange Server?
    What is the size of WINSXS folder?
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Maybe you are looking for

  • Pages '09 won't open on MacBook running 10.5.8

    Was running Pages 09 on 10.5.8 MacBook for quite some time. It suddenly stopped working. It won't start. It doesn't start and crash, it just does not start at all. Nothing happens. I resolved and disabled all fonts in Font Book, trashed the plist fil

  • Download vs retail purchase

    Hi all, I was under the impression that if you bought Photoshop Elements, you received both the Windows AND the Mac versions.  I looked at the retail media at Best Buy and saw it has both versions.  I assumed that if I bought it through the Adobe Sto

  • Socket Communication between java client and c++ server

    HI, In my project,I want to do the following: 1.Sending datas from client to server. 2.Getting the response from server to client. I written the client in java.but the server is in c++. Is it possible to communicate with the server using java codings

  • Exchange rate conversion in Expense claim

    HI there The user community for my travel variant would like to enter both the foreign currency amount and the converted amount i.e. this would cause the actual exchange rate to be calculated as opposed to the converted amount being calculated. Is th

  • Controls on the side of the Real Matrix what do they do?

    When you place a matrix on the Front Panel it comes with a set of two number controls on the left. Clicking on the help option only produces : "Real Matrix  No description available" I have the student's version.