Remove faces messages from context

Hi,
I am using below code to remove messages from context.
But unable to remove messages.
Please any one help me how to remove faces messages from context.
Iterator iterator = FacesContext.getCurrentInstance().getMessages();
while (iterator.hasNext()) {
iterator.remove();
}Thanks,
sivareddy
Edited by: sweetreddy2001 on Aug 26, 2009 6:56 PM

Check the topic right below yours in the topic listing. The same question was asked and answered some hours ago.

Similar Messages

Weblogic 10.3 Not Removing Expired Messages from JMS Queues

Dear All,
We have an application that is running on Weblogic 10.3.
This application (let us call this application Y) receives messages on a JMS queue. These messages are placed on the queue by another application (let us call this application X). We would like to have these messages expire within a certain amount of time (i.e. 90000 ms) if they are not consumed.
Now when application X places the messages onto the queue for application Y to consume, the JMS producer sets the time to live to 90000 ms. We can see that expiration time has been set appropriately in the weblogic console. If a message sits on the queue for longer than 90000 ms the state string of the message is changed to "receive expired". What we don't understand is why the expired messages still end up being consumed from the queue.
We understand that Weblogic is supposed to have an 'Active Message Expiration' thread that will remove expired messages from the queue. The Expiration Scan Interval for the JMS Server is set to 30 (seconds).
Can anyone tell us why our expired messages don't seem to be deleted from the queues?
Tim

Thank you for the response Rene.
We have set up both the active expiration scan and the message expiration policy. The active expiration scan is set for every 30 seconds. The message expiration policy is set to "discard". However, the expired messages are still being consumed. Is it possible we are doing something wrong? See a portion of our configuration files below.
We have set up the expiration scan time interval. See a portion of our config.xml below:
<jms-server>
<name>brokerJMSServer</name>
<target>AdminServer</target>
<persistent-store xsi:nil="true"></persistent-store>
<store-enabled>true</store-enabled>
<allows-persistent-downgrade>false</allows-persistent-downgrade>
<hosting-temporary-destinations>true</hosting-temporary-destinations>
<temporary-template-resource xsi:nil="true"></temporary-template-resource>
<temporary-template-name xsi:nil="true"></temporary-template-name>
<message-buffer-size>-1</message-buffer-size>
*<expiration-scan-interval>30</expiration-scan-interval>*
<production-paused-at-startup>false</production-paused-at-startup>
<insertion-paused-at-startup>false</insertion-paused-at-startup>
<consumption-paused-at-startup>false</consumption-paused-at-startup>
</jms-server>
<jms-system-resource>
<name>broker-jms</name>
<target>AdminServer</target>
<sub-deployment>
<name>EhrBrokerRequestQueue</name>
<target>brokerJMSServer</target>
</sub-deployment>
<descriptor-file-name>jms/broker-jms.xml</descriptor-file-name>
</jms-system-resource>
<admin-server-name>AdminServer</admin-server-name>
We have set up the message expiration policy in our jms descriptor. See a portion below:
<?xml version='1.0' encoding='UTF-8'?>
<weblogic-jms xmlns="http://www.bea.com/ns/weblogic/weblogic-jms" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-jms http://www.bea.com/ns/weblogic/weblogic-jms/1.0/weblogic-jms.xsd">
<queue name="EhrBrokerRequestQueue">
<delivery-params-overrides>
<redelivery-delay>-1</redelivery-delay>
</delivery-params-overrides>
<delivery-failure-params>
<redelivery-limit>-1</redelivery-limit>
*<expiration-policy>Discard</expiration-policy>*
</delivery-failure-params>
<jndi-name>EhrBrokerRequestQueue</jndi-name>
</queue>
</weblogic-jms>
What could we be doing wrong?
Kind Regards,
Tim

How do i remove recovered messages from my email

I need help removing recovered messages from my email.

I posted a very similar question. The answers I received here did not help. For anyone else looking, here is the solution that finally worked. My son found it via a Goolge search:
Best answer - Sarah (Google Employee) Go to this answer
chessop
Please follow below steps.
1.Take your gmail account offline from Mail and delete the recovered messages folder.
2. Download the widget to show the hidden files fromhttp://www.apple.com/downloads/dashboard/developer/hiddenfiles.html
3. Go to UserName/Library/Mail/IMAP-<username>@[email protected]/.OfflineCache
4. Delete all the data under .OfflineCache folder - DO NOT DELETE the folder.
5. Close Mail application and reopen.
This should do the job.
Best regards,
Aadi
338 of 359 people found this answer helpful. Did you? Sign in to vote. Report abuse
See the answer in context

Removing superseded messages from the queue

Does JSMQ provide any way for a producer to remove a message from the queue which it queued some time ago but which it no longer wishes to send?
I am investigating the use of JSMQ in a military battlemap application connecting nodes over low bandwidth/unreliable connections. The reason we want to be able to remove messages is as follows: Say a producer sends a low priority message to the queue regarding a unit's position. Later on the same producer sends an update regarding the same unit to the queue. If the first message is still present in the queue (ie has not been sent yet) then we want the producer to be able to remove it as it is now superseded by the new message and we don't want to waste bandwidth sending the old message first.
I know we can set an expiry time on messages, but this doesn't really solve our problem. We want the original message to stay in the queue indefinately (until it is read by the consumer) unless it is superseded by a new message in which case we want to remove it.
Thanks
Roger

Hi Roger,
JMS does not support the removal of messages from a queue
as you described. I can't think of a way to not deliver the old
message once it was already sent.
Alternatives I can think of:
- Adjust the interval at which the consumer reads the messages
off the queue and/or the number of messages that are read;
so that the consumer will see the old and new messages
and can decide which one to use. This does not address the
bandwidth issue but allows the consumer to behave smarter.
- Similar to above, but on the producer side. The producer waits
for some interval before sending a message, in case an
updated position of a unit arrives at the producer. This might not
be good if a consumer needs to know the location of a unit as
soon as it is available.
- Use a topic instead of a queue. When using queues, old
messages (containing old positions) sent to a queue are kept
until the consumer reads it. With topics, if no consumers are
around, the message is tossed. However, if you really need old
messages to lie around (e.g. need to know last position of
unit), this won't suit your needs.
Sorry I don't have a straight answer for you, hope this helps
somewhat.
-i
http://wwws.sun.com/software/products/message_queue/index.html

Re: Remove log messages from loop

CURSOR cur_item_rev_child IS
SELECT ffv.flex_value, --org code
mp.organization_id
FROM fnd_flex_values ffv,
fnd_flex_value_sets ffvs,
mtl_parameters mp
WHERE ffv.flex_value_set_id = ffvs.flex_value_set_id
AND ffvs.flex_value_set_name = 'EMR Add Spec Org' -- Changed by WIPRO on 01-OCT-12 (SR # 1078990 )--
AND NVL(ffv.enabled_flag, 'N') = 'Y'
AND ffv.flex_value = mp.organization_code
AND mp.master_organization_id = v_num_master_org;
CURSOR cur_item_rev (i_num_organization_id NUMBER)
IS
SELECT /*+ index(xvasd XXINV_VLVS_ADD_SPEC_DETAILS_N1 )*/mirb.inventory_item_id,
mirb.organization_id,
MAX(mirb.revision) item_revision,
msib.segment1, -- Added by Infosys on 19-May-09
xvasd.spec_revision spec_revision -- Added by Infosys on 19-May-09
FROM xxinv_vlvs_add_spec_details xvasd,
xxinv_vlvs_item_add_spec xvias,
mtl_parameters mp,
mtl_system_items_b msib,
mtl_item_revisions_b mirb
WHERE xvasd.spec_number = xvias.spec_number
AND xvasd.spec_type = xvias.spec_type
AND xvias.spec_type = v_chr_spec_type
AND xvasd.spec_status='ACTIVE'
AND xvias.inv_item_id = msib.inventory_item_id
AND mirb.inventory_item_id=msib.inventory_item_id
AND xvias.organization_id = msib.organization_id
AND msib.organization_id = mirb.organization_id
AND mirb.organization_id = mp.organization_id
AND mp.organization_id = i_num_organization_id
--AND LPAD (xvasd.spec_revision, 3, 0) LPAD (b.revision, 3, 0)
GROUP BY mirb.inventory_item_id,
mirb.organization_id,
msib.segment1,
xvasd.spec_revision;
BEGIN
o_chr_errbuf := 'Program Completed Successfully';
o_num_retcode := 0;
fnd_file.put_line(fnd_file.output,
fnd_file.put_line(fnd_file.output,
' EMR INV Item Revisions Update Program VLVS');
fnd_file.put_line(fnd_file.output,
fnd_file.put_line(fnd_file.output, '');
--Starting the Program
fnd_file.put_line(fnd_file.LOG,
fnd_file.put_line(fnd_file.LOG,
' EMR INV Item Revisions Update Program VLVS');
fnd_file.put_line(fnd_file.LOG,
fnd_file.put_line(fnd_file.LOG, '');
fnd_file.put_line(fnd_file.LOG, 'Input Parameter');
fnd_file.put_line(fnd_file.LOG, '---------------');
fnd_file.put_line(fnd_file.LOG, 'Debug Mode: ' || v_chr_debug_mode);
fnd_file.put_line(fnd_file.LOG, '');
fnd_file.put_line(fnd_file.LOG,
-- Get the value of the spec type from the lookup. If no value is set then display the error message and raise exception
IF v_chr_spec_type IS NULL
THEN
fnd_file.put_line(fnd_file.LOG,
'Error: Set a value for the profile: XXINV : Additional Spec Type VLVS');
RAISE excp_user;
ELSE
fnd_file.put_line(fnd_file.LOG,
'Processing for the addition spec item type: ' ||
v_chr_spec_type);
END IF;
-- Select all the eligible records for processing
FOR rec_cur_item_rev_child IN cur_item_rev_child
LOOP
FOR rec_cur_item_rev IN cur_item_rev (rec_cur_item_rev_child.organization_id)
LOOP
-- v_chr_spec_rev := NULL;
-- v_chr_item_number := NULL; Commented by Infosys on 19-May-09
/* BEGIN --Start of comments by Infosys on 19-May-09
SELECT segment1
INTO v_chr_item_number
FROM mtl_system_items_b
WHERE inventory_item_id = rec_cur_item_rev.inventory_item_id
AND organization_id=rec_cur_item_rev.organization_id;
EXCEPTION
WHEN NO_DATA_FOUND THEN
v_chr_item_number := NULL;
fnd_file.put_line(fnd_file.LOG,'Item Number not found in MTL_SYSTEM_ITEMS_B Table for the inv item id '
||rec_cur_item_rev.inventory_item_id);
WHEN OTHERS THEN
v_chr_item_number := NULL;
RAISE excp_loop;
END;*/--End of comments by Infosys on 19-May-09
/*BEGIN --Start of comments by Infosys on 19-May-09
SELECT MAX(spec_revision)
INTO v_chr_spec_rev
FROM xxinv_vlvs_add_spec_details xvasd,
xxinv_vlvs_item_add_spec xvias
WHERE xvasd.spec_number = xvias.spec_number
AND xvasd.spec_type = xvias.spec_type
AND xvias.spec_type = v_chr_spec_type
AND xvias.inv_item_id =rec_cur_item_rev.inventory_item_id
AND organization_id=rec_cur_item_rev.organization_id
GROUP BY xvias.inv_item_id,
organization_id,
xvias.spec_type;
EXCEPTION
WHEN NO_DATA_FOUND THEN
v_chr_spec_rev := NULL;
fnd_file.put_line(fnd_file.LOG,'Spec Revision not found in Additional Specs Table for the inv item id '
||rec_cur_item_rev.inventory_item_id);
WHEN OTHERS THEN
v_chr_spec_rev := NULL;
RAISE excp_loop;
END;*/--End of comments by Infosys on 19-May-09
IF LPAD (rec_cur_item_rev.spec_revision, 3, 0) LPAD (rec_cur_item_rev.item_revision, 3, 0)
THEN
BEGIN
v_num_total_cnt := v_num_total_cnt + 1;
--to take count of the total records processed
v_chr_error_flag := 'N'; reset the error flag to N before processing each record
v_num_revision_id := NULL;
IF v_num_total_cnt = 1
THEN
v_chr_output_hdr := 'ORG CODE' ||
RPAD('|ITEM NUMBER', 51, ' ') ||
'|ITEM REV' || '|SPEC REV' ||
'|ERROR REASON';
END IF;
-- Check if the revision on the spec is greater that the revision on the item
IF LPAD (rec_cur_item_rev.spec_revision, 3, 0) > LPAD (rec_cur_item_rev.item_revision, 3, 0)
THEN
BEGIN
SELECT mtl_item_revisions_b_s.NEXTVAL
INTO v_num_revision_id
FROM DUAL;
EXCEPTION
WHEN OTHERS THEN
v_chr_temp_msg := 'Error when getting the new revision id from the sequence MTL_ITEM_REVISIONS_B_S: ' ||
SQLERRM;
RAISE excp_loop;
END;
-- begin block for assigning values and calling API to update the item revisions
BEGIN
v_rec_item_revision.inventory_item_id := rec_cur_item_rev.inventory_item_id;
v_rec_item_revision.organization_id := rec_cur_item_rev_child.organization_id;
v_rec_item_revision.revision_id := v_num_revision_id;
v_rec_item_revision.revision := rec_cur_item_rev.spec_revision;--v_chr_spec_rev;
v_rec_item_revision.revision_label := rec_cur_item_rev.spec_revision;--v_chr_spec_rev;
v_rec_item_revision.revision_reason := 'Updated the Item Revision';
v_rec_item_revision.implementation_date := v_dte_sysdate;
v_rec_item_revision.effectivity_date := v_dte_sysdate;
v_rec_item_revision.attribute_category := NULL;
v_rec_item_revision.attribute1 := NULL;
v_rec_item_revision.attribute2 := NULL;
v_rec_item_revision.attribute3 := NULL;
v_rec_item_revision.attribute4 := NULL;
v_rec_item_revision.attribute5 := NULL;
v_rec_item_revision.attribute6 := NULL;
v_rec_item_revision.attribute7 := NULL;
v_rec_item_revision.attribute8 := NULL;
v_rec_item_revision.attribute9 := NULL;
v_rec_item_revision.attribute10 := NULL;
v_rec_item_revision.attribute11 := NULL;
v_rec_item_revision.attribute12 := NULL;
v_rec_item_revision.attribute13 := NULL;
v_rec_item_revision.attribute14 := NULL;
v_rec_item_revision.attribute15 := NULL;
v_rec_item_revision.description := NULL;
v_rec_item_revision.creation_date := v_dte_sysdate;
v_rec_item_revision.created_by := v_num_user_id;
v_rec_item_revision.last_update_date := v_dte_sysdate;
v_rec_item_revision.last_updated_by := v_num_user_id;
v_rec_item_revision.last_update_login := v_num_login_id;
v_rec_item_revision.request_id := v_num_request_id;
v_rec_item_revision.program_id := v_num_program_id;
v_rec_item_revision.program_application_id := v_num_prog_appln_id;
mtl_item_revisions_util.insert_row(p_item_revision_rec => v_rec_item_revision,
x_rowid => v_chr_ret_rowid);
v_num_succ_cnt := v_num_succ_cnt + 1;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
v_chr_temp_msg := 'Error when updating the revisions: ' ||
SQLERRM;
RAISE excp_loop;
END;
ELSE -- LPAD (cur_item_rev.spec_revision, 3, 0) < LPAD (cur_item_rev.item_revision, 3, 0)
v_chr_temp_msg := 'Item Revision is greater than the Spec Revision';
o_num_retcode := 1;
v_num_err_cnt := v_num_err_cnt + 1;
ROLLBACK;
fnd_file.put_line(fnd_file.LOG, '');
fnd_file.put_line(fnd_file.LOG,
'Organization Code: ' ||
rec_cur_item_rev_child.flex_value); -- added on 05-May-09 by infosys --
fnd_file.put_line(fnd_file.LOG,
'Item Number: ' ||
rec_cur_item_rev.segment1);
fnd_file.put_line(fnd_file.LOG,
'Item Revision: ' ||
rec_cur_item_rev.item_revision); -- v_chr_item_revision_child -- -- added on 05-May-09 by infosys --
fnd_file.put_line(fnd_file.LOG,
'Spec Revision: ' ||
rec_cur_item_rev.spec_revision);
fnd_file.put_line(fnd_file.LOG,
'Error: ' ||
v_chr_temp_msg);
fnd_file.put_line(fnd_file.LOG,
v_chr_output_msg := v_chr_output_msg ||
RPAD(rec_cur_item_rev_child.flex_value, -- added on 05-May-09 by infosys --
8,
' ') || '|' ||
RPAD(rec_cur_item_rev.segment1,
50,
' ') || '|' ||
RPAD(rec_cur_item_rev.item_revision, v_chr_item_revision_child, added on 05-May-09 by infosys --
8,
' ') || '|' ||
RPAD(rec_cur_item_rev.spec_revision,
8,
' ') || '|' ||
v_chr_temp_msg ||
CHR(10);
v_chr_mail_body := v_chr_mail_body ||
RPAD(rec_cur_item_rev_child.flex_value, -- added on 05-May-09 by infosys --
8,
' ') || '|' ||
RPAD(rec_cur_item_rev.segment1,
50,
' ') || '|' ||
RPAD(rec_cur_item_rev.item_revision, v_chr_item_revision_child added on 05-May-09 by infosys --
8,
' ') || '|' ||
RPAD(rec_cur_item_rev.spec_revision,
8,
' ') || '|' ||
v_chr_temp_msg ||
-- Display the statistics details in the output file
fnd_file.put_line(fnd_file.output, '');
fnd_file.put_line(fnd_file.output,
'Number of items selected for update: ' ||
v_num_total_cnt);
fnd_file.put_line(fnd_file.output,
'Number of items updated: ' || v_num_succ_cnt);
fnd_file.put_line(fnd_file.output,
'Number of items not updated: ' || v_num_err_cnt);
fnd_file.put_line(fnd_file.output, '');
fnd_file.put_line(fnd_file.output, v_chr_output_hdr);
* Print out the output message from CLOB variable "v_chr_output_msg"
* Substr each line whenever we find the separator CHR(10)
* Print each line with fnd_file.output function
BEGIN
v_num_offset := 1;
v_num_instr := 0;
LOOP
EXIT WHEN v_num_offset > dbms_lob.getlength(v_chr_output_msg);
-- Get the position of CHR(10) when first time appearence.
v_num_instr := dbms_lob.instr(v_chr_output_msg,
CHR(10),
v_num_offset,
1);
v_num_line_length := v_num_instr - v_num_offset + 1;
-- Substr the each line and print it out
fnd_file.put_line(fnd_file.output,
dbms_lob.substr(v_chr_output_msg,
v_num_line_length - 1,
v_num_offset));
v_num_offset := v_num_offset + v_num_line_length;
END LOOP;
END;
END IF; -- LPAD (cur_item_rev.spec_revision, 3, 0) < LPAD (cur_item_rev.item_revision, 3, 0) --
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
fnd_file.put_line(fnd_file.LOG,
'Porcessing next record as a Error occured in cursor loop cur_item_rev : ' ||
SQLERRM);
END;
END IF;
END LOOP; -- cur_item_rev --
END LOOP; -- cur_item_rev_child --
-- calling the mail procedure --
IF v_num_err_cnt > 0
THEN
BEGIN
fnd_file.put_line(fnd_file.LOG, '');
fnd_file.put_line(fnd_file.LOG,
'Calling send_notification Procedure...');
send_notification(o_chr_ret_code => v_chr_status,
o_chr_ret_mesg => v_chr_temp_msg,
i_chr_subject => 'EMR INV Item Revisions Update Program VLVS - ' ||
v_dte_sysdate,
i_chr_body => v_chr_mail_body);
EXCEPTION
WHEN OTHERS THEN
v_chr_temp_msg := 'Error when calling Procedure send_notification .';
fnd_file.put_line(fnd_file.LOG,
'Error details : ' || v_chr_temp_msg ||
' - ' || SQLERRM);
RAISE excp_user;
END;
END IF;
EXCEPTION
/*WHEN excp_loop THEN
ROLLBACK;
o_chr_errbuf := o_chr_errbuf ||
'Program completed with error when getting the max revision';
o_num_retcode := 2;*/
WHEN excp_user THEN
ROLLBACK;
o_chr_errbuf := o_chr_errbuf || 'Program completed with error';
o_num_retcode := 2;
WHEN OTHERS THEN
ROLLBACK;
fnd_file.put_line(fnd_file.LOG,
'Error in Item Revisions Update Program: ' ||
SQLERRM);
o_chr_errbuf := o_chr_errbuf || 'Program completed with error';
o_num_retcode := 2;
END update_item_revision;

I need to remove the log messages from loop...As currently log file printing is in loop....Can you please tell how to remove log file messages from loop.

Dequeue with OCCI does not remove the message from the queue

Hey there,
I have this problem where no matter what dequeue option I try the messages never seem to be removed from the queue... I tried looking around and found only a similar un-answered question...
Thanks in advance...
void TryAnydataDequeue(oracle::occi::Connection * conn)
     try
          std::cout << "Dequeue Commence..." << std::endl;
          Consumer cons(conn);
          //Settings de dequeue
          cons.setCorrelationId("SPPC");
          cons.setQueueName("Anydata_queue");
          cons.setConsumerName("SNOOP");
          cons.setDequeueMode(cons.DEQ_REMOVE);
          //cons.setDequeueMode(cons.DEQ_LOCKED);
          std::cout << "Reception du message..." << std::endl;
          Message m2 = cons.receive(Message::ANYDATA);
          AnyData any(conn);
          any = m2.getAnyData();
          if(!any.isNull())
               oracle::occi::TypeCode type = any.getType();
               if(type == OCCI_TYPECODE_VARCHAR2)
                    std::string msg = any.getAsString();
                    std::cout << "Message Reçu: ";
                    std::cout << msg << std::endl;
               else
                    std::cout << "Format du message invalide..." << std::endl;
               std::cout << "Fin du message... (Press a key)" << std::endl;
          else
               std::cout << "Message invalide..." << std::endl;
          System::String * theInput = System::Console::ReadLine();
     catch(SQLException ex)
          std::cout << "Exception: " << ex.getErrorCode() << " - " << ex.getMessage() << std::endl;
          System::String * tnput = System::Console::ReadLine();
}

The message from the queue will be removed when you do a commit after a successful dequeue call, depending upon your message retention settings.
After you have done this processing and successfully performed a commit, what is the output of the following query:
SQL> connect AQADMIN/password
SQL> select msg_state from aq$<your_queue_table_name_goes_here> ;?
If it is PROCESSED, check your queue retention settings.
Additionally, make sure that the init.ora parameter AQ_TM_PROCESSES is set to a NON-ZERO value for this to happen.

Removal of messages from persisted store

          Hi,
          If I'm using a JDBC store for my JMS server, are the messages removed from the
          DB when they are acknowledged? Are there config settings which play into this?
          Thanks,
          Bob


Elias Sinderson wrote:
          > Tom Barnes wrote:
          >
          >> An acknowledge deletes the associated
          >> messages from the store, whether
          >> it is a JDBC store or a file store. There is no config
          >> setting to turn off this behavior - and you are the first
          >> customer to ever ask if there was such a beast.
          >
          >
          > Actually, I looked for such a configuration but have been put in the
          > position of archiving JMS messages myself as this option is not provided
          > out of the box...
          Ah. Yes, I understand this use case. We are keeping it in mind
          for the future. The future solution may involve simply sending
          a duplicate message to another destination in the same
          transaction. The adminstrative interface might simply
          be something like an "ArchiveDestination" parameter on the
          original destination's configuration. Would that be sufficient?
          >
          > There are a number of reasons one may want to do wuch a thing, ranging
          > from record retention to simply allowing an end user to browse through
          > the set of delivered messages.
          I agree.
          > Personally, I believe that it is a
          > shortcoming of the JMS specification that it does not address this issue.
          Well pub/sub can address this issue. The drawback is that a durable
          subscriber is not the same as a queue - only one consumer can use
          it a time.
          >
          > The long and the short of it, in my case, is that I've now reimplemented
          > a good portion of the JMS specification on top of BEAs implementation.
          With WL, you can use standard JMS pub/sub to replicate messages
          and then use a messaging bridge to forward a subscription to a queue.
          This, of course, does not give great performance, but many applications
          are not sensitive to JMS performance.
          Another approach is to have senders send two messages, one to a
          pub/sub "monitoring" topic and one to the queue. Optionally
          using a transaction to ensure that it is atomic. Again, this is
          not a great performer.
          >
          >
          > Elias
          >
          Tom, BEA

Remove success message from VA01

Hola buenos días,
what i am looking for if it is possible to remove sucess message after calling transaction with call transaction abap statement, in the case i am asking for is to remove from status bar the message "Successfully sales order XXXXXX created", i do not see that posiibility in any of the options of this statement.
Correct answer will be apprecciate.
Saludos.

Did you try
Overwrite with your own blank message
Replace the CALL TRANSACTION with FM ABAP4_CALL_TRANSACTION starting another task and waiting til completion (jackhammer to crack a nut...)
Aaything else ?
Regards,
Raymond

Remove information message from CLM1 transaction

Hi,
In CLM1 transaction, when we go from 'assignment' tab to 'cost' tab, system displays a message 'The currency for the cost is adopted from the company code'.
How can i remove this message or can i change the message type to status message with modifying the standard program becuase information message interrupts the data entry process. Data entry user don't want to press enter every time.
Thanks,

Try to use.
mmpur_business_obj_id ls_po_item-id.
mmpur_remove_messages_by_id ls_po_item-id.

No way to remove deleted messages from POP server?

I've checked around, and this seems to be like a MAJOR shortcoming of Mail.
I have Mail set to leave mail on the server for one day. This way, if I boot on my Windows partition or check webmail, my recent messages are still there.
I primarily use my Mac for checking mail. I have many rules to sort my incoming (good) mail based on clients. I also get a lot of spam and unwanted mail, which mostly winds up in my junk email folder. So I delete it immediately.
My problem is that when I check the mail from other sources, such as webmail, I have to deal with the SAME junk messages all over again.
When I used to use Entourage and other clients, there was a preference to remove messages from server when they are trashed on the local mac. Mail does not seem to have this handy feature.
There is an option to delete mail moved from the inbox, but due to my sorting rules most of my good mail is removed from the inbox (and into client-specific folders). Also, some mail is move into junk incorrectly, and therefore moved back to my inbox by me. So this option will not work for me.
This is making it hard to use mail as part of a multi-machine/platform workflow. I like it otherwise, but it seems pretty lacking in this respect, and I am disappointed with it.
Any ideas?

What you're asking for isn't possible, not even with Entourage. You already set Mail to keep your messages for one day on the server after you retrieve them. But then you say you want it to delete them when you trash them on your Mac. Unless you are connected to your webmail server, how would you expect the server to magically discover that you've trashed something? Not even Entourage can do that; you had to have been connected to a mail server at all times in order for Entourage or any other mail client to do what you claim.
If you don't want to deal with seeing the same messages again, then you need to set Mail to delete the messages from the server as soon as it retrieves them.
Mulder

How to remove duplicate messages from Mail in Mavericks (POP)

Hello
I'm having some significant problems with Apple Mail, and despite having researched widely, I haven't been able to find a solution yet. Here is my tale of woe...
My set up is that I use Mail with 5 separate accounts, downloading all messages using POP. I keep all my mail so that I have a permanent record of all conversations, going back more than 10 years - this is about 250,000 emails. I'm running the latest version of Mavericks on a 2010 MBP. I have no intention of moving to IMAP - I need to keep a local archive of all my mail.
A few months ago I was having problems with Mail being very slow to load and search emails. I decided to rebuild the mailboxes, but afterwards discovered that thousands of messages in the inbox of one of my accounts (and some of the sub-folders) had disappeared. Once I realised I tried to go back to a recent Time Machine back up, but, for whatever reason, that part of the back up hadn't worked properly and I was unable to recover the previous status. Ileft it while I decided what to do, and had time to deal with it.
The last 2 years worth of emails on that account were still archived on gmail, so last week I decided to try redownloading the whole lot (something like 72,000 messages), and then uplanned to use one of the scripts I was aware of to remove the duplicates to the trash, and then remove any duplicates in the trash forever. That ought to mean I at least had an archive of the last two years of missing messages, even if I had no record of which ones had been flagged or replied to, etc.
The downloading took about 24 hours to complete, and I now have almost 70,000 messages in the inbox of that account. However, I hadn't figured on two things:
1. Mail 'hides' duplicate messages, meaning that all of the messages I've downloaded are showing as unread, and I can't differentiate the ones I already had in my Inbox, and the new downloads. When I click on those apparently unread messages I can see if they have been replied to or forwarded, etc, but there's no obvious way for me to remove the ones I have already dealt with to the trash, without going through them all manually, which is clearly impossible.
2. The scripts I'd found for removing duplicates don't work. Andreas Amann's Remove Duplicates script doesn't work under Mavericks, and he has abandoned the project. I've also tried the remove-duplicate-messages.scpt made by Jolly Roger (http://jollyroger.kicks-***.org/software/), and while it *sometimes* works on individual subfolders on my Mac (but as far as I can tell removes the duplicate in that folder, rather than the newly downloaded version), mostly it doesn't work at all - it creates a 'Remove Duplicate Messages' folder on my desktop, a log inside it and a folder for removed messages, but nothing appears in the duplicates folder.
So, I'm left in a position where I have 70,000 apparently unread messages in my Inbox, a massively bloated Mail library (which has pretty much doubled in size), a slow and unresponsive Mail program. I figure I have a number of options. Either I could abandon the last week's efforts and revert to the version of

Apologies, this was posted here in error. Please find updated post here: https://discussions.apple.com/message/27261965#27261965

How to remove a message from a Topic before it's consumed?

Hi All,
          I'm using Weblogic JMS Extensions to publish messages to a topic so
          that consumers do not receive them for at least 1 hour after
          publishing. My problem is that I need to be able to delete selected
          messages from the topic sometimes before the consumers see it. I've
          looked everywhere but can't see a simple way of achieving this. Have I
          missed the obvious? (I hope I have!).
          Many thanks in advance.


Essentially, the messages do not exist until that hour. There is
          currently no way to consume them.
          _sjz.
          "jim" <[email protected]> wrote in message
          news:[email protected]..
          > Hi All,
          >
          > I'm using Weblogic JMS Extensions to publish messages to a topic so
          > that consumers do not receive them for at least 1 hour after
          > publishing. My problem is that I need to be able to delete selected
          > messages from the topic sometimes before the consumers see it. I've
          > looked everywhere but can't see a simple way of achieving this. Have I
          > missed the obvious? (I hope I have!).
          >
          > Many thanks in advance.

Remove "Personalize Link" from context menu of iViews.

HI,
We have to disable / hide the "Personalize Link" from context menu of all iViews in the portal.
we do not want to go to Properties of individual iViews and change that.
Is their any global setting for that?
_vishal

Hi Vishal,
Are you talking about the Pesonalization option in iView tray or Webdynpro Personalization.
You don't need to open each iview to change a common property. You can use Multiple Property replacment to achieve this.
http://help.sap.com/saphelp_NW70EHP1/helpdata/en/0f/764b87dfb948fcb13fd7695e157892/content.htm
Regards
Prashant

Gnome 3 (fallback): Remove integrated messaging from status menu

Hi,
I would like to know how to remove the speech balloon and the messaging entries from my status menu, like this:
I don't use Empathy so it just looks annoying.
Thanks.

In the meantime I found the following:
- When I suspend with the power button, the screen is locked, but not when I use the status menu option
- This seems to be related to the screen setting 'Lock screen after'. I had it set to 1 minutes. When I change it to 'after the screen goes blank' the
problem doesn't seem to occur.
So, the way it looks now, it uses the same settings for delaying the locking the screen after the screensaver kicks in when locking the screen before suspend.
Which doesn't make much sense. And then the behaviour is still inconsistent with the power button suspend.

Remove face time from dock

How do I remove the Face Time icon from the dock. It keeps coming back when I restart.
The same thing happens with the App Store icon

I'm having the same issue, since a recent update. What gives?

Remove faces messages from context

Similar Messages

Maybe you are looking for