Remove filters from multiple clips

Is there any way of deleting effects filters from multiple clips, a reverse of the paste effects or paste attributes functions?

Brilliant - Sounds so logical when you know how.
You have saved me hours.
Thanks

Similar Messages

  • 'turning off' all filters from multiple clips at once???

    FCP 5.1.4
    Is there a way to collectively disactivate or turn off the filters on a group of clips all at once?
    I'm making a spot using the material from the film. The master film sequences have a lot of filters assigned ... but the sequences are no longer rendered. I want to pull diverse shots from the film without having to either render, or delete the filters. Once the clip is cut I'd like to be able to just turn the filters back on prior to exporting the new clip out.
    All ears,
    Ben

    Is there a way to collectively disactivate or turn off the filters on a group of clips all at once?
    As already mentioned, no.
    However, you can turn off filters for an entire sequence. Go to Sequence Settings (Command-0, that's zero) then the Render Control tab and uncheck the Filters checkbox. Of course, be sure to toggle it back on before you export.
    Not sure how well this translates to nested sequence though...

  • Essbase cannot union filters from multiple groups

    Hi All,
    I got a problem to provisioning on Shared Service.
    In some case, I need to grant multiple filters to a Essbase users, say user01.
    However, each user can associated one Essbase filter only.
    For better management, I create multiple groups with different filters and assign the user, user01, into the groups.
    For first two groups are working normally. However, Essbase cannot "union" all filters from multiple groups after the users join the third groups.
    However, I try to combine the three filter into a filter with three rows. It is working!!!
    It is because there are large number of users in external LDAP. It is unmanageable when combining multiple filters into a filters. Is there any way to solve this problem? or is there any better approach to do the security ?
    Thanks in advance!!!
    Regards,
    TKC

    Thanks for your reply.
    I have following structure in Essbase. I try to make it simple to understand.
    Dept (dimension)
    |_C00
    |_CTTL
    |_C01
    |_C02
    Project (dimension)
    |_GEN
    |_P01
    |_P02
    |_P03
    |_PI
    |_A
    |_P01 (shared member)
    |_B
    |_P02 (shared member)
    |_P03 (shared member)
    Group A with Filter F01
    Read - CTTL, IDESCENDENT(A)
    Group B with Filter F02
    Read - C01, P01, P02
    User joins A and B group.
    The end result of user is that
    he can access CTTL of P01 only
    he can access C01 of P01 and P02 only
    he cannot access C02 of any Project dimension
    he cannot access CTTL of P03
    However, I found that when I change to metaread. The result is going wrong.
    he can access C01 of P01, P02 and P03 only.
    It is because I need to block user to view members which he cannot access.
    I need "metaread" function.
    So somebody tell me how to achieve this? Thanks in advance.
    Edited by: user070322 on Jan 4, 2009 8:37 PM
    Edited by: user070322 on Jan 5, 2009 6:04 PM

  • Remove keywords from multiple pictures -  how to??

    REMOVING keywords from multiple images doesn't work here on Aperture 2.1.1. I select multiple pictures, remove a common keyword from the list in the Metadata inspector and... only the keyword from the picture which I selected last is being removed. All other pictures still have the keyword attached. Edit > Primary Only is not 'turned on'.
    What did I miss?

    Go to 'Window' > 'Show Keyword Controls'.
    In the text box, write the keyword that need to be removed from all selected images and press SHIFT + ENTER.
    If you use the Keyword Button Sets, you can also click on the keyword to be removed while holding down the SHIFT- key.
    Regards
    Paul K

  • Removing Contacts from Multiple Campaign Canvases

    Hi everyone,
    We're dealing with an issue on managing the flow of contacts in our automated campaigns.  We currently have 3 automated email drips that are based on the content that prospects engaged with to initially enter our database.  Then, contacts flow into the next canvas based on internal prioritization of the tracks.  However, we also run a new thematic campaign every quarter that has fresh content and pulls contacts out of our automated programs based on Title, Engagement, Industry, etc. 
    The problem is that every time we launch a new thematic campaign, we're forced to go back into our automated drip programs and add shared filters based on the new campaign's criteria before each email step.
    My idea is to have the newly segmented contacts enter a program that checks what other campaign canvases they are in and then remove them.  This would solve our issue of having contacts in multiple campaigns at the same instance, which would allow us to easily transfer newly engaged contacts into our quarterly thematic campaign.
    Am I thinking about this in the correct way?  Can you remove contacts from specific canvases in Program Builder?
    Thanks,
    Parker

    Need more info...what application/applications are you presently syncing contacts with? OS on your computer? Are you syncing contacts over the air? Are your contacts correct on your computer?

  • Applying video filters to multiple clips in Final Cut Express HD

    Is there a way to select multiple video clips and add a video filter to all of them? Example: we have a movie that was recorded in 2 different widescreen aspects ratios. Can I change them to the same aspect ratio easily?

    I can't say for FCE, you may want to post in that forum. But in FCP, the method for applying filter(s) to multiple clips is to apply the filter to one clip then make the needed adjustments on the filter(s) in that clip. Next, right-click on that clip and select "Copy" from the contextual menu. Next, select all of the other clips to which you want to apply the same filter(s) and settings. Right-click on one of them and choose "Paste Attributes" from the contextual menu. When the Attributes window opens, choose Filters, then click OK.
    To apply the same filter to several clips (without settings) at the same time, select the clips in the Timeline, then drag the filter(s) from the Browser to the clips.
    -DH

  • Removing keyword from multiple images at the same time

    None of the documented methods seem to work for me.
    1     Select all the images. Go to Metadata > Remove Keyword [my keyword] - the keyword is only removed from the image that is selected in the batch - i.e the one that has the yellow border round it to show it's the active image.
    2     Select all the images, enter [my keyword] in the Add Keyword field when Keyword Controls is visible and press Shift + Enter - does the same thing as 1 above (removes it from the active image only).
    3     Select all the images, Shift Click on the keyword that I have in my Keyword Controls in the Control Bar - does the same things as 1 above.
    So all these methods, which are supposed to work, do not work for me. The removal of the keyword is only applied to the image that has the yellow border showing it to be the currently active image in the selected batch - the remaining selected imaged still retain the keyword. I can remove it "one at a a time" but it would be great if I could find a solution as to why this isn't working.
    Any ideas?
    If it helps, I'm running Aperture 3.1.3 in OS X 10.6.8.
    thanks
    Alan

    Based on the frequency with which this trips up users, the Aperture team is going to have to add a much stronger visual indication that "Primary Only" is active.  Marching ants, anyone?  Or a pink selection marquee?
    At least in the Viewer when multiple Images are selected the thin white selection marquee is dropped when Primary Only is active.  There is no such change in the Browser.

  • Remove adjustment from multiple images?

    I have multiple images where I used Sharpen instead of Edge Sharpen. I know I can Lift & Stamp the Edge Sharpen adjustment to multiple images but I can't seem to find a way to remove the Sharpen adjustment from all of them first. Is there a way to accomplish this? Thanks

    I can add the other keyword using your techniqe, but how do I get rid of the wrong keyword without interfering with the other keywords I have already set for the images?
    Keywords are metadata, not adjustments.
    If you want to add or remove keywords to multiple images, without interfering with the keywords that are already set, I'd suggest to configurekeyword sets and to use the keyword controls:
    For example, after designing a keyword set"Himmel" (sky) I can add or remove one of the keywords for all selected images  by simply pressing a button in the keywords panel or using a key combination: for example ⌥6  to add the keyword "Halo" to all images, ⇧⌥6 to remove it from all currently selected images.
    But the question is, how to remove one adjustment from multiple images, and that seems to be behaving buggy in Aperture 3.4.1, at least on my system: If I try to add an adjustment to (or remove from)  multiple images, only the primary selection will be modified - and yes "Primary only is disabled ).
    For example: Trying to add "Sepia Tone" to four images: I see the same on two MBPs and on my iMac with Aperture 3.4.1.
    Regards
    Léonie

  • Removing keywords from multiple images when the keyword isn't in the list?

    So, I know that the method for removing a keyword from multiple images is to select the images, type the keyword in the inspector and press Shift-Return.
    However, that doesn't seem to work if the keyword I want to remove is not in the keyword database (i.e. it's not in the keyword HUD).
    For example, I deleted the iPhoto keyword group from the keyword HUD because I decided I didn't like that. I've got a bunch of photos that still have keywords like "Beach (iPhoto)". Typing "Beach" Shift-Return does nothing. Typing "Beach (iPhoto)" Shift-Return does nothing.
    Adding an iPhoto group back to the HUD and a child keyword of Beach and then Typing "Beach" Shift-Return works, but I can't believe that's how it's supposed to work.
    Is that the only way to do this? I've got a lot of those old iPhoto keywords to remove and that's going to be a major pain... there must be a better way.
    PowerMac Dual G5 2.0   Mac OS X (10.4.6)  

    I don't know if this will help you or not but it contains the roots of what you would need to script the removal of unwanted and unlisted keywords.
    -- script begins
    tell application "Aperture"
      -- set the target to the "Smart beetles" album at the top level of the library.
      tell album "Smart beetles" of folder ""
        -- get a list of the images in the album.
        set x to every image version
        -- move through the images one by one, deleting and creating the appropriate keywords
        repeat with i from 1 to x's length
          tell x's item i
            -- Note. if the keyword is top level, then the parents value is "".
            delete (every keyword whose name is "Australia" and parents is "Location")
            make new keyword with properties {name:"Sydney", parents:"Location"}
          end tell
        end repeat
      end tell
    end tell
    -- script ends

  • Can't remove keywords from multiple files

    I can't believe I can't get this working.
    Say I have 15 images with the same 10 keywords in every file. One of the keywords is "banana" and I want to remove it from all 15 files.
    I select all the 15 files. When I do that one becomes "active" (it gets lighter gray highlight than the 14 other images).
    I then go to the Keywording panel and manually remove "banana" from the list.
    When I look through files to see the change all but the one that was active STILL has the "banana" keyword applied.
    I have also tried selecting the 15 files and made the file without the banana keyword active and run "Sync Metadata" and removed "banana" from the "Keywords" field in the dialog box. Same thing happens. No change to the files that aren't active.
    What am I doing wrong?
    Thanks in advance,
    Unicorn

    Simple. Don't take photos of bananas!
    Actually, I believe you need to select the photos in the Grid, not in the filmstrip. Then, removing keywords should work as expected, and then when you try to remove the keyword, this keyword will be removed from all selected photos.

  • Remove filters from child movieClip

    hi,
    i am working with sprite in as3 and want to use the "glow filters" .The problem i'm facing is that i have used another sprite as it's child and the glow effect also appears on this child. Apart from glow filters the properties i'm using on parent and child are Blend properties, as i have to create a mask effect on parent child, BlendMode.Layer on parent sprite and BlendMode.Erase on child.
    please can anyone suggest me a way how to remove the filter(glow effect) from a child with the same senario i have to work with.
    thanks in advance.

    Brilliant - Sounds so logical when you know how.
    You have saved me hours.
    Thanks

  • Legend needs to display Prompt values / Remove filters from chart query

    Hi
    I have 2 questions for the same chart so I hope it's OK to add them in one post.
    Firstly I have created a chart & added three Select List filters which work fine, the query is below, problem is that when I change back to '-ALL-' I get no data, it has filtered out all records as no data matches the value of '-ALL-' does anyone know the code to get around this?
    My chart query;
    select null link, P_MONTH AS MONTH, SUM(CALLS) AS data
    from DATA.MAIN_DATA
    WHERE WAREHOUSE = :P1_WAREHOUSE
    AND ANS_UNANS = :P1_ANS_UNANS
    AND PRODUCT = :P1_PRODUCT
    GROUP BY P_MONTH
    As I will have several queries like the one above for different options on the same chart, I would like the Legend to show what the user has chosen each time the options are changed ie;
    Something like the bolded text in the query to display the chosen values in the legend;
    select null link, P_MONTH AS MONTH, SUM(CALLS) AS *'P1_WAREHOUSE' || 'P1_ANS_UNANS' || 'P1_PRODUCT'*
    from DATA.MAIN_DATA
    WHERE WAREHOUSE = :P1_WAREHOUSE
    AND ANS_UNANS = :P1_ANS_UNANS
    AND PRODUCT = :P1_PRODUCT
    GROUP BY P_MONTH
    Any ideas/suggests?

    Woof777 wrote:
    Any ideas/suggests?Try the APEX forum ;)

  • Applying multiple filters to multiple clips?

    Hi Guys
    I have about 100 clips in my Bin, is there a way to apply the same set of filters to all of them without dragging them into the timeline first?
    I tried dragging all of them into the timeline, then pasted filter attributes which works, then I did a long render which was fine, I then dragged them back into the Logging bin. The problem is when I drag them back to the timeline the need redering again.
    I basically want to apply the filters to all of my clips first while keeping them in the logging bin, then drag them to timeline as I need them.
    All ideas appreciated
    Cheers!

    I think you pretty much did what you can do in that respect.
    You could create a new timeline with the same settings, drag all your clips there, apply the filters, then drag copy clips as you need them to your original timeline. Seems like a strange way to do it though. Why not just cut your show without the filters then add the filters at the end?
    rh

  • Removing spaces from multiple files

    I'm using iWeb to make a photogallery, and when i publish to my server on yahoo, it says there is an error. Now i've had tons of errors and problems with yahoo, and i've come to the conclusion that this problem is because the file names have spaces, and yahoo's servers don't like spaces. So, i was wondering how one would go about removing spaces in file names of multiple files in a folder.

    Don't forget that this won't fix any links within the pages themselves.
    If you have a link to "some page.html" and the script renames the file 'some_page.html', you'll need to manually update the links in the page to the new file name before the link will work.

  • Remove user from multiple Group

    Hi All,
    Can any one help me on this . 
    we have around 100 different  SSLVPN AD security groups. Need a script or command to remove 790 users
    from all these groups.
    we have list of user in excel sheet we want to remove from group only. 
    Regards, Triyambak

    Hi,
    Just checking in to see if the suggestion was helpful. Please let us know if you would like further assistance.
    TechNet Subscriber Support
    If you are
    TechNet Subscription
    user and have any feedback on our support quality, please send your feedback
    here.
    Regards, Yan Li

Maybe you are looking for