Remove Fixing of cells while exiting the planning book

HI Gurus,
i am looking for a stnadard sap functionality to delete the fixing of cells done by the planners every month. is there any stnadrd macro function which i can use to delete the fixing of cells? the cells may be fixed at an aggregate level or at lowest level of the selection.
is there any standard macro which i can use?
Rgds, Sandeep

Hi Alexander,
that works. however i cannot make the key figure zero because some of my other KFs are getting disaggregated on that specifc KF.
is there any other way to delete the fixing of the cells before exiting the planning book or using a standard function in any macro?
Appreciate any inputs.
Rgds Sandeep

Similar Messages

Error while loading the planning book

Hi There,
I am getitng the below error while loading the data in planning book
"Error for COM routine using application program (return code 40,016)
Error reading data - Planning book cannot be processed further"
Ran /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_LCM_REORG but its not working , still getting the same error.
Could you please advise?
Thanks,
Krishna

Hi Krishna,
Looks like a key figure might be incorrectly created or there might be a problem in aggregation/disaggregation of key figures due to numerous number of CVCs.
Regards
JB

Error while updating the plan in Enterprise link

hi
i am getting an error while updating the plan which polls the JMS topic and inserts into the grid.
IMessageSourceReceiver->messageReceive: javax.jms.JMSSecurityException: JMS-232: An invalid user/password was specified for the JMS connection
 at oracle.jms.AQjmsDBConnMgr.checkForSecurityException(AQjmsDBConnMgr.java:916)
 at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:601)
 at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:238)
 at oracle.jms.AQjmsConnection.<init>(AQjmsConnection.java:183)
 at oracle.jms.AQjmsTopicConnectionFactory.createTopicConnection(AQjmsTopicConnectionFactory.java:209)
 at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:94)
 at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
 at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "Untitled, created 3/11/2009 3:56:28 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
the username and password that i have given are valid and i have given privileges that were mentioned on the technote to the user. can somebody help me out in resolving this as this is very critical for me right now
Thanks in advance

I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
Content Server Request Failed
Unable to update the content item information for 'HO000128'.
The content ID must be specified.
Please help to resolve.
Thanks in advance
Prasad

Compensation Planning - Error while doing the planning for Employee

Hi Friends,
We have implemented standard MSS Business package.
Line Mangers are using the Compensation Planning Iview and are facing errors while sending it for further approvals.
In the steps.
In the last step they get RFC_ERROR_SYSTEM_FAILURE.
A critical error has occurred. Processing of the service was terminated.
Access via NULL Object reference not possible.,error key : RFC_ERROR_SYSTEM_FAILURE.
Also to note that while doing the planning we get " No budget Data available"
Is budget data mandatory to complete planning. However in test systems we were able to run the complete cycle even without the budget data we were able to complete one cycle.
Kindly advise .
Thanks
Santosh

Hello..
This might point to an unhanded exception. There should be a backend dump (ST22) available and that would help in more analysis. You might need a ABAPer to look into the dump. You may paste the dump here for more analysis.

Photoshop element 8 opens a Crash report while exiting the application (win 7 64bit).

photoshop element 8 opens a Crash report while exiting the application (win 7 64bit). however the program itself is working as we can see the saved data and function it.
However no idea why it opens a crash report when the application exited properly. It's happening almost on 30 computers. re-install PS8 but still the same.
Appreciate your help

Yes please i cant find the source anywhere. I have tried in bunch of computer on all or win 7 64bit but couple of them opening the crash report. Having said that program is working with no issues. it just opens the window when i exit from the application
it happens only under EDIT not on Organise
I have tried uninstalled and re-installed still it doesnt work
Appreciate your help

Function module to read/write notes in the planning book

Hi All,
Can you guyz tell me the FMs to read / write NOTES in the planning book. Notes as in you can right click on a cell of PB and do display notes.
win full points for the answer.
Thanks - Chandan

Check FM /SAPAPO/MSDP_NOTE_WRITE and Use of APO BAPIs page in SCM Wiki.
Thanks,
Somnath

Error while accessing DP Planning Book through Portal. ( internet)

Dear SDN,
We are using a collaborative planning book from SCM 4.0 system, which is published as a service on the ITS (6.20 version). This ITS has been published so that we can access the system from the Broadband, simply like any other website.
The ITS URL is :
http://mmscmoptprd.mahindradms.com/scripts/wgate/webgui/!
The planning book service is
http://mmscmoptprd.mahindradms.com/scripts/wgate/clpsdp/!
When we try through our LAN, we can access it.
When entering through broadband, we can see the first page of planning book , i.e. where selection of planning book and planning view is to be made.
Once a selection is made from the dropdown, and when "CHOOSE" button is clicked (for that matter the rectangular box containing the selection criteria and also the Exit button ) we get a message as :
Problems with this Web page might prevent it from being displayed properly or functioning properly.
Line : 714
Char : 1
Error : Object Expected
Code : 0
URL : http://mmscmoptprd.mahindradms.com/scripts/wgate/clpsdp/!?client=100&language=en&accessibility=0&DesignBaseUrl=%3A%2f%2fmdwds01.mahindradms.com%3A80%2firj%2fportalapps%2Fcom.sap.portal.design.portaldesigndata%2Fthemes%2Fits&~design=mm_dms_defaultTheme
and it remains on the same page.
The IView used is of the type :
1. URL IView ... CLPSDP service url is given as parameter URL.
2. IAC IView : web-service is "clpsdp" and "ITS url" is given.
We intend to give either one which should work fine.
I am not able to figure out as due to what reason should this problem arise, either the UI attributes or the publishing or something else.
Request you to please help.
Regards,
chandani
ep consultant
www.bcone.com

Hello,
SInce this is an Portal Error, for quick and efficient replies past it in SAP EP forum.
Thank and regards,
Abhishek

Change the period labelling in the planning book

Hi I want to change the period labelling in the planning book. currently it is showing default I want to customize it to January, february, etc. I know there is a user exit APODM006. but I want to know the process to do it. thank you

Hi friends
Is there a way to achieve this? What can be the approach to solve the requirement?
Hi Pratik,
How to go with the requirement? Can this be achieved?
Regards,
Raju.
Message was edited by:
Narayana Raju Sampathirao

Upload data from Excel to the Planning Book

We are on APO 5.1. We have APO DP at the moment. I wanted to test upload of data from Excel to the planning book. I have tried several times. I have been unable to see any changed data in the planning. I do not get ANY errors during the upload. But I cannot see any changes that I made in the excel in the planning book. Please let me know what I am doing wrong. These are the step that I follow.
1. Go to planning book.
2. Short list only one key figure e.g Customer Forecast.
3. Go into Details All mode.
4. Download the file using the "Prepare File for Upload" option.
5. Open the saved Excel.
6. Change the values in the excel , save and close.
7. Upload the excel into the planning book using the upload file option.
I do not get any errors during all these steps. However, when I check to see if the values have been updated, the changes made in the excel are not updated in the planning book.

Hello,
Instead of selecting one key figure in data view, please select all key figures of the planning book and then try all the steps which you have carried out.
please revert after you carry out this.
Regards,
Prafulla

Days supply is not populating in the planning book

Hi Experts,
When I select multiple products in the planning book, the value is papulating as total but if I drilled down to individual product then days supply(Key figure) values are not populating in the planning book.
Please let me know if any idea.
Regards,
Hrishi

From what you mention it looks like you do not use the standard SNP Planning Book. Was the macro inactive so that you had to regenerate?
When you move a macro from workbench to level change it should not require to be regerated.
Please check if following macros are active (green) under level change in sequence
Determine Workdays
Layout Attributes
Drill (Level)
Else compare the macros and sequence in the standard SNP Planning Book with the Planning Book you are using.
The Day's Supply (All: Day's Supply) and Determine workdays macros are essential for populating the day's supply keyfigure.
Thanks,
Somnath

Why doesn't apple have a file of events that ties to the iCal program and the Address book file? By having that relationship it seems that you could call up all of the events tied to a customer while in the address book or likewise call up all of the even

Why doesn't apple have a file of events that ties to the iCal program and the Address book file? By having that relationship it seems that you could call up all of the events tied to a customer while in the address book or likewise call up all of the events tied to a contact that was in the iCal program as a scheduled meeting. Even in the to do's you could easily look back at the events tied to an individual so as to bring yourself up to speed with what you were doing with the individual in mind.

I definitely understand your concern and I apologize for all the frustration. Verizon Wireless has a strong customer commitment to delivering the best from our service and staff. I am disappointed to hear the service you received did not reflect this commitment.
I definitely want to help get to the bottom of this and further assist you. Please reply to my direct message so I can access your account and further assist. I am sure we can get this resolved.
JohnB_VZW
Follow us on Twitter @VZWSupport

User is unable to view the selection window in the planning book

Hi Friends,
I am able to view the selection window in the planning book.
User is unable to view the selection window in the planning book.
Is it authorization issue or any settings issue?
Please explain me in detail.
With regards,
Balu

HI Balu
Can you check if ''Selection profile" is checked in the ''view selection" option in the top left of the planning book for the user?
you can choose the hide/show the Selection profile tab, planning book/data view and macros tab using that function.
Check if this helps.
Rgds, Sandeep

How to deactivate the Smoothing Factor button in the planning book.

How can we restrict users to Activate smoothing and also to change smoothing factor?
Piyush Nandan.

Hi Piyush ,
To deactivate the 'Activate Smoothing' and 'Change smoothing Factor' button form planning book you need to
- Switch to Graphic mode in Planning book
- Goto design screen by using 'Design' button near graphic button
- From top menu 'Settings' dropdown select Configure toolbar or 'Switch Icons On/Off
Here you can restrict the icons appearing in the planning books.
Please confirm if this helps by rewarding suitable points...
thanks ,
Digambar

Start with dates from the past in the planning book

I want to maintain some figures from the last 14 days in the past.
And I want the planning book to show these 14 days, when I open the planning book.
(I do not want to scroll back).
In my Data view i have to define a Time Bucket profile for the future. (system demand)
This profile I has defined with one day.
The Time Bucket profile for the past are 21 days.
When I start the planning book with the view, I see only one column with todays date.
I want to see the past 14 days, and therefore I have to scroll back.
Is it possible to start with the last 14 days?
- By setting the Period information in the Data view tab?
- By other settings?
- By macro?

Hi Per,
You need to go for a developing an ABAP report. The development calls for updating the planning start date in the data view design mode.
You can use function modules /SAPAPO/MSDP_PB_READ_DVIEW and /SAPAPO/MSDP_PB_SAVE_DVIEW_TAB.
So the logic could be as follows:
1. First develop a FM which will determine the planning start date as per your requirements. This has to be with respect to the system date. So this Function module should in effect subtract 14 days from system date and store in a date field.
2. Using the FM /SAPAPO/MSDP_PB_READ_DVIEW, this date can be updated in the data view / PLanning start date field.
3. Using FM /SAPAPO/MSDP_PB_SAVE_DVIEW_TAB, you can save and generate the data view.
After developing the program you need to schedule this in background so that the planning start date is calculated and stored automatically.
You need to take care of one thing though. In case there are any macros developed in the data view/macro book, the start dates for macro execution will be changed as well. You need to tweak those as per your requirements.
Hope this helps.
Regards,
Ashutosh

DP - Sales and Demand Forecast values in the Planning book were increased.

Dear DP Experts,
The Sales and Demand Forecast values in the Planning book were increased. Is there a way to tract who user could have made the changes? Can we view the last change like in the document flows?
Thanks,
Glason

hi Glason
if the values have been changed by the user community, I am not sure if there is a way to find out. However if there is technical flaw in data processing, you can check for the steps as posted in the above post.
We faced a similar issue in our project. We were not able to trace the user ids under which the values were changed. However since we retain the 15 days of back up, we were able to check that the values were changed on a certain date but not the user ids. but we were still able to restore the original values.
As an additional step, we also developed macros to store (in the form of alerts) the exisitng value and the updated value incase the there was a manual change in the Sales forecast and other editable key figures. This ensured that there was a check if there was a manul change. we also ensured that these macros were not executed during the background jobs.
SAP also provides a standard SAP APO Change Monitor add-on which can be used to track chnages to the key figures. Please refer to note 1308968 for further information on the add on.
let me know if this helps.
Rgds, Sandeep

Remove Fixing of cells while exiting the planning book

Similar Messages

Maybe you are looking for