Remove from production

hallo guys
i hv a very critical situation so anyone know how to solve that issue plzzz reply 2 me so fast
my problem is i create a user on FCSrvr with minimum of privileges ....only to see NOT to create,delete,copy,paste,duplicate,export...just make him review
but when that user press on any production folder and press on any item inside that production and press right click on it....it show a list that list contain ( REMOVE FROM PRODUCTION )
so how can i deemed that ( REMOVE FROM PRODUCTION ) to make it unseen
so if any one know plzzzzz reply to me fast
thank u again

That is a current limitation with Final Cut Server (FCSvr 1.1.1).
You can't currently have Production specific permissions.
Send a request to feeback.apple.com
Hope this helps.
Nicholas Stokes
XPlatform Consulting

Similar Messages

Product Allocation: Removing a Material from Product Allocation

Hey folks!
I am new to the forums, so hopefully some of you sharks will bite on this one. I work for a consumer products company and we're having issues with product allocations.
We have had a material on product allocation for the past 3 months. We used a allocation rule that is modeled off of the S140 rule on the basic data of the material view. However, our production has now ramped up sufficiently to produce this product and provide normally.
1) How do we remove the material from product allocation?
We deleted the rule from the basic data view, but is there anything else we need to do? There are many remaining open sales orders that get the error "No Feature Combination exists for this selection error". I have ran rescheduling (V_V2) and have also ran the SDRQCR21 to rebuild requirements, but it still remains with this error.
2) Is there something we have to do with the infostructures? Something we have to do in MC64 or MC94?
3) Do we need to go through each sales order and delete the line item and replace the line item to get the normal ATP to function (we would rather not do this as we have EDI information connected to each line item)
4) Is there another report out there I need to run that I just do not know about?
Any help would be great. We are on ECC5.0 Hotpack 15. I will reward points if I can figure out how to.

Use MC94 to remove the quantities allocated.
Use MC62 to remove the planning hierarchy.
I believe that in your situation MC94 will work.

BAPI to remove location-products from Active Model

Hi All,
Can you tell me the BAPI to remove location-products from active model in MASS? Thanks.
Best Regards,
chandan

Hi Chandan,
You can use the BAPI for deletion of product-location combination from planning version.
BAPI_PRDSRVAPS_DELMULTI
Regards,
Saurabh

Production order removal from MD04

Hi All,
I have set the deletion flag in the production order.Itis link to the Sales order which is open.Both the sales order and production order is showing in the MD04.How to remove the Production order only from MD04.
Please help me.
Thanks
Srini

Dear Srini,
I would suggest two ways to this:
1. Mark technically complete for the production order
Goto CO02, after entering the prod. order
-> Functions -> restrict processing -> technically complete
Save
2. Set rejection code in the sales order
Goto VA02, in the item overview, double your item
In Tab 'Status', enter the 'Reason for rejection'
Feedback whether it helps or not.
Ken

Unable to remove additional attribute/ category from product

I am using SAP CRM 4.0 and in order to add additional attributes on a product created a attribute 'test_attribute' created a set type ' test_attribute_set' and attached the attribute to it. Then I created a hierirch and and inside it created a category 'test_category' which was assigned 'test_attribute_set'. This test category was then attached to my two products. All is fine till here, but now when I try to detach this catagory from product it does not give an option to select the category and remove from the general tab of product. Can some one please help me on this?

I am using SAP CRM 4.0 and in order to add additional attributes on a product created a attribute 'test_attribute' created a set type ' test_attribute_set' and attached the attribute to it. Then I created a hierirch and and inside it created a category 'test_category' which was assigned 'test_attribute_set'. This test category was then attached to my two products. All is fine till here, but now when I try to detach this catagory from product it does not give an option to select the category and remove from the general tab of product. Can some one please help me on this?

Why does apple allow apps in the App Store hijack your Internet when certain websites? Why doesn't apple remove their products from the App Store?.

Why does apple allow apps in the App Store hijack your Internet when certain websites? Why doesn't apple remove their products from the App Store?.

Apple saw it as their responsibility since the redirection took me to the App Store. They assisted me in stopping the redirection which is occurring on many peoples iPhones. It's a have java script problem that adking is using to get you to buy their games. The websites work normal and then all of the sudden the website is taken over by adking.com. You can no longer use the website as it immediately takes you to the App Store without ever showing a popup to cancel the redirection. They were very helpful fixing the problem should others experiencing this specifically with adking.com.
No need to get defensive. I'm not the only one experiencing the problem Apple said.

Need old product removed from My Products

When I log in to my account, under:
My Adobe > My products and services > My products
There is a CS3 software suite that I no longer use, nor do I own it. How can I have that product removed from my account?
Thank you,
Audra

Contact support directly by phone or web chat.
Mylenium

SL500, Product recovery function has been removed from this sytem

I upgraded my SL500 from Vista to windows 7 OS several years ago and lately the OS has been acting weird (freezing, very slow at times) so I am thinking something is corrupted somewhere and want to restore it back to the manufacturers state. However, when I try to do this through rescue and recovery, it tells me that the recovery function has been removed from the system. I'm assuming that when I upgraded from Vista that R&R was no longer compatible so I installed version 4.5. My laptop did not come with backup OS disks and was told that this was the way to restore the system back to the factory state. How do I do this if I'm getting this message?

http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62978
try this. If this don't work then you would to reinstall the OS using the T43 recovery media disk set.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

I had all my software, including my 'Adobe Creative Suite 4 Design Premium' removed from my MacPro (OSX 10.10.2) by a Computer technician after I had inadvertently installed some malware. Now I can't reinstall my CS4 because the installer software wants m

I had all my software, including my ‘Adobe Creative Suite 4 Design Premium’ removed from my MacPro (OSX 10.10.2) by a Computer technician after I had inadvertently installed some malware.
Now I can’t reinstall my CS4 because the installer software wants me to identify the product from which I am upgrading, but mine isn’t on the list. The old product from which I am upgrading is called ‘Adobe Design Collection’. Furthermore, it has 4 serial numbers (one each for Photoshop, InDesign, Acrobat and Illustrator), not just one, as the installer requires.
I know this can be done, as I have had it working for a long time. Am I doing something wrong now?

Contact support be web chat and have them generate a working temporary serial/ challenge code for the install.
Mylenium

How Do I Get An Uploaded Song Removed From The iTunes Store That I Own?

I own a production company and I own a song that has been uploaded to iTunes Store for sale. I am having problems with the people that I have trusted in properly administering the publishing aspects of the song. How do i get the song removed from the iTunes Store so i can get it re-released under another publishing group who have shown they can properly administer the publishing/copyrighting/monetary aspects of my song?

DUPDAWG wrote:
ps I used to be able to create my own "Ringtones" via iTunes and songs I had in iTunes, but they took that away I guess.
No they didn't. You can still create your own ringtone using computer iTunes.
Here are the steps:
Select a title (.mp3 or .m4a) in your iTunes Library
2. Do File > Get Info on selected title (Windows do Edit > Get Info)
3. In the dialog choose Options tab
4. Set Start Time and End Time (no more than 35 secs otherwise won't work)
5. Close dialog.
6. Now control click the title (right click) and choose Create AAC Version
7. When it is done, drag the newly create title to the desktop.
8. Delete the newly create title in iTunes.
9. Rename the title on your desktop from ringtone.m4a to ringtone.m4r
10. Drag and drop it into iTunes
Now you have a ringtone.
Make sure it is selected in iTunes's Tones tab for syncing with your iPhone.

Database refresh from production to test -how to clean existing test env

All,
My environment is
Both Production and Test databases are in two node RAC environment
Oracle version - 10.2.0.4.0
OS - RHEL5
Production database size 80GB
We need to refresh the test environment from production database. Complete objects, data etc should be refreshed.
We have a datapump export from production environment. With this export dump from production environment, I need to import into test environment.
So far, I have imported with this kind of dump to the fresh database only.
Now, we have already objects, data sitting in the test environment. How to clean the existing test environment and refresh the production datapump export dump.
I thought of dropping all the tablespaces in test (other than system,sysaux, undo and temp). But not able to drop few tablespaces, it is telling that index is available in other tablespaces, dependency errors etc.
Which is the best method to clean the existing test database. Management is not interested in dropping the test database and recreating it.

I understand that you are Newbie , let give me simple steps.
Follow the steps on testing envi.
1. Drop only Application users that you want to refresh from Prod(Do NOT drop users system,sysaux.. or tablespaces)
2. Create the users that you dropped.
3. using import or import data pump import the data.
In case you want to import user"A" data to "B" use REMAP_SCHEMA option.
See the below link for data pump export/import with examples.
http://oracleracexpert.blogspot.com/2009/08/oracle-data-pump-exportimport.html
Hope this helps.
Regards,
Satishbabu Gunukula
http://oracleracexpert.blogspot.com
Click here for [How to add and remove OCR|http://oracleracexpert.blogspot.com/2009/09/how-to-add-and-remove-ocr-oracle.html]
Click here in [ Making decisions and migrating your databases |http://oracleracexpert.blogspot.com/2009/08/download-sql-developer-migration.html]
Click here to lean [ Static parameters change in SPFILE and PFILE|http://oracleracexpert.blogspot.com/2009/09/how-to-change-static-parameters-in.html]
Edited by: Satishbabu Gunukula on Sep 14, 2009 5:09 PM
Edited by: Satishbabu Gunukula on Sep 18, 2009 10:35 AM

What could cause a server to be removed from the farm other than running PSConfig and removing it?

Hi,
We had a strange issue today. One of our two production WFE servers in our SP2010 farm had become disconnected from the farm. I noticed it because I had created a new site collection within an existing web site last week but it was only available on
one WFE. I didn't think for one second that the server had already been removed from the farm but I had decided I would remove it and re-add it to see if that would fix the issue. When I ran PSConfig to remove it I found the following:
I checked the log:
Entering function WelcomeForm.TryToLoadTheFarm
Found a task by the name of initialize in the task collection
Entering function Farm.Farm
Leaving function Farm.Farm
Entering function Farm.TryIsJoinedToFarm
Entering function get CommandCollection.this[string key]
Entering function CommandCollectionBase.Get
Found value in collection for key initialize
Leaving function CommandCollectionBase.Get
Found command initialize in collection
Leaving function get CommandCollection.this[string key]
Entering function Command.this[string key]
Entering function CommandCollectionBase.Get
Found value in collection for key B2B_UPGRADE
Leaving function CommandCollectionBase.Get
Found parameter B2B_UPGRADE in collection
Leaving function Command.this[string key]
Clearing cached Farm objects to reload
Entering function Farm.Clear
Entering function CentralAdminServiceInstance.Reset
Leaving function CentralAdminServiceInstance.Reset
Leaving function Farm.Clear
My cached Farm object is null, so will load it
Calling SPFarm.Local and SPServer.Local to get the local farm objects
SPFarm.Local returned a local farm
SPFarm.Local retuned a farm, but SPServer.Local returned null. Failed to connect to the farm, except in B2B Upgrade.
Entering function Farm.Clear
Entering function CentralAdminServiceInstance.Reset
Leaving function CentralAdminServiceInstance.Reset
Leaving function Farm.Clear
Leaving function Farm.TryIsJoinedToFarm
Failed to successfully try to see if this server is joined to the server farm.
The operation will continue so that you can force a disconnect from a server farm that cannot be contacted
Resource id to be retrieved is FarmIsJoinedFailureWhileUsingUICanOnlyDisconnect for language English (United States)
Resource retrieved id FarmIsJoinedFailureWhileUsingUICanOnlyDisconnect is Failed to detect if this server is joined to a server farm.
Possible reasons for this failure could be that you no longer have the appropriate permissions to the server farm, the database server hosting the server farm is unresponsive,
the configuration database is inaccessible or this server has been removed from the server farm.
To diagnose this problem further, review the extended error information located at {0}.
If this problem persists, choose to disconnect from the server farm. After disconnecting, run the wizard again to create or connect to an existing server farm.
Anyone know what this line means?
SPFarm.Local retuned a farm, but SPServer.Local returned null. Failed to connect to the farm, except in B2B Upgrade.
Permissions were unchanged from before and I was running PSConfig elevated with the SharePoint admin account. So with this information along with the fact that the new site collection was not available on this server I concluded that it had been removed
somehow.
Has anyone seen this happen before? As it is a production server I'm going to have to explain this to the customer.
Thanks!

Hi Fridge,
In Sharepoint central admin,Manage servers in Farm,Does this show this WFE Server still?
Check if any ports(32843,32844) has been closed on the WFE server which got disconnected as these ports are used to communicate between WFE servers
Check if this is helpful
http://blogs.msdn.com/b/uksharepoint/archive/2013/01/21/sharepoint-2013-ports-proxies-and-protocols-an-overview-of-farm-communications.aspx

REMOVE ORACLE PRODUCT IN NT

제품 : ORACLE SERVER
작성날짜 : 1997-06-16
REMOVE ORACLE PRODUCT IN NT
===========================
1. oracle 에 관련된 services 를 stop 한다.
- open the Control Panel in the Main program group
- open the "Services" icon
- scroll down and look for any Oracle related services, such as
OracleAgent, OracleWWWListener8888, etc
- under the "Status" column, if any of these services show "Started"
select the service and click "Stop"
- repeat until all Oracle services are shut down
2. registry 정보를 지운다.
- from the Program Manager pull down the "File" menu and select "Run"
- type REGEDT32 and click OK
- select the HKEY_LOCAL_MACHINE window
- open the SOFTWARE folder
- select the ORACLE folder and press the delete key to remove the
Oracle registry entries
- confirm the delete operation in the yes/no dialog box - select YES
- close the SOFTWARE folder
- now open the SYSTEM folder
- open the CurrentControlSet folder
- open the Services folder
- scroll down and select any Oracle related entries
- delete the entries one at a time, go slowly so the system can
refresh the display before you delete the next key
- close the registry editor
3. oracle 관련 icon 과 menu 삭제
- in the Program Manager close any Oracle program groups to make them
icons
- select an Oracle group with a single click, the pop-up menu will
appear
- click again on the icon, do not click on the menu, the menu will
disappear
- press the delete key, and confirm deletion of the program group
- repeat for all Oracle program groups
- open the "Startup" program group if there is one, and remove any
Oracle items in that group
4. computer 를 재기동한다.
- pay attention to any errors that would indicate that there are
still registry entries or that something is attempting to load
5. Oracle Home directories 를 삭제
- use File Manager to delete all the Oracle software
이렇게 하면 oracle 관련 system 이 삭제가 된 상태이며 다시 제품을
install 하면 됩니다.

I just went through this with Oracle support. The only solution is to replace the logo.gif file with 1X1.gif (copy 1x1.gif to logo.gif). That gets rid of the Oracle logo, but not the box, nor the copyright statement.
According to Oracle support this is by default and cannot be modified. They claim to be concidering this for a future release.
Let me ask, Are you running this as a portlet within a page? or as part of a dynamic page or calling it alone?
If you are calling it alone, run it as a full page, and choose a template that has minimal formatiing. I think it is called portal_template_example1 ??
If you are running it a portlet in a page, edit the page region and uncheck show portlet headers.
If you are running it as part of a daynamic page then you can run it by using the run as a stored procedure example (manage, show)
but nothing else io the dynamic page will show.
If you you have more questions, e-mail me.

Switch 2 was removed from stack unexpectedly and again joined stack

Hello,
we have 2 switches in stack, last night switch 2 was removed from stack and got rebooted and again it got back in stack.
Switch -2 entered into the provisioned mode for certain span of time. snap shot is attached .
Apr 9 02:36:25.266 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state DOWN
Apr 9 02:36:25.837 IST: %STACKMGR-4-SWITCH_REMOVED: Switch 2 has been REMOVED from the stack
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to down
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/3, changed state to down
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/4, changed state to down
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/3, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/4, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to down
Apr 9 02:48:37.111 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state UP
Apr 9 02:49:08.048 IST: %STACKMGR-4-SWITCH_ADDED: Switch 2 has been ADDED to the stack
Apr 9 02:49:20.170 IST: %STACKMGR-5-SWITCH_READY: Switch 2 is READY
Apr 9 02:49:20.170 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 2 has changed to state DOWN
Apr 9 02:49:20.170 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 2 has changed to state UP
*Mar 1 00:01:02.738: %STACKMGR-4-SWITCH_ADDED: Switch 1 has been ADDED to the stack (Switch-2)
*Mar 1 00:01:02.738: %STACKMGR-4-SWITCH_ADDED: Switch 2 has been ADDED to the stack (Switch-2)
*Mar 1 00:01:07.024: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan (Switch-2)
*Apr 9 02:49:18.979 IST: %SYS-6-CLOCKUPDATE: System clock has been updated from 21:19:18 UTC Wed Apr 8 2015 to 02:49:18 IST Thu Apr 9 2015, configured from console by console. (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:19.382 IST: %SYS-5-CONFIG_I: Configured from memory by console (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:19.482 IST: %STACKMGR-5-SWITCH_READY: Switch 1 is READY (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:19.818 IST: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.053 IST: %STACKMGR-5-SWITCH_READY: Switch 2 is READY (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.178 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback99, changed state to up (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.178 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback999, changed state to up (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.321 IST: %SYS-5-RESTART: System restarted -- (Cochin-GMSC-SWTCH-2)
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2) (Cochin-GMSC-SWTCH-2)
Copyright (c) 1986-2008 by Cisco Systems, Inc. (Cochin-GMSC-SWTCH-2)
Compiled Thu 01-May-08 15:00 by antonino (Cochin-GMSC-SWTCH-2)
Apr 9 02:49:24.222 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to up
Apr 9 02:49:24.264 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/3, changed state to up
Apr 9 02:49:24.281 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/4, changed state to up
Apr 9 02:49:24.314 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to up
Apr 9 02:49:25.228 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to up
Apr 9 02:49:25.270 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/3, changed state to up
Apr 9 02:49:25.287 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/4, changed state to up
Apr 9 02:49:25.321 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to up
Apr 9 02:49:39.959 IST: %PLATFORM-6-MODULE_INSERTED: TwinGig Converter module inserted in slot 1 in Switch 2 (Cochin-GMSC-SWTCH-2)
Apr 9 02:49:42.106 IST: %PLATFORM-6-MODULE_INSERTED: TwinGig Converter module inserted in slot 2 in Switch 2 (Cochin-GMSC-SWTCH-2)
Switch 02
Switch Uptime : 5 hours, 38 minutes
Base ethernet MAC Address : 00:23:04:19:9A:00
Motherboard assembly number : 73-10313-11
Motherboard serial number : FDO12320AH4
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750E-24TD-SD
Daughterboard assembly number : 800-28590-01
Daughterboard serial number : FDO123305QU
System serial number : FDO1234V07K
Top assembly part number : 800-28443-01
Top assembly revision number : A0
Version ID : V01
CLEI Code Number : COMVC00ARA
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 15:00 by antonino
Image text-base: 0x00003000, data-base: 0x02000000
Please help to find reason behind this unexpected reboot.
Regards
Jatinder

what is use of session 2 command ,is this service impacting command
sh ver
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 15:00 by antonino
Image text-base: 0x00003000, data-base: 0x02000000
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750E-HBOOT-M) Version 12.2(35r)SE1, RELEASE SOFTWARE (fc2)
******* uptime is 11 weeks, 2 days, 8 hours, 40 minutes
System returned to ROM by power-on
System restarted at 01:41:48 IST Wed Jan 21 2015
System image file is "flash:c3750e-universalk9-mz.122-44.SE2/c3750e-universalk9-mz.122-44.SE2.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco WS-C3750E-24TD (PowerPC405) processor (revision A0) with 0K/16376K bytes of memory.
Processor board ID FDO1234V07J
Last reset from power-on
3 Virtual Ethernet interfaces
1 FastEthernet interface
56 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:22:BE:95:35:80
Motherboard assembly number : 73-10313-11
Motherboard serial number : FDO12340H8F
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750E-24TD-SD
Daughterboard assembly number : 800-28590-01
Daughterboard serial number : FDO123305LA
System serial number : FDO1234V07J
Top Assembly Part Number : 800-28443-01
Top Assembly Revision Number : A0
Version ID : V01
CLEI Code Number : COMVC00ARA
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
* 1 30 WS-C3750E-24TD 12.2(44)SE2 C3750E-UNIVERSALK9-M
2 30 WS-C3750E-24TD 12.2(44)SE2 C3750E-UNIVERSALK9-M
Switch 02
Switch Uptime : 1 day, 7 hours, 35 minutes
Base ethernet MAC Address : 00:23:04:19:9A:00
Motherboard assembly number : 73-10313-11
Motherboard serial number : FDO12320AH4
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750E-24TD-SD
Daughterboard assembly number : 800-28590-01
Daughterboard serial number : FDO123305QU
System serial number : FDO1234V07K
Top assembly part number : 800-28443-01
Top assembly revision number : A0
Version ID : V01
CLEI Code Number : COMVC00ARA
License Level : ipbase
License Type : Permanent
Next reboot licensing Level : ipbase
Configuration register is 0xF

Why has PocketMoney by Catamount (which I purchased in 2011) been removed from app store?

Why has PocketMoney by Catamount (which I purchased in 2011) been removed from app store?

Catamount software was a one-person company, run by Hardy Marcia. Sadly, he died at a young age in 2013, here is his obituary: http://www.legacy.com/obituaries/concordmonitor/obituary.aspx?n=harland-arthur-m acia-hardy&pid=165055870. He was a great app developer.
I have extensively searched for and tried practically every money management app out there to replace it. I had major problems with PocketMoney & iOS 8, but subsequent updates to 8 have corrected that. I only experience a crash when switching accounts, which I have come to expect. I even bought a high-end version of Quicken only to abandon it, and its companion iOS app. Quicken does things its own way and you waste too much time trying to get data imported and usable the way you want it.
I still use PocketMoney every day, but also use MoneyWiz by Silerwiz. I was a beta tester for their upcoming V2. There are still a lot of things that only PocketMoney has, like classes and posting future transactions in gray so you will see your cash flow (mine is set for 61 days out), and syncing between devices with images included. However, the company behind MoneyWiz takes their product very seriously and I think it will be around for a long time. Eventually an iOS update will make PocketMoney unusable. If you can get your data out of PocketMoney, MoneyWiz has instructions for importing the data and it comes over very well.
I keep hoping a software company will see the value of PocketMoney, buy it and bring it back. My guess is that Catamount is technically owned by his estate, and would be of value to his family to sell.
The best advice is to backup frequently with the iTunes desktop software. I trust a wired connection more than than WiFi.

Remove from production

Similar Messages

Maybe you are looking for