Remove hidden space

How to remove or unlock hidden space on your SSD?

If it was possible that would be a very foolish thing to do. That extra space, the unallocated space on all SSD units, is there for a reason. That space is call Over Provisioning. In case a part of the normally allocated space fails the SSD will auto use that extra space so the drive won't give errors or fail. Just use the drive as it is designed.

Similar Messages

Export to text removes trailing spaces in XI R2

I've found an article that talks about the problem of the export to text removing trailing spaces, but the article mentions that this is fixed in Crystal Reports XI with a newer version of u2ftext.dll to version 11.0.0.941.
[1218375 - Trailing spaces ignored when exporting to Text format|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333333373335%7D.do]
I'm using Crystal Reports XI R2 and my u2ftext.dll version is already 11.5.11.1470.
I'm I missing something or is there another solution to the issue in XI R2?
Thanks,
Jeff

2 Years, multiple people are asking this question.......Does anyone in support have a response for keeping the trailing spaces intact during export?

How can we remove the space after changing look and feel to generic

Hi
I want to remove the space which left blank after changing look and feel to generic in formsweb.cfg file.
Can anybody help me to remove this blank space.

Hi,
can you be more specific on teh space you mean?
Frank

Removing extra spaces from a long document

Hello
I have seen a number of find/change and GREP formulas to do similar things. I have NO scripting or coding experience and have labored to understand GREP.
So I am a little afraid to use it as I don't know what all the modifiers refer to (I do have a printout of some neat GREP cheatsheets like Mike Witherell's that I can absorb until I obtain a good reference )
I need something I can copy and paste into either find/change or GREP dialog that will do the following in less than 12 steps (hopefully) without doing something catastrophic like removing all of my paragraph marks (which I almost did using someones GREP expression)
No spaces before any comma, period, exclamation mark, question mark, colon, semicolon
One space only after any of those
One Space before any opening parenthesis and one space after the closing parenthesis
No space after the opening parenthesis or before the closing parenthesis
Remove any double or extra spaces ( en, em etc.)
Remove any commas before parentheses
Remove any spaces after a paragraph mark
I think that's it
I did find this one recently (Maybe Jongware?)
[~m~>~f~|~S~s<~/~,~3~4%]{2
Which from my dim understanding addresses em, en, flush and hair space , nonbreaking space ,figure space,third space--not sure of the rest. Really this is way over my head.
I know this will be a piece of cake for you guys
Thanks

A: Removing extra spaces from a long document

Peter is too modest, he's doing just great.
No space BEFORE-One Space after ---period,semicolon,colon, exclamation, question mark,CLOSING Parenth,Bracket,Brace, single & Dbl. quotation marks
Find (\s)([.,;:!\)\]\}~}~]])
Replace with $2
No space AFTER-One Space Before----OPENING bracket,brace,parenthesis,Dbl & single quotes
Find ([\[\{$~{~[])(\s)
Replace with $1
These remove the space before/after but do not automatically add a space after/before.
In the first case, you could add a space right after the '$2' in the Replace With string, but it already may have a space, in which case you suddenly have two. One alternative is to optionally remove it with the Find string (add it as an optional match) and always add it with the Replace string, but remember that this string will only be found if there is a space preceding it. That way you'd only check the space after in cases where there was a bad space before.
So I propose you add another two find/changes to add the space, only when necessary.
One Space After: find
([.,;:!$\]\}~}~]])(?!\s)
replace:
$0 [followed by one single space]
One Space Before: find
(?<!\s)([\[\{$~{~[])
replace:
[one single space] $0
Color-coding with my WhatTheGrep might make it just a tad clearer what's going on in that jumble of codes:
(1 [ .,;:! $ \] \} ~} ~] ] 1) (?!! \s !)
and
(?<!<! \s <!) (1 [ \[ \{ \( ~{ ~[ ] 1)
(Orange is lookahead/lookbehind, blue is a regular escaped character, pink is an InDesign special character, green is normal grouping parentheses, and lavender is a character group.)

How can you create a paragraph style that removes all spaces and forces everything to lower case?

Hi,
Is there anyway of using GREP (or some other magical wizardry) to create a paragraph style that automatically removes all spaces and forces words into lower case?
Strange request i know....I'm wanting to use it for datamerged email addresses.
Thanks

so doing it through InDesign is a work around I'm exploring.
Excel has the 'LOWER' function and the ability to record macros for a quick find/replace on the spaces - so that's definitely a good option if it can't be solved purely in InDesign.
You can change case via scripting in InDesign. This AppleScript (OSX only) will set the case of the selected paragraph style to lower. It would be possible to add some code that would strip spaces as well:
tell application "Adobe InDesign CS6"
    activate
        set StyleList to name of every paragraph style of active document
    set myDialog to make dialog with properties {name:"Document Paragraph Styles"}
    tell myDialog
        tell (make dialog column)
            tell (make border panel)
                tell (make dialog column)
                    make static text with properties {static label:"Choose a Style", min width:150}
                end tell
                tell (make dialog column)
                    set myPresetsDropdown to make dropdown with properties {string list:StyleList, selected index:0, min width:150}
                end tell
            end tell
        end tell
    end tell
    set myResult to show myDialog
    if myResult = true then
        --+1 gets the correct name because list starts at 0
        set myStyle to item ((selected index of myPresetsDropdown) + 1) of StyleList
    else
        return
    end if
    destroy myDialog
    tell active document
        set myStyle to paragraph style myStyle
        repeat with j from 1 to (count stories)
            repeat with i from 1 to (count paragraphs in story j)
                if applied paragraph style of paragraph i of story j is myStyle then
                    --defines a variable to replace the generic this_text parameter in the handler
                    set SCText to the contents of paragraph i of story j
                    set contents of paragraph i of story j to my change_case_of(SCText)
                end if
            end repeat
        end repeat
    end tell
end tell
on change_case_of(this_text)
    set the_comparison_string to "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
    set the_source_string to "abcdefghijklmnopqrstuvwxyz"
    set the_new_text to ""
    repeat with thisChar in this_text
        set x to the offset of thisChar in the_comparison_string
        if x is not 0 then
            set the_new_text to (the_new_text & character x of the_source_string) as string
        else
            set the_new_text to (the_new_text & thisChar) as string
        end if
    end repeat
    return the_new_text
end change_case_of

How to remove footer space in Table

I have created a table in main window. after creating main area section, the footer section is appearing as an empty at the bottom. I tried to remove this space by giving zero height to the footer height, but the value is not accepted by the system. How can I remove the space created by the footer?
rajan

Hi Rajan,
Can you please tell me how did you solve this problem ?
I am facing the same issue in smartforms.
Regards,
Nitin.

How do I remove a space before the first word in a sentence using find and replace or GREP?

Right, so I am laying out a document in inDesign from a word document and it has a space before every first word in a sentence. It is really annoying and I need a quick way to get rid of them. I wasn't too sure how to do it with find/change but I am sure there is a way in GREP if someone can help me. I have included an image so that people can see exactly what I mean.

The ^ location works for all paragraphs.
But a note to the OP, there is a sample script called FindChangeByList that removes leading and trailing spaces as well as extra spaces after punctuation, all in one go. But if you want to continue to use a GREP find/change to remove leading space, I'd modify Joel's suggestion to ^\s+ to get those cases where the user typed multiple spaces as well.
And don't forget there are actually legitimate places for leading tabs, which both the script and this GREP will find and remove, so be careful.

How to disable 'Remove Hidden Information' popup when closing PDF in Acrobat X on Mac?

How do I disable the function that causes the 'Remove Hidden Information' popup when closing PDFs in Acrobat X? I'm using OS X 10.9.4 on a Mac?
I've searched online and was directed to Preferences>>Security (enhanced) to uncheck 'Unable Enhanced Security', but it wasn't checked.
This box (see screen shot) opens each time I close a PDF. I'm forced to select an option before closing.
Please help.
Thanks.

Go to the menu Acrobat>Preferences
In the Preferences window's "Categories" pane, select "Document"
In the "Hidden Information" section deselect both check boxes
Click the OK button
You should be good now.

How to remove white spaces from XML content using Coldfusion?

Hi,
Can anybody help me in removing white spaces in between the tags from the below XML content using coldfusion?
XML content:
<?xml version="1.0" encoding="UTF-8"?> <chart showdates="true" today="08/12/2009"> <phases> <phase color="CCFFCC" name="Funded"/> <phase color="CDCD67" name="Concept"/> <phase color="99CCFF" name="Feasibility"/> <phase color="0099FF" name="Development"/> <phase color="0099FF" name="Development"/> <phase color="CC99FF" name="Close-out"/> <phase color="909090" name="Sustaining"/> </phases><program name=""> <project enddate=" 30/03/2007 " id="43250" startdate=" 28/02/2006 "> <version enddate=" 30/03/2007 " number=" 1" startdate=" 28/02/2006 "> <phase color="CCFFCC" currentdate="23/03/2006" name="Project Start" plandate="28/02/2006" type="phase"/> <phase color="99CCFF" currentdate="04/04/2006" name="Feasibility Closure" plandate="31/05/2006" type="phase"/> <phase color="0099FF" currentdate="29/03/2007" name="Commercialization" plandate="30/12/2006" type="phase"/> <phase color="CC99FF" currentdate="30/03/2007" name="Project Closed" plandate="30/03/2007" type="phase"/> <phase color="909090" currentdate="" name="Obsolescence" plandate="" type="phase"/> </version> </project> </program> </chart>
Output I am expecting is like below,
<?xml version="1.0" encoding="UTF-8"?><chart showdates="true" today="08/12/2009"><phases><phase color="CCFFCC" name="Funded"/><phase color="CDCD67" name="Concept"/><phase color="99CCFF" name="Feasibility"/><phase color="0099FF" name="Development"/><phase color="0099FF" name="Development"/><phase color="CC99FF" name="Close-out"/><phase color="909090" name="Sustaining"/></phases><program name=""><project enddate=" 30/03/2007 " id="43250" startdate=" 28/02/2006 "><version enddate=" 30/03/2007 " number=" 1" startdate=" 28/02/2006 "><phase color="CCFFCC" currentdate="23/03/2006" name="Project Start" plandate="28/02/2006" type="phase"/><phase color="99CCFF" currentdate="04/04/2006" name="Feasibility Closure" plandate="31/05/2006" type="phase"/><phase color="0099FF" currentdate="29/03/2007" name="Commercialization" plandate="30/12/2006" type="phase"/><phase color="CC99FF" currentdate="30/03/2007" name="Project Closed" plandate="30/03/2007" type="phase"/><phase color="909090" currentdate="" name="Obsolescence" plandate="" type="phase"/></version> </project></program></chart>
Thanks in advance,
Regards,
Manoz.

Daverms,
Thanks for the quick turn around..
I have applied the solution what you suggested above (<cfprocessingdrirective suppresswhitespaces="yes"), still whitespaces are existing in my output.
The output what I am getting is,
(blue color part is my output & red color indicates whitespaces)
<?xml version="1.0" encoding="UTF-8"?>
<chart showdates="true" today="09/12/2009">
<phases>
<phase color="CCFFCC" name="Funded"/>
<phase color="CDCD67" name="Concept"/>
<phase color="99CCFF" name="Feasibility"/>
<phase color="0099FF" name="Development"/>
<phase color="0099FF" name="Development"/>
<phase color="CC99FF" name="Close-out"/>
<phase color="909090" name="Sustaining"/>
</phases>
<program name="">
<project enddate=" 01/01/2010 " id="12059" startdate=" 20/06/2003 ">
<version enddate=" 01/01/2010 " number=" 1" startdate=" 20/06/2003 ">
        <phase color="CCFFCC" currentdate="20/06/2003" name="Project Start" plandate="20/06/2003" type="phase"/>
        <phase color="CDCD67" currentdate="" name="Concept Closure" plandate="" type="phase"/>
        <phase color="99CCFF" currentdate="20/06/2003" name="Feasibility Closure" plandate="20/06/2003" type="phase"/>
        <phase color="F0FF00" currentdate="" name="Alpha Test" plandate="" type="milestone"/>
        <phase color="F0FF00" currentdate="26/07/2004" name="Beta Test" plandate="31/05/2004" type="milestone"/>
        <phase color="0099FF" currentdate="29/06/2005" name="Commercialization" plandate="08/12/2004" type="phase"/>
        <phase color="CC99FF" currentdate="24/02/2006" name="Project Closed" plandate="01/01/2010" type="phase"/>
        </version>
<subproject enddate=" 16/10/2008 " id="11809" name="espWatcher Pricing Toolkit" startdate=" 01/08/2003 ">
<version enddate=" 16/10/2008 " number=" 1" startdate=" 01/08/2003 ">
        <phase color="CCFFCC" currentdate="01/08/2003" name="Project Start" plandate="01/08/2003" type="phase"/>
        <phase color="99CCFF" currentdate="" name="Feasibility Closure" plandate="" type="phase"/>
        <phase color="0099FF" currentdate="15/06/2005" name="Commercialization" plandate="08/12/2004" type="phase"/>
        <phase color="CC99FF" currentdate="16/10/2008" name="Project Closed" plandate="16/10/2008" type="phase"/>
        </version>
</subproject>
<subproject enddate=" 31/12/2070 " id="35704" name="espWatcher version 2 (2005)" startdate=" 01/01/2005 ">
<version enddate=" 31/12/2070 " number=" 1" startdate=" 01/01/2005 ">
        <phase color="CCFFCC" currentdate="01/01/2005" name="Project Start" plandate="01/01/2005" type="phase"/>
        <phase color="99CCFF" currentdate="01/07/2005" name="Feasibility Closure" plandate="01/07/2005" type="phase"/>
        <phase color="0099FF" currentdate="31/03/2006" name="Commercialization" plandate="31/03/2006" type="phase"/>
        <phase color="CC99FF" currentdate="31/12/2070" name="Project Closed" plandate="31/12/2070" type="phase"/>
        </version>
</subproject>
</project>
</program>
</chart>
However this solution removes most of the whitespaces, I want exact output as flash file is expecting so..
Where ever I am calling the CF functions, there I am getting the whitespaces. like below cases.
startdate="#getProjectStartDate(sProjectIdList)#" -> output I am getting for this statement is -> " 12/09/2009 "
Please assist me...
Regards,
Manoz.

How to remove empty space from a file

Hi all,
Can any one help on how to remove the blank spaces from a file.
I used trim function but unable to remove the spaces.
I have a file in which there is a name like 'JAIRAM' and am storing this file in a variable FILE_CONTENTS.
Now am unable to compare FILE_CONTENTS with another value as it is storing empty spaces also from the file.
Please help on this
Thanks,
Srini

Trim only trim at the beginning or at the end. Can you try using the replace sql function.. see below..
SQL> select replace('abc def',' ','') from dual ;
REPLAC
abcdef
cheers

Remove Hidden Information tool

Hi,
I would have a question regarding Acrobat's 'Remove Hidden Information' tool. Under Tools, Protection there is the 'Remove Hidden Information' tool. When I click it the results can be seen on the left side. Under 'Comments and markups' the sum of objects can be seen. I figured out that it detects bookmarks, links (internal, external) and objects described here: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7e7f.w .html.
But it also detects some other objects as well which I am not aware of (based on the number of objects detected). I also know that it counts 2 objects when using 'Replace text' from the link above.
Does anybody happen to know what additional types of objects does this tool detects and how to search for them in the document?
Thanks for your help,
Csanad
I use Acrobat version 10.1.5

The hidden text is the collection of glyphs on the PDF page that use text rendering mode 3 (no stroke, no fill).
Any links placed in association with such hidden text are not "hidden" (that is not how it works with PDF Link annotations - see ISO 32000-1:2008).
Any Link annotation placed in a PDF are the same as any other Link annotation (with the exception, of course, of whatever the link's Action happens to be).
So, no special sauce for links that were placed in association with now removed "hidden text".
In context of what you've written it may be that you will have to select - Ctrl+click the Link annotations of interest then tap the Delete key.
Be well...

Needs to remove Balnk spaces in the report next to data

Dear SDN's,
Report is displaying as below,my end user wants to remove blank spaces which has no data.
Ex: In C1 sales is 10,but profit is blank.so profit wont be display for C1.Similar for C2 sales wont be displayed & profit shoud display.
Customer      Sales      Profit
C1     10
C2          15
C3     20
We can do zero supression when we have '0' in the blank space.but we have 'Blank' not '0'.
We can remove the whole column when the whole column is 'Blank'.But is there a way if we want to not see the blank spaces.
Thanks and Kind Regards,
Lakshman Kumar G

Hi Lakshman,
To display Blank as Zeros,
The Fourth Value which u hve given i.e Zero as default text ,select this and in the below Field .e Show Zero ,type there as 0(ZERO).
Also alternate could be ,try this
Create a CKF for each KF with formula KF Not Equal to*0
OR
KF EQ 0*KF.
I am not suire on the Hiding of KF individually with Zeros Values.
Rgds
SVU

How do I remove the space key on my keyboard for cleaning underneath?

Don't. It will void the warranty. Take is to an Apple store or an AASP and have them do it.

Removing extra spaces from email attachment of text file

Hi All,
I am having a question in opening email attachment file in text mode.
Whenever I am trying to open a CSV file in text mode after each row it adds blank spaces. These blank spaces are to complete the 255 characters on each row I guess.
My client doesn't want these space. So can anybody tell how to remove those spaces?
<removed by moderator> response would be helpful.
Thanks and Regards
Nishad
Edited by: Thomas Zloch on Apr 28, 2011 4:02 PM - priority normalized

Hi,
There is no solution for this as u know that the data which you r sending in csv its actually getting populated from an internal table.
You cannot make your internel table dynamic for this requirment.
It should have a fixed length. Now if the data is less then also the length.
So u have identified correct that because of 255 the blank space is population, nothing is in your hand.
U have to convince the client, to make them understand where is the limitation.
Thanks & Regards
Prasenjit

Remove blank spaces in a text field?

How can I remove blank spaces in a text field? Some text fields have a lot of blank fields that need to be removed so that I can report only on the text.
CRXI
Edited by: Burton Roger on Feb 10, 2009 5:48 PM

Ex:
"Hi,
I have a need for monthly service desk reporting.
Please provide data on single sheet.
Thank you"
I would like to shrink it down to -
Hi, I have a need for monthly service desk reporting. Please provide data on single sheet. Thank you"

Remove hidden space

Similar Messages

Maybe you are looking for