Remove images from Library and Trash

I would like to be able to do this with one button to speed up editing.

If the originals are referenced when you empty the Aperture trash the confirm box will have a checkbox asking yf you also want to move the referenced originals to the system trash.
If you do not select this option the referenced originals are left where they are. If you of not see this option in the confirmation box then the originals in the Trash are not referenced.

Similar Messages

  • Remove images from library without deleting referenced files

    Hi,
    I cannot find solution: how do I remove images from Aperture library completely (all versions, etc), but keep the referenced master files? (all my images are kept outside aperture lib, as referenced masters).
    If I delete all versions and projects, they go to Trash, and attempting to empty the Trash brings only two options: delete permanently and move to system Trash. But I do not want to touch the referenced masters in any way. Is there a way to keep them safe, while emptying Aperture of all references to those files?
    Thanks.

    If the originals are referenced when you empty the Aperture trash the confirm box will have a checkbox asking yf you also want to move the referenced originals to the system trash.
    If you do not select this option the referenced originals are left where they are. If you of not see this option in the confirmation box then the originals in the Trash are not referenced.

  • Emptying Aperture trash doesn't remove images from library

    Not sure what's going on.
    Did a little house cleaning over the past few days and deleted about 2K images overall. And I emptied the aperture trash. The number of files in the program goes down. But the size of the library doesn't change. The date of for the library does change and shows the current time.
    I archived all my images to an external vault. That vault is significantly smaller than my library.
    Then I upgrade to the new version 3.1.2. Deleted preferences.
    I created a new library as a test. I imported 188 images. Then deleted a few. Emptied the aperture trash. The number of images went to 152.
    The size of my library remained unchanged. No aperture images in main computer trash can. And when I go into the masters folder in the library I see all 188 images there.
    System: mac pro 2006. OS 10.6.8

    Thanks for taking the time to reply.
    I don't remember which version I upgraded from. But the problem was there in the old version as well as the new one.
    I did do the repair rebuild just before upgrading with only a 0.1GB difference in file size afterwards.
    And, as I said, when creating a brand new library with only 188 images the same problem occurred. So 2 separate libraries on the same drive.
    I just created a new library as a test on my main drive (a different drive) with the same issue. Files are deleted in the program but not in the library.
    There is no problem with the trash in any other respects. Other files have been deleting just fine.
    The aperture deleted images aren't even reaching the trash can.
    I might need to reload aperture.

  • Capturing images from camera and uploading to sharepoint library automatically.

    Hello Everyone,
    My requirement is to capturing images from camera and uploading to sharepoint library automatically. No manual uploading will take place.
    Please suggest me.
    Thanks,
    Rajesh

    Hi,
    From your description, my understanding is that you want to capturing images from camera and uploading to sharepoint library automatically automatically upload images to SharePoint library.
    You will save images in your local computer after capturing visitors’ image. You could develop a custom timer job to periodically get pictures from the local folder in your computer. Please refer to this article:
    Create and Deploy Custom Timer Job Definition in SharePoint Programatically
    http://www.codeproject.com/Tips/634208/Create-and-Deploy-Custom-Timer-Job-Definition-in-S
    you could upload pictures to your SharePoint from the folder with C# code, please refer to this article:
    How to: Upload a File to a SharePoint Site from a Local Folder
    https://msdn.microsoft.com/en-us/library/office/ms454491%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    Best Regards,
    Vincent Han
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Hello, My Iphone is full with photos as it has my Photo library on it, I guess from Syncing it with my computer... How do I remove the photo Library and just keep the photos I take on my phone on my phone?  Hope that is clear.... :)

    Hello, My Iphone is full with photos as it has my Photo library on it, I guess from Syncing it with my computer... How do I remove the photo Library and just keep the photos I take on my phone on my phone?  Hope that is clear....

    Same way they got on your phone, through the iTunes sync process. With your phone connected, iTunes running, under the "Photos" tab, deselect the albums/folders/photos you do not want on your phone. Hit the "Apply/Sync" button & they will be removed from your phone.

  • How do I remove images from aperture?

    Totally new to apple and aperture so I apologise if this seems like a somewhat noob question but how do I remove images from aperture (using the latest version, 3.4.1)? Coming from a PC and using lightroom I'm used to being able to remove images in two ways:
    - removing the image from the "library", so that it no longer shows up in the program at all but is still on your hard drive (when I say removing it from the program entirely, I mean entirely, i.e. not sitting in a trash can or some other place where it's still taking up memory)
    - deleting the original image off the hard drive
    Is it possible to do either of these things in aperture, on both just a single image or a selection of multiple images, and if so how? I've tried googling this already and am getting a bunch of mixed solutions, none of which have really worked so far, so any answers would be appreciated. Thanks!

    The answer partially depends on whether you have a managed or referenced library. Since you're totally new to Aperture, I'm assuming you have a managed library since that's the default.
    FYI: Managed means Aperture handles image files and places them inside the library file. Referenced means you manage the image files and Aperture only points to (references) them.
    For a managed library, select an image you want to delete. Type command-delete. (That's the reverse delete key next to the "=" key). (You can also right-click an image and choose Delete Version) That will remove the images from their Project and place in the Aperture Trash. They're still taking up space in the Trash. If you really want them gone for good, right-click the Trash in the library pane and select Empty Trash. Poof.
    For a reference library, I forgot the exact details since I don't use this type of library, but you'll be asked (or can check a box) to delete the original file from the disk.

  • How do I remove images from Notes app?

    How do I remove images from Notes app?
    I sometimes find that, when cutting and pasting text from the web, an image is also copied (pretty much at all times I try and avoid this, but sometimes the selection process doesn't allow for fine enough control - e.g. a whole block of content may be selected, rather than just the few words I'm trying to copy).
    I then find, once it's part of my note, that I cannot select the unwanted image and remove it. Can anyone tell me if this is something that can be done, and if so... how?
    Thanks, Sebastain

    Hi Drew & Kilgore*
    Thanks for your replies. I also have and use Simplenote, although I went off it for a while, when it started crashing all the time on me. It seems to be more stable again now, so I'll start using it more regularly again, perhaps.
    I am, obviously, disappointed that one can't simply select ANY object within a Notes document and choose to delete it. As I rather suspected, the only solution is an annoying workaround. Apple stuff seems to get more like this as time goes by. At least in my experience.
    I solved the issue my own way in the end, but I guess it was close to your 1st idea DR, and your 2nd option, KT: I basically cut and pasted everything above, and then everything below, the image, and pasted both chunks of text into a new note. So it took two passes, and left me with the original note just displaying the image, which I then trashed.
    Tapping to the right of the image followed by deletion was what I hoped & expected would work. But instead the image stayed put and the text below the cursor would simply slide along the right hand side, moving upwards as I deleted! Most bizarre, to my mind at least.
    Anyway thanks for the feedback. But, for anyone else that might want to know how to do this, the answer is: NO, you can't select and delete an image once it's in one of your notes!
    * I quite recently watched the rather strange Bruce Willis / Nick Nolte 'Breakfast of Champions' movie... I think I still prefer the book to the film!

  • Removing Images from iPhoto

    I don't know how to remove images from iPhoto 8 or 6. I prefer to use PhotoShop Elements and I want to move the iPhoto images from wherever they are into a separdate folder so that I can put them into Bridge CS3 and use Elements. But I cannot figure a way to do this. Thanks.

    Terence
    I purchased the Duplicate Annihilator that you recommended and with about an hour it had detected almost 5,000 duplicates, so I went ahead and identified them, also did the thumbs and found about 300 there, so I put them in the trash and deleted all that came up and now I am down to 5,000 - pictures. I will run it again tomorrow
    Thank you for your help, and a bargain to boot, I must tell my Mac store about this!
    Very much appreciated.... the reason that I hesitated to bring over the old iPhoto is that a few months back a bunch of my pictures from there 'disappeared' -so I didn't want to import a corrupt application?
    Happy trails
    Jan

  • Remove movie from iTunes *and* disk

    Hi,
    I add movies to iTunes which are stored on a network drive, and are not stored in the iTunes library.
    When I remove these from iTunes, it does not trash the file on the disk.
    Is there a simple way to remove the movie from iTunes, and trash the file, all in one go?
    At the moment I do the following:
    - ctrl-click
    - show in finder
    - trash file
    - remove movie from iTunes
    This is a tedious process, especially when I want to get rid of multiple movies.
    I could probably write a script to do what I want, but surely there's a way built into iTunes, and I just haven't found it yet.
    Message was edited by: Luke Noel-Storr

    Beat you to it, but I'll give you credit anyway.
    For anyone else who's interested, this script seems to do the trick:
    http://dougscripts.com/itunes/scripts/ss.php?sp=deleteselectedfiles
    It's a bit slow though, and has too many dialogs for my liking, so I may edit it, to see if I can speed things up a bit.
    Edit: this script seems a bit quicker:
    http://dougscripts.com/itunes/scripts/scripts14.php?page=4#deletefile
    Message was edited by: Luke Noel-Storr

  • Remove photo from library

    How do I remove photos from library
    i help didn't work

    In iPhoto select the picture you want to delete and then push the delete key.  Then click on the iPhoto menu and click empty trash. 

  • Unable to remove image from photoshop

    unable to remove image from photoshop

    in the top line under adobe photoshop cs6
    the data of the 2 images appears if  i check the x it goes away  only to return the next time I close photo and reopen cs6
    same thing happens  if I close individually  or close all    seems that any I way close it  or empty  the data bar
    then close photo shop and reopen it  the 2 images are back   open photo shop from application in the application folder same thing
    cut clear grayed out under edit

  • Firefox upon opening an image in a new tab, centers the image from top and bottom and surrounds the image with a grey frame. Just started having the problem today, searched Google to no avail.

    Firefox upon opening an image in a new tab, centers the image from top and bottom and surrounds the image with a grey frame. Just started having the problem today, searched Google to no avail.

    Oh wow, looks like a new feature.
    The "page" links in a stylesheet with the address "resource://gre/res/TopLevelImageDocument.css". If you remove that reference, then the image displays in the old style.
    '''''Edit: Please skip the rest of this post and check out the next one.'''''
    There might be a more elegant solution than that, but you could use a bookmarklet to strip out that link when you want to view the page in its old style. A bookmarklet is a snippet of JavaScript you save on the Bookmarks toolbar for quick access.
    First, copy the following code to the clipboard (it's all one long line):
    <br>javascript:var ssheet=document.querySelector('link[href="resource://gre/res/TopLevelImageDocument.css"]'); if(ssheet)ssheet.parentNode.removeChild(ssheet); void 0;
    Next, if you are not displaying the Bookmarks Toolbar, use View > Toolbars > Bookmarks Toolbar to display it. (If you aren't using the classic Menu bar, press Alt+v to call up the old View menu. Right-clicking the gray area just below the page address also allows you to display the Bookmarks Toolbar.)
    Right-click on the Bookmarks Toolbar (or Mac equivalent of right-click!) and choose New Bookmark.
    Paste the code into the Location box (the second box).
    Then type a useful name in the Name box (e.g., Oldstyle Picture) and click Add.
    Now, when you want to tweak the image display, click the button to run the script.
    Manual clicking is a hassle, so it might make sense to look into other solutions. (Greasemonkey didn't seem to work; I think it might not run on .jpg files.)

  • I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

    I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

    If you have been backing up on Timemachine.
    All you need to do is enter time machine... Then the rest is obvious.
    Find the iTunes folder and hit 'Restor'.
    If not the only way to get all your iTunes music back is to enter iTunes Store.
    On the right hand side you should see 'Purchased'.
    Click 'purchased' and there you have it.

  • HT201441 Hi Just bought ipad 2 off someone they showed it to me working and the removed it from icloud and reset. now have started to setup at home and it is asking for an apple id he or i do not know what should i do ?

    Hi Just bought ipad 2 off someone they showed it to me working and the removed it from icloud and reset. now have started to setup at home and it is asking for an apple id he or i do not know what should i do ?

    Restore the Device as New.  See Section 6 here... http://support.apple.com/kb/HT4137
    Note:
    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818

  • A friend gave me her VAIO laptop.How can I remove her ITUNES library and use mine which I want to sync with my Ipad and Iphone?

    A Friend gave me her VAIO laptop.How can I remove her ITUNES library and use my library.  Want to sync my Ipad and Iphone to My library.

    I believe when you plug her old iPhone in to your computer it will notify you that the phone is synced with another library and ask if you want to register it with your library.  At least this is how iPods work.  I'm not sure about iPhones.  If you want to actually use the phone as your own you may need to go through AT&T.
    If you're just looking to use the iPhone as an iPod (without the phone portion of it) you may run in to some problems.  The iPhone really wants to be on a cell network all the time.  I think you'd have to jailbreak it to get it to work properly as an iPod.
    Let us know what happens when you plug the phone in to your computer.

Maybe you are looking for

  • HT3775 AVI Home Video no Longer Works with Lion

    Hi Everybody, I have quite a few hours of AVI files (family footage dating back to early 70's transfered to avi from Super-8). This worked before I updated to Lion. Now I get the message "The document xxxxxxxx.avi" could not be opened. A required cod

  • Very disappointed with G5 and Final Cut Pro

    At work we bought a G5 last year for Final Cut Pro to edit plain DV video downloaded from a MiniDV camcorder via Firewire. The machine has 4gig memory, 6800 graphics, and is running FCP 5.0 with all of the Software Updates installed. The G5 is suppos

  • Oracle Business Rules Custom Functions

    Hi, I have an input fact with attributes A,B,C & D and an output fact with E, C & D. (C & D attributes are common in both facts) Whenever the rule matches, we are asserting new output fact by assigning a constant value to attribute 'E' and also the t

  • MPEG-4 Encoding using Premiere Pro 2.0 ?

    Is Premier Pro 2.0 capable of encoding to MPEG-4, or do I need to upgrade to CS-4?  In Premier Pro 2.0 in the Media encoder all I see is MPEG 1 and MPEG 2, Flash, Quick time, etc.  The manual mentions MPEG-4 but does not say how to access it.

  • No signal with iphone 6 plus

    i have no signal inside the office while other phones have