Remove iPhone from case when charging?

Ok, this may be a dumb question, but I would rather post a dumb question than really mess up. Once I read somewhere to take my iPod out of its case when I charge it, I guess it keeps it from getting too hot or something. My question is, should I take the iPhone out of its case (Marware leather flip vue) when I charge it, either at home or in the car?
Many thanks in advance.
Jan3

The iPhone does not get particularly warm when charging, so it shouldn't normally be necessary to remove it from the case. If you're in an already-warm environment (e.g. a hot car) it's probably not a bad idea, though. High heat is bad for fully-charged batteries.
Hope this helps...

Similar Messages

How can I remove iPhone from iCloud when I no longer have the phone?

I switched to a Samsung S4 from my old iPhone 4S, but now I can not get text messages from any of my contacts who have iPhones. One thing I read to do/try was to remove my iPhone from my iCloud, but I no longer have the phone...how can I do this from my iPad?

Welcome to Apple Support Communities
iOS has got Messages app, which uses iMessage to send and receive messages. iMessage can only be used in iPhones, iPads, iPods touch and Macs, not on your Samsung Galaxy phone.
You need an iPhone, iPad, iPod touch or Mac to remove your iPhone's phone number from Messages. After getting one, open Settings > Messages > Send and Receive, and remove your phone number. After doing this, when one of your contacts choose your phone number in Messages app, it will send a SMS instead of an iMessage

Iphone get warm when charging?

so i have a agent18 case for my ihpne when i charge it gets warm is that normal?
also my wifi is on would it help if i turn the wifi off when not n use?
thanks

Yes, it's normal for the phone to get warm when charging; too hot to touch would be a problem. Good idea to remove it from the case when charging though.
And yes, get into the habit of turning off Wi-Fi and Bluetooth when not in use, as they are major battery drainers.
Hope this helps.
Message was edited by: jia10

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

See below if the search engine setting was changed without your knowledge and you can't change it back.
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

How to stop iphone from autoplay when plug into car audio system usb?

how to stop iphone from autoplaying when connected to your car audio USB ?

You need to remove the association that Windows has with that particular file type. To do that, you need to open Windows Explorer. From there, click on Tools, then Folder options. Click on the tab that is named file types. You then need to find the extension for the photos that appear in the iPhone, then click that registered file type. Once you do that, there is a section to select the program to open that file type with. You can click on the change button, and that will allow you to change the program that it opens with, or restore the default. There is also a box that can be checked to always use the selected program. If you unselect it, it will prompt you next time on what program to use.
Hope this helps.

HT1414 iPhone works okay when charging but often gets a white screen when I take it off charge

iPhone works okay when charging but often gets a white screen when I take it off charge - I have tried resetting it and getting help online but the system asks me for an email address and my iPhone isn't set up for emails yet - if I got a text to trigger the automatic diagnostic service I could retrieve it from my 'poorly' device

First, update iTunes, then connect the phone to the computer and do a restore. This will also get your iOS up to date. Your phone should operate correctly after doing this, if not, you will most likely need to have the phone serviced or replaced.

How to remove iPhone from a certain computer

How to remove iPhone from a certain computer along with it's ID to allow another phone to use the comp soley.

You do not need to do anything.
Simply stop syncing the iphone to the computer and begin syncing the new iphone to the computer.

My iPhone 4s restarts when charging?

My iPhone 4s restarts when charging ? Can anyone help before I give Apple a call. This happend a week already. Thanks

You need to read the User Guide. IT wiill show you step by step.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Premiere elements 10 downloads but will not open? info says to remove disc from desktop -- when i do that it closes the program?

premiere elements 10 downloads but will not open? info says to remove disc from desktop -- when i do that it closes the program?

Hi, Ken -
Since you have a new install of OSX, you may be missing Stuffit Expander, needed to expand downloads encrypted/archived in a Stuffit format. That problem confronted me with a new machine running OSX 10.6; a download and install of Stuffit Expander fixed it.
You can download Stuffit Expander from this webpage -
http://www.stuffit.com/mac-expander-download.html
Note - be sure to get the version that matches your OSX version.

I have problem with my iphone 4S when i put in it sim card from another country the iphone does not activate the serial No. DNTHNQZFDTD2 i bought my iphone from sweden , when i put in it iraqi sim card the iphone does not activate

i have problem with my iphone 4S when i put in it sim card from another country the iphone does not activate the serial No. DNTHNQZFDTD2 i bought my iphone from sweden , when i put in it iraqi sim card the iphone does not activate

What exactly happens?
Error message?
What does it say?
Please explain your issue.

Adhesive iPhone 5 case damage charging, Adhesive iPhone 5 case damage charging

I have an iPhone 5 I have got an adhesive case for it and it covers near my charging dock on my iPhone 5 so when I plug my charger in the case pushes the charger out slightly would it dmsge it in anyway please reply ASAP !? ;(

Thank you so much TnD1w
I also had this problem with all of my lightning cables, but did not realized it was simply dust in my iPhone port. I used a paper twist tie to remove gently the dust, and voilà, the port works fine now.

WCF Data services remove miliseconds from DateTime when expand

I get some strange behavior, when using WCF Data Services 5.6. In my case, I have table, with 1 column set with Concurrency=Fixed, and this column hold date time field from database, updated each time when row is edited. In case I just retrieve entity -
this column has correct value with milliseconds. But if I do mapping - milliseconds are removed.
Here is a issue at glance :
====================================================================
void Main()
var b = from p in TABLE1 where p.ID == 100 select p;
b.Dump();
Request in this case is : Data.svc/TABLE1(100M) And data returned from service is :
<d:COL1 m:type="Edm.DateTime">2015-02-16T12:13:52.972</d:COL1>
====================================================================
As you can see , here time is returned with milliseconds - .972 In other case :
void Main()
var tmp = from p in TABLE1 where p.ID == 100 select
new TABLE1()
ID=p.ID,
COL1=p.COL1
var a1 = tmp.ToList();
a1.Dump();
Request in this case is : Data.svc/TABLE1(100M)?$select=ID,COL1
<d:COL1 m:type="Edm.DateTime">2015-02-16T12:13:52</d:COL1>
====================================================================
Time is returned without milliseconds.
Does anybody have same problem? May be its a bug in the WCF Data services or in the model?

Ok, seems like I found an answer to this, or at least way to avoid the problem.
First I traced generated SQL from framework, and I see that in first case, im getting SQL
SELECT ID, COL1 FROM TABLE1
and in second case, I got
SELECT ID, CAST( COL1 AS DATETIME) FROM TABLE1
which cause the problem.
Then I tried to update EF to version 6, WCF Data services to version 5.6.3,
Oracle ODP to latest one, tried to use Oracle managed driver... no any success.
Then I played little bit with table definition, and I saw that my col1 with type TIMESTAMP in database and DateTime in the model was defined as NOT NULL.
If I remove this from database definition, I got right value with milliseconds.
So , may be this is a bug in Oracle driver, but probably this is a bug in the WCF Data Services. At least I found a way to use concurrency in my case with this solution.

Stop the iPhone from sleeping when in dock

Is there a way to stop the iPhone screen from going black when put in dock. I would like to use it as a clock while in the dock. I know that I can turn off the auto lock feature and get a clock app but i would rather leave the auto lock on if possible b/c some times i forget to lock it and put it down and it drains the battery. any ideas would be awesome.
Mark

If you leave the auto lock on, your iPhone will auto lock based on your chosen setting to auto lock automatically - hence the name for this setting, which is Auto Lock.
If you don't want your iPhone to auto lock, you must turn off auto lock. When auto lock is off, you can manually select the sleep/wake button to put the iPhone's screen to sleep.
Either that or get in the habit or re-enabling auto lock the first thing when removing your iPhone from the dock.

Can't remove iPhone from My Apple ID because it doesn't appear in Find My iPhone

I gave away my iPhone 5. It is now associated with someone else's Apple ID. It does not appear in Find My iPhone, but it DOES show up in My Apple ID. And so Apple wants to send verification codes to it.
I confirmed with the current owner that it is backed up and Find My iPhone is enabled. (But I'm sure it's associated with her Apple ID.)
The support documents suggest that the only way to remove it is from Find My iPhone. Is it now impossible to ever remove it from my Apple ID, since it doesn't appear there? Or is there some secret way to accomplish this?

IS your iMessage turned on, does it say activated, are you signed into it?
Settings > Messages > Make sure iMessage is turned on and DOES NOT SAY "waiting for activation"
Settings > Messages > Send/Recieve at > Make sure you're signed in and it shows your phone number checked
Tell me the results of this

How do i prevent removed apps from syncing when connecting to iTunes

I've "removed" apps from my iPad to free up space but when I connect to my computer, the apps "appear" to still sync.
To the upper right of the screen, it will show there are 65 apps (I removed 20 apps). These are active apps and that is correct When I click on the status bar at the bottom of the screen (the Apps section), it shows there are 85 apps taking up space on my iPad.
Also, where the apps are listed, the apps that were "removed" from my iPad air have an option to "Install". I don't understand why they're still syncing. TIA for your help!

This does not help but it does offer some insight. I have NEVER noticed this before. Take a look at the dialog box in the is screenshot. Note that it says that even if the app is deleted from the iTunes library, it will not be removed for any iOS devices when you sync.
As an experiment, I deleted the AOL On app from my iTunes library and followed the prompts to put the app in the trash - not keep it in the mobile sync folder. I synced my iPad - and the app is still on the device even though it does NOT appear in my list of apps in iTunes when the iPad is connected and selected. I have never seen that happen before.
If the app is not in your library, I always assumed that it would be erased when you sync since it is no longer in iTunes. I deleted the app in iTunes and then deleted it on the iPad and then synced again and now it is gone everywhere.
Bizarre....

Remove iPhone from case when charging?

Similar Messages

Maybe you are looking for