Remove IRM permission programatically in the web server using super account
Is it possible to remove IRM permission programatically in the web server via super account
Hello Tolab,
I'd suggest asking SharePoint specific questions on the
SharePoint 2013 - Development and Programming forum instead.
Similar Messages
-
Dreamweaver CS3 fails when publishing to the web server using WebDAV
Dreamweaver CS3 fails when publishing to the web server using
WebDAV
using an earlier version (7.x/8.x) works fine.
Does anybody know if there is a solution for this.. This is
urgent..
Attempting to call the 1-800-833-6687 number fails with:
recording, music, rings as though someone will finally answer, but
gets a few dial tones and connection goes silent..
Thanks
J.If all of your credentials are correct, Server Name/IP Address, Username, Password, Root Directory and it's still not connecting, I would try toggling the Passive FTP checkbox.
If you still can't connect in DW, try downloading a third party FTP program like Filezilla (free) and uploading there. If the third party app doesn't work either, there is likely a problem with your credentials and you would need to contact your hosting provider to straighten it out. -
Uploading a file to the web server
How can i upload a file to the web server using JSP.
hello sir,
Could U even tell me performance which one is better.
U have mentioned that Multipartrequest is Complex for Beginers,
but as far as performance is concerned which is better.
If Taglib is used is it error Free , as I do not know much abt taglib.
have just read a little abt it , have never created my own Custome Tag.
Could U just Guide me which is the best site where I could get know a little abt Taglib.An easy tutorial where I could read and start working on My application.
I have been given a Deadline. So Please help me man.
If U have the source Code for Uploading of a File Please Cut Paste it.
I have to finish the project on time .
Please
With Regards
Eklavya -
Thunderbird was working and then for no reason it stopped downloading emails from the web server. I can access my emails in the web server okay. I have tried to remove my account and then add it again as a new account but I get a message saying that Thunderbird cannot find the email server. I have also tried to uninstall and reinstall Thunderbird but with the same result. I have also tried to remove the default mail server but have been unable to do so. How can I fix this?
I figured out a workaround.... Since I can get e-mails to populate via iSync and my other computer is running Leopard (it's a powerpc chip and can't run Snow Leopard), I added the account on the other computer and got the new account to populate into my SL machine with iSync. I don't like that I can't actually add the account directly, but at least this got me working.
-
Published Flash module and 404 errors in the web server log
I’ve created a Presenter module, published it to my computer, and uploaded all the files to a web server. And it plays fine via the web.
The odd thing is a bunch of 404 errors in the web log:
10.1.2.104 - - [29/Jul/2009:10:36:00 -0700] "GET /repository/university/courses/3/flash/data/spk10821.1.jpg HTTP/1.1" 404 255 "-" 1166 419
10.1.2.104 - - [29/Jul/2009:10:36:29 -0700] "GET /repository/university/courses/3/flash/data/spk10821.1.jpg HTTP/1.1" 404 255 "-" 1166 419
10.1.2.104 - - [29/Jul/2009:10:36:57 -0700] "GET /repository/university/courses/3/flash/data/spk10821.1.jpg HTTP/1.1" 404 255 "-" 1166 419
In the data directory there is a file named spk10821.jpg that was generated by Presenter. The image is actually the presenter bio photo that would normally show up in the sidebar -- but no photo is there. The browser never requests the valid spk10821.jpg file, only the non-existent spk10821.1.jpg path.
Anybody know why this would be happening? I see in data/viewer.xml there is a tag for <image>spk10821.1.jpg</image> but I don’t know why Presenter would mention that file in the XML but generate a differently-named one in the publish folder.
I’m wondering if I should have the web server rewrite requests with the ".1.jpg" ending to get rid of the ".1" part so they will work.
By the way, this is with PowerPoint 2003 SP3 and Presenter 7.0.1.Hi Daniel,
I am assuming that you are using Visual Studio 2010 to target the .Net framework 4.0
Crystal Reports 2008 is not compatible with VS 2010. Use [Crystal Reports for Visual Studio 2010|Crystal Reports for Visual Studio 2010 Production Release Now AvailableCystlR%2528SAPWeblogs%253ACrystal+Reports%2529] to target .Net framework 4.0.
Deploy the application using the methods specified in the 'Deployment' section of the [CR for VS 2010 .Net SDK developer guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip].
See if you can reproduce the issue after redeploying the application as mentioned above.
Few questions-
- Is it the dev machine or production machine causing the issue?
- OS version?
- What does the application do? i.e. view, export, print report?
- Issue is with some reports or all the reports.
See if there is an image on the report, remove the image and add it as a picture object ' Insert --> Picture' from the CR designer.
Hope this helps,
Bhushan. -
How do you failover the web server?
I have 2 servers running the web server on them. If one of them fails how do I reroute the users requests to the other one, seamlessly to the user? I am new to using the web server so any help, even remedial would help!! Thanks!
Ya, thats part of the problem. Right now we are using Sun Cluster to provide a network resource that handles which web server is to handle the request. A virtual ip address so to speak. We'd like to stop using Sun Cluster as it's a bit unstable, ie reboots the cluster randomly without error messages or warnings. We'd like to just use the web server/application server clustering capabilities and eleviate the extra layer of complexity with Sun Cluster. I know Sun Cluster has a Web Server agent to do this, but that is why we're trying to not go down that road. It is starting to sound like we may have to though as buying additional hardware isn't an option.
-
Communication problem the web server extension (WGATE) failed to receive a
Hi,
When a user tries to access his timesheet he get the below error:
<b>communication problem the web server extension (WGATE) failed to receive a response from the ITS web service</b>
Only ONE user is getting this error. If everyone get\s the same we can check on the ITS side, but if only ONE user is getting it.
Please help.
Regards,
PKHI ALL,
Thanks for your time. The issue got resolved however without cheking the logs itself. The problem was with the scripfile. All other users and all other scripts were working, except one. And it got recified.
Regards,
P. Kumaravel. -
Connection from the web server to the database which is situated in another machine.
Thanks for the reply.
I need to know, whether there shold be a physical connection between the web server and database machine? or can we connect to the database machine through the web, if the database machine has a domain name? if there is a physical connection, we can use the jdbc/odbc connection. but if we are connecting through the web, how can I estblish the connection using a JDBC/ ODBC connection?
Regards,
GeorgeAs long as there's a network connection between the two machines, you should be able to make the connection. I'm not sure what the difference between a 'direct connection' and a 'connection through the web' is-- are you actually running a network cable from one machine to another?
When you cannot make the connection, are you able to do a 'tnsping' on the target database?
When you say 'connecting through the web', is it possible that you're going through a firewall? If so, the firewall may be blocking the ports you need to communicate on.
Justin Cave
ODBC Development -
Hi,
When the page is submitted for approval by using SharePoint OOTB Page Approval Workflow, it takes quite long time and prompt error message as below.
"The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailable.
If this problem persists, contact your network administrator."
It only happens in Internet Explorer version 8 and 9. IE version below 8 is not used in environment.
But it is working in Firefox.
Please help me on how to fix this issue.
Thanks.Hi Htet,
Here are some articles with the same issue message, you can check the setting of Link Translation rule in the ISA from below.
http://sharepointontop.blogspot.com/2012/06/form-cannot-be-submitted-to-web-server.html
http://bytelab.blogspot.com/2008/03/problem-submitting-infopath-forms-using.html
http://social.msdn.microsoft.com/forums/en-IE/sharepointcustomizationprevious/thread/84be34b3-b806-49ce-a5c2-b5ad8a1ff09f
Thanks
Daniel Yang
TechNet Community Support -
How can you display a dynamically loaded vi to the Web Server?
I am working with LabView 6.1 and the Web Server. I can call a subvi and have it display on a remote machine using a browser with no problem. But what I would like to do is dynamically load and run a vi and have it display on the remote computer using only a browser. I have tried a small example of a front panel that invokes the run vi method (and fp.open prop) on another vi when a button is pressed, but the invoked vi is displayed only on the local computer. Is there any way of viewing dynamically loaded vi's on a remote machine without having a copy of LabView running on it?
If i understand your question correctly, you want to monitor vi that are dynamically loaded on a remote machine without having LabVIEW installed on the machine from witch you want the monitor. I don't think it's possible how ever a good reference book would be Internet applications in LabVIEW. You can find it on BARNES&NOBLE.
Hope i could help -
On a Mac Mini server with OS X Lion 10.7.2, I am unalbe to get the web server working on port 80. It switches automatically to port 443 (https).
This situation complicates the access to FileMaker Web publishing, as I don't want my clients having to use https.
How can I change that? Does anyone know?
Thanks for any replyin the server: I checked the SSL certificate. Tried several configuration.
Well, that's a problem for a start.
Your port 80 connection should NOT use SSL. Port 80 is the standard HTTP port, not HTTPS and most applications that connect to port 80 will not expect to use SSL
If you want to run a site under both HTTP and HTTPS then you create two sites, one on port 80 without SSL and one on port 443 with SSL -
Imp:How to find out whether client authentication Enabled on the Web Server
Hi,
I am trying to find out whether the Client Authentication Enabled on the Web Server or not.
Reason for doing this, if we have two certificates in the key store which will authenticate the Web Server, JSSE Authentication will always take the first cert from the keystore. If the first Certificate is Expired, it will fail while doing the HandShake.
So if I can find out whether Client Authentication is Enabled or not, then I can prompt a dialog for the user to select the Certificate for the Hand Shake.
Thanks in advance for any Response,
Krish.AUTH_TYPE will tell you only if it SSL or not. It won't say whether the Client Certificates Required for SSL Connection.
Also, AUTH_TYPE is not part of the Http Headers.
If there is any other solution, greatly appreciated.
Thanks
Krish. -
Problem in starting the web-server after configuring .so on AIX
I am trying to configure a .so file in iplanet fasttrack web server 4.1 on AIX 4.3. I have build the .so file on IBM AIX 4.3. But while starting the web-server it failed to start.It fails when I include the following in obj.conf "Init fn="test-init" config="ConfigFile". While starting web-server I got the following :
server terminated (signal 11): watchdog is restarting it
failure: server initialization failed
Any pointers on this would be helpful.I got similar errors in the past when the web server process was running in the background. Sometimes shutting down WAS does not work.
Before you start WAS ensure that no java process is running or better try rebooting. -
Probloms in starting the web server
i am a peoplesoft dba. i am trying to install peoplesoft internet architecture.
the O.S is windows 2000, database is oracle, application server is using Tuxedo
6.5. the web server is weblogic 6.12. i have installed all the components and
am able to log on to the peoplesoft application in 3-tier mode.
now i am trying to set-up the 3-tier web connection. i have created a domain -
VISTDEV. the JSL port is 9000, HTTP port is 80. when i am starting the PIA service
through --- startPIA.cmd under my domain, i am getting the following error:
<Dec 26, 2003 12:24:19 PM CET> <Notice> <Management> <Loading configuration file
.\config\VISTDEV\config.xml ...>
<Dec 26, 2003 12:24:25 PM CET> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "PIA" for domain "VISTDEV">
<Dec 26, 2003 12:24:44 PM CET> <Notice> <Management> <Application Poller not started
for production server.>
<Dec 26, 2003 12:24:44 PM CET> <Notice> <WebLogicServer> <ListenThread listening
on port 8080>
<Dec 26, 2003 12:24:44 PM CET> <Emergency> <WebLogicServer> <Unable to create
a server socket for port: 443. java.net.BindException: Address in use: JVM_Bind
Perhaps another process is using port 443.>
<Dec 26, 2003 12:24:44 PM CET> <Emergency> <WebLogicServer> <The WebLogic Server
is no longer listening for connections. You should probably restart it.>
<Dec 26, 2003 12:24:44 PM CET> <Alert> <WebLogicServer> <Server shutdown has been
requested by system>
<Dec 26, 2003 12:24:44 PM CET> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
the DOS window closes after that. i am surprised how the port 8080 is coming into
picture.
can you please help in troubleshooting.Hi,
I suppose you have set the SSL port to 443 however, it looks like port 443 is
already in use by another process.
Regards
Mayur
"blue_jay" <[email protected]> wrote:
>
i am a peoplesoft dba. i am trying to install peoplesoft internet architecture.
the O.S is windows 2000, database is oracle, application server is using
Tuxedo
6.5. the web server is weblogic 6.12. i have installed all the components
and
am able to log on to the peoplesoft application in 3-tier mode.
now i am trying to set-up the 3-tier web connection. i have created a
domain -
VISTDEV. the JSL port is 9000, HTTP port is 80. when i am starting the
PIA service
through --- startPIA.cmd under my domain, i am getting the following
error:
<Dec 26, 2003 12:24:19 PM CET> <Notice> <Management> <Loading configuration
file
\config\VISTDEV\config.xml ...>
<Dec 26, 2003 12:24:25 PM CET> <Notice> <WebLogicServer> <Starting WebLogic
Admin
Server "PIA" for domain "VISTDEV">
<Dec 26, 2003 12:24:44 PM CET> <Notice> <Management> <Application Poller
not started
for production server.>
<Dec 26, 2003 12:24:44 PM CET> <Notice> <WebLogicServer> <ListenThread
listening
on port 8080>
<Dec 26, 2003 12:24:44 PM CET> <Emergency> <WebLogicServer> <Unable to
create
a server socket for port: 443. java.net.BindException: Address in use:
JVM_Bind
Perhaps another process is using port 443.>
<Dec 26, 2003 12:24:44 PM CET> <Emergency> <WebLogicServer> <The WebLogic
Server
is no longer listening for connections. You should probably restart it.>
<Dec 26, 2003 12:24:44 PM CET> <Alert> <WebLogicServer> <Server shutdown
has been
requested by system>
<Dec 26, 2003 12:24:44 PM CET> <Alert> <WebLogicServer> <The shutdown
sequence
has been initiated.>
the DOS window closes after that. i am surprised how the port 8080 is
coming into
picture.
can you please help in troubleshooting. -
Step by Step of how to Install and configure the Web Server Core 2008 R2
I encoutred a couple of problems installing a Web Server Core 2008 R2 edition including the remote connection and for people who are encountring the error :
"The WinRM client cannot complete the operation within the time specified" or the error : " Could not connect to the specified
computer. Details: Unable to connect to the remote server " I think those couple of video will be helpfull,
so I decided to record and share this experience with you by producing the server core from A to Z to avoid the headache that I encountred
during my experience. The lab environment is vmware but you can use hyper v or even physical lab if you want as the steps are the
same
http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
watch?v=5z1NiWUJdGU Wipe generation
watch?v=Q3BoLkWWAC4 hard disk preparation
watch?v=lOPvy-cn0Uk server core installation
watch?v=gTnOUJfRkDg configure the web server
watch?v=0ofvknXMNsc install .net framework in the webserver
watch?v=K4ADBzZeM6E install the web server role
watch?v=oGHC0sbe17Y remote control the server
watch?v=SpzAsRkjV40 continue the remote configuration
watch?v=XjPD8U_y29I Create and alias for the web server
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
Enjoy the vids
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.comHi MASNSN,
Thanks for your sharing =)
Maybe you are looking for
-
Unable To Export Using Internet Explorer 9 or Higher
My issue is this: I have a reportserver on an intranet which users have been using quite happily under IE 8, beacuse of legacy systems we are far from early adopters. I now have some users who have moved to IE 9, however they can now no longer export
-
Tax code is not reflecting in invoice
Hi Experts, Recently i have created VAT tax code 7k for condition type JIN6 with effect from date 01.04.2010. Old tax code there with end date as 31.03.2010. I have created material and order , i am trying to make the invoice of that. Tax is calculat
-
Dynamic Fields in Table control......
hi friends, i wan to knw , is it possible to add fields dynamically in table control? actually the requirement is like, it is not fixed how many fields will be their in table control, it may change depending upon date. so if u knw, please help me out
-
hi, i'm having great difficulties with my safari on my laptop it will not open at all and has been doing this for quite a long time now, can anybody help??!!!
-
White Space between Objects?
Alright, I seem to be having a problem to where there is white space between objects and no matter how many times I intersect paths I still have white-space between objects. Obviously if you are making some sort of illustration, even a pixel worth of