Remove Job from SM36

Hi Expert,
We have schedule a program with different variant and assigned under the SM36.
Because due to business request to modify some changes, some of the batch job report need to remove.
The problem now is when I open the SM36, all job is assigned with same program name, I'm not able to identify which variant is assigned accordingly. unless I click the Step and check the parameter assigned.
Is there any solution can listed all the parameter assigned under the program ?
We have more than 100 variant assigned. To open the step 1 by 1 might is not reality.
thanks.
rgds,
tee

Hello Tee, you can read the table "TBTCJSTEP" with the transaction se16/se16n, if you have authorization for these transactions.
Best regards Jerome.
Edited by: Jerome Moutreux on Sep 27, 2011 9:09 AM (correction of grammar and the orthography)

Similar Messages

Removing JOB From the Queue once executed

How do you submit a job so that it runs only once and then gets removed from the Jobs Queue ?
I am submitting a Job from a procedure and I want the job to be removed once it is run. Can the Procedure that is called in the DBMS_JOB.SUBMIT(...) call contain a line such as DBMS_JOB.REMOVE(JobID)? How will the procedure know what the JobID for that job is ?
Thanks.

Just don't specify a NEXT_DATE or INTERVAL (just use the first two arguments, JOB and WHAT) and that's exactly what will happen.
Richard

ABAP Program Names to Run V3 Jobs from SM36

Hi,
I would like to Schedule the V3 Jobs for SD, MM, PM and other Modules Throug SM36 , Can you please let me know the ABAP Program Names for all of them or can i have any PDF documents that contains this list?
I could abel to find only for SD I am using (RMBWV311) i need for others please.
regards
Krishna Mohan.

Hi Krishna:
The information below was extracted from the article by P Renjith Kumar (page 8).
"LO Extraction u2013 Part 4 Update Methods"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5039632a-c398-2d10-0aaf-97167a3de753?QuickLink=index&overridelayout=true
Useful reports in Queued delta
The deltas for logistics extractor are moved depending on the setup of Job Control in LBWE.To manually move the deltas we can run the R/3 programs depending on Application Components.Use the following programs to move the deltas manually.Go to transaction SE38 in R/3 and run the relevant program to move data from LBWQ to RSA7 .
u2013 02 Purchasing             RMBWV302
u2013 03 Inventory Controlling RMBWV303
u2013 04 Shop Floor Control     RMBWV304
u2013 08 Shipment               RMBWV308
u2013 11 SD Sales BW            RMBWV311
u2013 12 LE Shipping BW         RMBWV312
u2013 13 SD Billing BW          RMBWV313
Regards,
Francisco Milán.

Officejet Pro 8600 - Can't remove canceled job from print queue

Hi there
I canceled a print job from the print queue, but it refuses to budge! Everytime I try to remove it, I get this message:
I can print other documents, but it's very irritating having this here all the time (and a big red blob on my dock icon announcing a phantom print job).
Can anyone help me rid myself of this spectre of print purgatory?
Cheers!

Try downloading and running the HP Print and Scan doctor. This software is able to remove phantom print jobs for you automatically. The program can be downloaded from here.
As well, for Windows based computers, restarting the computer can also help with this issue oftentimes. Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Cannot remove clear a job from printer queue in Windows 7 Home Premium

printed a word document. document prints, but does not clear out of the printer queue. i have cancelled the print several times, but the document remains in the printer queue and reprints every time the computer is restarted. how can i clear this job from the printer queue?
This question was solved.
View Solution.

Hi,
From the Control Panel, open Administrative Tools and select Sevices. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the document(s) have been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hoiw to remove print job from queue?

How can I remove a "print job" from the queue. Selecting "cancel all printing jobs" will not remove it. It says it is deleting, it is not doing anything.   Help please.    As long as this job is showing the printer will not print anything else.

Hi Betty,
Welcome to the HP Forum.
The job queue may be stuck.
Switch off the printer
IF you are running a notebook, first do this:
Create a Restore Point:   Create a Restore Point – Win7 OR Create a restore point Win8
Close all your programs and Shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook model
Boot the computer and log in
OR
If you are not running a notebook, just
Create a Restore Point:   Create a Restore Point – Win7 OR Create a restore point Win8
stop all your running programs,
shut down completely
Boot the computer and log in
Switch on the printer and wait until it is all back up and running.
That probably won't fix the queue, but it will clear the rest of the cobwebs.
Next, try this:
Control Panel> icon view > Administrative Tools> Services>
Click on Name to sort the column alphabetically >
Scroll down and look for Print spooler> Highlight Print Spooler>
Click Restart the service
Click the Kudos Thumbs-Up to show appreciation and say Thanks.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround to your Question!
Kind Regards,
Dragon-Fur

Remove Reschedule jobs from Developer Reports Sever 6i

Dear All,
Please guide me how i can remove reschedule jobs from Developer Reports 6i
Regards
USMAN ALI

Install Forms in one directory (You can have reports in the same
directory).
Install oracle DB in another directory.
Don't change any file and reboot.
The listener will start automatically as a service.
(If not from a command line write "lsnrctl start" to start it).
To connect from forms/report to the DB you need to activate the
sqlnet easy config tool from the directory where forms is.
Follow the wizard to define an entry in the tnsnames.ora file
automatically.
Then you can use your forms with the DB.
(IF you get problems it usually helps to let us know the error
code you get so we can direct you in the correct direction).

Emailing the job of the report MCP6 from SM36

Hi,
i create a spool list in SO23 and i affected it to my job in SM36.
Then i scheduled the job.
After i cheked, when the job is terminated successfully. the job not appear in spool and i didn't recieved the mail.
What is missing?
thanks for your reply

Hi Sri,
According to your description, you want to deploy a report to different environment, then you want to change the datasource connection string dynamically.
In your scenario, you should make sure you are using a connection embedded in your report. Then you can create a report parameter, then specify the expression for connection string like below:
="data source=" & Parameters!ServerName.Value & ";initial catalog=<Your Database Name>"
Reference:
SSRS Report - Dynamic Connection String and Parameters
Dynamic Data Source for SSRS Reports
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Best app to remove duplicates from iTunes 2014

Hi All,
I've been trying to research the best application to sort and remove duplicates from my iTunes library. I have over 7000 songs and iTunes built in duplicate finder doesn't look at the track fingerprint, which is useful for those songs which are labelled "Track_1" etc.
Has anyone reviewed any recent products? I was looking at TuneUp, but after reading so many negative comments, I've decided not to go down that path. I would prefer a program that did most of the work for me, due to the amount of songs. Happy to pay for a good product...
I do have MusicBrainz Picard, which has done a great job of tagging, but don't remove duplicates.
Thanks in advance :-)

Tune up is a great app. When they moved from version 2 to version 3 is when it went to crap and all heck broke loose. They shut their doors but they have since re opened and went back to developing version 2. I use that version and I am pretty happy with it as being an overall cleanup utility. I also use Musicbrainz and a couple of other utilities but in the end if you have an enormous library 20k plus then you are going to have a few slip through. I would probably go with Tuneup if I were you and a thorough third party duplicate finder. Dupe Guru's music edition seems to do a pretty good job.

Submitting job from a procedure

Hi,
I need to submit a job and call it frm a procedure. I need to run the job exactly at 12 in the midnight. How will i pass the start_time to the job? the problem i face here is the procedure can be called on any date. following is the procedure
CREATE OR REPLACE PROCEDURE JOBS(DT NUMBER)
AS
L_JOB NUMBER;
BEGIN
     FOR I IN (SELECT JOB FROM USER_JOBS WHERE WHAT LIKE 'SPARCHIVE%')
     LOOP
           DBMS_JOB.REMOVE(I.JOB);
     END LOOP;
     DBMS_JOB.SUBMIT(L_JOB, 'SPARCHIVE('||DT||');', SYSDATE , 'sysdate+1');
     commit;
END;
/pls help me how to do it.
Thanks
Muneer

Current date and time
SQL> SELECT to_char(sysdate, 'DD-MON-YYYY HH24:MI:SS') FROM dual;
TO_CHAR(SYSDATE,'DD-
18-OCT-2004 13:13:09the previous midnight...
SQL> SELECT to_char(trunc(sysdate), 'DD-MON-YYYY HH24:MI:SS') FROM dual;
TO_CHAR(TRUNC(SYSDAT
18-OCT-2004 00:00:00the next midnight...
SQL> SELECT to_char(trunc(sysdate+1), 'DD-MON-YYYY HH24:MI:SS') FROM dual;
TO_CHAR(TRUNC(SYSDAT
19-OCT-2004 00:00:00Okay?
Cheers, APC

Creation of background job from SE38

hello all...
In the selection screen of my report program, there are two radiobuttons - read mode or update mode.
In read mode, the program reads an excel file and gives the output in teh form of errors, if at all, after some chekcs on this excel file.
In update mode, the program should check the excel file, get an internal table with errors from the excel file as well as run BDC for the correct records in excel file. So the output here has two blocks, first one - errors in excel file, second one - errors in BDC update.
But this update mode should run in background.
HOW TO CALL THE BACKGROUND JOB FROM THIS REPORT PROGRAMME when the update mode is selected??
Advance Thanks
omkar

Hi Vishal,
1. How are u running the BDC ?
2. If u are using call transaction syntax,
   then there is an extension to it.
    MODE mode
(See help F1 on call transaction)
The processing mode can take the following values:
'A' Display screen
'E' Display only if an error occurs
'N' Do not display
'P' Do not display; debugging possible
3. We can use N
4. N means, it won't display any screens
   of that BDC transaction.
5. It does not exactly mean the BACKGROUND JOB
   generated thru sm36.
Regards,
Amit M.
Message was edited by: Amit Mittal

Why do print jobs from Firefox create paper jam in my HP printer?

Running v3.6.13 in Win7 64-bit OS on HP laptop. Printer is a wireless networked HP Photosmart C7280. Print jobs from web pages result in a paper jam every time. Print jobs of documents from other applications as well as web pages from Internet Explorer all print normally. Jobs sent from 2 Macs in same network print normally. I think I've narrowed this down to Firefox being the only app to cause this problem.
The print jobs sent from the HP laptop send one blank page through the printer in front of each printed page. Printer properties, advanced, for the printer show a "separator page" for each print job which cannot be changed or disabled, AFAIK. The Firefox print jobs send the blank page correctly but the next page on which the job should be printed is the one that jams and stalls the printer. I remove the jammed paper, reset the printer and nothing more happens - the job is ended, nothing in the queue.

Hi @annmade ,
I will certainly do my best to help you remove the rest of the paper jam inside the printer.
I have provided some documentation for removing paper jams. Please go to page 69 of the manual.
HP Color LaserJet CP1210 Series Printer.
I would suggest to try running a plain piece of paper through, by running a cleaning page through the printer. It might help since you are unable to access the rest of the pieces of paper inside the printer. Resolving Print Quality Issues. Go to Solution six: Clean inside the product. I don't have any documents for disassembling the printer.
If the issue continues, please call our technical support at 800-474-6836, to see if they have a replacement option for you or a trade in option. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Remove DRM from Independent Labels

One way that Apple can show that it takes seriously the topics brought up in Steve Jobs's article, "Thoughts on Music", is to remove DRM from all material where the content producer did not specifically ask for it.
There are many independent labels who wish their music to be as open as possible to a broader community. DRM gets between them and their customers.
Please consider removing DRM from all content where the content producer did not request or require it.
Thank you,
Mike Shea

It wont happen. Apple has DRM accross the board is to offer a consistant product. Lets face the facts that if 90% of all music is required DRM (shot in the dark) people who dont get the DRM thng (most customers) will be totaly lost if only a few songs have DRM and others dont. Apple stripping DRM from music that doesnt require them means very little to the Recording companies anyway.

Can't delete jobs from Sun Update portal

I am unable to delete jobs from the Sun Update Connection portal. Here are the steps I take:
o Click on Jobs page. I have 186 pending jobs.
o I select a few of them and click on "View Jobs"
o I select the jobs and click on "Cancel Selected Jobs"
o I click on Yes when asked for confirmation.
After that I get the message below saying jobs were NOT cancelled:
"The following jobs were NOT cancelled."
Any ideas why I can't cancel any jobs?

HI,
This is still an issue and I would appreciate any help i could get. I don't want to reinstall the server including six zones.
Anyway, this is what i have done.
1. I removed the server from updateconnection
2. Waited 24 hours
3. Installed all patches using the script provided in another thread (http://forum.sun.com/thread.jspa?forumID=275&threadID=27716) This seem to be the only way to patch a system with zones
4. Logged in to updateconnection to verify that no servers were registered
5. Registered again using update manager
Now updatemanager shows 22 available updates but when i log in to updateconnection it shows 0.
This problem has been bugging me for quite a long time now and I would aprreciate if Sun could make an official statement about patching systems with zones. Is it supported or not?
In my particular case what would you recommend me to do?
Thanks
R

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Hi Chhayank,
the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
~Florian

Remove Job from SM36

Similar Messages

Maybe you are looking for