Remove ken burns effect from photos in iMovie HD

I am trying to burn iphotos slideshows to DVD like I used to do before newer versions stopped supporting iDVD. I was advised on this board to use iMovie HD and it seems to be working and I am pleased with the integration with iDVD. But when I used the ken burns effect on some of my slides I got a shimmering effect. So I tried to get rid of it. In iMovie HD, you are supposed to slect the media tab and click on "show Photo settings" This gives you a window where you can adjust the Kne Burns setting or uncheck the box. When I uncheck the box, nothing happens. Whther I press "update" or not, the effect is still there. This is a 1000-slide project. I hope I don't have to start over.
Thanks for any help.

Thanks for the response, butt.. this is iMovieHD (or version 6). There is no crop or fit tool in this version (as far as I can tell). There is a "crop" choice in the Edit pulldown menu, but I think that's for clips. And this verison doesn't give you boxes for the Ken Burns effect. These things are in later versions of iMOvie, but those versions don't integrate as well with iDVD which is most important to me.

Similar Messages

How do I remove Ken Burns effect from individual photos?

The instructions say to " In the Photo Settings window, deselect the Ken Burns effect checkbox and then click apply". My interface shows the word "update" instead of "apply" which has worked when I change other settings such as the length of time a photo is displayed. However every time I deselect KB...it comes back! I have also tried to constantly save the project, trying to save the deselect process.
Has anyone an idea? BTW the KB effect is very poor for most vertical pictures as it will cut off the top of the photo.
powerbook G4 Mac OS X (10.4.9) iMovie 6.0.3 version

• Yes, the Photo Settings window says Update instead
of Apply because you are updating an existing clip,
not importing a new one.
However every time I deselect KB...it comes back!
• Not sure exactly what you mean there. Do you mean
that in spite of unchecking the Ken Burns checkbox
the Updated clip doesn't change? It still has the Ken
Burns effect?
YES - see solution I found below.
If so, it sounds like iMovie may be failing to save
the updated clip to disk. That can occur if the
project resides on an external disk that uses the
wrong disk format. iMovie requires the Mac OS
Extended disk format. To check yours, see this:
http://discussions.apple.com/message.jspa?messageID=41
76921#4176921
I had our office software person check this out.
BTW the KB effect is very poor for most vertical
pictures as it will cut off the top of the photo.
• The Ken Burns effect can't read our minds. It only
does what we tell it to do. For photos that have a
portrait orientation it's normal to adjust the
zoom/pan so the rendered clip stays within the photo.
Note that it's possible to drag the photo in the
Preview window to adjust both the Start and End
points. So for a tall photo you may want to zoom/pan
up-or-down instead of side-to-side.
Note too that the settings in the Photo Settings
window always accept those settings of the last photo
we imported, updated or clip clicked on. So once
you've imported a tall photo with the Ken Burns
settings you like, you can easily apply those
settings for another photo. Just click on that
previously-rendered tall clip in the Timeline before
importing your next tall photo.
Karl
Karl,
Thank your for your input and in the last couple of days I have been able to produce the iMovie. But I now have another question about burning it.
Let me point out that I was able to deal with the Ken Burns issues by deleting the photos I wanted to change and replacing with new photos and using your tips + the help menu on "adding motion to your photos" to zooming right / left / vertically (which was very helpful).
Now that I have my project I cannot burn it as I get the following:there is not enough space to encode the aspects and in the pull down: "iDVD needs 2.350 GB of disk space to encode the remaining assets, but only 1.231 GB are available" I tried to cut down the files by deleting 5 chapters thus reducing the menu to one page showing chapters. I also re-saved the project with a new name.
BTW - I did burn it once but needed to fix it as the opening menu didn't have sound and I saw some other small photo details I wanted to fix. This version had 11 chapters on 2 menu pages with photos in the background. Essentially all I did was add a few more photos in motion and add the sound. That is why I thought maybe it was too much and removed the chapters saving one remaining page with music. I also do not have it on wide screen format as that uses more memory.
Can you help me with this? I don't understand why I'm getting the same message no matter what I do.
Many thanks,
Rozy

Removing Ken Burns effect once photo is on time line

I am using the lastest version of iMovie, I have made a movie using only photos. All of the photos have the Ken Burn's effect some are ok but other are not. Can the Ken Burn's effect be turned off once images are on the time line?

Found it. Select the photo on time line, highlight the adjust symbol in the upper right hand corner, highlight crop button and chose "fit" or "crop to fill".

Photo Settings not showing up; cannot remove Ken Burns effect

Hello,
Earlier today, I selected the photo setting button and a little box showed up with the Ken Burns effect options in it, however now when I select photo settings, the only thing that shows up is the preview of the of photo zooming/panning. Please help... how do I get back to that little box so I can remove the Ken Burns effect from my photos! Thanking you!

Also having the same problem. When going to show photo settings, it shows black screen. Un checking Ken Burns and updating does nothing. All photos in slide show have same super zoom of Ken Burns with no way to remove it or alter it.
iMovie HD broken, iMovie 08 ***... The only reason I purchased Mac was for handling media and I end up doing projects on my old pc using photoshop elements.

Black window when revising Ken Burns effects on photos

Can someone help overcome the black preview window when I try to revise settings for Ken Burns effects on photos in the timeline?
Many thx!
iBook 14 Mac OS X (10.4.9)

Are you trying to edit a previously imported image
rendered by the Ken Burns Effect? If so, there's an
iMovie bug that prevents you from updating the clip
when you empty the iMovie trash. It also turns the
preview black.
http://discussions.apple.com/thread.jspa?messageID=191
2675?
:)Sue
Yes, and thank you for the link to the thread. Since there are still varying results, I was hoping that Apple had published a patch or announced a new version that fixed this bug that is now very old. Fyi, my computer won't download the latest version, but my 'updater' says one exists.
Best regards.
iMac 17 Mac OS X (10.4.7)

Can I turn off the Ken Burns effect from all stills at once?

I am using iMovie 09. I am creating a slideshow. I want to turn off the Ken Burns effect from all stills. Is there a way to do this in one operation?
Mary Lou

Yes. Select one still. Open the Rotate, Crop, Ken Burns Tool on the middle Toolbar. Set it to FIT (for letterboxing) or to CROP (for it to fill the screen, but cut off the top and bottom). This will turn off Ken Burns.
Now select the photo you just adjusted and EDIT/COPY (or Command-C).
Now click EDIT/SELECT ALL (or Command-A) to select all photos.
Finally, click EDIT/PASTE ADJUSTMENTS/CROP ADJUSTMENTS to apply to all photos.

Ken Burns effect same in all iMovie 3.slideshow photos

I am working on a slideshow using iMovie 3.0.3. I am using iMovie because I have more than 99 photos, and would like the slideshow divided into chapters for iDVD viewing and navigation, and because I would like to add specific music to each individual chapter or slideshow, but have them play contiguously.
I have created separate albums in iPhoto for each chapter of my slideshow in iMovie. When I import all photos in an album from iPhoto with the Ken Burns effect box turned on and click Apply, each photo is imported, but the panning and zooming is the same on each photo, unlike when playing an iPhoto slideshow where the panning and zooming is automatically randomly applied to the photos in the slideshow. Am I doing something wrong and is there any way to correct this problem without manually setting the pan and zoom of each photo individually? Would a newer version of iMovie correct the problem?
Thanks,
Jennifer
iMac Mac OS X (10.4.6)

Hello Jennifer,
the behaviour of iMovie is quite normal as you will have to create a different setting for each picture in order to have a different effect upon import. up to version 5 (iMovie HD) this remains the same - and i'm quite sure also for iM 6, but haven't upgraded yet.
you have another possibility though: export your slideshow with random KB effects from iPhoto as QT movie and then import to iMovie
hope this helps
viva la mela

Ken Burns Effect Portrait Photo iMovie 08

Hello...
I'm trying to make a slideshow of photos in iMovie 08. In an older version of iMovie, I was able to apply the Ken Burns Effect on both landscape and portrait oriented photographs. In iMovie 08, the landscape photos are fine, but i'm having a problem on the portrait oriented ones. The red and green bars in the Ken Burns Effect only select a portion of the portrait oriented photos, so you only see a small section of the photo when using the effect. Please help.
Thanks,
Lauren

The Ken Burns effect in iMovie only pans over the photo pixels. And it only allows rectangles in the same aspect as the screen (landscape).
You can pad black space on the left and right in your photos using an application like Photoshop. so that the Ken Burns will pan over the entire photo
There is also a program called Automator which comes with your Mac. Automator has a "Pad Images" action which will add the black space to vertically oriented photos. With automator, you can batch any number of vertically oriented photos and pad them all at once.

I need to do non-constrained crops for Ken Burns effect in photo slide show

I am making photo slide shows in imovie '09. I understand the Ken Burns effect and how to set a start and an end point. I want to use the effect on vertical or portrait mode photos. i would like to have the entire photo displayed in portrait mode and have it zoom in a bit. The problem is The start and end points seem to only be horizontal or landscape mode. I can't ever get the entire image selected. How can I do this?
Thanks,
Tim

You need to add the letterbox (black space) in another application. iMovie's Ken Burns effect will not do it for you. You can do it in Photoshop if you like.
However, there is a way to do it in Automator, and you can do hundreds of vertical photos very quickly. That is the way I do it.
Here is more detail:
There is also a quick way to pad your images without using Photoshop. This method will pad hundreds of images in just a few seconds.
You do it with a tool that comes with OS/X called Automator. It should be in your Applications/Utilities folder.
Automator is basically a workflow tool. It allows you to string together commands and actions into a workflow and then execute the entire sequence at once. If you have Snow Leopard, you can even add these workflows to your contextual menus that come up when you right-click.
There are many workflows that would work to pad your images. Here is an example:
In Automator, start a photo workflow and drag the following actions into the workflow from the Action palettes on the left.
You should have something like:
1)Ask for Photos (You must select one or more photos and hit Select - you can make this easier by putting them in an album beforehand)
2) Copy Finder Items (give it a folder to copy to- so you can find them easily)
3) Pad Images. (put a check mark in "scale image before padding" Pick the pixel dimensions of your project...like 640x480 or 960x540. or 1920x1080
Hit Run and a dialog box will come up asking you to select photos. When you are finished, press SELECT and the Automator script will keep running.
Then at the end you should have padded images in the folder you created in step 2.

Ken burns effect deny photo import

Hallo I updated iMove to 6.03, but now if I make a project encoded for MPEG4, it doesn't permit import photo on project if ken-burn effect has been selected.
On iMove 6.02 it worked!
What can I do? or please how can downgrade Imove release to 6.02?
thanks in advance
peppo

THIS IS WHAT MY CONSOLE.LOG SAYS....Basically when the burns efffect works onthe preview, but when i hit play the image that was burnsed goes all back
2006-10-06 10:08:46.939 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:08:50.812 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:08:51.228 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:08:54.133 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:08:56.987 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:00.293 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:03.481 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:09.290 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:12.211 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:15.433 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:18.237 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:21.309 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:24.030 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:30.223 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:33.610 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:36.482 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:39.486 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:42.558 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:53.642 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:09:57.247 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:10:00.252 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:10:03.206 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:10:06.044 iMovie HD[214] Looked for URLs on the pasteboard, but found none.
2006-10-06 10:15:39.627 iMovie HD[214] Looked for URLs on the pasteboard, but found none.

How do I remove ken burns effect?!?!

Hi,
I have iLife 6.0.3 and I'm experiencing 2 problems.
1. iMove keeps on crashing on me, it seems like I have to close my eyes and pray that it doesn't crash before I get to save my project, which is most often than not.
2. Probably the most frustrating, is the Kens Burns Effect. I can not REMOVE, DELETE, GET RID OF IT! (I don't know any other way to put it) I just want it out of my original clip! I did everything the iMove Help suggested I do.
But there's no "Apply" it's "Update" and it did not work, and I did delete the transitions before and after the clip.
With the older version of iMovie this was not a problem!
Please please please help!!!
PowerBook5,6 Mac OS X (10.4.8)

Aha. That sounds like a different problem. There's a bug in iMovie 6 that affects the Updating of clips of images we imported with the Ken Burns checkbox ON.
Normally when we import an image iMovie keeps a copy of the image inside the project. It's retained so we can update the clip later.
Trouble is, when we empty the iMovie Trash iMovie inappropriately discards its copy of the image. Later, because the source image is not available, the Update button fails to update the clip selected on the Timeline.
The first sign of pending failure is that the Preview screen is black instead of showing the image. A moment later, when we press the Update button, nothing changes in the Timeline clip. iMovie fails to Update the clip, but with no error message.
There's no good workaround. One solution is to never empty the iMovie Trash. Then iMovie won't discard the image. (We can still select large clips in the iMovie Trash window and discard them individually.)
Another is to use the Finder to lock the image file inside the project so iMovie can't discard it. That's pretty inconvenient, however. (When I REALLY want to empty the iMovie Trash I use an AppleScript to lock all the images in the Media folder of the project before emptying the iMovie trash. More convenient. Most of the time, however, I just individually discard large items in the iMovie Trash.)
Does that sound like what you see?
Karl

Ken Burns effect makes photos shimmer when playing, Why?

When viewing a slideshow type project using the Ken Burns effect in iMovie,the photos sort of shimmer, which can distort the picture. Is this normal? Is there something that I am not doing, or something I can do to fix this problem?
MacBook Pro Mac OS X (10.4.7) 17"

Hi Tifany, there are MANY threads about this if you want to search for them.
First thing I will ask though is: are you using iMovie to create a STILL photo slideshow? If so, you will be disappointed with the quality. There are some photos that just seem to attract this shimmering effect, and others that dont. perhaps turn the KB OFF on the ones that do, and see if that makes a difference?
I personally have found that FotoMagico or iPhoto create better quality slideshows than iMovie (which is, afterall, a video editing tool).

Can i pan or create a ken burns effect with TEXT in imovie 11

fotomagico allows amazing movements of text
i movie i see works with the actual text but
how can i use the KEN BURN effect with TEXT
so it doesnt stay stagnant on the screen
aside from scrolling and drifting
gl

Hi
Or if You want to elaborate a bit more You can first
• make a project where You set text
• Then Export this as full quality QuickTime .mov
• Import this new clip and start a new project where You apply Ken-Burns
OR MAY BE doing it the other way around will work better - don't think that Ken-Burns can be applied last
AnyHow - by Export and Import as a part of process one can make extreamly complex sceens.
Yours Bengt W

Ken Burns effect causing photos to show static

As the subject line suggests I am getting a sizzle effect, like sparkling pixel static across my photos when the Ken Burns zoom is in progress. It is uniform across the entirety of the photo. THis is in imovie hd 6.0.4 on my new imac 21.5 with system 10.6.4 These are photos taken with 12mp dsl camera and I notice some other older photos taken with 4mp camera point and shoot do not show this distraction. Something up with the rendering of high res stills ? THis does not happen in Ilife 09's imovie.
Thanks for shedding any light on this anyone.

I had the same problem with iMovie 9. I found a solution that worked for me at http://discussions.apple.com/thread.jspa?messageID=12544852&#12544852

How do I get photos to automatically have the ken burns effect in final cut?

New to Final Cut Pro X- would appreciate any help. I have several photos and want to apply the ken Burns effect, but when I select all and apply the effect, they all have the same movement. Is there a way to have the automatically have the ken burns effect such as in iMovie 11?
Thanks!
SJB

It's a few more steps. But you could create a zoom-in for a clip on your timeline, copy it and then select every other clip that you want to zoom in on, and go to Edit>Paste Effects. The KB effect will be applied to each of the selected clips. Then do a KB reverse zoom with the clip adjacent to the first clip you copied. Copy that and repeat the Paste Effects process for the alternate clips. Hope that's clear.
Russ

Remove ken burns effect from photos in iMovie HD

Similar Messages

Maybe you are looking for