Remove Labeled Frame Not Working

Hi,
Please see below code and which is not working for me.
If myDocument.textFrames.item("myRemoveFrame") Then
delete
End If
Any one has any idea. What I am looking is to delete all text frame with the label name of "myRemoveFrame".
Regards,
Poo

Perhaps you should just tell what your code is supposed to be. I can only see it's not Javascript.
.. and which is not working for me. ...
That can mean anything. Why doesn't it work for you? Does it work for others? Does it work at all? Does it even compile?

Similar Messages

I got a vius and after removing Pro would not work, trying to reload and getting Error 1334, can someone advise me how to fix.

I got a vius and after removing Pro would not work, trying to reload and getting Error 1334, can someone advise me how to fix.

I downloaded, ran and restarted, tried to install Pro got same error
Thank You!
Robert W. O'Rourke
Tesla Systems, Inc.
<phone # removed - kglad>

Effects and key-frames not working on some clips Premiere CC 2014

Hi. I am having an issue where effects and key frames applied to both audio and video are not working, but only sometimes. Even after I render or export the video, the effects are not showing up. For example, trying to adjust volume using key-frames on some clips works fine, and not at all on others. The key-frames show up and I can see the volume changing in the effects panel, but it is not happening. Another example is changing the opacity on some video clips and it does not work sometimes. Same thing, I can see the key-frames and the values changing, but it's not actually happening. I have uninstalled and re-installed premiere pro and media encoder with no luck. I have uninstalled and re-installed the latest Nvidia drivers with no luck. Just to restate, this only happens on some clips and rendering or exporting the video does not help. My computer specs are:
MSI GT60 Laptop:
Intel Core i7 4800MQ (2.70GHz)
16GB Memory 1TB HDD 128GB SSD
NVIDIA GeForce GTX 880M 8GB
2880 x 1620 16:9 3K Display
Windows 8.1 64-Bit

Here is the exact screenshot. Now I'm also trying other effects as stated in my original post. But this effect is just an example. Is there really something that I'm doing wrong here? Or am I forgetting something? Is there some special "adobe doesn't let keyframes work on mpg's" rule or something silly like that?
I wish that I could post a video, but I don't know how.
Please let me know what I need to do to make this work properly.
TEX

Right click clip in sequence to remove attributes does not work?

Trying to get my old head around the three way color corrector. In the process when I try to right click a clip in the sequence to remove the attributes it does not work. When I do it again the filter square is still ticked. What am I doing wrong? Thanks for your help. The transition from Avid to FCP is not an easy one for me.

so someone else might be helped, you should link to the good captain's post or explain what you were doing wrong.

What's with Tracked Packet & Paypal Labels - still not working properly?

This is probably an old refrain, but honestly, how many months/years has it been since Tracked Packet was added to Paypal labelling, and it seems it's still not working 100% correctly. Case in point: I rarely use TP, but when I tried to change my listing's shipping type from Small Packet to TP yesterday while preparing a label, I got an error message saying the information was incorrect and I couldn't complete the process with TP. I used the back button, tried inputting the details again, still no go. Finally, I decided to back out completely, return to the Paypal transaction page and start all over. This time I was able to get the label done. So it seems that if any other shipping type is input first, you can't change your mind and switch to TP during the process. This has never been a problem with Expedited Parcel or with Xpresspost -- you can input the details, check pricing, then return and change the shipping type as many times as desired. I'm wondering if the problem is me and/or my browser (again??), or does anyone else experience this annoying glitch? BTW, Tracked Packet is an air service, right? If not, I may be in trouble. I ask this because I see the estimated delivery time is from 4 to 15 days -- quite a spread for TP U.S.A.

Tracked Packet has always done the error since it was introduced. If another shipping option is used when you go to PayPal shipping from eBay, switching to Tracked Packet does not reset the form from the service that you came into. You cannot see anything but the form has not been reset. To get around this is simple. You need to reset the form. A trick to do this is to go to the Service Type entry box, select "Select Type" as the service and click "Continue" at the bottom of the page. This will generate an error message at the top saying to "Please enter a valid service type." This resets the form to the starter defaults and now you can select the Tracked Packet service. All the information that was entered will not be lost. I posted this solution way back when this "glitch" was first mentioned years ago when Tracked Packet was introduced. It was sent to kalvin at the time but he left eBay and it was never fixed. It is hard to get things fixed on eBay.ca Canada but it seems impossible to get anything fixed on PayPal shipping for Canada Post shipping issues.

Set Stroke weight for a frame not working in CS4.

Hi All,
How to set Stroke weight for a frame.
I tried using CreateStrokeWeightCommand of IGraphicAttributeUtils, but its not working in CS4.
Regards,
Jasmine
Message was edited by: Jasmine_Shaikh

Hi All,
CreateStrokeWeightCommand of IGraphicAttributeUtils works only when if the frame has some stroke weight already applied to it.
So do i need to set something else before using CreateStrokeWeightCommand to make it work programatically on a frame with no stroke weight.
Jasmine

Hyperlinked button in scrollable frame not working

Hi all,
I'm working on a multi-article folio. The first article includes a scrollable frame that contains a group made up of one image and two buttons.
One of those buttons works correctly; that is, it is a mailto that brings up an email client when clicked.
The other button should open a web page in a separate window. However, when I click this button, I get the following error message:
Cannot Open Page
This page cannot be opened because of a error.
The error is "A server with the specified hostname could not be found." (-1003).
The odd thing is that another button in the second article that links to the exact same URL *does* work correctly. That article does not use scrollable frames; instead, the button is on top of an image sequence. I have very carefully copied and pasted the URL from the button that does work to the button that does not work. No joy.
Here's a screenshot of the first article that shows the non-functioning button outlined in a blue frame:
I am using InDesign CS6 (version 8.0) and Folio Builer
12.2.4.20120611_m_691037 8.0.7.21 .
Your help is much appreciated!

It happened to me too and the only workaround was that I copied the hyperlink text and created a separated text box and pasted the link.
I then made that textbox "fot frame to content". After that I created a button out of it and assigned the URL for it. After all this I pasted the button in the text as text object.
Here is a screenshot. This text was within scrollable frame

Flash Animated label cloud not working

Hai, i added this blogger cloud to ma blog
Blogger Tutorial that works through flash and works fine in my homepage but later on when the label is clicked the animated flash cloud does not work, what would be the reason, please someone help me.

onClick="document.frm1.newspaper.disabled=false"
It looks like you are using javascript. Flash forms use actionscript. It is a totally different beast.
UPDATE:
Never mind. My previous suggestion will not work because the radio fields have the same name. I am sure there are better ways.
But you could call a function onClick. One that changes the state of the select lists..
    <cfformitem type="script">
        function setListState() {
            newspaper.enabled = (lead.selectedData == 1);
            JCenter.enabled = (lead.selectedData == 2);
    </cfformitem>
   <cfinput type="radio" name="lead" label="Newspaper" value="1" onClick="setListState()">
   <cfinput type="radio" name="lead" label="Job Center" value="2" onClick="setListState()">
Message was edited by: -==cfSearching==-

Picture Frame not working

my picture frame is not working - when It's on dissolve and I turn it on, nothing happens. when set to origami, the page is blank. i can see the motions, but no photos. I have ensured that actual photos are selected, but it's not working.

A few things to try:
1) Hold sleep and home buttons until the shutdown screen appears. Slide to power off. Then press the sleep button to restart the ipad.
2) If that doesn't work, try a reset, but make sure you have sync'ed just prior to the reset. To reset go to Settings, General, Reset, Erase All Content and Settings. Warning: This will delete all data on the ipad.
If none of these work, contact an expert Apple person:
http://www.apple.com/support/expert/

Mouse Forward/Back Button - Frames not Working

FireFox 4 - The mouse back button (programmed Alt/left arrow + Alt/right arrow) does not support browser window with split panes - multiple scrolling window panes. The front/back mouse buttons works with the left window pane, but not the right frame does not work. This worked in previous version.

If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Crop images to frame not working?

I searched the forums for this, but did not find a thread that directly addressed this issue. When I export pdfs from InDesign CC(2014), and use the setting "crop image data to frames" checked on, but do not otherwise downsample or compress the images, the images are NOT cropped to the frame edges. I found this out with the "edit in Photoshop" from the tools in Acrobat Pro (XI). I have not tested with other settings for downsampling, as I don't want to downsample these images. These particular images are scans from a copier/printer - bitmap images. I understand that it does not work on vector data, but this is not vector.

Do You have to use "crop" or can You use "canvas size"? It's easily doable with a small script. Something like this
http://pastebin.com/r0EtBj1U
Copy the content, and paste it in a document with a text editor. Save the document as "MaxCanvas.jsx", and run it via "File -> Scripts" in Photoshop; or via an action or "whatever". Works like a charm but i only tested in Photoshop CC on Maverics.

Remove Element does not work

Hi Experts,
I want to loop over a node and remove all elements in this node if they don't match a certain pattern (which needs to be checked by getting the details o these elements).
So looping over the node and checking whether the pattern matches works pretty fine (I've checked by using a counter variable which counts the number of matches and compares to the total size of the node). But removing the elements does not work.
I always get the complete table as the result but not without all those elements I that they'd be removed already. I also check the success status (boolean) of the remove function and it delivers always "true" so it seems to work.
This is the relevant coding:
       for(int c = 0 ; c < wdContext.nodeMatnrlist().size() ; c++){
          wdContext.nodeMatnrlist().moveTo(c);
          GetMaterialDetails(wdContext.currentMatnrlistElement().getMaterial());
          if(!wdContext.currentMaterialDetailsElement().modelObject()
.getOutput().getMaterial_General_Data().getCreated_By().equals("BAIV-SS09-21")){
               success = wdContext.nodeMatnrlist().removeElement(wdContext.nodeMatnrlist().getCurrentElement());
               counter++;
any Ideas on this?
Many thanks in advance!
Cheers
Tobias
Edited by: Tobias Fickinger on Sep 4, 2009 7:04 PM

Hi Tobias.
Try this instead:
wdContext.nodeMatnrlist().invalidate();
Regards.
Julio Herrera

URGENT help for calling a window from a flash button in a frame not working

Hello, i'm really desperated, because i can't call a window
in a frame from flash with the getURL, i tried other but do
nothing! and something of external something doesn't work too, so
please can enya tellme what can i do???? i'm using flash 8
professional, explorer 6, (and let me tell you that i didn't have
issues before)!!

chen1 wrote:
> Hello, i'm really desperated, because i can't call a
window in a frame from
> flash with the getURL, i tried other but do nothing! and
something of external
> something doesn't work too, so please can enya tellme
what can i do???? i'm
> using flash 8 professional, explorer 6, (and let me tell
you that i didn't have
> issues before)!!
Please search the forum, in past weeks I personally replied
to the very same topic
few times.
Search for "Flash Player 9 - broken getURL doesn't open
specified frame"
and "Problems with flash navigation in Internet Explorer 7"
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

AS3 Timer to change frames not working correctly. PLS help

HI I am having a big of trouble with this code to change frames on my timeline. I thought my code below would work fine but its not. For some reason it will go to frames 1-4 (4 is the last frame) then it will go back to 1 again just fine as its supposed to... but then will jump to 3 then back to 1... all random instead of staying in sync. I have attached both my as2 version and my as3 version. My as 2 is working perfectly. I can define the amount of time a frame will pause for on each frame. ... the as3 though I am having no luck. Any help or advice would be appretiated! Thank you
here is my as 3 code;
stop();
var frameTimer:Timer = new Timer(1000);
frameTimer.addEventListener(TimerEvent.TIMER, frameChange);
function frameChange(e:TimerEvent):void
    if(currentFrame == totalFrames)
        gotoAndStop(1);
    else
        nextFrame();
frameTimer.start();
here is my as 2 code;
stop();
function GotoFrame ()
    StopTimer ()
    var frame:Number = _root._currentframe;
    var total:Number = _root._totalframes;
    var Next:Number = (frame % total) + 1;
    _root.gotoAndStop (Next);
function StartTimer (Time)
    _root.myTimer = setTimeout (GotoFrame, Time);
    _root.stop ();
function StopTimer ()
    clearTimeout (_root.myTimer);
    delete _root.myTimer;
StartTimer (1000);

Oh I didn't think about that! ... I suppose it is ok to overlook things like this while im still learning
Thanks for that answer. Perfect! .. that was driving me crazy.
any chance you could help me solve the next task of defining the amount of time each frame will pause on each frame. In my action scrip 2 code I could put timerFunctioName(5000); and it would pause only that frame for that amount of time and I was able to put different time pauses on each frame in this way.

Scrollable frame not working, why?

I did exactly what is instructed, grab the images and text and group them, create a frame then paste into that frame. Once I do all that the scrollable option is still greyed out, Why? someone help please!! thank you.
PS- I have CC and have the latest update.

Every now and again I've seen this happen. Try cutting content out of the frame and pasting it into a new one.
If that doesn't work, make very sure you have the container frame selected, not one of the content frames.

Remove Labeled Frame Not Working

Similar Messages

Maybe you are looking for