Remove left and right margin when display portlets

What is the best way to remove the left and right margin when display portlets?
I found a file called \portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\myportal\/
MyPortalContentView.cs
But I do not see a place for the left and right margins. What is the correct place to modify these margins? (How about the top and bottom margins too?)
See the green highlight?

That's it yeah, seems to curve upwards at the sides. Dunno whether leaving a heavy book on it might sway it back into position?!
I had the display upgraded when I bought it so presumed it could have been done whilst 'in operation'. Apart from that there's nothing wrong with it really, doubt it's something they would take it back on anyway.

Similar Messages

Enlarged photos show white borders on left and right margins

Should these white margins be present when viewed in enlarged format? I can't get rid of these left and right margins when printing 4x6 borderless format so I assume it needs to be corrected in iphoto first.

Did you crop your photos?
Most digital cameras use a 3:4 aspect ratio. When you print onto 4X6 paper, you will have bands on the sides of the photos. It's the same thing as watching a "letterboxed" movie on television with the bands at the top and the bottom.

How to adjust the left and right Margin in PDF

Hi,
I've a dashboard ,when i open this dashboard in PDf , left and right margin are not in sink. How to adjust those margins.
Thanks,
Malli

Hi,
there are only two joins available for InfoSet in BI.
For more details about Infoset joins you may refer following SAP documentation or serch at forums.
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/frameset.htm
I hope it will help.
Thanks,
S

Justify left and right margins of text

Is there any way to justify both left and right margins of text in the P Pro CS5.5 titler?
TIA

Colin,
That is correct. I would guess that it was added about PS ver. 4.0, when Text went from Raster to Vector, while working in the Image. The Paragraph Palette controls Justification.
Jay,
Thanks for the Feature Request. While I seldom alter Justification in Titler, there are some other aspects from PS (and AI and InDesign), that would be useful, such as full Alignment. I keep requesting that, plus some others (Spell Check would be nice, but even PS does not offer that... ), but so far, Adobe has either not been able to adapt Titler, or there have just been too few requests. As Adobe has added concentration on PrPro, it might well be that more requested features will begin showing up. Here's hoping.
Good luck,
Hunt
PS - for major Title work, I usually just go to AI, and then PS (or maybe only PS) to create them as PSD's. Titler is quite good, and so very useful, but when I want/need more, I just fire up another Adobe program.

How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard.

How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard. (I selected 'Fit to scale' and there's a huge gap on the top and bottom).

Those margins are usually reported from the printer settings to Acrobat. Meansif you have, for example, an inkjet printer and that printer can not print seamlessly, then there will be a minimum margin.
Check your printer's page settings.

Carousel Appearance. How to narrow Left and right margins (ADF 11.1.2)

Hello,
I need help to adjust the appearance of a carousel component.
As you can see in the picture i need more space for the current page of carousel (need to enlarge the current page) and i want to narrow the space marked with a red line (left and right).
Property settings available do not help.
Can anyone have an idea?
[http://i52.tinypic.com/28arlma.png]

Hi,
did you try skinning ?
http://download.oracle.com/docs/cd/E16162_01/web.1112/e16181/af_skin.htm#BAJFEFCJ
The skin tag documentation is here
http://download.oracle.com/docs/cd/E16162_01/apirefs.1112/e17497/toc.htm
Just have a look for what is available for af:carousel (and note the new skin editor)
Frank

How to add left and right margins in Topic?

Hi
I am using RH10, as part of TCS4. I am creating screen layouts by just modifying the existing ones.
I noticed that there is no margin/ space between the topic border and the topic content in it. When I searched for that in mobile.css, I did not find any relevant reference. When I did a Inspect Element on Firefox, it pointed to default.css which I don't find in my Project Setup pod.
How can I modify it? Here is the screenshot of the issue I am referring to:
Please advise.
Sreekanth

Or right click the css, click Edit With > HTML Editor and apply a margin left and margin right to the Body tag. That will affect all the styles in one go.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Split header at the left and right margins

I want to split my header where the book name is by the left margin and chapter title on the right margin. Is this possible?

Hi Jerry: This is my issue. As you can see, I have to tab over and then space over to get it over to the right margin. Seems like quite a silly issue, but I can't figure this one out! Also, in my format toolbar, I can't find the tab that's in your screenshot, nor do I find it when I go to customize toolbar. I'm sure this is an easy fix, and I'm overthinking it.
Thanks for responding.
Eleni

Changing left and right margins

I want to produce a document which will have the pages printed back to back and then bound.
I would like the margins on the inside of the pages to be wider than those on the outside. As I will be printing back to back this means the wider margin will alternate, on the left for p1, on the right for p2 etc.
As far as I can see this is not possible in Pages. Is the only way round this to basically produce two documents one for the odd numbered pages, the other for the even?

Yes it is possible in Pages.
It is called Facing Pages, which has been removed from Pages 5 along with 100 other features, but exists in Pages '08/'09.
Peter

Extending width all the way to left and right?

If you look into the website :
http://mcec.my/
You scroll down and under the sponsor section where you see a pink background, how do you extend the background all the way across the browser screen when the page load?
Because now the left and right side is white and looks weird...
Thanks for any help in advance

The reason that the pink area does not stretch accross the page is because it is constrained by the outer container div.
Your site structure is a typical method of centering a website in the browser. Everything gets placed in a container which is give a width and a left and right margin of auto.
The way to change it is to get that section of the page out of the container. Place it under the rest of the page in it's own container and then add the pink background to that. You might then need to put the content of that section in another div and use the same technique to centre it.
You can see that with the top section of the page, the effect is achieved with a graphic. You could to the same again with a pink graphic and then try to set that in the CSS. However, this won't be easy if the content of your pages changes.
Martin

Flash cs3: how to make moving/scrolling photo menu left and right?

http://media.moma.org/subsites/2008/miro/flashsite/index.html
- click continue, then relative size link
How can I do this with lash cs3: how to make moving/scrolling
photo menu left and right?
When you move left and right and paintings move. and when you
click on a painting, you see the the title and it links to another
page on the site.

scene_mc start at x = -550... x wide is 2164 px
now I have this and its working...
navL_mc.addEventListener(MouseEvent.MOUSE_OVER, navL_Over);
navL_mc.addEventListener(MouseEvent.MOUSE_OUT, navL_Out);
function navL_Over(e:MouseEvent){
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
                              navL_mc.addEventListener(Event.ENTER_FRAME, runL);
function runL(e:Event):void{
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
function navL_Out(e:MouseEvent){
          navL_mc.removeEventListener(Event.ENTER_FRAME, runL);
navR_mc.addEventListener(MouseEvent.MOUSE_OVER, navR_Over);
navR_mc.addEventListener(MouseEvent.MOUSE_OUT, navR_Out);
function navR_Over(e:MouseEvent){
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
                              navR_mc.addEventListener(Event.ENTER_FRAME, runR);
function runR(e:Event):void{
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
function navR_Out(e:MouseEvent){
          navR_mc.removeEventListener(Event.ENTER_FRAME, runR);

How to separate left and right audio channels?

I've imported some AVCHD footage that had audio recorded separately to each channel, left and right. When I put a clip in my timeline, I can separate the audio tracks, but I can't edit them individually. When I bring down the level to 0db on one track and play the clip, the audio meter still shows equal levels on both left and right channels. Any advice?
Second question - I transcoded some AVCHD footage to MP4 and can't figure out if the audio tracks remain separte after the transcoding. I used Free MTS M2TS Converter to do the transcoding. While I can choose 'dual mono" for an AVCHD clip, I do not have that same option for the MP4 clip. It offers me "6 mono" but not dual mono. Any advice?
My concern is that when I provide my clients with raw MP4 footage with right and left audio recorded separately, that they'll be able to edit each track individually.
Thanks!

Thanks Tom. I recorded 2-channel audio, not 5.1 surround. Six mono was only an option on the MP4 clip. I did change the channel configuration from stereo to dual mono on the AVCHD clip, but I still wasn't able to edit the audio independently. Even when I mute one track, the audio meter still shows equal left and right levels.

Block left and right swipe

Hi
I want to make a folio that uses buttons or vertical swipe to navigate. I don't want to have a horizontal swipe. I know that I can block it with MSO with left and right swipe slideshow, however if I use is buttons pasted into MSO work really bad. I discussed this issue in this issue here: http://forums.adobe.com/message/5849207#5849207 . When I want to walk around this problem and I add invisible button over the MSO - it unlocks blocked left and right swipe (when you do a swipe over the button that is not pasted into MSO then you are able to swipe left and right again).
Do you have any ideas how to solve this problem?
Best regards
Pawel

There isn't any way to do this. The MSO approach you read about is a workaround some people find works for their content, but it really isn't a solution.
Neil

Is there a way to tie to iPads together so that when you turn a page with a tap on one, both iPads turn a page. I am using the ipad to replace piano sheet music. The challenge is that ordinary sheet music is on both a left and right page.

We are trying to use an ipad to replace ordinary paper sheet music on a piano. When truning ordinary paper pages, it is sometimes hard to grasp one page, turn it quickly and get it to stay turned. The idea with using an ipad is that a tap turns the page, it stays turned. However,,,,,ordinary sheet music is on both left and right pages. With one turn you get 2 new pages. The ipad, being smaller results in only one page and therefore twice as many page turn taps; more taps equals less hands on the piano. If we could tie 2 ipads together and get them both to turn the page simultaneously it would be nice. We are trying to get used to using the ipad. We are using ForScore app to get sheet music into the ipad; we could load one with odd pages and one with even pages. Maybe this is getting too complicated.
Anyway to tie 2 units together
John

No way to control one device from the other. But, according to ForScore, you should be able to display two sheets side by side in landscape mode (2-up view)? Not sure if that helps as it must make the actual print smaller to do so.
http://www.forscoreapp.com/about/#interface

How to fill up my laptop screen with Firefox horizontally as it currently has a 3" margin on the left and right sides?tly has a

I just purchased a 17.3" screened-laptop using MS Outlook and Explorer 9 Browser. I cannot use Firefox as my default Browser because I cannot get Firefox to fill up my screen.When I open up Firefox, it maintains a large 3" margin on the left and right sides which does not exist when I open up Explorer 9. Increasing the font size only increases the text size vertically but does nothing to decrease the margin size horizontally.

You can use this extension to set a default font size and page zoom on web pages:
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Remove left and right margin when display portlets

Similar Messages

Maybe you are looking for